IKK List of Products and Services

The DFC-2536BLH is a 36V cordless flush cutter. It can efficiently cut and remove flush-mounted rebar and anchor bolts. When cutting fully threaded bolts, there is no need for deburring, and nuts can be inserted. Please feel free to contact us if you have any requests. 【Features】 ■ Cuts quickly and cleanly with minimal sparks ■ 3WAY handle that can be attached and detached from three directions ■ Freely adjustable setup according to the scene ■ Fully charged in about 25 minutes ■ 80% practical charge completed in 19 minutes *For more details, please download the PDF or contact us.

• cutter
• Other cutting tools
• Power tools

The "DCC-1636HR" is a cordless rebar cutter that can cut hard rebar with a diameter of 16mm or less, featuring a head that rotates 360 degrees. With a single charge, it can cut approximately 380 pieces of D13 rebar and about 250 pieces of D16 rebar. The slim head, which eliminates the airbag, rotates 360 degrees, making it effective in narrow spaces. 【Features】 ■ Equipped with a brushless motor ■ Comes with 2 batteries (DC36V) ■ High durability, long lifespan, and maintenance-free ■ The release valve mechanism allows for hydraulic release even when rebar is jammed ■ The installation of a debris guard reduces accidents caused by cutting fragments of rebar *For more details, please download the PDF or contact us.

• cutter
• Other cutting tools
• Power tools

The "DCC-2036BLH" is a cordless rebar cutter equipped with a release valve mechanism that allows for hydraulic release even when rebar is jammed. With one charge, it can cut approximately 210 pieces of D16 rebar and about 160 pieces of D19 rebar. It can rotate 360 degrees, allowing for use according to the situation. 【Features】 ■ Cutting speed: approximately 4 seconds ■ Equipped with a DC36V brushless motor ■ Installation of a debris guard reduces accidents caused by flying rebar pieces ■ 80% practical charge completed in 19 minutes ■ Full charge in about 25 minutes *For more details, please download the PDF or contact us.

• cutter
• Other cutting tools
• Power tools

The "DFC-2018BLH" is a flush cutter that can efficiently cut and remove rebar and anchor bolts at flush level. When cutting fully threaded bolts, there is no need for deburring, and nuts can be inserted easily. It cuts cleanly and quickly with minimal sparks. 【Features】 ■ Cordless flush cutter ■ Efficiently cuts and removes rebar and anchor bolts at flush level ■ Equipped with a large-capacity lithium-ion battery for easy operation in various work environments ■ 3WAY handle that can be attached and detached from three directions ■ Freely adjustable setup according to the scene *For more details, please download the PDF or contact us.

• cutter
• Other cutting tools
• Power tools

The "DTB-165" is a digital bender that achieves remarkable quietness by adopting a high-output motor. It features a touch panel for angle settings, allowing for easy operation. Five angles can be registered and switched with just a touch. Please feel free to contact us if you have any inquiries. 【Features】 ■ LCD screen and touch panel for switching angle settings and bending speed ■ Five angles can be registered through computer control ■ Bending angles can be set in increments of 0.5 degrees ■ Remarkable quietness achieved by adopting a high-output motor ■ Capable of bending processes from 15 to 32R, accommodating complex processing as well *For more details, please download the PDF or contact us.

• Other processing machines

The "DTB-195" is a quiet bending machine that uses a touch panel system with an LCD screen for angle settings and bending speed adjustments. It is possible to set and register five angles. Bending operations can be performed by recalling the registered angles as needed. 【Features】 ■ Achieves quiet operation, high rigidity, and high precision ■ Allows registration of five angles through computer control ■ Bending angles can be set in increments of 0.5 degrees ■ Capable of simultaneous bending of the same size from D10/4 pieces to D19/1 piece ■ No idling noise or gear noise *For more details, please download the PDF or contact us.

• Other processing machines

The "DFC-25D" is a flush cutter that is highly durable, long-lasting, and maintenance-free. It can efficiently cut flush the reinforcing bars and anchor bolts, allowing for their effective removal. It is suitable for use in narrow spaces and for edge cutting. Please feel free to contact us if you have any requests. 【Features】 ■ Affordable price for replacement blades (circular saw blades) ■ Equipped with a brushless motor ■ High durability, long lifespan, maintenance-free ■ Capable of cutting all-thread bolts up to M25 ■ Compact and lightweight, suitable for various locations *For more details, please download the PDF or contact us.

