倉敷レーザー List of Products and Services

The cut edges of products after laser processing are sharp. To prevent injuries such as cuts when handling our products, we also accommodate finishing processes like edge rounding. We have automated the edge rounding process, which was traditionally done manually with a labor-intensive approach. This allows us to provide better products while keeping costs down.

• Processing Contract

Our company utilizes dedicated laser processing machines for pipes to perform laser processing on angles and channels (shaped steel). We can handle not only drilling and cutting of end faces (dimension cutting) but also simultaneous processing of two or more surfaces and custom shapes as per your requirements. We can also mark the outer surfaces, contributing to a reduction in labor during welding and assembly. Additionally, we have machines equipped with tapping tools, allowing us to accommodate requests for tapping processing simultaneously with cutting. 【Features】 ■ High precision cutting with minimal angle defects ■ Ability to process shapes that are less likely to shift during welding and assembly ■ Capable of drilling and notching simultaneously with dimension cutting ■ Reduction of customer labor through marking and tapping processing done simultaneously with cutting *For more details, please feel free to contact us. You can view the "Product Information for Pipe Processing Machines" and "Frame Production Examples" from the PDF download.

• Processing Contract

A major issue with mass-produced bent products is that the workers and press brakes required for production become occupied, making it impossible to take on other jobs. To address this, our company has introduced bending robots, significantly reducing such problems! By distinguishing between tasks performed by robots and those that should be done by humans, productivity has dramatically improved. The bending robot incorporates a multi-joint robot that closely mimics human movements, automatically performing a series of tasks from material loading to processing and product unloading. It can operate unattended at night, allowing for shorter delivery times for mass-produced items and urgent requests, which also reflects in cost savings due to reduced labor. Additionally, since production is done by robots, there is no human-induced variability, making it particularly suitable for manufacturers that require stable quality. 【Features】 - Suitable for mass-produced bent products - Shortened delivery times through nighttime automatic operation - Supports simultaneous setup of multiple molds for automatic operation of various types - High precision and stable quality with angle sensors

• Other processing machines

GEMBA Note - Real-time connection between sales, manufacturing sites, and offices! You can write on drawings and give instructions on-site, speeding up estimation and order processing even from a distance! - Even inexperienced salespeople can collaborate on-site with specialized staff within the company! We can now respond immediately to customer needs! ScanSnap - Portable scanners are deployed at each location! - During customer visits, scan drawings into the tablet before and after meetings! It works perfectly with GEMBA Note, and by uploading drawings to the cloud, we can reduce lead times for estimation and order processing!

• Assembly Machine

Our company, specializing in precision sheet metal processing, possesses numerous high-performance CO2 laser processing machines (6kW) and other equipment in our own factory. We can also handle processing of hole diameters below the plate thickness, and we can process stainless steel medium and thick plates with clean cutting edges and minimal burrs. This reduces the man-hours required for finishing the cutting edges and drilling small holes, achieving shorter delivery times and cost reductions. 【Features of Our Laser Processing】 - Compatible with various metals such as SUS, SS, Al, SBP, Cu, and Ti - Wide range of needs from thin plates to thick plates - Capable of laser hole processing with a minimum diameter of φ1mm (for plate thicknesses of 0.5 to 3t, in the case of stainless steel) - Laser processing can accommodate small diameter holes in thick plates up to the limit *For more details, please refer to the materials. Feel free to contact us as well.

