シブタニ List of Products and Services

We would like to introduce our "one-touch products." These emergency release flat handles, such as the "EL-16/EL-17," can be installed easily with a one-touch mechanism without using screws, while keeping the stop pin attached. They are designed to be flat when stored, making them unobtrusive, and we offer a wide range including the rotating handle "EDU-210." All products are easy to install and comply with RoHS10. 【Product Lineup】 ■ Emergency release flat handle "EL-16 (with key) / EL-17 (without key)" ■ Rotating handle "EDU-210" ■ Recessed pull handle "ETP-133" ■ Dual pull resin handle "ETP-141" ■ One-touch panel fastener "EL-908A" ■ Magnetic catch "EMC-311 (S) to 315 (S)" ■ Magnetic catch receiver "EMC-316/317" (EMC-316 is for EMC-311, and EMC-317 is for EMC-312.) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• others

The "EMC-311(S) to 315(S)" are embedded magnetic catches. Starting with the "EMC-311," which has an adhesion force of approximately 11.8N (1.2kgf), there is a wide lineup including "EMC-311S," "EMC-312," "EMC-312S," and "EMC-313," among others. Additionally, we also offer the magnetic catch receiver "EMC-316/317," finished in glossy chromate. 【Specifications】 ■ Material - Magnet EMC-311, 312: Ferrite (isotropic) EMC-311S, 312S, 313(S) to 315(S): Ferrite (anisotropic) - Case: Nylon (PA) ■ Finish: Raw (White, Gray) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• others

The "EL-16/EL-17" is a one-touch emergency release flat handle. It can be installed with one touch without using screws while keeping the stop pin attached. By hooking the top of the main body into the installation hole and pushing the main body in, it is secured by the lower spring and the upper recess. Additionally, there are left and right versions: "EL-16" comes with a key, while "EL-17" does not. 【Features】 ■ The emergency release lever can be pressed down to unlock from the inside. ■ It can be installed with one touch without using screws while keeping the stop pin attached. ■ It is possible to hide the screw hole cutout for EL-4/5. ■ There are left and right versions. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• others

【Product Features】 There are handholds in both directions. It can be installed with one touch. 【Features】 ■Material: ABS resin ■Finish: Fabric (black) ■Compatible board thickness: t = 1.6 to 2.3 mm ■Performance: Strength performance 100N ■RoHS directive compliant product for 10 substances *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "DEH-CL142" is a stainless steel leaf hinge that excels in corrosion resistance. The left and right configurations can be easily changed using U-nuts or cotter pins, which also prevent pin disengagement. It is ideal for medium to large doors. 【Features】 ■ Material: Stainless steel (SUS304) ■ Finish: Buff polished ■ Performance: Maximum static load ⇒ Vertical load 2170N Horizontal load 3000N *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "DEH-CL225" is a server hinge that allows the door to be removed by inserting and removing the shaft. It prevents the shaft from falling out due to the built-in spring. It has a left and right orientation. 【Features】 ■ Material: Steel (equivalent to SS400) ■ Finish: Glossy chromate *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "DEH-CL195-3" is a concealed hinge that fits inside the door, making it hidden from view. It features a click mechanism, and the positioning angle is 90°. 【Features】 ■ Material: Zinc die-cast (ZDC) ■ Finish: Powder-coated (Black) ■ Performance: Maximum static load: ⇒ Radial load 800N Axial load 425N *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "DEH-CL132" is an aluminum concealed hinge that can be inserted and removed, fitting inside the door and remaining hidden from view. 【Features】 ■ Material: Aluminum extruded material ■ Finish: Powder-coated (Silver) ■ Performance: Maximum static load: ⇒ Radial load 800N Axial load 425N *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "DEH-61S" is a stepped hinge made of stainless steel, featuring excellent corrosion resistance. It is suitable for enclosures with steps and is a universal type for both left and right sides. 【Features】 ■ Material: Stainless Steel (SUS304) ■ Finish: Buff polished *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "EFH-120" is an easy-to-use plug-in type hinge. It achieves smooth and seamless operation with washers. It is finished with an antibacterial powder coating. It can be used in refrigeration and freezing units, clean booths, and more. 【Features】 ■ Material - Blade: Zinc die-cast (ZDC) - Shaft: Stainless steel (SUS304) - Washer: Polyacetal resin (POM) ■ Finish - Blade: Powder-coated (antibacterial specification in stainless color and black) - Shaft: Raw - Washer: Raw (white) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "EFH-A101-1/EFH-101-1" is a corner hinge with an antibacterial specification that prevents the growth of bacteria and other germs. When opened within 120°, the door closes by its own weight, and when opened beyond 120°, it can hold the angle. A self-closing type is also available. Additionally, the left and right orientation can be changed by replacing the resin parts. 【Features】 ■ Material - Main body: Aluminum die-cast (ADC) - Screw cover: ASA resin (antibacterial specification) ■ Finish - Main body: Powder-coated (antibacterial specification) - Screw cover: Raw (textured finish) ■ Performance: Passed durability test of 300,000 cycles *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "EFH-110S" is a corner hinge with excellent corrosion resistance. It is made of stainless steel, making it suitable for air conditioning, clean rooms, and machinery. It has passed a durability test of 500,000 cycles. 【Features】 ■ Material: Stainless Steel (SUS304) ■ Finish: Buff polished ■ Performance: Passed durability test of 500,000 cycles *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "EFH-100/EFH-100S" is a corner hinge that can be used on both the left and right sides. It comes with a long hole spacer that allows for fine adjustment of the mounting position. The structure, featuring a resin cam, minimizes the generation of metal dust and noise during operation. Additionally, the snap-on decorative cover conceals the mounting screws. 【Features】 ■ Material - Body: EFH-100 Zinc die-cast (ZDC) : EFH-100S Stainless steel (SUS304) - Cover: Stainless steel (SUS304) ■ Finish - Body: EFH-100 Chrome plating : EFH-100S Buff polished - Cover: Buff polished *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