• cutter
• Other cutting tools
• Power tools

The "OKC Series" is a stationary rebar cutting machine that uses special steel for its main components, achieving excellent wear resistance. All rotating parts are protected by covers, ensuring high safety. We offer various models, including types that can be set up in compact and narrow spaces, and types that facilitate easy lubrication with a manual pump, reducing maintenance effort. 【Features】 ■ OKC-32/42: Contributes to labor-saving at a low cost ■ OKC-48: A type that emphasizes the number of simultaneous cuts with a wide blade ■ OKC-52N: A type with a wide blade of 200mm, allowing for many simultaneous cuts ■ OKC-55: A high-power type with a maximum cutting capacity of SD345 and D51 ■ OKC-60: The highest power type in the series, equipped with a blade width of 230mm *For more details, please download the PDF or contact us.

• Other cutting tools
• Power tools

The "DBC-16H" is a rebar bender cutter that supports SD390 rebar with a maximum bending angle of 180 degrees. Equipped with a high-power motor, it can handle both "cutting" and "bending" operations for SD390 rebar. The angle scale allows for quick estimation of the bending angle. Additionally, it can bend continuously up to 180 degrees, enabling fine adjustments. 【Features】 ■ Capable of "cutting" and "bending" rebar up to SD390 and D16 ■ Bending angle can be adjusted continuously up to a maximum of 180 degrees ■ Equipped with a high-power motor, suitable for high-strength rebar from overseas ■ Can also bend stirrups *For more details, please download the PDF or contact us.

• cutter
• Other cutting tools
• Power tools

The "IKK PRODUCT GUIDE Comprehensive Catalog" is a comprehensive catalog featuring the reliable and trusted brand DIAMOND products. The product concept includes "cutting," "drilling," "bending," and "connecting." We introduce various products from the DIAMOND brand, including the "Puncher," which has been built over half a century, as well as "Core Drills" and "Dispensers." [Contents (partial)] ■ Tile Core Drill ■ Diamond Core Drill ■ Hydraulic Puncher *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• drill
• dispenser

The "LS-055 to 095" is a loading system that can turn your existing stationary cutting machine into an automatic cutting machine simply by connecting it. Both "feeding" and "dropping" can be customized in 50cm increments. By using this product, the feeding, stopping, dropping, and sorting of rebar can be done more easily. 【Features】 ■ One person can do the work of three ■ Easy operation makes cutting tasks simple ■ An automatic cutting machine can be created at a low cost ■ Exceptional reliability and durability ■ Usable outdoors *For more details, please refer to the PDF materials or feel free to contact us.

• Plastic processing machines (cutting and rolling)
• Other conveying machines
• Contract manufacturing

The "CD-120H" is an ultra-lightweight, handheld core drill. It is equipped with an overload prevention mechanism (clutch). The motor features a reliable double insulation structure. The water supply valve is rotary. Standard accessories include a handle, center drill, tool set, and pickup wire. 【Features】 ■ Compact size of 4.3 kg ■ Wet type ■ Equipped with an overload prevention mechanism (clutch) ■ Motor has a reliable double insulation structure ■ Rotary water supply valve *For more details, please refer to the PDF document or feel free to contact us.

• Power tools
• drill
• Other cutting tools

The "HCD-16W Knife (KATANA)" is a hydraulic cutter compatible with SD390. It achieves low cost and high power, with a cutting time of just 2 seconds. It can cut rebar up to D16 of SD390 with the standard blade. Additionally, the adjustable stopper (rebar diameter adjustment bolt) is a simple spring-loaded type that can be adjusted without tools. Furthermore, by using the optional PC steel cutter block "1C1610P," it can accommodate SD490 rebar. 【Features】 ■ Low cost and high power ■ Cutting time of just 2 seconds ■ Can cut SD390 rebar up to D16 with the standard blade ■ Adjustable without tools ■ Can accommodate SD490 rebar with optional parts *For more details, please refer to the PDF document or feel free to contact us.

• Power tools
• cutter
• Other cutting tools

The "DFC-25BLH" is a versatile cutter that can perform well in various scenes. It provides a new working environment for cutting flush in difficult, narrow, and tight spaces, as well as for various materials. It produces minimal sparks and offers a clean and quick finish. There is no need for deburring on all-thread and bolts, allowing nuts to fit easily. Additionally, it is equipped with a brushless motor, achieving high durability, long lifespan, and maintenance-free operation. 【Features】 ■ For the removal of anchor bolts and cutting rebar ■ Equipped with a brushless motor ■ High durability, long lifespan, maintenance-free ■ Minimal sparks with a clean and quick finish ■ No deburring needed for all-thread and bolts, allowing nuts to fit *For more details, please refer to the PDF document or feel free to contact us.

