ベルトカンパニー List of Products and Services

This document explains the basic knowledge regarding belt conveyors. It covers the causes of belt misalignment, methods for adjusting misalignment, and discusses common problems associated with belt misalignment in detail. <Contents> ■Frequency of regular inspections for belt conveyors ■Appropriate timing for belt replacement ■What is belt misalignment adjustment? ■Why does misalignment occur? ■Common problems related to belt misalignment and their solutions, etc. ★Currently offering the "Basic Knowledge Collection on Belt Conveyors" for free! You can view it immediately by downloading the PDF.

• Other conveying machines
• Other processing machines
• Other food machinery

This document explains the basic knowledge about belt conveyors. It addresses the causes of belt misalignment, methods for adjusting misalignment, and discusses common problems associated with belt misalignment in detail. <Contents> ■ Frequency of regular inspections for belt conveyors ■ Appropriate timing for belt replacement ■ What is belt misalignment adjustment? ■ Why does misalignment occur? ■ Common problems related to belt misalignment and their solutions, etc. ★ Currently offering a free "Belt Conveyor Basic Knowledge Collection"! You can view it immediately by downloading the PDF.

• Other conveying machines
• Other processing machines
• Other food machinery

In general, we have confirmed the effectiveness of replacing tape material in areas where Teflon tape is typically applied and heat resistance is not required. In the case of conventional Teflon tape, it is often replaced frequently, and many customers are pleased to find that the frequency of replacement has decreased. We also sell not only tape materials but also plates, custom extrusions, pipes, round bars, films, and other forms. If you have drawings, we can also sell them as machined products. *We accept orders for custom items, so please feel free to contact us.

• Adhesive tape
• plastic
• others

Belt Company specializes in the replacement, repair, and sale of conveyor belts. We offer suggestions for more user-friendly belts based on requests such as "non-slip" and "lack of grip," as well as usage methods. By alleviating unseen stress and aligning with the original requirements, we can improve work efficiency and extend the lifespan of conveyor belts. 【Handled Belts】 <Manufacturer Names> ■ Nitta Corporation ■ Habasit Japan, Ltd. ■ Forbo Siegling Japan, Ltd. ■ Bandou Chemical Co., Ltd. ■ Mitsuboshi Belting Ltd. 　* We also handle other products such as NOK timing belts and Teflon belts. * For more details, please refer to the PDF materials or feel free to contact us.

• Other conveying machines
• Calibration and repair

Are you discarding products because the surface coating has worn off and the slip has decreased? At our company, if the base material is still intact, we can remove the previous coating and reapply a new one. Furthermore, we can offer three grades of Teflon coating tailored to your usage. [Types of Coatings] (Selectable based on application and required quality) - The familiar "Silver Coating" used for frying pans - "Thick Coating," which significantly increases the film thickness from the usual (30-50 microns) to a maximum of 2000 microns (2 mm) - "Special Coating," which allows for extending the lifespan by applying Teflon after thermal spraying metals or ceramics *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other metal materials
• Heat exchanger

Parts attached to machines are often molded products, and if they are not sold individually for maintenance purposes, they can be difficult to obtain. At our company, we can sketch and machine the parts you are currently using, so we can accommodate orders starting from just one piece. Additionally, you can choose from various resin materials, which can enhance food compatibility and improve wear resistance and sliding properties, achieving two benefits in one. 【Features】 ■ Sketching and machining of the parts you are currently using ■ Orders can be accepted from one piece ■ Variety of options available ■ Can upgrade in terms of food compatibility, wear resistance, and sliding properties *For more details, please refer to the PDF document or feel free to contact us.

• Rubber
• plastic
• Other metal materials

Belt Company specializes in the replacement, repair, and sale of conveyor belts. Are you using a belt that does not match your requirements, simply because it is the only one that came with the original conveyor? We can listen to your needs, such as "non-slip" or "lack of grip," and suggest belts that are easier to use. By alleviating unseen stress and matching the belt to your actual requirements, it may lead to increased work efficiency and a longer lifespan for your conveyor. 【Available Belts】 <Manufacturer Names> ■ Nitta Corporation ■ Habasit Japan, Ltd. ■ Forbo Siegling Japan, Ltd. ■ Bandou Chemical Co., Ltd. ■ Mitsuboshi Belting Ltd. 　* We also handle other products such as NOK timing belts and Teflon belts. * For more details, please refer to the PDF materials or feel free to contact us.

• Other conveying machines
• Calibration and repair

In general, at places where Teflon tape is applied, we have confirmed the effectiveness by replacing the tape material in areas where heat resistance is not required. In the case of conventional Teflon tape, it is often replaced frequently, and many customers are pleased to find that this frequency has decreased. Additionally, we sell not only tape materials but also in the form of plates, custom extrusions, pipes, round bars, films, etc. If you have drawings, we can also sell them as machined products. We accept orders for custom items, so please feel free to contact us.

