ワイテック List of Products and Services

The "HC840" is a deburring tool that performs sanding while tracing an arc of about 10 degrees with high-frequency vibrations. It uses paper with Velcro, making it easy to change the grit of the paper, allowing for work at any desired finishing grit. Since it is not a rotary tool, it can be operated safely and easily compared to a grinder, which also helps reduce the burden on the operator. 【Features】 ■ Feels like sanding by hand ■ Can finish work at a speed less than 1/10 of hand finishing ■ Uses paper with Velcro ■ Safer and easier compared to grinders ■ Durable paper pads are available in fine grits *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "X-bar" is a deburring tool suitable for processing PL burrs, which are difficult to handle with cutters due to the lack of a blade, posing risks to the safety of the operator and potential damage to the product. It can finish without leaving grinding marks and without excessive removal of material. When switched for internal diameter burrs, it can also remove burrs from holes that were previously worked on with sandpaper without causing any scratches. 【Features】 ■ Can be attached to commercially available general-purpose cutters ■ Safe with no blade and excellent durability ■ Can finish without leaving grinding marks and without excessive removal of material ■ Can remove burrs from holes that were previously worked on with sandpaper without causing scratches ■ The bar material is iron, while the workpiece is resin, providing outstanding durability *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Flash DB" is a deburring tool developed to meet the needs of those who do not want to damage their workpieces but still want to remove burrs cleanly. During one rotation, the cutting edge is active only twice. For the rest of the time, it functions as a guide roller, allowing for material removal with just pressure adjustment. Even PL burrs on hard materials that take time to process can be removed instantly with just a simple pass. This is a super tool that can handle burrs from multiple angles with just one device. 【Features】 ■ Removes only PL burrs ■ Suitable for hard material workpieces ■ The cutting edge is active only twice during one rotation ■ Can remove material with just pressure adjustment ■ Instantly removes burrs with just a simple pass *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Twister DB" is a tool that effectively removes thin burrs from holes with a diameter of 3φ or larger by utilizing edges with a twisted shape that vibrate back and forth. It is also capable of quickly removing burrs from complex-shaped holes that are difficult to access by simply running a bar over them. With a length of 200mm, it can be inserted into recessed areas to remove burrs in a short amount of time, thereby reducing labor hours. 【Features】 ■ Edges with a twisted shape vibrate back and forth ■ Effectively removes thin burrs from holes with a diameter of 3φ or larger ■ Can quickly remove burrs by running a bar over them ■ Utilizes a length of 200mm ■ Capable of removing burrs in a short amount of time *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

HAGOITA is a tool that can handle everything from rough burr removal to mirror finishing with just one unit. By moving it with a bit of flex, you can simultaneously remove both tightly adhered burrs and fine burrs. It can be used in various scenarios without being limited to specific materials by changing the grit of the paper, from resin to metal. By selecting the appropriate tool based on the shape of the workpiece, you can achieve a cleaner finish in a shorter time. With a hook-and-loop paper system, changing grits is much easier compared to metal files, allowing for grit changes according to the desired finish level. We offer a lineup of highly durable paper specifically designed for HAGOITA.

• Air Tools

The tool sands while tracing an arc of about 10 degrees with high-frequency vibrations. Since it uses paper with Velcro, the grit of the paper can be easily replaced, allowing for work with any desired finishing grit. It is not a rotary tool, so it can be used safely and easily compared to a grinder, reducing the burden on the operator. There are also durable paper pads with fine grits available, so you can choose according to the frequency of paper replacement.

• Other machine tools

Using a cutter poses risks to the safety of the operator and can damage the product, making it difficult to use for processing PL burrs. With X-bar, there is "no blade," which makes it very safe in that regard. It leaves no grinding marks and can finish without over-removing material. If you switch it for inner diameter burrs, you can remove hole burrs that were previously worked on with paper without causing any damage. The bar's material is iron, while the workpiece is resin, ensuring excellent durability!

• Other machine tools

Flash DB, which repeatedly cuts and polishes at high speed like a flash. Developed to meet the needs of those who want to avoid damaging the workpiece while also wanting to remove it cleanly. The moment it becomes a cutting tool during one rotation occurs only twice. For the rest of the time, it functions as a guide roller, allowing for material removal with just pressure adjustment. Even PL burrs on hard materials that take time can be removed instantly with just a trace! This is a super tool that can handle burrs from multiple directions with just one unit. ■ Can be attached to a rotating tool with a 6Φ shank. <Patent pending>

• Other machine tools

The Twister DB is a tool that cleanly removes thin burrs from holes with a diameter of 3Φ or more by using a twisting edge that vibrates back and forth. Even complex-shaped burrs that are difficult to remove can be quickly eliminated by tracing them with the bar. For cross burrs deep inside the hole, the 200mm length of the twist bar allows it to be inserted into recessed areas, enabling quick burr removal and reducing labor time.