• Power tools
• cutter
• Other cutting tools

The DWH-1619HP is a double hacker that comes with a dedicated case for convenient portability. The head angle can be adjusted up to 180 degrees. Additionally, it can be extended and retracted with a push button. Our company manufactures and sells various tools, primarily hydraulic products, under the brand name DIAMOND, with the product concepts of "cutting," "drilling," and "bending." For the manufacturing and sales of various tools, please leave it to us. *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "D3L-50T" is a three-line cutter that allows for flexible use with 1 to 3 blades. It is equipped with a double-insulated motor, is lightweight, and allows for easy depth adjustment. Additionally, this product is highly durable, long-lasting, and maintenance-free. It can be used flexibly depending on the application and is capable of digging grooves in concrete. 【Features】 ■ Three-blade specification ■ Lightweight ■ Double insulation ■ Easy depth adjustment ■ Flexible usage depending on the application *For more details, please refer to the PDF materials or feel free to contact us.

• Power tools
• cutter
• Other cutting tools

The "DCC-1636BLH" is a high-durability, long-life, maintenance-free cordless rebar cutter. It achieves a maximum cutting capacity of approximately 380 pieces of D13 rebar and approximately 250 pieces of D16 rebar on a single charge. With the inclusion of a release valve mechanism, hydraulic release is possible even when rebar is jammed. Additionally, the installation of a debris guard reduces accidents caused by flying rebar cutting pieces. 【Features】 ■ A slim head without an airbag that rotates 360 degrees ■ Effective in narrow spaces ■ Hydraulic release is possible even when rebar is jammed due to the release valve mechanism ■ The installation of a debris guard reduces accidents caused by flying rebar cutting pieces ■ Suitable for those who want to cut from 4 to 16mm *For more details, please refer to the PDF document or feel free to contact us.

• Power tools
• cutter
• Other cutting tools

The "DCC-1336BLH" is a cordless rebar cutter capable of cutting rebar up to SD345 and D13 with a standard blade. It is equipped with a brushless motor, offering high durability, long life, and maintenance-free operation. The head and motor can rotate 360 degrees. With a single charge, it can cut approximately 685 pieces of D10 rebar and about 455 pieces of D13 rebar. 【Features】 ■ Equipped with a brushless motor ■ High durability, long life, and maintenance-free ■ Maximum cutting capacity per charge: approximately 685 pieces of D10 rebar and about 455 pieces of D13 rebar ■ Capable of cutting rebar up to SD345 and D13 with a standard blade ■ Ideal for those who want to cut rebar from 4 to 13mm *For more details, please refer to the PDF document or feel free to contact us.

• Power tools
• cutter
• Other cutting tools

The "EPC-1538BLH" is a cordless puncher capable of processing stainless steel plates. While the previous model had a maximum hole punching capacity of about 300 times per charge, this new model has achieved approximately 500 times. The head can rotate 360 degrees, making it effective even in hard-to-reach areas. It also features a release valve mechanism that allows for hydraulic release. 【Features】 ■ Equipped with a lithium-ion 36V battery ■ Effective in hard-to-reach areas ■ Includes a release valve mechanism for hydraulic release ■ Lightweight at 6.8 kg ■ Capable of processing stainless steel plates *For more details, please refer to the PDF document or feel free to contact us.

• Power tools
• Other work tools
• Other cutting tools

The "Electrical Installation/Construction Related Comprehensive Catalog" is a catalog from IKK Corporation, which manufactures and sells construction machinery and hydraulic tools. It features products such as the cordless puncher "EPC-1518HL" with a 360-degree rotating head, and the compact and lightweight cordless riveter "DRG-4800C" with long-lasting battery life. The catalog includes many electrical installation and construction-related products that leverage years of hydraulic technology to achieve stability and high durability. [Contents] ■ Cordless Punchers ■ Electric Hydraulic Punchers ■ Cordless Riveters ■ Cordless Dispensers *For more details, please refer to the PDF document or feel free to contact us.

