WADECO List of Products and Services

The CDQ micro ranger "MWS-24RF-CDQ" is a microwave distance measuring device that consists of an antenna and controller designed for level measurement within the CDQ. It is mounted on the top of the CDQ to measure levels, allowing for the control of coke levels to extend the lifespan of the CDQ. For more details, please download the catalog.

• Distance measuring device

The "MWS-ST/SR-PG" microwave sensor for the coke oven extruder/guide car interlock device is a high-power opposing microwave sensor that confirms that the extruder and guide car have stopped in the same furnace and that the door is open. Unlike gamma-ray sensors, it does not require government permits or health checks for operators, making it economical. For more details, please download the catalog.

• Distance measuring device

The "MWS-24RF-CH" microwave distance meter for coke oven profile measurement (reflector method) is an FM-CW type device developed for measuring the profile of coke ovens, consisting of a controller, antenna, guide pipe, and reflector. It measures the profile while the coke, pushed by a pusher, passes through the guide vehicle. For more details, please download the catalog.

• Distance measuring device

The "MWS-24RF-CH" micro ranger for measuring the charging level in coke ovens (reflector type) is the world's first FM-CW microwave distance meter developed specifically for measuring the charging level in coke ovens, consisting of a reflector, antenna, and controller. Once the charging is complete and the sleeve rises, the reflector is moved above the charging inlet to measure the charging level, and after the measurement is finished, the reflector is returned to its original position. For more details, please download the catalog.

• Distance measuring device

The micro ranger "MWS-24RF-CH" for measuring charging levels is the world's first FM-CW microwave distance meter developed for measuring charging levels in coke ovens, consisting of an antenna and a controller. The antenna and controller are installed separately on the charging car via a coaxial cable. For more details, please download the catalog.

• Distance measuring device

The "MWS-24RF-2H" micro ranger for measuring the level of a ladle with a robotic arm is a level measurement device that houses an FM-CW microwave distance meter composed of a controller, antenna, and reflector within the robotic arm. Before blowing, the robotic arm moves the reflector to the lance position for measurement, and once the measurement is complete, it returns to its original position. The reflector is detachable, ensuring that even if molten metal falls onto it, the robotic arm will not be damaged. For more details, please download the catalog.

• Distance measuring device

The micro-ranger "MWS-10RF" for converter level measurement can accurately and quickly determine the lance position by measuring the molten steel surface level before blowing in the converter, as well as measuring the level of the bottom of the furnace. By always blowing at the optimal position, it is possible to improve quality. WADECO's mWave(TM) software continuously displays the received signal waveform, FFT spectrum waveform, and measurement trajectory, and allows for recording, playback, and fast-forwarding as needed. Using this recording and playback function, you can simulate and determine the optimal parameter values, as well as monitor, record, and replay measurement conditions. It has been delivered not only to Japanese steel mills but also to overseas customers. For more details, please download the catalog.

• Distance measuring device

The micro-range "MWS-24RF-TH" for measuring the top level of flat casting beds is an FM-CW microwave distance meter composed of an antenna and a controller. The controller can be installed away from the high-temperature area via guide pipes or coaxial cables. A reflector that is not affected by heat can be placed in the high-temperature area, while the controller can be installed in the ambient temperature area, allowing for measurements at high temperatures without a cooling device. For more details, please download the catalog.

• Distance measuring device

The micro-range "MWS-10RF" for measuring top-level cars is an FM-CW microwave distance meter composed of an antenna and a controller. The antenna and controller can be installed separately via a circular waveguide. The antenna, which is unaffected by heat, can be placed in high-temperature areas, while the controller can be installed in a room-temperature area, allowing for measurements in high temperatures without a cooling device. By adopting a rotating microwave method, it eliminates erroneous measurements caused by double reflection, and with intelligent and user-friendly software, the operating status can be monitored on a computer, with options for recording, playback, and fast-forwarding as needed. It can be used for measuring levels in high-temperature environments such as blast furnaces, converters, ladles in steel mills, and waste levels in incineration plants. For more details, please download the catalog.

• Distance measuring device

The 2D blast furnace profile measurement device "MWS-45RF-P2D" is an FM-CW millimeter-wave distance meter composed of an antenna and a controller. The controller can be installed away from the high-temperature area via guide pipes or waveguides. A reflector that is not affected by heat can be placed in the high-temperature area, while the controller can be installed in the ambient temperature area, allowing measurements to be taken at high temperatures without a cooling device. For more details, please download the catalog.

• Distance measuring device

The high-performance blast furnace sounding level gauge MWS-24RF-BH is a microwave distance measuring device based on the FM-CW method, consisting of an antenna and controller designed for level measurement inside the blast furnace. It is installed at the top of the furnace to monitor the operating conditions of the blast furnace by observing the rising and falling trends of iron ore and coke levels. For more details, please contact us or download the catalog.