Introducing the spring-loaded hinge 'DEH-40/DEH-40S'. The "DEH-40" is made of steel, while the "DEH-40S" is made of stainless steel. Both models have a spring inside the core rod, making them suitable for use in machinery and other applications. 【Features】 ■Material ・DEH-40: Steel (SPCC) ・DEH-40S: Stainless Steel (SUS304) ■Finish ・DEH-40: Glossy Chromate ・DEH-40S: Glossy Barrel Polished ■Performance Durability ・20,000 cycles (within a torque variation rate of 25%) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "DEH-T21S" is a torque hinge that can be used both horizontally and vertically. There are two torque values available: 0.8N·m and 1.5N·m. All mechanical components, including washers, are made of stainless steel, providing excellent corrosion resistance. We also offer a version with a protective cover for use in high-humidity environments. 【Features】 ■ Material - Stainless Steel (SUS304) ■ Finish - Glossy barrel ■ Performance Durability - 20,000 cycles (with torque variation rate within 25%) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "DEH-T20S" is a torque hinge made entirely of stainless steel, including components like washers, and is excellent in corrosion resistance. In addition to horizontal use, it can also be used vertically. You can choose from three torque values: 0.3N·m, 0.8N·m, and 1.5N·m. We also offer models with a protective cover: "DEH-T20S-1C/2C/3C." 【Features】 ■ Material - Stainless steel (SUS304) ■ Finish - Glossy barrel ■ Performance durability - 20,000 cycles (with a torque variation rate within 25%) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

"SKY" is a quiet design caster. It features ball bearings inside the wheels, providing excellent noise reduction. We offer both stopper and non-stopper types, suitable for use with office equipment, medical devices, and scientific instruments. You can choose from plate type or screw type. If you need a triangular plate type, please feel free to contact us.

