株式会社HLリニアシステムジャパン List of Products and Services

The "shaft support base" is used in combination with a shaft, housing open unit, and three support points, making installation easy. The support base is made of aluminum alloy, and the length and mounting hole pitch can be customized. We offer products with shaft diameters ranging from 10 to 30 mm, heights from 18 to 37 mm, and widths from 32 to 60 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Shaft Support (Vertical Specification Type)" is an optimal unit for fixing shafts vertically. It is made of aluminum with a white anodized finish to enhance rust resistance. The material composition includes aluminum alloy for the main body and stainless steel for the screws. We offer products with an inner diameter of 10 to 50 mm and a width of 43 to 122 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Shaft Support (Horizontal Specification Type)" is a unit designed to securely fix a shaft in a horizontal position. It is made of aluminum with a white anodized finish to enhance rust resistance. The material composition includes aluminum alloy for the main body and stainless steel for the screws. We offer products with an inner diameter of 10 to 50 mm, a height of 32.8 to 120 mm, and a width of 42 to 126 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Linear Bearing Unit Housing (Long Type)" contains two standard linear bearings inside. The aluminum body has been treated with white anodizing to enhance rust resistance. The material composition of the parts includes aluminum alloy for the housing, SUJ2 for the outer cylinder of the built-in bearings, resin (POM) for the retainer, SUJ2 for the balls, and nitrile rubber for the ring seal. Products with inner diameters ranging from 10 to 50 mm are available. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