• dispenser
• Hydraulic Equipment

The "Reinforcement Processing Machine/Reinforcement Related Products Comprehensive Catalog" is a catalog from IKK Corporation, which manufactures and sells construction machinery and hydraulic tools. It features a lineup of products such as the "200V Stationary Reinforcement Cutting Machine," which is compact, lightweight, and easy to operate, making it simple to move and install, and the "200V Stationary Reinforcement Bending Machine," which allows for one-touch adjustment of bending angles. The catalog includes a variety of large, highly functional reinforcement processing machines and related products. [Contents] ■ Stationary Reinforcement Cutting Machine ■ Stationary Reinforcement Bending Machine ■ Stationary Reinforcement Ring Bender ■ Digital Bender ■ Loading System *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)
• Other processing machines

The comprehensive catalog "Rebar Cutter / Rebar Bender" is published by IKK Corporation, which manufactures and sells construction machinery and hydraulic tools. It features a lineup including the cordless "Flush Cutter," suitable for difficult and narrow areas, and the lightweight "Rebar Bender," which can be easily carried to the job site. The catalog includes rebar cutters that pursue durability, functionality, and ease of use on-site, as well as compact and lightweight rebar benders. [Contents (excerpt)] ■ Flush Cutter ■ Saw Blade Cutter ■ Cordless Cutter ■ Portable Bender ■ Hand Bender *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Other work tools
• Other processing machines

The rebar bender cutter is a dual-purpose machine that combines the functions of a "rebar cutter" and a "rebar bender." It has been developed with a focus on being compact and lightweight for use on-site, achieving the best matching of both functions. The ease of use as a two-in-one machine has received positive feedback. 【Features】 [Rebar Bender Cutter] ○ The stationary rebar bender offers excellent stability ○ Simultaneous bending of three or four bars is possible [Manual Bender Cutter] ○ Can be operated manually on sites without power supply ○ Allows for manual cutting and bending processing For more details, please contact us or download the catalog.

• Other work tools
• cutter

The rebar bender "Strainer" can handle everything from pushing, pulling, and straightening to bending anchors. It is compatible with D32 rebar. Designed with portability and lightweight in mind for on-site use, this rebar bender prioritizes convenience beyond just the performance of the machine itself. We also offer options such as a foot switch and stand set for easy operation while standing, as well as small R rollers for bending with a small radius. 【Features】 ○ Can correct rebar up to D32 in a stepless manner by "pushing" or "pulling" ○ The housing can rotate 360 degrees → Effective even in narrow spaces or the inner parts of column reinforcement ○ A powerful version for "straightening" tasks to correct rebar bends caused by concrete pouring or misalignment of column center markings For more details, please contact us or download the catalog.

• Other work tools

Rebar Bender "Hand Bender" is a handy type, making it easy to perform bending operations on-site. We have aimed for a compact and lightweight design for the rebar bender, keeping in mind its use in the field. We pursue convenience that goes beyond just the performance of the machine itself. We also offer options such as a foot switch and stand set for convenient operation while standing, and small R rollers for bending with a small radius. 【Features】 ○ Can bend angles up to 135 degrees continuously and freely ○ Can bend up to 3 D10 rebar or 2 D13 rebar simultaneously ○ Can bend even when rebar is already placed ○ Handy type with a weight of 15.0 kg for easy portability For more details, please contact us or download the catalog.

• Other work tools

Rebar Bender "Portable Bender" excels in stability and can bend 3 or 4 bars simultaneously. The rebar bender designed for bending rebar has been developed with a focus on being compact and lightweight for use on-site. We pursue convenience that goes beyond just the performance of the machine itself. We also offer options such as a foot switch and stand set for convenient operation while standing, and small R rollers for bending with a small radius. 【Features】 ○ Angle settings can be switched with one touch ○ Butterfly screws are used for the roller stop bolts ○ Rollers can be replaced without tools ○ Hoop, stirrup, and step bending are also possible For more details, please contact us or download the catalog.

• Other work tools

Rebar Cutter "Manual Hydraulic Cutter" does not require power supply or batteries as it is manual. The head can rotate 360 degrees, making it usable in tight spaces. 【Features】 ○ Adoption of an airbag inside the body achieves a slim head ○ Well-received not only for regular job sites but also for disaster and rescue use ○ Equipped with a release lever that allows hydraulic release even when rebar is jammed ○ Installation of a debris prevention guard reduces accidents caused by cut rebar pieces For more details, please contact us or download the catalog.

