ロジカルプロダクト List of Products and Services

This is a plate for mounting a high-precision 3-axis accelerometer with bolts. The diameter of the bolt holes will be prepared in the specified size. *There is also a plate that can be mounted with magnets.

• Other processing machines

This is a plate for mounting a high-precision 3-axis accelerometer with a strong magnet. *There is also a plate for mounting the accelerometer with bolts.

• Other processing machines

This is a power supply holder for the L-LOG series logger. Please prepare a separately sold CR-123A battery.

• Other processing machines

This is a reference sensor for the Wireless EMG Logger III. When using a two-pole type sensor, one sensor should be attached per logger. * It is recommended to attach the reference to areas where there is bone just beneath the skin, such as the wrist, ankle, pelvis, knee, collarbone, and elbow.

• Other processing machines

This is an electromyography (EMG) sensor for the Wireless EMG Logger III. Simply attach it to the muscle being measured and connect it to the Wireless EMG Logger III to easily measure the muscle activity waveform. *There are two types of wet EMG sensors: two-pole and three-pole. You can also choose between dry and wet types. *Disposable electrodes are sold separately.

• Other processing machines

This is an electromyography sensor for the Wireless EMG Logger III. Simply attach it to the muscle being measured and connect it to the Wireless EMG Logger III to easily measure the muscle activity waveform.

• Other processing machines

This is a mark switch that can be connected to a wireless 8-channel data logger. By turning the switch ON during measurement, a 1.5V rectangular wave can be input. It can be used instead of tagging when measuring simultaneously with other 2.4GHz series devices. *The color of the button may change. The wireless 8-channel data logger can connect up to 8 channels of analog signal input and is capable of wireless transmission and logging of data sampled at a maximum of 1kHz.

• Other processing machines

This is a switch for the trigger input of the synchronous pulse generator and the synchronous light-emitting device. By turning the switch ON, it can be used to start the sensor measurement or to turn on the light-emitting device. *When starting the sensor measurement: If you are starting the sensor measurement from the synchronous pulse generator II, the sensor must be in a state of having received the measurement preparation command. *The color of the button may change.

• Other processing machines

This is a foot switch that can be connected to a wireless 8-channel data logger. It is slim, allowing it to be stored in shoe soles and is very useful for walking measurements.

• Other processing machines

The goniometer features flexible and high-precision angular displacement measurement, making it a versatile angle sensor that can be widely used from industrial applications to measuring human movement. By combining it with our product, the "Wireless 8ch Data Logger," real-time waveform monitoring and data storage on a PC are possible. Furthermore, simultaneous measurement can also be achieved when combined with compact 9-axis wireless motion sensors or wireless EMG loggers. Features: - Precise reproducibility enabling high-precision measurements - Zero temperature drift - Lightweight and flexible mounting feel - High noise resistance - Excellent weather resistance - Long lifespan exceeding 1 million cycles - Low cost

• Other electronic parts

The 2.4GHz series sensors can be connected up to a maximum of 16 units, allowing for bulk data storage and bulk deletion. This is a set that includes a 16-channel USB hub and an application. Features: - Capable of reading up to 16 of our sensors - Automatic merging of CSV data with the same measurement time - Bulk storage and bulk deletion of multiple sensor data - Ability to specify data to be saved in CSV format Example: Only the acceleration data from a small 9-axis wireless motion sensor, etc. Compatible Sensors: - 2.4GHz series sensors * Excluding wireless strain gauge loggers * Please ensure that the connection is always wired.

• EAI/ETL/WEB application server

The wireless 8-channel data logger can connect up to 8 channels of analog signal input and is capable of wireless transmission and logging of data sampled at a maximum of 1 kHz. It can be used simultaneously with other 2.4 GHz series devices, serving as a trigger input or as a versatile logger for various applications. Measurement data is stored in the built-in memory, allowing for data retrieval after measurement. Real-time waveform monitoring is also possible. With the built-in rechargeable battery, it can operate continuously for 4 hours (at 100 Hz sampling). * Customers using the 2.4 GHz series for the first time must purchase the "Basic Evaluation Accessory Pack LP-WSEK03," which includes all necessary applications, drivers, and data transmission and reception devices. * This product is for the sensor only. * During wireless communication, data loss may occur due to interference, but complete data will remain in the built-in flash memory.