• Adhesive tape
• plastic
• others

At Belt Company, we focus on the "belt conveyor," which plays a crucial role in the production line, and we conduct sales, repairs, and replacements after selecting the type that meets our customers' specifications. 【Business Activities】 ■ On-site replacement and repair of conveyor belts (around Kyoto and Shiga) ■ Selection, sales, and line surveys of conveyor belts ■ Sales of conveyors and curved conveyors ■ Sales of processed products made of resin, rubber, and metal around conveyors <Belt conveyors also have a lifespan!> Common damages to belts include fraying at both edges due to wandering, peeling or tearing at the endless section, and dents caused by falling objects. Even with long usage, surface wear and uneven stretching cannot be avoided. In such cases, "repair" is performed for tears, peeling, and dents at the endless section. Additionally, if fraying at both edges becomes a problem but there are no issues with product transportation, both edges may be cut off. (Note: This cutting can also be done by the customer, and we recommend that you do it yourself.) We recommend replacement for surface wear and uneven stretching, as repairs cannot be made for these issues. *For more details, please download the materials or feel free to contact us.

• Other conveying machines
• Other processing machines
• Other food machinery

Do you have any of these troubles? - The conveyor belt has stopped and won't move - It takes a week to purchase a new one, which is slow... - Suddenly, it has become less responsive, etc. ☆ Belt Company addresses various belt-related concerns and challenges ☆ We specialize in the belt portion of conveyor belts, which are essential for factory production lines, and we handle replacement, repair, selection, and sales. 【Business Content】 "Diagnosis (Belt Diagnosis)" "First Aid (Repair)" "Surgery (Sales and Replacement)" "Health Improvement (Belt Selection)" "Regular Check-ups (Line Inspection and Maintenance)" *Please download the PDF to view the service overview.*

• Other conveying machines
• Other processing machines
• Other food machinery

At Belt Company, we check the actual usage conditions of our customers and carry out efficient belt conveyor replacement and repair. Common damages to belts include fraying at both edges due to wandering, peeling or tearing at the endless section, and dents caused by falling objects. Even with long usage, surface wear and uneven stretching cannot be avoided. In this context, "repair" is performed for tears, peeling, and dents at the endless section. Additionally, if fraying at both edges becomes a problem but does not affect product transport, we may cut both edges. (Note: This cutting can also be done by the customer, and we recommend that they do it themselves.) We cannot perform repairs for surface wear or uneven stretching, so we recommend replacement in those cases. ★ Belt Company addresses various belt-related concerns and challenges! ★ 【Belt Conveyor Replacement & Repair】 - We assess the actual usage conditions and select a type that fits the customer's specifications without waste. - "On-site bonding" to finish the belt for the customer's production line. - "Repair work" such as width cutting and patching. *For an overview of our services, please download the PDF and take a look.

• Other conveying machines
• Other processing machines
• Other food machinery

When I often go to construction sites, I get asked, "How long does this belt last?" Honestly, I don't know. The reason is that the lifespan depends not only on the belt itself but also on the usage environment. Even if the same belt is used on the same conveyor, the lifespan can vary due to speed, the items being transported, and the water environment (if it gets wet). Moreover, even with the same level of damage to the belt, there are environments where even a slight fraying requires replacement, while some people may judge that it's okay as long as it keeps running, even if I think it should be replaced. Therefore, regarding this lifespan, it would be difficult to provide an answer even if you bring in a representative from the manufacturer. ☆ Belt Company addresses various concerns and challenges related to belts ☆ 【Belt Conveyor Replacement & Repair】 - We assess the actual usage conditions and select the type that fits the customer's specifications without waste. - "On-site bonding" to finish the belt for the customer's production line. - "Repair work" such as width cutting and patching. *For service details, please download and view the PDF.*

• Other conveying machines
• Other processing machines
• Other food machinery

At Belt Company, we specialize in the belt portion of belt conveyors, which are essential for factory production lines, handling tasks such as replacement, repair, selection, and sales. <About Belt Conveyor Tracking Adjustment> Belt conveyors can sometimes become misaligned shortly after replacement or during seasonal changes. However, strictly speaking, they can be categorized into 'tracking' and 'misalignment,' with most cases being 'misalignment.' The method of adjustment varies depending on the phenomenon that occurs, and it also differs by each conveyor. Additionally, the actual response when touched varies, so adjustments are made after observing the tendencies through touch. ☆Belt Company addresses various concerns and challenges related to belts☆ - We confirm the actual usage conditions and select the type that fits the customer's specifications without waste. - "On-site bonding" to finish the belt for the customer's production line. - Repair work such as "width cutting" and "patching." *For more details, please download the materials or contact us.*