Inside the "Linear Bearing Unit Housing (Short Type)," one standard linear bearing is installed. The aluminum body has been treated with white anodizing to enhance rust prevention. The material composition of the parts includes aluminum alloy for the housing, SUJ2 for the outer tube of the built-in bearing, resin (POM) for the retainer, SUJ2 for the balls, and nitrile rubber for the ring seal. Products with an inner diameter of 10 to 40 mm are available in the lineup. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The interior of the "Linear Bearing Unit Housing (Open Type)" is equipped with an open-type linear bearing. The aluminum body has been treated with white anodizing to enhance corrosion resistance. The material composition of the parts includes aluminum alloy for the housing, SUJ2 for the fixed plate, SUJ2 for the outer tube of the built-in bearing, resin (POM) for the retainer, SUJ2 for the balls, and nitrile rubber for the ring seal. Products with inner diameters ranging from 10 to 50 mm are available. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Linear Bearing Unit Standard Housing Type" is equipped with a standard linear bearing inside. The aluminum body has been treated with white anodizing to enhance rust prevention. The material composition of the parts includes aluminum alloy for the housing, SUJ2 for the outer cylinder of the built-in bearing, resin (POM) for the retainer, SUJ2 for the balls, and nitrile rubber for the ring seal. Products with inner diameters ranging from 10 to 50 mm are available. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Oval Flange Long Type (Center)" is a flange-mounted linear bearing that has two resin retainers built in, allowing for increased permissible load and moment compared to the short type. The surface is treated with electroless nickel plating to enhance rust prevention. The material composition of the parts includes SUJ2 for the outer tube, resin (POM) for the retainer, SUJ2 for the balls, and nitrile rubber for the ring seal. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 30 mm, an outer diameter of 12 to 45 mm, and a total length of 35 to 123 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Round Flange Long Type (Center)" is a flange-mounted linear bearing that incorporates two resin retainers, allowing for increased permissible load and moment compared to the short type. The surface is treated with electroless nickel plating to enhance rust prevention. The material composition includes an outer tube made of SUJ2, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 30 mm, an outer diameter of 12 to 45 mm, and a total length of 35 to 123 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Long Type Flange (Center)" is a flange-mounted linear bearing that has two resin retainers incorporated, allowing for increased permissible load and moment compared to the short type. The surface is treated with electroless nickel plating to enhance rust prevention. The material composition of the parts includes SUJ2 for the outer cylinder, resin (POM) for the retainer, SUJ2 for the balls, and nitrile rubber for the ring seal. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 30 mm, an outer diameter of 12 to 45 mm, and a total length of 35 to 123 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Oval Flange Long Type (In-Low)" is a flange-mounted linear bearing that features two resin retainers, allowing for increased permissible load and moment compared to the short type. The surface is treated with electroless nickel plating to enhance rust prevention. The material composition includes an outer tube made of SUJ2, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 30 mm, an outer diameter of 12 to 45 mm, and a total length of 35 to 123 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Round Flange Long Type (In-Low)" is a flange-mounted linear bearing that incorporates two resin retainers, resulting in increased allowable load and moment compared to the short type. The surface is treated with electroless nickel plating to enhance rust prevention. The material composition includes SUJ2 for the outer cylinder, resin (POM) for the retainer, SUJ2 for the balls, and nitrile rubber for the ring seal. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 30 mm, an outer diameter of 12 to 45 mm, and a total length of 35 to 123 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Corner Flange Long Type (In-Low)" is a flange-mounted linear bearing that incorporates two resin retainers, allowing for increased allowable load and moment compared to the short type. The surface is treated with electroless nickel plating to enhance rust resistance. The material composition includes an outer tube made of SUJ2, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 30 mm, an outer diameter of 12 to 45 mm, and a total length of 35 to 123 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Oval Flange Long Type (End Face)" is a flange-mounted linear bearing that incorporates two resin retainers, resulting in increased allowable load and moment compared to the short type. The surface is treated with electroless nickel plating to enhance rust prevention. The material composition includes SUJ2 for the outer tube, resin (POM) for the retainer, SUJ2 for the balls, and nitrile rubber for the ring seal. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 30 mm, an outer diameter of 12 to 45 mm, and a total length of 35 to 123 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Round Flange Long Type (End Face)" is a flange-mounted linear bearing that features two resin retainers, allowing for increased permissible load and moment compared to the short type. The surface is treated with electroless nickel plating to enhance rust resistance. The material composition includes an outer cylinder made of SUJ2, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 30 mm, an outer diameter of 12 to 45 mm, and a total length of 35 to 123 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Corner Flange Long Type (End Face)" is a flange-mounted linear bearing that features two resin retainers, resulting in increased allowable load and moment compared to the short type. The surface is treated with electroless nickel plating to enhance rust prevention. The material composition includes an outer cylinder made of SUJ2, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 30 mm, an outer diameter of 12 to 45 mm, and a total length of 35 to 123 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Oval Flange Short Type (In-Low)" is a flange-equipped linear bearing suitable for compact and space-constrained applications. The surface is treated with electroless nickel plating to enhance rust prevention. The material composition includes an outer tube made of SUJ2, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 40 mm, an outer diameter of 12 to 60 mm, and a total length of 19 to 80 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Round Flange Short Type (In-Low)" is a flange-equipped linear bearing suitable for compact and space-constrained applications. The surface is treated with electroless nickel plating to enhance rust prevention. The material composition of the parts includes an outer tube made of SUJ2, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 60 mm, an outer diameter of 12 to 90 mm, and a total length of 19 to 110 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Corner Flange Short Type (In-Low)" is a flange-equipped linear bearing suitable for compact and space-constrained applications. The surface is treated with electroless nickel plating to enhance rust prevention. The material composition includes an outer tube made of SUJ2, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. We offer products with 4 to 6 rows of balls, inner diameters ranging from 6 to 60 mm, outer diameters from 12 to 90 mm, and total lengths from 19 to 110 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Oval Flange Short Type (End Face)" is a flange-mounted linear bearing suitable for compact and space-constrained applications. The surface is treated with electroless nickel plating to enhance rust resistance. The material composition includes an outer cylinder made of SUJ2, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 40 mm, an outer diameter of 12 to 60 mm, and a total length of 19 to 80 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Round Flange Short Type (End Face)" is a flange-equipped linear bearing suitable for compact and space-constrained applications. The surface is treated with electroless nickel plating to enhance rust resistance. The material composition includes an outer cylinder made of SUJ2, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 60 mm, an outer diameter of 12 to 90 mm, and a total length of 19 to 110 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Short Type Corner Flange (End Face)" is a flanged linear bearing suitable for compact and space-constrained applications. The surface is treated with electroless nickel plating to enhance rust resistance. The material composition includes an outer cylinder made of SUJ2, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. We offer products with a ball row count of 4 to 6, an inner diameter of 6 to 60 mm, an outer diameter of 12 to 90 mm, and a total length of 19 to 110 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

"Self-aligning linear bearings (with resin retainers)" have a structure that allows for automatic adjustment of the inner diameter, automatically adjusting the gap with the shaft. The sliding action is smooth and suitable for high load capacities. The material composition includes a resin (POM) for the outer cylinder and retainer, and SUJ2 for the balls and plates. We offer products with 5 to 6 ball rows, inner diameters ranging from 16 to 50 mm, outer diameters from 28 to 80 mm, and overall lengths from 37 to 100 mm. For more details, please contact us or refer to our catalog.