• Other processing machines

It is equipped with an accelerometer measurement amplifier and a constant current circuit, allowing for the connection of up to 4 channels of acceleration pickups. It can log and wirelessly transmit data sampled at a maximum of 20 kHz. It features a zero balance function. The wireless communication distance is approximately 50 meters in line of sight. The L-LOG (Lobg-LOging) series includes three types: "strain gauge logger," "thermocouple logger," and "piezoelectric accelerometer logger," allowing for simultaneous measurement of up to 25 units. Interval measurements and pre-scheduled measurements are also possible, making it suitable for various measurement applications. * Customers using the L-LOG series for the first time must purchase the separately sold L-LOG data transmission and reception device and the L-LOG battery holder for CR123A. * This product is only the sensor. (SD card included) Simultaneous measurement with other L-LOG series products is also possible.

• Other processing machines

The L-LOG thermocouple logger can connect up to 4 channels of thermocouples. It can log and wirelessly transmit data sampled at a maximum of 10 kHz. The wireless communication range is approximately 50 meters in line of sight. The L-LOG (Long-Logging) series includes three types: "strain gauge logger," "thermocouple logger," and "piezoelectric accelerometer logger," allowing simultaneous measurement of up to 25 units. It also supports interval measurements and pre-scheduled measurements, making it suitable for various applications. * Customers using the L-LOG series for the first time must purchase the separately sold L-LOG data transmission and reception device and either the L-LOG battery holder for CR123A or the L-LOG battery holder for TL-5930. * This product is a sensor only (SD card included). It can also be used for simultaneous measurements with other L-LOG series products.

• Other processing machines

This product is the Thin 9-Axis Wireless Motion Sensor Starter Set V2. It combines the Thin 9-Axis Wireless Motion Sensor V2 [LP-WSV202] from the 2.4GHz series with the High-Power Data Transmission and Reception Device [LP-RF24TR2]. This starter set is designed for customers who are using the 9-Axis Wireless Motion Sensor V2 for the first time. The "Thin 9-Axis Wireless Motion Sensor V2" retains the functionality of the "Compact 9-Axis Wireless Motion Sensor V2" while being half the thickness at 10mm. It can measure acceleration, angular velocity, and geomagnetism, each in three axes, allowing for easy measurement of the movements of machines and people. The High-Power Data Transmission and Reception Device can wirelessly communicate with 2.4GHz series sensors. The communication range can reach up to 50 meters in line of sight. *The 9-Axis Wireless Motion Sensor Starter Set V2 is available in both compact and thin versions.

• Image analysis software

Equipped with a bridge circuit and amplifier for strain gauge measurement, it can connect up to 4 channels of strain gauges. It is capable of logging and wirelessly transmitting data sampled at a maximum of 1 kHz. The wireless communication range is approximately 50 meters in line of sight. The L-LOG (Long-Logging) series includes three types: "strain gauge logger," "thermocouple logger," and "piezoelectric acceleration logger," allowing simultaneous measurement of up to 25 units. Interval measurements and pre-scheduled measurements are also possible, making it suitable for various measurement applications. * Customers using the L-LOG series for the first time must purchase the separately sold L-LOG data transmission and reception device and L-LOG battery holder. * This product is for the sensor only. Simultaneous measurement with other L-LOG series devices is also possible.

• Other processing machines

The synchronous light-emitting device is a device used in combination with a synchronous pulse generator to emit light at the start of measurement or at any desired timing. When using sensors and video cameras, it is important to determine where the synchronization point is. By combining the synchronous pulse generator with the synchronous light-emitting device, it will emit light at the timing of the measurement start. By capturing this light within the field of view of the video camera, you can identify the starting point of the sensor data measurement. If there is a device that outputs pulses, it can also be used in combinations other than with the synchronous pulse generator. This product is useful for synchronizing the timing between video equipment such as motion capture and our sensor devices. *BNC cables are sold separately.

• Other electronic parts

The Synchronization Pulse Generator II is a device that can output pulses in response to externally input pulses or initiate measurements with our company's sensors. The input pulses can trigger on both the H edge and L edge at 3V or 5V. The output side can also be modified in terms of polarity and voltage settings. By including the Synchronization Pulse Generator II in the field of view, it is possible to analyze the situation during measurements of our products through video analysis. The Synchronization Pulse Generator II outputs pulse signals at the following timings: - At the start of measurement - At arbitrary timings (e.g., when using a trigger switch) It can also be connected to other measuring instruments, allowing for various applications. Additionally, by combining the synchronization pulse generator with a synchronization light-emitting device, it will emit light at the timing of measurement initiation. By capturing this light within the field of view of a video camera, you can determine the starting point of the sensor data measurement. *BNC cables are sold separately.

