ノズルネットワーク List of Products and Services

"Miracle Fog" is a technology that can atomize oil to a micron level at a low air pressure of just 50 kPa. It allows for the spraying of high-viscosity liquids, such as hair oils and beauty serums, which are difficult to atomize, while maintaining low energy consumption and controlling air pressure and air volume. This technology can be utilized in research institutions conducting spraying experiments, as well as in the development of cosmetics and beauty devices. 【Features】 ■ Atomization at low air pressure (minimum 50 kPa) and reduced air volume ■ Fine spraying of high-viscosity oils is possible ■ Products with domestic patents obtained and PCT international applications filed *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• nozzle

A palm-sized 6-volt compressor uses newly developed rebound fog technology to micronize hair oil, and then the fog is sprayed at ultra-low speed from a hairbrush to coat the scalp and the surface of the hair.

• nozzle

"Miracle Fog" is a technology that can atomize oil to a few microns level at a low air pressure of just 50 kPa. It can spray high-viscosity liquids, including hair oils and beauty serums that are difficult to atomize, with low energy while controlling air pressure and air volume. It can be utilized in research institutions conducting spraying experiments and in the development of cosmetics and beauty devices. 【Features】 ■ Atomization at low air pressure (minimum 50 kPa) and reduced air volume ■ Fine spraying of high-viscosity oils is possible ■ Products with domestic patents obtained and PCT international applications filed *For more details, please refer to the materials. Feel free to contact us as well.

• nozzle

We would like to introduce the "Miracle Fog KEN110023BS" that we handle. This is an air spray nozzle developed in collaboration with an automotive manufacturer's engine research laboratory, featuring a narrow-angle circular pattern. It achieves an average particle diameter comparable to conventional nozzles with only a fraction (compared to our company) of the air volume used by traditional air spray nozzles. 【Overview】 ■ Nozzle Name: Miracle Fog ■ Model Number: KEN110023BS ■ Spray Principle: Air Spray *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce the "Miracle Fog KEN15400" that we handle. By controlling air pressure and water pressure, it allows for a large amount of fog to be dispersed over a wide area with fine particles. It is useful for precise humidity control in semiconductor factories. Please feel free to contact us when you need assistance. 【Overview】 ■ Nozzle Name: Miracle Fog ■ Model Number: KEN15400 ■ Spraying Principle: Air Spray *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce the "Miracle Fog KEN0980" that we handle. By controlling air pressure and water pressure, it is possible to combine fog volume and particle diameter over a wide range. It is used by major automobile manufacturers to control humidity within plus or minus 1%. 【Overview】 ■ Nozzle Name: Miracle Fog ■ Model Number: KEN0980 ■ Spraying Principle: Air Spray *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce the "Miracle Fog KEN04130SS" that we handle. It allows for significant energy savings by achieving an average particle diameter comparable to conventional nozzles with about 1/20th the air volume of traditional air spray nozzles (compared to our products). This is a circular pattern air spray nozzle developed in collaboration with an automotive manufacturer's engine research laboratory. 【Overview】 ■ Nozzle Name: Miracle Fog ■ Model Number: KEN04130SS ■ Spray Principle: Air Spray *For more details, please download the PDF (English version) or feel free to contact us.

• nozzle

We would like to introduce the "Miracle Fog MF008D-009E" that we handle. With just one low-pressure compressor used in the aeration tank, it is possible to simultaneously spray 10 Miracle Fog nozzles. By combining this set with a commercially available blower, diffusion spraying can be achieved at a low cost. Please feel free to contact us when you need assistance. 【Overview】 ■ Nozzle Name: Miracle Fog ■ Model Number: MF008D-009E ■ Spraying Principle: Air Spraying *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce the "Miracle Fog MF008D12NW" that we handle. By arranging 12 units of the unique principle of MF008C, which shares both internal and external mixing of gas and liquid, a stable circular wide-range spray pattern can be achieved. At a siphon height of 100mm and an air pressure of 300kPa, the average particle diameter is below 10μm. (At an air pressure of 300kPa and a lift height of 500mm, the average particle diameter is 7μm.) Although it is a molded resin product, the molding precision is high, and the variation in spray volume is ±8%. [Overview] ■ Nozzle Name: Miracle Fog ■ Model Number: MF008D12NW ■ Spray Principle: Air Spray *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce the "Rebound Fog MF8R3" that we handle. It uses a low-capacity 6-volt compressor to draw the spraying liquid through siphoning, and then sprays it onto the drawn liquid surface to create fine particles through collision. A minimum average particle diameter of less than 1μm can be achieved. It can also spray silicone oil with a viscosity of 300cSt. 【Overview】 ■ Nozzle Name: Rebound Fog ■ Model Number: MF8R3 ■ Spraying Principle: Air Spraying *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce our portable sprayer 'MF8CS'. With a total weight of 1.2 kilograms (without liquid) and a 6-volt battery-powered compressor, it reduces work fatigue with a shoulder strap or waist pouch. Equipped with a miracle nozzle, it enables fine particle spraying even with a low-pressure compressor. Please feel free to contact us when you need assistance. 【Overview】 ■ Nozzle Name: Portable Sprayer ■ Model Number: MF8CS ■ Spraying Principle: Air Spraying *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce the "High Flow Micro Fog MF058MA" that we handle. Inside the unit, liquid is drawn up by the compressor air and its siphoning effect, resulting in fine particles being created through collision, with an average particle diameter of approximately 3μm (SMD) being sprayed in large quantities. Please feel free to contact us when you need assistance. 【Overview】 ■ Nozzle Name: High Flow Micro Fog ■ Model Number: MF058MA ■ Spraying Principle: Air Spraying * For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce our high-flow micro fog unit 'MF20'. It requires a compressor and a pump for the spraying liquid, but it generates a large amount of appropriate fog by combining air pressure and pump pressure. Please feel free to contact us when you need assistance. 【Overview】 ■ Nozzle Name: High-Flow Micro Fog Unit ■ Model Number: MF20 ■ Spraying Principle: Air Spraying *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce our nebulizer, the 'MF342-3FB'. This siphon-type nebulizer promotes atomization by colliding the primary spray with a baffle. It achieves SMD below 10μm at relatively low air pressure, and produces a very soft and low-speed fog flow. Please note that this manual describes the spray liquid as water. While it is possible to spray viscous fluids depending on their viscosity, the spray performance will differ from that of water. 【Overview】 ■ Nozzle Name: Nebulizer ■ Model Number: MF342-3FB ■ Spray Principle: Air Spray *For more details, please download the PDF (English version) or feel free to contact us.