• Plastic bearings
• Metal bearings

The "slim type linear bearing (with resin retainer)" is a compact design that increases the number of ball rows to enhance load capacity. The material composition includes an outer cylinder made of SUS440C, a retainer made of resin (POM), balls made of SUJ2, and a ring seal made of nitrile rubber. The product lineup includes models with 4 to 9 rows of balls, weights ranging from 11.3 to 250g, inner diameters from 8 to 50mm, outer diameters from 15 to 62mm, and overall lengths from 24 to 70mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

"Stainless Steel Linear Bearings (Metal Retainers)" are particularly suitable for corrosive environments such as water, steam, and sulfuric acid, as well as for vacuum applications. The component material composition consists of an outer cylinder, retainer, balls, and stop ring, all made of SUS440C stainless steel. We offer products with 4 to 6 rows of balls, inner diameters ranging from 10 to 35 mm, outer diameters from 19 to 52 mm, and overall lengths from 29 to 70 mm. For more details, please contact us or refer to our catalog.

• Plastic bearings
• Metal bearings

"Stainless Steel Linear Bearings (with Resin Retainer)" are particularly suitable for corrosive environments such as water, steam, and sulfuric acid, as well as for vacuum applications. The model configuration options include no seal, single seal, and double seal. The material composition consists of an outer tube made of SUS440C, a retainer made of resin (POM), balls made of SUS440C, and ring seals made of nitrile rubber. We offer products with a ball row count of 4 to 6, an inner diameter of 10 to 30 mm, an outer diameter of 19 to 45 mm, and a total length of 29 to 64 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The "Standard Linear Bearing (Metal Retainer)" is a heat-resistant linear bearing. The rubber-free type can be used up to 110 degrees. The model display configuration includes options for no seal, single seal, and double seal. The material composition of the parts consists of SUJ2 for the outer cylinder, SUJ2 for the retainer, SUJ2 for the balls, nitrile rubber for the ring seal, and spring steel for the stop ring. We offer products with a ball row count of 4 to 6, an inner diameter of 10 to 60 mm, an outer diameter of 19 to 90 mm, and a total length of 29 to 110 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

"Long Type Linear Bearings (with Resin Retainer)" are more stable than standard linear bearings during sliding and are suitable for applications with high loads. The model configuration includes options for no seal, single seal, and double seal. The material composition consists of SUJ2 for the outer tube, resin (POM) for the retainer, SUJ2 for the balls, nitrile rubber for the ring seal, and spring steel for the stop ring. We offer products with a ball row count of 4 to 6, inner diameters of 6 to 60 mm, outer diameters of 12 to 90 mm, and overall lengths of 35 to 209 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

The material of the retainer for the "Standard Linear Bearing (Plastic Retainer)" is made of plastic and can be used at temperatures up to 80 degrees Celsius. A rubber seal type is also available. The configuration of the model designation includes options for no seal, single seal, and double seal. The material composition of the components consists of SUJ2 for the outer cylinder, plastic (POM) for the retainer, SUJ2 for the balls, nitrile rubber for the ring seal, and spring steel for the stop ring. We offer products with a ball row count of 4 to 6, an inner diameter of 4 to 60 mm, an outer diameter of 8 to 90 mm, and a total length of 12 to 110 mm. For more details, please contact us or refer to the catalog.

• Plastic bearings
• Metal bearings

This is a comprehensive catalog featuring a wide range of products including linear bearings, housings, and shaft supports. In particular, flange-mounted linear bearings (ball bushes) are easy to install and can reduce total costs. We offer a broad lineup of products suitable for various specifications and applications, ranging from general environments to high temperature, clean, food, and medical uses. Currently, we are providing free samples of linear bearings. Please feel free to contact us as there are limitations on the available sample products and quantities. 【Features】 - High precision and low cost - Rust prevention effect - Free samples of linear bearings available - Ball material can be changed from SUJ2 (high carbon steel) to SUS440C (stainless steel) - Compliant with RoHS directives For more details, please download the catalog or contact us.

• Plastic bearings
• Metal bearings

At HL Linear System Japan Co., Ltd., we accept orders for slide shafts made to order. We can provide samples of the desired slide shafts free of charge, so please feel free to contact us (submission of drawings is required). We will supply regularly used needs from our constant inventory. There are minimum quantity restrictions for lot production, but we will accommodate based on consultation. *Please note that we refrain from supplying shafts that require complex processing or high precision. *For more details, please request our materials or view the PDF data available for download.

• others

Flanged linear bearings (ball bushes) are easy to install and contribute to overall cost reduction. The surface is treated with electroless nickel plating to enhance rust resistance.

• Metal bearings