• Other consumables
• caster

"KELLY" is a quiet design caster that uses nylon and polyurethane for its wheels. Available in both stopper and non-stopper types. The stopper type features a double stopper, making it suitable for use with medical equipment and more. 【Features】 ■ Material - Body: Nylon (PA) - Wheel: Nylon (PA), Polyurethane (PU) ■ Finish - Body: Fabric - Wheel: Fabric *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• caster

"FERRARI" is a design caster available in types with and without a stopper. The body and wheels are made of nylon (PA). It can be used for office equipment, machinery, and more. 【Features】 ■Material ・Body: Nylon (PA) ・Wheels: Nylon (PA) ■Finish ・Body: Fabric ・Wheels: Fabric *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• caster

"ERICA2" is a design caster that can be used for office equipment and machinery. It features a silent design with wheels made of nylon and elastomer. We offer both types with and without stoppers. 【Features】 ■Material ・Body: Nylon (PA) ・Wheels: Nylon (PA), Elastomer (TPE) ■Finish ・Body: Fabric ・Wheels: Fabric *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• caster

"EMMA2" is a design caster that comes in a lineup with a stopper and a non-stopper type. We also offer a silent version with bearings. Please use it for office equipment, machinery, and other applications. 【Features】 ■ Material - Body: Steel (ST12) - Wheel: Polycarbonate (PC), Polyurethane (PU) ■ Finish - Body: Chrome plating - Wheel: Fabric *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• caster

"KOO" is a design caster suitable for use in office equipment and machinery. Available in types with and without a stopper. The main body material is zinc die-cast, and the wheels are made of ABS resin and polyurethane. 【Features】 ■Materials ・Main body: Zinc die-cast (ZDC) ・Wheels: ABS resin, polyurethane (PU) ■Finish ・Main body: Chrome plating ・Wheels: Fabric *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• caster

"EMMA" is a design caster that can be used for applications such as medical equipment. We offer plate types and bolt types with wheel diameters of 50 and 75. Other sizes are also available. 【Features】 ■ Material - Body: Steel (ST12) - Wheel: Polycarbonate (PC) + Polyurethane (PU) ■ Finish - Body: Chrome plating - Wheel: Raw *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• caster

"LAIA" is a quiet design caster. There is a wide range of products available, including plate-type and screw-type options. You can also choose between types with and without stoppers. It is suitable for use in medical devices and other applications. 【Features】 ■ Material - Body: Nylon (PA) - Wheel: Nylon (PA) + Polyurethane (PU) ■ Finish - Body: Fabric - Wheel: Fabric *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• caster

1. 【Solenoid】 Equipped with a solenoid, it can be locked and unlocked electrically. "Knob-type Electronic Cam Lock EEL-3" (under development) - The emergency unlocking cylinder does not disengage when unlocking due to a single point disengagement. - You can choose from three types of cylinders. - The LED pilot lamp allows you to easily see the locking and unlocking status. What is a 【Solenoid】? It is a mechanical component that converts electrical energy into mechanical linear motion. 2. 【Actuator】 By combining with various locks, it can be locked and unlocked electrically. "Actuator EAC-1" What is an 【Actuator】? It is a drive device that converts energy such as electricity or pneumatic pressure into mechanical movement to accurately operate equipment. - By combining with EL-619, an electric locking system can be constructed. - Available for 12V and 24V. The direction of operation can be reversed depending on polarity. - It has a built-in thermal loss prevention positioner. - It has waterproof performance. - With the fail-safe function, even if the internal gear fails, the arm can still move and operate the linked lock. * We will design and develop locks that can be combined with this product according to your requirements.

• Electron tube

"BOLA" is a design caster that uses nylon and polyurethane for the wheel material. Available in options with or without a stopper. Due to its silent design, it can be used for office equipment, medical devices, and more. 【Features】 ■Material ・Body: Nylon (PA) ・Wheel: Nylon (PA), Polyurethane (PU) ■Finish ・Body: Fabric ・Wheel: Fabric *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• caster

"FROG" is a silent design caster. The "FROG-65US" also comes with a smart brake mechanism that allows you to change the movement of the caster. It can be used for office equipment, machinery, and more. 【Features】 ■Material ・Body: Nylon (PA) ・Wheels: Nylon (PA), Polyurethane (PU) *Wheel diameter φ38 is only nylon ■Finish ・Body: Fabric ・Wheels: Fabric *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• caster