• nozzle

The "Matrix MF58MT" is a nozzle unit developed primarily for engineers researching applications of spraying. For example, when various spraying conditions are needed for research on new technologies or products, this single nozzle unit allows for a wide range of combinations of average particle size and spray volume in a matrix-like manner, making it very convenient. The product manual is written with the assumption that the spraying liquid is water. While it can also spray viscous fluids depending on their viscosity, the spraying performance will differ from that of water. 【Overview】 ■ Nozzle Name: Matrix ■ Model Number: MF58MT ■ Spraying Principle: Air Spray *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce our low-cost syringe atomizer, the 'SA-01V1'. This device does not use a mechanical compressor; instead, it sets a cartridge filled with spray liquid into an empty syringe along with a fine elbow. By pressing the syringe piston with your finger, it sends out pressurized air, which blows fog from the elbow at the tip. It can also spray low-viscosity oils. 【Overview】 ■ Nozzle Name: Low-Cost Syringe Atomizer ■ Model Number: SA-01V1 ■ Spraying Principle: Air Spraying *For more details, please download the PDF or feel free to contact us.

• nozzle

The "Mokumoku Pattern MF004V6" is a nozzle with a delicate spray pattern that has a soft touch. It is a nozzle designed for softer short-range spraying with low air energy spray. We recommend using it within an air pressure range of 50 to 100 kPa. Please feel free to contact us if you have any inquiries. 【Overview】 ■ Nozzle Name: Mokumoku Pattern ■ Model Number: MF004V6 ■ Spray Principle: Air Spray *For more details, please download the PDF or feel free to contact us.

• nozzle

The "Miracle Fog MINI Model [Wet AAA]" is a nozzle made of molded resin weighing just 1 gram. Although it is a 1-gram resin nozzle, it maintains an almost perfect dimensional accuracy of 1/1000mm in areas related to spray performance for molded resin nozzles. This nozzle, which has been developed over more than 10 years of research to achieve record-breaking fine atomization using a siphon-type air spray mechanism, has achieved a minimum average particle diameter of 2.76μm. It maintains the highest level of spray pattern at air pressures ranging from 30 to 500 kPa, and after 1000 hours of continuous spraying at an air pressure of 300 kPa, there is zero wear. 【Overview】 ■ Nozzle Name: Miracle Fog MINI ■ Model Number: Model [Wet AAA] ■ Spray Principle: Air Spray *For more details, please download the PDF or feel free to contact us.

• nozzle

The "Miracle Fog MINI MF008C" is a unique nozzle made of molded resin that shares both internal and external mixing principles. It achieves a stable spray pattern without disturbances or droplets over a wide range of air pressures from 30 kPa to 500 kPa. It can easily spray low-viscosity liquids. In particular, even at the minimum air pressure of 30 kPa, the average particle diameter is 22 μm, and at 300 kPa, it is below 10 μm. (At an air pressure of 300 kPa and a suction height of 500 mm, the average particle diameter is 7 μm.) Although it is a molded resin product, it has high molding accuracy, with a variation in spray volume of ±8%, and we can accommodate custom requests for ±3%. 【Overview】 ■ Nozzle Name: Miracle Fog MINI ■ Model Number: MF008C ■ Spray Principle: Air Spray *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce our palm-specific micro fog nozzle 'MF008D'. Originally, the siphon principle of air spraying aims to atomize the spraying liquid, but for hand disinfection, it is essential to meet the following conditions: (1) the disinfectant liquid adequately moistens the hands, and (2) the disinfectant liquid does not disperse into the surrounding area. As a result of repeated prototype testing aimed at these conditions, we have developed a practical nozzle that operates on a siphon system with an extremely low air pressure of 25 kPa and an average particle diameter of 25 μm, which is close to the essential requirements. 【Overview】 ■ Nozzle Name: Palm-Specific Micro Fog Nozzle ■ Model Number: MF008D ■ Spraying Principle: Air Spraying *For more details, please download the PDF or feel free to contact us.

