ロイヤル機器 Product Lineup

The "PPS-03 Series" is a sensor that detects raindrops, using a plate with excellent corrosion resistance for the electrodes. By connecting it to a converter, it can output a signal when raindrops are detected, allowing you to know the duration of rainfall. It comes standard with a heater. If the heater is off, the model number will be "PPS-03N." 【Features】 ■ Uses a plate with excellent corrosion resistance for the electrodes ■ Outputs a signal when raindrops are detected by connecting to a converter ■ Allows you to know the start time of rainfall ■ Available with and without a heater *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "WindSonic PGWS-100-3" is a next-generation anemometer that replaces the conventional small propeller-type wind direction and speed meters. The price is very low. Installation is simple, as it can be mounted by inserting it into a pipe. Output options include RS232C, RS422, and analog output. Measurement units and other settings can be configured from a computer. 【Features】 ■ No moving parts ■ Low starting wind speed ■ Maintenance-free and durable ■ Software-based configuration ■ Operating status code output ■ Continuous output from 0 to 360 degrees *For more details, please refer to the PDF document or feel free to contact us.

• Wind Speed/Volume Meter
• Other measurement, recording and measuring instruments

The "CMP-3B" is a sensor that measures global solar radiation (300–2800nm). It complies with the specifications of ISO 9060's WMO Second Class. It captures solar energy incident on the Earth's surface due to direct sunlight and scattering from the sky, outputting a current proportional to the solar radiation (W/m²). Additionally, it uses a thermopile with a black coating on the sensing element, which allows for a wider measurement wavelength range compared to solarimeters that use silicon photodiodes. Furthermore, the sensing element is protected by a glass dome with excellent spectral transmission characteristics against wind and rain. By installing a cover that shields the sensor from sunlight, the temperature rise of the main unit is reduced, preventing accuracy degradation due to temperature characteristics. 【Features】 ■ Measures global solar radiation ■ The main unit contains a desiccant, eliminating the need for desiccant replacement ■ The base unit has a built-in shunt resistor for sensitivity adjustment ■ Can be used in locations prone to noise from buildings, etc. ■ Built-in converter for 4–20mA current output *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "PCL-01B" is suitable for applications in illuminance control and microclimate observation, and it is an economically efficient illuminance sensor. The sensing element has a high spectral sensitivity characteristic due to the combination of a silicon sensor and optical filters. The diffusion plate used for light capture accurately captures illuminance. Calibration is performed through comparative testing with a standard illuminance meter. 【Features】 ■ Excellent cost-effectiveness ■ Sensing element combines silicon sensor and optical filters ■ High spectral sensitivity characteristic ■ Diffusion plate accurately captures illuminance ■ Calibration is performed through comparative testing with a standard illuminance meter *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "PRSW-1000" is a sensor that measures temperature, humidity, dew point temperature, atmospheric pressure, wind direction, wind speed, solar radiation, and rainfall intensity. The anemometer is ultrasonic, has no moving parts, does not require recalibration, and is essentially maintenance-free. The hygrometer is housed within a double-structured shield, protecting the sensing element from wind, rain, dust, and solar radiation while capturing changes in atmospheric conditions. The barometer uses a semiconductor sensor and is protected from wind, rain, and dust by a radiation shield and filter. The solar radiation sensor is of the silicon sensor type, with the sensing element protected by a glass dome, providing fast response and high durability. Rainfall intensity is measured using a tipping bucket rain gauge, which accurately measures rainfall. 【Features】 ■ Temperature, humidity, dew point temperature, atmospheric pressure, wind direction, and wind speed are measured by an integrated sensor. ■ Solar radiation and rainfall intensity are measured by separate small sensors. ■ All parameters are output as a current of 4-20 mA through a converter. ■ The hygrometer is replaceable. ■ Dew point temperature is calculated from the temperature and humidity measured by the hygrometer. ■ The output reset time can be selected from 1 minute or 10 minutes. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Thermo-hygrometer

The "PPR-01 Series" is a rainfall intensity meter developed based on a high-resolution tipping bucket rain gauge with a rainfall measurement of 0.1mm per pulse. It measures rainfall over 1 minute or 10 minutes and predicts the total rainfall one hour later. The measurement interval can be changed using the dip switches inside the converter. It is particularly suitable for opening and closing valves during rainwater collection and issuing rainfall warnings, and it adopts an output method that prevents valve hunting, making it resistant to noise. The conversion unit uses a CPU to output current and pulse signals, providing dual functionality in one unit. 【Features】 - Teflon-coated tipping bucket - Reed switch - Materials treated for rust resistance *For more details, please refer to the PDF documentation or feel free to contact us.

• Other measurement, recording and measuring instruments

The "CYG-5103LM" is a wind direction and speed meter that is highly resistant to environmental factors, compact, and lightweight, capable of measuring horizontal wind speed and direction. It was developed for use in marine buoys and floats, featuring excellent corrosion resistance, durability, and light weight. Most parts of the main housing, nose cone, and propeller are made from weather-resistant ABS resin. Additionally, wind direction is detected by a conductive plastic potentiometer inside the main housing, sensing a range of 0 to 10KΩ and converting it to a DC current output of 4–20mA. 【Features】 ■ Measures horizontal wind speed and direction ■ Highly resistant to environmental factors, compact and lightweight ■ Wind speed signal is output as a non-contact frequency conversion to a DC current signal ■ Wind direction signal is converted from resistance output to a DC current signal ■ Easy sensor installation and removal ■ Simple wiring through terminal blocks in the converter box *For more details, please refer to the PDF document or feel free to contact us.

• Wind Speed/Volume Meter
• Other measurement, recording and measuring instruments

It is a sturdy, accurate, and economical anemometer. It is made of stainless steel and aluminum, and it can measure over a wide temperature range from -50 to 70°C.

• Wind Speed/Volume Meter