"OLYM" is a design caster available in both plate and screw-in types. It uses urethane wheels that are resistant to scratches on the floor, making it suitable for use with office equipment and machinery. We offer both types with and without stoppers. 【Features】 ■ Material - Body: Zinc die-cast (ZDC) - Wheel: Nylon (PA), Polyurethane (PU) ■ Finish - Body: Chrome plating - Wheel: Fabric *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• caster

"KOO EVO" is a quiet design caster. It uses polyurethane wheels that are less likely to scratch the floor. We offer both models with and without a stopper. Please use it for office equipment, machinery, etc. 【Features】 ■Material ・Body: Zinc die-cast (ZDC) ・Wheels: Nylon (PA), Polyurethane (PU) ■Finish ・Body: Chrome plating ・Wheels: Fabric *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• caster

The "EB-NJB" is an adhesive edge cover made from flame-retardant material (equivalent to flame retardant standard UL94V-0). It can be directly attached to metal sheets and other surfaces due to the adhesive material on the inside. There is no waste like with double-sided tape. 【Features】 ■Material - Outside: Acrylic elastomer - Inside: Adhesive elastomer ■Finish - Outside: Fabric (Black) - Inside: Fabric *For more details, please refer to the PDF document or feel free to contact us.

• Rubber
• Other consumables
• others

1. 【RFID】Eliminating the inconvenience of moving with large luggage! "Baggageport" - Temporary storage device for large luggage - - You can easily store your luggage temporarily using your transportation IC card. - Hang your luggage on the wire of the device installed on the wall for storage. - There are both paid and free options available. What is 【RFID】? It refers to the technology that uses radio waves (electromagnetic waves) to read and write data from RF tags non-contactly. 2. 【Energy Harvest】Wireless communication strike that requires no batteries or wiring "SWITCH STRIKE AIR" - This is a wireless communication strike that can send locking and unlocking signals powered by electricity generated from the sliding operation of the latch, without the need for batteries or wiring. - You can check the congestion status using display boards for occupancy. Furthermore, by linking with a network, system operations such as viewing from PCs and smartphones and data accumulation are also possible. What is 【Energy Harvest】? It is a technology that harvests energy from the surrounding environment (such as light, vibration, heat, etc.) and converts it into electrical power.

• Flow Control

The foot bolt "EA13" with a bolt protection cover is available at a low cost and an easily accessible price. It can be used in conjunction with the EA52. Products with a size of M12 or larger have a H-shaped cross hole No.3 processed on the bottom surface of the bolt. Please consult us if you require a non-slip type. 【Features】 ■Material - Shaft: Steel (SWRM) - Bottom: Steel (SPCC) ■Finish - Glossy Chromate The "EA52" is a foot bolt auxiliary fitting. ■Material - Steel (SPCC) ■Finish - Glossy Chromate *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

The foot bolt 'EA13S' with a bolt protection cover is available at a low cost and an easily accessible price. The back of the bolt has a cross hole, making installation work easy. (Excluding M8 and M10 types) 【Features】 ■ Material - Stainless steel (SUS304) ■ Finish - Barrel polishing 'EA52S' is an auxiliary fitting for the foot bolt. ■ Material - Stainless steel (SUS304) ■ Finish - Barrel polishing *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

The foot bolt "EA18" with a bolt protection cover is a fixed plate type used for various purposes. The foot part can be secured with anchor bolts, and the back of the bolt has a cross hole, making installation easy. 【Features】 ■Material ・Steel (SPCC) ■Finish ・Glossy chromate *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

The foot bolt "EA18S" with a bolt protection cover is a fixed plate type used for multiple purposes. The foot part can be secured with an anchor bolt, and the back of the bolt has a cross hole, making installation easy. 【Features】 ■ Material ・ Stainless steel (SUS304) ■ Finish ・ Barrel polished *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

The 'EA17' with a bolt protection cover is a heavy-duty type foot bolt that features a robust base. The back of the bolt has a cross hole, allowing for easy installation. Additionally, the 'EA52' is a foot bolt auxiliary bracket that can be used with 'EA13(S)' and 'EA17(S)'. 【Features】 ■ Material <EA17> - Shaft: Steel (SWCH) - Base: Steel (SS400) <EA52> - Steel (SPCC) ■ Finish <EA17><EA52> - Glossy Chromate *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