• Processing Contract

We updated the machine that was introduced to our headquarters over 10 years ago, which was known for its brilliant cut of stainless steel thick plates, due to aging. The new machine has advanced technology that allows for processing with a much cleaner and smoother cutting surface than the conventional machines. With fewer burrs, we can significantly reduce the finishing work hours, leading to shorter delivery times and lighter subsequent processes! While many places can only handle laser processing for holes with diameters equal to the plate thickness, in our case, we can perform laser drilling for holes with diameters smaller than the plate thickness. 【Features】 ■ Achieves a smooth cutting surface even for stainless steel thick plates ■ Reduces finishing work hours, leading to shorter delivery times and cost savings ■ Further minimizes the minimum diameter for laser hole processing ■ Reduces work hours for drilling through post-laser cutting drilling *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other processing machines

We launched a brand called "MONO×CRA×SHIKI" as a garage brand. Typically, we manufacture products based on customer drawings in a contract production format, providing our customers with products of unmatched quality. "We want to leverage the manufacturing skills we have cultivated in our regular business to develop original products that can be used casually." "We want to utilize our strength in small-batch, diverse production to meet the needs of various customers." "We want more people to know about our local Kurashiki." With these thoughts in mind, we established the brand "MONO×CRA×SHIKI" in 2020, aiming to plan, develop, and sell our own products in the field of play alongside our main business. Currently, our product lineup mainly consists of outdoor goods developed in-house. Additionally, we also accept original customizations and fully ordered original goods for the products in our lineup.

• others

Our company, which handles sheet metal processing to meet a wide range of needs from thin plates to thick plates, has introduced "pipe processing machines with tapping functions" at our three locations: headquarters, Chubu, and Kyushu. Until now, tapping processing, which required a setup change after cutting and drilling to be performed on a drill press, can now be completed directly from the cutting process. This has significantly improved processing speed and achieved a substantial increase in productivity. ★ In addition to the introduction materials for the processing machines, we are currently showcasing our processing examples! You can view them immediately via "PDF Download." 【Currently Available Processing Examples】 ◎ Welding of dissimilar materials using YAG laser ◎ Frame production without welding ◎ Buff polishing of aluminum products after welding ◎ Fillet welding of iron and stainless steel ◎ Bending processing using a panel bender

• Paper and pulp products

At Kurashiki Laser, bending processing is possible with a panel bender. We can process doors without protruding handles, as well as frames, reinforcement plates, and attaché cases. Please feel free to contact us when you need our services. 【Examples】 ■ Increased strength through a combination of step bending - Can be processed into an integrated structure including R shapes and step bending - Greater design flexibility - Increased strength can also be expected - Free R shapes can be created in the R bending parts without the need for dedicated molds *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract
• Contract manufacturing

At Kurashiki Laser, it is possible to weld corners in an R shape using edge welding. Welded products of the top plate and side plates (U-shaped bending). By welding the corners in an R shape, it can be made to appear as if all edges have been bent. Please feel free to contact us when you need assistance. 【Example】 ■ Welding corners in an R shape - Weld the joint to match the bending R - By welding the corners in an R shape, it can be made to appear as if all edges have been bent - Smooth finish of SUS welded parts without buff polishing - Polished plates are also available *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract
• Contract manufacturing

At Kurashiki Laser, we are capable of welding aluminum products using our unique know-how. Welding aluminum materials, which are prone to cracking after bead cutting, is made possible without causing cracks thanks to our proprietary techniques, allowing us to perform "bead cutting and buff finishing." Please feel free to contact us when you need our services. 【Examples】 ■ Welding of aluminum products - Welding using our unique know-how - "Bead cutting and buff finishing" without causing cracks *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Contract manufacturing

At Kurashiki Laser, YAG laser welding is available. We can perform overlapping welding, which involves welding stainless steel and iron together, as well as dissimilar material welding and continuous welding. Please feel free to contact us when you need our services. 【Examples】 ■ Overlapping welding using YAG laser welding - Dissimilar material welding by overlapping stainless steel and iron - Shapes similar to machined parts can be created by overlapping plates, making it possible to manufacture through sheet metal processing - Reduction in processing time and cost - Used in laminated molds *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Contract manufacturing

At Kurashiki Laser, it is possible to bend pipes and create corner sections. This is made possible by the ability to cut free shapes. A single pipe is laser-cut and the corner sections are bent into an R shape. 【Features】 ■ Capable of free shape cutting ■ Laser cutting of a single pipe ■ Corner sections bent into an R shape *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Contract manufacturing

