チコーエアーテック List of Products and Services

The "SK-250(450,750)AT" is a dust collector with high air flow efficiency, suitable for use in general environments. The front panel is designed as a door, allowing for easy filter replacement. Additionally, the front panel is made of transparent polycarbonate resin, enabling visibility of the collection status of each filter during operation. 【Features】 ■ Compact and high performance ■ Front panel made of transparent polycarbonate resin ■ Primary filter: captures over 95% of particles at 45μm ■ Secondary filter (cylindrical filter): collection efficiency of over 99% for 10μm particles ■ Equipped with an AT panel for operation and status monitoring *For more details, please refer to the related links or feel free to contact us.

• Dust collector

The "CBA-080(500,1200)AT3-HI" is a high-pressure dust collector that can be used in clean rooms. It is suitable for removing adhered dust using small-diameter piping and slit nozzles. Equipped with an "AT3 panel" that allows for operation and status monitoring of the dust collector, it provides a wealth of information such as various pressures, blower temperature, and rotation speed. 【Features】 ■ Primary filter: 5-layer polypropylene non-woven fabric filter - Strong overall strength that does not easily tear like paper bags ■ Secondary filter: Pleated polypropylene non-woven fabric filter - Collection efficiency of over 99% for particles of 0.3μm ■ Can be installed in environments with clean class 100,000 to 10,000 ■ Equipped with AT3 panel/AD panel for operation and status monitoring of the dust collector *For more details, please refer to the related links or feel free to contact us.

• Dust collector

The 『CKU-080(240,450)AT3-HC』 is a compact dust collector that can be used in clean rooms and operates based on airflow. It is suitable for removing dust generated in production sites at the source of dust generation, and by using air blow in conjunction, it can also remove adhered dust. Additionally, it is equipped with an "AT3 panel" that allows for operation and status checks, providing comprehensive information such as various pressures, blower temperature, and rotation speed. 【Features】 ■ Primary Filter: A 5-layer polypropylene non-woven fabric filter - Captures over 95% of particles at 45μm ■ Secondary Filter: A pleated polypropylene non-woven fabric filter - Collection efficiency of over 99% for 0.3μm particles ■ Exhaust Filter - Can be installed in environments with clean class 100,000 to 10,000 *For more details, please refer to the related links or feel free to contact us.

• Dust collector

The "CKU-060AT3-ACC" is a dust collector designed for laser marking devices with relatively short operating hours. Compared to the CBA-750/1000/1500, it omits zeolite and is suitable for collecting low-adhesion fumes such as those from glass and metal. It is equipped with activated carbon, which provides excellent deodorizing capabilities. Additionally, the size of the suction port flange can be changed with a one-touch exchange. 【Features】 ■ The size of the suction port flange can be changed with a one-touch exchange. ■ Dust that collides and is cushioned by the special structure increases in particle size and is collected by the primary filter. ■ Fine particles that are not collected by the primary filter collide and are collected while passing through the granular activated carbon. ■ The entry of activated carbon particles into the blower side is also prevented by the tertiary filter. *For more details, please refer to the related links or feel free to contact us.

• Dust collector

The "CMP-2500AT3-A" is a dust collector suitable for situations that require a large airflow, such as when using a hood with a large opening area for suction or when branching off to multiple hoses for suction. The maximum airflow is 30.0 m³/min, and it is compact due to the high-efficiency PM motor. It can be installed in about half the space compared to a typical three-phase induction motor. Additionally, a flange is attached to the exhaust side, allowing for hose connection and outdoor exhaust. 【Features】 - Equipped with a high-efficiency PM motor - Designed to minimize dust dispersion during drawer opening and closing - Allows for outdoor exhaust by connecting a hose - Equipped with an AT3 panel - Capable of monitoring various pressures, blower temperature, and rotation speed - Optional Ethernet communication and RS-485 communication support available for separate purchase *For more details, please refer to the related links or feel free to contact us.

• Dust collector

The "CMP-1500AT3N" is a dust collector suitable for situations that require a large airflow, such as when using a hood with a large opening area for suction or when branching off into multiple hoses for suction. With the incorporation of a high-efficiency PM motor, it has been miniaturized, allowing it to be installed in about half the space compared to a typical three-phase induction motor. Thanks to its innovative design, dust dispersion during drawer opening and closing is minimized, and dust can be collected in a dedicated anti-static vinyl bag, making the replacement process easy. 【Features】 ■ Dust removal function (pulse type) ■ Easy dust box replacement ■ Equipped with AT3 panel - Allows monitoring of various pressures, blower temperature, and rotation speed - By using a separately sold remote cable, operation ON/OFF can be controlled remotely *For more details, please refer to the related links or feel free to contact us.

• Dust collector

The "Magic Ron MGC-180" is an all-stainless steel dust collector. It is compact and can be easily washed. It collects fine dust in the range of 27 to 31 microns, and the collected dust can be easily disposed of. Additionally, we also offer the ultra-high pressure dust collector "CBA-1600MG series," which does not clog for long periods. 【Features】 ■ All stainless steel: Can be washed completely ■ Spark suction: Captures spatter from laser welding ■ Easy waste disposal: Collected dust can be easily discarded ■ Fine dust collection of 27 to 31 microns: 98.6% recovery rate with JIS Kanto loam types ■ Low cost *For more details, please refer to the PDF document or feel free to contact us.