The "EA17S" is a heavy-duty type foot bolt that features a robust base. The back of the bolt has a cross hole, allowing for easy installation. It can be used for building equipment, machinery, and more. The "EA52S" is a foot bolt auxiliary fitting. It can be used with "EA13(S)" and "EA17(S)." 【Features】 ■Material <EA17S><EA52S> - Stainless Steel (SUS304) ■Finish <EA17S> - Glossy barrel polishing <EA52S> - Barrel polishing *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

The "EA24" is a heavy-duty type bolt that features a robust base. Thanks to the friction of the rubber, the device is securely fixed. The 8° swivel allows for maintaining the level of machine tools even when the ground surface is not completely horizontal. It complies with the RoHS directive regarding six substances. 【Features】 ■ Material - Bolt: Steel (SS400) - Hex Nut: Steel (SWCH) - Base: Steel (SS400) + Rubber (Silicone) ■ Finish - Bolt: Colored Chromate (Trivalent) - Hex Nut: Colored Chromate (Trivalent) - Base: Colored Chromate (Trivalent) + Raw *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

Introducing the foot bolt "EA19" with a bolt protection cover. This product uses non-migratory rubber (EPDM) at the bottom. It can be used for building equipment, machinery, and more. 【Features】 ■Material - Shaft: Steel (SWCH) - Bottom: Ethylene Propylene Rubber (EPDM) ■Finish - EA19-「」: Electrodeposited coating (Black) - EA19-「」BKC: Black Chromate *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

Introducing the Foot Bolt "EA19S." This product uses non-migratory rubber (EP) at the bottom. The materials are as follows: Shaft: Stainless Steel (SUS304), Bottom: Ethylene Propylene Rubber (EPDM). 【Features】 ■ Materials - Shaft: Stainless Steel (SUS304) - Bottom: Ethylene Propylene Rubber (EPDM) ■ Finish - Electrolytic Polishing *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

Introducing the Foot Bolt "EA11". This product is a low-cost type and comes with a bolt protection cover. It can be used for vending machines, trash cans, and more. 【Features】 ■ Material: Steel (SWCH) ■ Finish ・ EA11-「」: Colored Chromate ・ EA11-「」BKC: Black Chromate *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

Introducing the flexible leveler "SFL-FA/FB." This product features a spherical seat and can tilt up to 15° at the threaded part. It has a lightweight structure that can withstand heavy loads, making it suitable for use on sloped surfaces. Additionally, the base has a cross hole on the underside for easy assembly. 【Features】 ■ Material: Steel (SPCC) ■ Finish: Glossy Chromate *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

The "SP Series" is a foot bolt that offers 2 to 4 times the vibration-damping effect compared to conventional vibration-damping rubber. It comes standard with an anti-vibration mat to reduce shaking. It has significantly higher shock absorption compared to other components and exhibits exceptional strength against bending and tearing. It also has excellent oil resistance and can be used semi-permanently. 【Features】 ■ Material: Stainless Steel (SUS304) ■ Finish: Glossy barrel polishing *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

"S-HAS/HBS/HCS" is a seismic-type foot bolt nut. This product can be used as a foot bolt by incorporating commercially available bolts. It comes standard with a shock mat to reduce shaking. 【Features】 ■Material: Stainless Steel (SUS304) ■Finish: Glossy barrel polishing *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements

Introducing the Foot Bolt Nut "S-NM/NA/NB/NC." This product can incorporate commercially available bolts and be used as a foot bolt. It can be utilized in machinery and other applications. 【Features】 ■ Material - S-NM-RW, NA-RW, NB-RW, NC-RW: Steel (SPCC) - S-NA-S, NB-S, NC-S: Stainless Steel (SUS304) ■ Finish - S-NM-RW, NA-RW, NB-RW, NC-RW: Glossy Chromate - S-NA-S, NB-S, NC-S: Glossy Barrel Polished *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut
• Other machine elements