By introducing a plug-in type into the frame, alignment and temporary assembly before welding can be easily performed. By laser processing the pipes for the frame, time can be reduced during assembly and welding. Additionally, by providing protrusions and holes on the pipes, positioning can be easily achieved. 【Features】 ■ Laser processing of pipes for the frame ■ Time reduction during assembly and welding ■ Cost reduction ■ Easy positioning by providing protrusions and holes on the pipes *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Contract manufacturing

At Kurashiki Laser, it is possible to perform overlapping welding with a YAG laser. Two plates are bonded together, and while they are overlapped, a maze-like line is welded using a YAG laser. By applying pressure with high-pressure gas, it expands like a balloon. This structure has been successfully utilized in "heat exchangers." 【Features】 ■ Welding a maze-like line with a YAG laser while bonding two plates together ■ Expands like a balloon by applying pressure with high-pressure gas ■ Proven track record in heat exchangers *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Contract manufacturing

At Kurashiki Laser, corner welding with YAG laser is possible. Since we can perform continuous beam irradiation instead of pulsed beams, the weld seams are smooth. Traditionally, weld seams had irregularities, leading to issues such as residue of liquids or powders, but we resolve these problems. 【Features】 ■ Continuous beam irradiation instead of pulsed beams ■ Smooth weld seams ■ Issues caused by irregularities are resolved *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Contract manufacturing

At Kurashiki Laser, we offer pipe processing using bevel cuts. Unlike traditional flat laser processing, we achieve angled cuts that resemble those made with a saw through laser processing. Both the ends and holes can be cut at an angle. The surfaces can also be aligned with the inserted pipe. 【Features】 ■ Achieves angled cuts that resemble those made with a saw through laser processing ■ Can cut both ends and holes at an angle ■ Surfaces can be aligned with the inserted pipe *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Contract manufacturing

【Features and Benefits】 - Can easily perform drilling, marking, and positioning hole cutting in a short time. - Capable of processing daikon holes and irregular holes that could only be handled by machining. - Tapping can be performed simultaneously with cutting. 　　　　　　　　　　　　　　　　　　　　　　　　　　etc... There are many more benefits beyond the above. This is a processing machine to keep an eye on in the future, so for more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Contract manufacturing

At Kurashiki Laser, it is possible to perform extrusion processing without the need for dedicated molds. Typically, press processing requires dedicated molds that create uneven shapes, but we achieve this by using roller molds that shape the steps with our multifunction machine (laser and turret punch). This allows for free design of uneven parts in various shapes. 【Features】 ■ No dedicated molds required ■ Uses roller molds to shape steps with a multifunction machine (laser and turret punch) ■ Free design of uneven parts possible (with some limitations such as minimum R) *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract
• Contract manufacturing

At Kurashiki Laser, we have developed a unique method that allows for the easy assembly of square pipe frames by applying the technology of pipe laser processing. Official name: "Square Pipe Orthogonal Connection Method" *Patent obtained [Features] ■ No welding required ■ Realized through proprietary know-how ■ Frame fixation is done using ribs (The ribs themselves are secured with screws to prevent them from coming loose) It is possible to assemble the frame without welding. The frame is fixed using ribs, and we have devised a unique joining method that allows for assembly without welding or tools. Results from strength tests at the Industrial Technology Center indicated that "the strength is believed to be comparable to that of welded square pipe joints." *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Contract manufacturing

This catalog features processing examples handled by Kurashiki Laser. We introduce various cases, including a production example of a frame realized with ribs and screws without the need for welding, and protrusion processing that reinforces using unevenness instead of reinforcement materials. You can view many examples along with photographs. 【Featured Examples (Excerpt)】 ■ Frame production without welding ■ Protrusion processing without the need for dedicated molds ■ Such things can be done with a dedicated pipe machine ■ Pipe processing using bevel cuts ■ Corner welds with YAG laser *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Contract manufacturing

Our company specializes in precision sheet metal processing using laser processing machines, but we also offer "weld-free" bending processing utilizing panel benders. We can achieve complex shapes that are difficult to bend with a press brake without the need for molds. For stainless steel doors, we can create the handle part through a fold-back bending process, allowing for speedy production without the need to weld the handle later. 【Features】 ■ The panel bender can operate unmanned for 24 hours ■ Reduction of welding points contributes to improved quality and cost reduction ■ Capable of mass production *Please feel free to contact us for more details.