• nozzle

The small diameter nozzle "FC3 FC5" is an airless nozzle developed for the medical research departments of national universities. It can spray slightly viscous liquids. Good spraying can be achieved with a liquid pressure of 50 to 500 kPa. There are two sizes of long pipes: an outer diameter of φ3.7mm (total length 485mm) and φ5mm (total length 383mm), made of stainless steel. 【Overview】 ■ Nozzle Name: Small Diameter Nozzle ■ Model Number: FC3 FC5 ■ Spraying Principle: Airless *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce our small-diameter nozzle (National University Medical School) 'FC5.0-291'. This is a custom nozzle that combines a disposable syringe with a stainless steel long pipe-type nozzle to spray trehalose (moisturizing solution) into the body. The outer diameter of the pipe section is φ5mm x length 160mm, and the material is stainless steel. 【Overview】 ■ Nozzle Name: Small-Diameter Nozzle (National University Medical School) ■ Model Number: FC5.0-291 ■ Spraying Principle: Airless *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce our airless atomizer, the 'MF-LQ 5'. We have developed a disposable airless nozzle that produces a fine mist using a commercially available syringe and our uniquely developed airless nozzle set. By using a commercially available 1ml syringe as a liquid pump, you can instantly release a fog from the airless nozzle attached to the tip of the syringe by quickly pushing the piston with your finger. 【Overview】 ■ Nozzle Name: Airless Atomizer ■ Model Number: MF-LQ 5 ■ Spraying Principle: Airless *For more details, please download the PDF or feel free to contact us.

• nozzle

We would like to introduce the prototype data for the "Rebound Fog Unit" that we handle. Rebound fog is a principle that promotes secondary fine atomization by spraying the siphon-type air spray nozzle onto the liquid surface of a bottle. We filled the bottle with approximately 70% liquid and sprayed it by connecting the tube to the compressor. 【Unit Specifications (Excerpt)】 ■ Material: Polypropylene ■ Unit Size ・ Maximum Diameter (Main Body): φ32mm ・ Total Height: 129mm ・ Spray Nozzle Diameter: φ5mm *For more details, please download the PDF or feel free to contact us.

• nozzle

Nozzle Network Co., Ltd. has discovered the micro-atomization promotion technology "Miracle Fog," which reduces room temperature oil to a few microns, after many years of research and development. In the future, we will consider collaborating with manufacturers of beauty devices and medical devices for the application and contract trial production of Miracle Fog products, as well as licensing of Miracle Fog. Please feel free to contact us when needed. 【Example of Use with Commercial Hair Brush】 ■ Spray Liquid: Commercial Hair Oil (Viscosity: Equivalent to Silicone Oil 50cst) ■ Average Particle Diameter: SMD 1.2μm ■ Spray Amount: 0.07ml/min ■ Air Pressure: 50kPa ■ Air Volume: 1.2NL/min *For more details, please download the PDF or feel free to contact us.

• Brush

Features of Miracle Fog 1. Energy-saving air spraying principle different from conventional methods 2. Atomization of viscous liquids even at low air pressure and low air consumption 3. Mass production possible through mold forming 4. Applicable to a variety of uses 5. Resin products with excellent wear resistance

• nozzle

This catalog is a product catalog for the micro fog unit of a company that mainly provides spray nozzle information services via the web. It includes content with variable droplet diameters and spray volumes for researchers in spray application studies, as well as an overview of the "Matrix MF58MT," which is currently under domestic and international patent application, along with characteristic data. [Overview] ■ Micro Fog Unit *For more details, please refer to the catalog or feel free to contact us.

• Other experimental equipment

This is a spray unit developed for engineers who primarily research spray applications. For example, when various spray conditions are needed in the research of new technologies or products, this single unit can combine a wide range of average particle sizes and spray volumes, making it very convenient. (Patent applications pending in Japan and abroad)

• Other laboratory equipment and containers

NNC leverages its 40 years of experience in nozzle technology to provide unparalleled nozzle technology consulting services in the global nozzle market.

• nozzle

NNC leverages its 40 years of experience in spray nozzle technology to develop the unparalleled "Global Spray Nozzle Information Service - NOZNET" in the global spray nozzle market. Now, with this track record, we search for and propose high-quality, low-cost spray nozzle products from around the world for spray nozzle users globally.

• nozzle
• Piping Materials
• stainless