• Dust collector

This catalog introduces the "Dust Collectors for Onboard Secondary Batteries" handled by Chiko Air Tech. We offer a lineup including the "SHP-1200AT3," which is suitable for winding plate rollers and separator rollers, as well as the "CBA-1200AT3-HI-V1." We respond to the need to "remove fine dust generated during the manufacturing process." 【Featured Products (Excerpt)】 ■ Dust collection during winding of plate rollers and separator rollers ・ High-pressure separate dust collector "SHP-1200AT3" ・ Compact high-pressure dust collector "CBA-1200AT3-HI-V1" ■ Dust collection for transport pallets ・ Compact airflow dust collector series "CKU-240AT3-HC/CKU-450AT3-HC" *For more details, please refer to the PDF document or feel free to contact us.

• Dust collector

If fumes and dust generated during marking and processing are left unattended, they not only adhere to the workpiece and inside the workbox but also adversely affect the laser lens. Chiko Airtech's Laser Clean uses zeolite for the primary filter protection, ensuring that fumes do not clog the filter directly. In this guide, we introduce products with a wealth of experience in the manufacturing processes of electronic components and automotive parts, such as the "CBA-1000AT3-HC-DSA-V1" for laser marking and the "CHP-1200AT3" for laser processing. Please use this information for product selection. [Contents] ■ The importance of dust collectors in laser processes ■ Chiko Airtech's Laser Clean ■ Do you know about fumes? *For more details, please refer to the PDF document or feel free to contact us.

• Dust collector
• Laser marker

The 『CHV-030AD-HI-V1』 is a super compact high-pressure dust collector that can gather foreign objects with higher suction power. With a maximum static pressure increase from "5.2kPa" to "8.5kPa," the dust collection capability has significantly improved. It is suitable for situations where you want to collect dust from transport rails or use it handheld. 【Features】 ■ Operates on DC-24V ■ Remote control capability ■ Significantly improved dust collection ability ■ Reduced noise level from "58-70dB" to "58-68dB" ■ Collects foreign objects with higher suction power *For more details, please refer to the PDF document or feel free to contact us.

• Dust collector

The "CHP Series" is a dust collector that realizes visualization. Equipped with an automatic pulse dust removal function, it can detect abnormalities and confirm operational status. Additionally, we offer models such as the "CHP-1200AT3," which maintains suction power for extended periods, and the "CHP-1500AT3," which is ultra-high pressure, strong against loads, and suitable for dust collection in branches and narrow piping inlets. 【Features】 ■ Ability to detect abnormalities and confirm operational status ■ Automatic pulse dust removal function ■ High performance with maximum static pressure of over 10 kPa ■ IoT compatible ■ Controllable via communication options such as Ethernet ■ Centralized management of necessary information *For more details, please refer to the PDF materials or feel free to contact us.

• Dust collector
• others

This catalog features products from Chiko Air Tech Co., Ltd., which manufactures and sells small dust collectors, laser cleaners (dust collectors), and high-performance filters. It includes the "CKU series," a compact and high-performance small airflow dust collector that can operate continuously for 24 hours, as well as high-pressure separate dust collectors equipped with high-pressure brushless motors. [Contents] ■ Small airflow dust collectors ■ High-function dust collectors ■ Compact simple dust collectors ■ Ultra-compact high-pressure dust collectors ■ Medium-sized dust collectors, etc. *For more details, please download the PDF or feel free to contact us.

• Dust collector

The 『CBA-1200AT3-HI-V1』 is a high-pressure dust collector that sucks up fine dust and other particles with the power of a vacuum cleaner. By adopting a brushless motor, it achieves a high suction static pressure of up to 13.5 kPA. It can be used with the same performance at both 50/60Hz. Additionally, its compact design contributes to the miniaturization of the equipment. It is suitable for removing adhered dust using small piping and slit-shaped nozzles. It can be used in clean rooms (Clean Class 100,000 to 10,000). 【Features】 ■ Compact and high-performance ■ Continuous operation for 24 hours ■ High-pressure type ■ RoHS compliant ■ For clean use *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment
• Dust collector

The "CBA-1000AT3-HC-DSA-V1" is a laser clean dust collector that maintains suction power for extended periods, even under conditions prone to filter clogging, such as the suction of highly adhesive fumes generated during the laser marking process. This product employs a patented cassette-type filter that integrates a filter and a fume adsorbent zeolite. By utilizing the suction air to lift the zeolite and instantaneously layer it on the filter surface, it protects against the adhesion of fumes to the filter surface. 【Features】 ■ Equipped with remote control functionality ■ Equipped with a vibration dust removal function ■ High-pressure type ■ RoHS compliant ■ For clean use *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment
• Dust collector