• Other machine tools

Despite being low in rotation, the high-torque PISBO spins effortlessly. It was created using the voice of a woman working on-site. Since it uses a paper-type magic pad, it can be easily replaced, allowing for versatile use according to the scene. It can accommodate general-purpose flocked paper with a diameter of 125mm, enabling everything from "grinding" to "polishing" and "buffing" with just this one machine! Additionally, the four corners of the PISBO are equipped with tapped holes, allowing for the installation of fixtures tailored to customer specifications. It is recommended for on-site work that involves tedious manual sanding or heavy grinders. The safety of on-site workers and the stability of quality will improve! ☆ The PISBO is available for a one-week demo rental. Please take this opportunity to try it on-site. (Reservations can be made at TEL 052-508-9275)

• Other machine elements

Silicone is non-adhesive, so it could not be bonded with commercially available adhesives or double-sided tape. At Witec, by applying the "Kiwami" processing to silicone, we have made it possible to bond silicone, which was previously not achievable. If you want to "stick silicone," please consult Witec. It is also possible to apply "Kiwami" processing to the silicone your company uses. Please feel free to consult us if you have specific requirements for double-sided tape or adhesives.

• Rubber

I always end up spending time here... Even if it's not fully automated, if we could just automate half of it... Since jigs and equipment are expensive... To increase productivity, we inevitably face ongoing challenges every day. At Witec, we excel at addressing these kinds of concerns. If you're thinking, "I want to improve this part of the production process," or if you're feeling, "I want to do something about it, but I don't have time to think," please feel free to consult with us. The costs incurred for jigs and equipment will never go to waste!

• Other CAD

I want to create something like this with resin... However, the journey to molding is steep, and it takes a lot of effort and time for communication with various suppliers and discussions about delivery times. Witec provides total support from CAD design of resin to molding and mass production. Depending on your needs, we can accurately turn your "vague ideas" into reality with precise collaboration. If you have something you want to create, please consult with Witec!

• Other CAD

Low hardness silicone is very soft and has adhesive properties, so it is used not only as cushioning and padding material but also as sealing material in areas that require airtightness.

• Rubber

US Silicon is a completely new type of "ultra high tear silicon." It has a tear strength even stronger than high tear silicon, while retaining the basic properties of silicon (weather resistance, ozone resistance, heat resistance, and thermal stability). Custom-made sheets and injection-molded products can be produced from a single piece. Additionally, Wytech can also manufacture US Silicon O-rings. The US Silicon O-rings are molded based on ultra high tear silicon. They have a longer lifespan and better slip properties compared to conventional silicon O-rings, receiving high praise for maintenance of various piping systems.

• Rubber

Silicone is originally "non-adhesive," so it's natural that it cannot be welded... This is where Witec's three-dimensional welding processing overturns such common knowledge! It is a welding processing technology that allows for the three-dimensional processing of silicone, which was traditionally necessary, to be produced "without molds." ■ Round and tapered tubular welding and angular and round flange three-dimensional welding We have achieved flexibility and long lifespan that are not found in conventional fabric ducts, serving as connecting ducts for vibrating parts such as sieves and vibrators. Moreover, being semi-transparent makes it easy to check the flow of fluids, and it is used in various scenes, including food machinery. ■ Frame-shaped welding processing By welding, it has become possible to produce non-standard gaskets larger than the sheet size. At Witec, we accept orders for silicone welding products starting from one piece. We also have silicone bonding processing technology (commercially available double-sided tape and adhesives can be used), so if you have any concerns regarding silicone, please feel free to consult us.

• Rubber

Good news for those troubled by dirt on parts produced during the work process! The Eco Wash Box features a compact design that can be installed between production lines, allowing for remarkably clean washing of circuit boards and parts. Additionally, it has liquid circulation and energy-saving features, making it very economical. It also has rust prevention effects, so you can wash with peace of mind.

• Other cleaning tools

Silicone originally has very excellent properties in heat resistance and chemical resistance, but in terms of tear strength, it was inferior to natural rubber, with a range of 10 to 15 kN/m. "High Tear Strength Silicone" is a product that maintains the conventional excellent properties while enhancing the tear strength, which is a weakness of silicone.

• Rubber

"Fine burrs" that inevitably occur during casting, resin molding, and cutting processes. Conventional deburring machines tend to scratch the workpiece, and many companies resort to manual finishing for deburring tasks. "BARUZO" is a compact air tool that, despite its size, removes fine burrs thoroughly and quickly at over 15,000 vibrations per minute without damaging the workpiece. At Witec, we also design jigs. Depending on various situations, such as wanting to work quietly or for use by women, we can create jigs suitable for your needs for the BARUZO. Please feel free to consult us. We have uploaded videos on our website showing actual deburring using BARUZO. Be sure to check them out.

• Brush
• Other cutting tools
• Other machine tools

Are you struggling with the mountains of paper tubes generated daily at your food factory that uses packaging film? Why not try our recycled plastic core tubes, the "Eco Core Tubes"? Unlike conventional plastic core pipes, this is a composite product finished with ABS pipes and urethane molded parts. The urethane at both ends acts as a cushion, ensuring that there is no breakage or deformation when the core tube falls. Major food manufacturers are already using them, and we have received numerous inquiries from related companies and converter manufacturers. We can also address issues related to lot management in recycling; with our latest laser machine, we can print your company logo, lot number, and even QR codes. Zero paper dust! Zero worries about breakage or chipping! Would you like to try this revolutionary product that reduces CO2 emissions and disposal costs through recycling? We are currently running a free sample campaign. We will ship a dedicated "Eco Core Tube" to your company for free! You can test the printing quality of your logo, company name, lot number, and QR code. For more details, please visit our company website.

• plastic
• Paper and pulp products
• Composite Materials