• Other electronic parts

The 2.4GHz series sensors can communicate wirelessly. The data transmission and reception device is necessary for wireless communication with our sensors and loggers, which are equipped with wireless functionality. It is essential for wireless measurements. The communication distance is up to 50 meters in line of sight. *Note: The communication distance may vary depending on the surrounding environment.

• Other electronic parts

This product is the Compact 9-Axis Wireless Motion Sensor Starter Set V2. It combines the Compact 9-Axis Wireless Motion Sensor V2 [LP-WSV201] from the 2.4GHz series and the High-Power Data Transmission and Reception Device [LP-RF24TR2]. It is a starter set for customers using it for the first time. The Compact 9-Axis Wireless Motion Sensor V2 is a sensor that can measure acceleration, angular velocity, and geomagnetism, each in three axes. It allows for easy measurement of the movements of machines and people. The High-Power Data Transmission and Reception Device can wirelessly communicate with the 2.4GHz series sensors. The communication range is up to 50 meters in line of sight. *The 9-Axis Wireless Motion Sensor Starter Set V2 is available in both compact and slim versions.

• Image analysis software

This is an application that can read data from a small 9-axis wireless motion sensor during measurement, as well as raw data and computed data files generated by the [LabVIEW application], and perform 3D visualization. In addition to 3D visualization, it is capable of measuring the angles, roll, pitch, and yaw between two sensors. Features: - Real-time display of the sensor's angles: roll, pitch, and yaw during measurement - Ability to read and replay rotation matrix files, raw data, and computed data files - Capability to record arbitrary angle information or images during measurement or data playback - Output of the sensor's rotation matrix data and angle information

• Image analysis software

This is a lightweight sensor that integrates a wireless logger and electromyography (EMG) electrode circuit, making it easy to handle. Since it is controlled wirelessly, the subject's freedom is not restricted by cables. Additionally, the measurement data is saved to the built-in memory, allowing for data retrieval after measurement. Please choose between dry type and wet type according to your usage needs. ■ Dry type → Requires less installation effort and does not use disposable electrodes, resulting in no running costs. ■ Wet type → Directly attaches disposable electrodes, making it more hygienic compared to the dry type. Moreover, in dry conditions, such as during winter, noise can easily occur, making the wet type more useful. With the built-in rechargeable battery, it can operate continuously for about 4 hours (at 100Hz sampling). The memory capacity is typically 32MB (30 minutes at 1kHz sampling), but there is also a large-capacity version (18 hours at 1kHz sampling). Measurement data is saved to the built-in memory, allowing for data retrieval after measurement. The built-in rechargeable battery enables continuous operation for 4 hours (at 100Hz sampling). *An option with acceleration is also available.

• Other electronic measuring instruments

This is a lightweight sensor that integrates a wireless logger and a dry electrode circuit, making it easy to handle. Since it is controlled wirelessly, the subject's freedom is not restricted by cables. Additionally, measurement data is saved to the built-in memory, allowing for data retrieval after measurement. Please choose between dry type and wet type according to your usage needs. ■ Dry type → Requires less installation effort and does not use disposable electrodes, resulting in no running costs. ■ Wet type → Directly attaches disposable electrodes, making it more hygienic compared to the dry type. Additionally, in dry conditions, such as during winter, noise can easily occur, making the wet type useful. With the built-in rechargeable battery, it can operate continuously for about 4 hours (at 100Hz sampling). The memory capacity is typically 32MB (30 minutes at 1kHz sampling), and there is also a large-capacity version (18 hours at 1kHz sampling). Measurement data is saved to the built-in memory, allowing for data retrieval after measurement. The built-in rechargeable battery enables continuous operation for 4 hours (at 100Hz sampling). *An option with acceleration is also available.

• Other electronic measuring instruments

This is the series with the longest wireless range among our products. It is ideal for measuring the vibrations of bridges, structures, and buildings, and can also be used for earthquake measurement. Features: - By using the 920MHz band, it enables extensive measurements and simultaneous measurement with multiple sensors. - Equipped with the high-precision accelerometer M-A352 from Seiko Epson. - Being wireless makes installation and removal for measurement easy. - By continuously powering through a USB port, it can be used as an earthquake meter (with vibration trigger). - The wireless measurement system control application allows for real-time waveform display, FFT display, and waterfall display along with various settings. - The casing is waterproof and equivalent to IPX7.

• Vibration Inspection