• Other conveying machines
• Other processing machines
• Other food machinery

At Belt Company, we perform a processing method called "on-site bonding," which finishes belts on the customer's production line. The belts that are already finished are in a loop, requiring disassembly of the conveyor. However, with on-site bonding, belt replacement can be done by loosening the tension of the belt or removing just one roller, thereby reducing the hassle of disassembly and reassembly. Additionally, if the belts in use are damaged (torn), we also carry out "repair work" such as width cutting or patching. 【Features】 - We assess the actual usage conditions and select a type that fits the customer's specifications without waste. - "On-site bonding" finishes belts on the customer's production line. - "Repair work" such as width cutting or patching. <General Delivery Time for Belts> Varies depending on type and size. For seamless types without joints, it usually takes about one month, and for overseas products, about three months. Even for standard belts, if the manufacturer's stock is depleted, similar delivery times will apply. It is recommended to understand the type of belt you are using and the lead time in advance, and to either keep stock of items with longer lead times or change the type. *Please download the PDF to view the service overview.

• Other conveying machines
• Other processing machines
• Other food machinery

Our company specializes in the maintenance of "belt conveyors" that are active on factory production lines, providing sales, repair, and replacement of belts. In fact, belts are consumables and can suddenly break. We select belts and determine replacement timing from the customer's perspective, addressing often overlooked aspects in production environments. We make proposals based on new products and successful cases in similar environments, providing belts that match our customers' production lines. Please feel free to contact us regarding belts. 【Business Activities】 ■ On-site replacement and repair of conveyor belts ■ Selection, sales, and line investigation of conveyor belts ■ Sales of conveyors and curved conveyors ■ Sales of processed products made of resin, rubber, and metal related to conveyors *For more details, please contact us or download our catalog.

• Processing Contract

The WEU series uses antimicrobial and mold-resistant urethane on the surface, and is designed to prevent large fraying from occurring near the ears during operation. It also has treatments that make the belt resistant to shrinking due to oils and other substances, meeting the requirements for the transportation of various food products. If you are struggling with foreign matter contamination measures in food transportation lines, please consider this product.

• Other food machinery
• belt

Generally, we confirm the effectiveness of replacing tape material in areas where Teflon tape is typically applied and where heat resistance is not required. In many cases with conventional Teflon tape, it is frequently replaced, and customers often express their satisfaction with the reduced frequency of replacement. Additionally, we sell not only tape material but also in forms such as plates, custom extrusions, pipes, round bars, and films. If you have drawings, we can also provide products as machined parts. We accept orders for custom items, so please feel free to contact us.

• Adhesive tape
• plastic
• others

Parts attached to machines are often molded products, and if they are not sold individually for maintenance, they can be difficult to obtain. At our company, we can sketch and machine the parts you are currently using, so we can accommodate orders starting from just one piece. Additionally, you can choose resin materials, which can enhance food compatibility and improve wear resistance and sliding properties, providing a twofold benefit. 【Features】 ■ Sketch and machine the parts you are currently using ■ Orders can be placed starting from one piece ■ Resin materials are also available ■ Can enhance food compatibility and improve wear resistance and sliding properties *For more details, please refer to the PDF document or feel free to contact us.

• Rubber
• plastic
• Other metal materials

- Excellent processability creates free shapes. - Molding similar to general rubber is possible. - Strong adhesion with metals is possible. - Cutting and punching of sheet materials are also acceptable. - There are sponge sheets designed for weight reduction! Independent foamed vibration-damping sponge with a specific gravity of 0.3. - The flame-retardant type meets UL standard 94HB.

• others
• Rubber

For light load transport: widths of 100, 150, and 200 × lengths of 1000 to 3000 For medium load transport: widths of 200, 300, 400, and 500 × lengths of 1000 to 6000 If within the above sizes, I believe we can offer a lower price than the current conveyor purchase price. Additionally, we will also select a belt that meets the specifications.

• Other conveying machines
• Other processing machines
• Other food machinery

<Protecting electronic components from oil mist> ◎ Installation can be done easily with a one-touch magnetic attachment without the use of tools. ◎ The perforations allow for easy detachment of dirty filters. ◎ The holder is made from recycled PET bottle material.

• Other FA equipment
• Chemicals
• fiber

We not only sell belts but also provide selection and proposals, and if you are nearby, we can perform on-site replacements. Additionally, we handle not only belts but also conveyors, rollers, metal processing, resin processing, and special rubber, so please feel free to contact us.

• belt
• others

Are you discarding products because the surface coating in frequently used areas has worn off and the slip has decreased? At our company, if the base material is intact, we can remove the previous coating and reapply a new one. Additionally, we can adjust the grade of the Teflon coating, which comes in several types, according to your usage. 【Features】 ■ Remove the previous coating and reapply a new one ■ Grade adjustment possible according to customer usage *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other metal materials
• Heat exchanger