• Distance measuring device

The high-temperature microwave sensor EK type extension kit easily penetrates molten ash and bricks. It has no welded joints and allows for flexible combinations. Additionally, it demonstrates excellent performance for detection in high temperature, low temperature, and thick-walled applications. For more details, please contact us or download the catalog.

• Sensors

The opposing microwave crane collision prevention sensor MWS-CAS-2A/B is an approach warning sensor that uses microwaves to prevent collisions of ceiling cranes and similar equipment. It is installed facing each other on two cranes on the same rail, and when the cranes approach each other and enter each other's detection area, they receive the microwaves transmitted from the other side and emit an approach warning signal. For more details, please contact us or download the catalog.

• Sensors

The reflective microwave position detection sensor MWS-ST/SR-2WG-R for steel equipment is a reflective microwave sensor composed of a transmitting antenna, transmitting controller, receiving antenna, and receiving controller. For more details, please contact us or download the catalog.

• Sensors

The microwave position detection sensor MWS-ST/SR-2WG is a counter-type microwave sensor composed of a transmitting antenna, transmitting controller, receiving antenna, and receiving controller. For more details, please contact us or download the catalog.

• Sensors

The microwave solid flow sensor MWS-DP-3-24V is a sensor that detects the flow of solids by applying the principles of high transmission power of microwaves and the Doppler effect. For more details, please contact us or download the catalog.

• Sensors

The microwave solid flow sensor MWS-DP-3 is a sensor that detects the flow of solids by applying the principles of high transmission power of microwaves and the Doppler effect. For more details, please contact us or download the catalog.

• Sensors

The microwave sensor MWS-24TX/24RX is a level switch of opposing type that utilizes the high transmission power of microwaves, consisting of a transmitter that sends microwaves and a receiver that receives them. It outputs a detection signal when the object to be detected accumulates between the transmitter and receiver. Due to its strong transmission capability, it can penetrate deposits, making it suitable for harsh environments without any problems. For more details, please contact us or download the catalog.

• Sensors

The microwave sensor MWS-CTX-1/CRX-1 is a level switch of opposing type that utilizes the high transmission power of microwaves, consisting of a transmitter that sends microwaves and a receiver that receives them. It outputs a detection signal when the detected object accumulates between the transmitter and receiver. For more details, please contact us or download the catalog.

• Sensors

The level switch microwave sensor MWS-ST/SR-3-24V is a four-channel type level sensor that utilizes the high transmission power of microwaves, consisting of a transmitter that sends microwaves and a receiver that receives them. It outputs a detection signal when the object to be detected accumulates between the transmitter and receiver. For more details, please contact us or download the catalog.

• Sensors

The 4-channel deluxe microwave sensor MWS-ST-2/MWS-SR-2 is a level sensor that utilizes the high transmission power of microwaves, consisting of a transmitter that sends microwaves and a receiver that receives them. It outputs a detection signal when the object to be detected accumulates between the transmitter and receiver. For more details, please contact us or download the catalog.

• Sensors

The microwave sensors MWS-ST-11/MWS-SR-11 are opposing microwave sensors that utilize the latest technology unique to wire devices that are well-versed in microwaves. They achieve a detection range of 100 meters with a detection surface of φ27mm, and no license is required. For more details, please contact us or download the catalog.

• High frequency/microwave parts

The ultra-high-speed millimeter wave distance meter, Milliranger MWS-45RF, is an FM-CW type millimeter wave distance meter consisting of an antenna and a controller. It can be installed away from the high-temperature area via guide pipes or waveguides. A reflector that is not affected by heat can be placed in the high-temperature area, while the controller can be installed in the ambient temperature area, allowing measurements at high temperatures without a cooling device. For more details, please contact us or download the catalog.

• Distance measuring device

The high-temperature equipment microwave distance meter, Micro Ranger MWS-10RF, is an FM-CW type microwave distance meter composed of an antenna and a controller. The antenna and controller can be installed separately via a circular waveguide. The antenna, which is unaffected by heat, can be placed in the high-temperature area, while the controller can be installed in a room-temperature area, allowing for measurements in high temperatures without a cooling device. For more details, please contact us or download the catalog.

• Distance measuring device

The microwave distance meter Micro Ranger MWS-24RF for powder and high-temperature equipment is an FM-CW type microwave distance meter composed of an antenna and a controller. The controller can be installed away from the high-temperature area via guide pipes or coaxial cables. A reflector that is not affected by heat can be installed in the high-temperature area, while the controller can be placed in a room temperature area, allowing measurements at high temperatures without a cooling device. For more details, please contact us or download the catalog.

• Distance measuring device

1. OK in harsh environments 2. High precision and high reliability 3. Monitoring operating and abnormal conditions on a computer 4. Equipped with convenient features 5. Achieved lightweight and compact design 6. Flexible adaptability

• others

It is hardly affected by dirt or contaminants on the detection surface, surrounding water vapor, or airborne dust; the detection area is wide, so angle adjustment during installation is unnecessary, eliminating any concerns about operational failures due to angle misalignment... etc.

• Distance measuring device
• Level gauges and level switches