• cutter

The rebar cutter "45-degree cutter" can not only perform standard cutting but also cut bolts and rebar at a 45-degree angle for the installation of adhesive anchors. 【Features】 ○ Capable of cutting materials at a diagonal 45-degree angle in addition to standard cutting ○ Materials cut at a diagonal 45-degree angle can be used directly for the installation of adhesive anchors ○ Equipped with a release valve mechanism that allows hydraulic release even when rebar is jammed ○ Installation of a debris guard reduces accidents caused by flying rebar cutting pieces For more details, please contact us or download the catalog.

• cutter

Rebar Cutter "Electric Hydraulic Cutter" is a corded rebar cutter with outstanding durability. 【Features】 ○ Equipped with a release valve mechanism that allows hydraulic release even when rebar is jammed ○ Installation of a debris prevention guard reduces accidents caused by cutting fragments of rebar For more details, please contact us or download the catalog.

• cutter

Rebar Cutter "Cordless Cutter" is a rechargeable rebar cutter that can be taken to job sites without power supply. 【Features】 ○ Adoption of an airbag inside the body achieves a slim head ○ Equipped with a release valve mechanism that allows hydraulic release even when rebar is jammed ○ Installation of a debris prevention guard reduces accidents caused by rebar cutting fragments For more details, please contact us or download the catalog.

• cutter

The rebar cutter "Chipsaw Cutter" allows for smooth right-angle cutting with just a simple push of the lever after clamping the rebar. 【Features】 - Smooth right-angle cutting eliminates the need for grinding, allowing for immediate entry into pressure welding work. - Easy operation with just a lever push after clamping the rebar. - Highly praised for its ease of use on-site. For more details, please contact us or download the catalog.

• cutter

The rebar cutter "Tsuraichi Cutter" is far more "efficient" and "safe" compared to removal work using a grinder, and it doesn't get in the way after cutting. It features a large-capacity lithium-ion battery DC18V・5.0Ah, significantly boosting power. You can work effortlessly at any site. For more details, please contact us or download the catalog.

• cutter

The rock splitter "DS-230XM" is compact and portable for one person, as it is an integrated unit with a built-in hydraulic mechanism. There are no separate high-pressure hoses or hydraulic units, making it safe and easy to move. Compared to conventional methods, it produces no vibrations or noise. It can be used with a 100V power supply, making it suitable for urban areas, roads, and sediment control dams without restrictions on location. You can predict the direction of splitting, allowing you to safely and reliably split rock in your desired direction. For more details, please download the catalog or contact us.

• Other work tools

The air pile driver "DPD-40X / DPD-80X / DPD-120X" demonstrates its power in various applications, including driving guardrail posts, wooden piles, single pipes, steel sheet piles, and steel foundation piles. The power source is compressed air from a compressor. It is widely used in road construction sites, fence installation, and the installation of posts in farms and orchards. We offer three types to choose from based on your needs. For more details, please download the catalog or contact us.

• Other work tools

The reciprocating saw "DRS-300XM/DRS-300XA" can cut various materials, including cast iron pipes, steel pipes, lightweight H-beams, and angles. Its compact size and clamp design allow for operation in tight spaces, and it produces very few sparks. We offer machine saws in various sizes to match the cutting materials. Two types are available: air type and motor type. For more details, please download the catalog or contact us.

• Other work tools

The wire cutter "DCW-22" can cut wire ropes up to 22mm in just 3.5 seconds. It is equipped with a release pulp mechanism, allowing for hydraulic release even if wire fragments get jammed. The motor features a safety design with double insulation, enabling use without grounding. For more details, please download the catalog or contact us.

• Other work tools

The product concept is "cutting," "piercing," "bending," and "connecting." The DIAMOND brand, built over half a century, is supported by unique development capabilities and precise technology, and has permeated the world as numerous products, becoming synonymous with high quality and durability. For more details, please download the catalog or contact us.

• Other work tools

Normal cutting and 45-degree cut. A dual-purpose D16/M16 cutter. 【Features】 ○ 45-degree cuts for adhesive anchors can be easily made on-site. ○ Can cut rebar up to D16 and fully threaded bolts up to W5/8 (M16). ○ Equipped with a release valve mechanism that allows hydraulic pressure to be released during rebar biting. ○ The anti-splash guard protects the user from cutting debris. ● For other functions and details, please contact us.

• Other work tools