• others

We will introduce examples of processing our "square pipe frame" using photographs. The processed products underwent strength testing at the Okayama Prefectural Industrial Testing Institute. The test results indicate that they have strength comparable to welded square pipe joints. Additionally, we are continuously introducing new laser processing machines, boasting one of the leading machine lineups in the country in terms of the number of units owned. Automatic supply and retrieval of materials have been made possible, enabling a full 24-hour operational system. 【Examples】 ■ Technology: Weldless structure ■ Strength test: Strength comparable to welded square pipe joints *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

We have introduced the "High-Power YAG Laser Articulated Robot" and the "Pipe-Specific Laser Processing Machine." The "High-Power YAG Laser Articulated Robot" offers high quality that overturns conventional wisdom in thin plate processing, thanks to a YAG laser processing machine with a maximum output of 4,000W. With the introduction of two articulated robots and one handheld type, it can accommodate various applications from prototyping to mass production. The "Pipe-Specific Laser Processing Machine" is equipped with an automatic loading and unloading device capable of processing pipes up to 6,000mm in length. There are only a few units in the country, and it enables high-precision, high-quality laser cutting compared to general-purpose machines for pipe processing. 【Features】 <High-Power YAG Laser Articulated Robot> - Uniform welding quality with extremely low thermal distortion due to high-quality YAG laser beams. - Wide operational range and high degree of freedom in movement enabled by mobile robots. <Pipe-Specific Laser Processing Machine> - Capable of laser cutting round pipes, square pipes, and irregularly shaped pipes. - Achieves assembly with fitting using metal pipes, similar to the pre-cut method used in wood processing. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

Kurashiki Laser Co., Ltd. At our headquarters, with the introduction of a new type of laser processing machine, we are now able to perform diagonal cuts on round and square pipes that were previously impossible, allowing us to better meet our customers' needs than ever before. For more details, please contact our sales representative, who will bring samples and provide explanations. We encourage you to take this opportunity to try out our new cutting products. 【Business Activities】 ■ Precision sheet metal processing ■ Cutting, bending, and welding of metal sheets using CO2 laser and YAG laser processing machines *For more information, please refer to the PDF document or feel free to contact us.

• Processing Contract

At Kurashiki Laser Co., Ltd., the introduction of the TruLaser Cell 3010 has made it possible to perform both welding and cutting with a single machine, enabling a variety of 2D and 3D processing. Do you think YAG welding has weak welding strength? With the integration of multi-joint robots, welding with continuous (CW) output is possible. Stable welding can be achieved with minimal distortion and bead width, allowing for stacked welding of plates of varying thicknesses (keyhole welding), resulting in a 70% cost reduction compared to traditionally machined parts, and the joint areas can also be machined. 【Features】 ■ Cost reduction ■ Quality improvement (4kW output) ■ Capable of cutting copper, brass, and pure aluminum ■ Supports everything from single items to mass production *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

Kurashiki Laser Co., Ltd. Kansai Sales Office is engaged in precision sheet metal processing and more. A challenge to precision sheet metal that changes manufacturing with light. Additionally, at our traveling exhibition seminars that replicate trade shows held in major metropolitan areas, our sales representatives will visit your company with samples to propose sheet metal products and technologies. Our sales area is also expanding, so please feel free to consult with us during this opportunity. 【Business Content】 ■ Cutting, bending, welding, and processing of metal sheets using CO2 laser and YAG laser processing machines. ■ Precision sheet metal processing *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract

Kurashiki Laser Co., Ltd. Tohoku Branch is engaged in precision sheet metal processing and more. We also hold traveling exhibition presentations that replicate trade shows held in major metropolitan areas. Our sales representatives will visit your company with our samples to propose sheet metal products and technologies. A challenge to precision sheet metal that changes manufacturing with light. We will respond to your requests, so please feel free to contact us. 【Business Activities】 ■ Precision sheet metal processing ■ Cutting, bending, and welding of metal sheets using CO2 laser and YAG laser processing machines *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract

Our company specializes in the manufacturing and processing of cover parts for meat processing machines, water treatment equipment, and refrigerated product transport vehicles. Using laser processing machines and panel benders, we create bent structures without welding. This allows for more intricate designs, as well as weight reduction and increased strength. Additionally, we can perform protrusion processing and step processing without the use of molds, contributing to cost reduction during the prototyping phase. 【We can meet the following requests】 ◎ We want to reduce the weight of the equipment. ◎ We want to incorporate new designs into the equipment. ◎ We want to prototype protrusion processing without making molds. ◎ We want to perform step processing on R-shaped parts. *For more details, please refer to the materials available for download in PDF format or feel free to contact us.

• Processing Contract

At Kurashiki Laser Co., Ltd., we created this work using high laser welding technology, welding entirely from the inside rather than the traditional outside welding. This soccer ball-shaped piece was recognized for its high level of craftsmanship and received the "Excellent Work Award" at the "Micro Manufacturing Okayama Work Contest"! 【Overview and Features of This Work】 ■ Material: Stainless Steel (SUS304 HL) ■ Size: Approximately 30cm ■ Features: All welding of the soccer ball shape is done from the inside No water leakage due to circumferential welding *For details on the processing technology of this work, please refer to the catalog available for download.

• Processing Contract

Did you know that there are various bending processes, such as right angles and folds? However, simply bending isn't very interesting, is it? Kurashiki Laser Co., Ltd. offers proposals for bending processes with excellent design quality, producing products that satisfy designers and engineers. ■*For more details, please refer to the downloadable materials.*■ 【Features】 ○ Quality improvement, speed enhancement, cost reduction ○ High-speed, high-precision, high-quality processing ○ Bending dimension error within 0.1mm ○ Significant reduction in time for 4-sided 8-fold bending (U-shaped bending) ○ No scratches on products with the brush table For more information, please contact us or download the catalog.

• Processing Contract

Our company has numerous achievements in "precision sheet metal processing" and operates a full 24-hour system to handle cutting, bending, and welding processing comprehensively. We are equipped with various facilities to meet a wide range of requests, including not only CO2 lasers but also a "cutting-only machine for YAG disk lasers," a "high-performance compact panel bender" that allows bending without molds, and a "YAG laser welding robot" that enables beautiful welding with minimized distortion using a high-output oscillator. 【Features】 ■ Cutting can be processed from 0.5t to 25.0t (stainless steel) ■ Achieves very smooth cutting surfaces ■ Bending can be done up to 4000mm at 3.0t ■ Capable of handling prototypes, small lots, and mass production ■ Compatible with materials such as SS, SUS, aluminum, brass, and copper ★ In August 2018, we introduced the latest model of a laser processing machine dedicated to pipes at our Chubu office (Kasugai City, Aichi Prefecture), further expanding our processing range and establishing a system capable of producing from prototypes to mass-produced items. *Currently, we are offering case materials! You can view them immediately from "Download."

• Processing Contract

This is an introduction to products made using our bending processing technology. Thanks to the development and innovations during the bending process with 3D-CAD, products with spherical corners can be manufactured. This eliminates the need to partially use cut hemispherical caps at the corners, which is expected to reduce setup labor time. 【Example】 ■Product Name: Bending product with spherical corners ■Application: Various covers, etc. ■Technology: Development with 3D-CAD and innovations during the bending process *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

This is an introduction to processed products made using our welding technology. For shapes that were traditionally machined and do not require high strength, we create the desired shape by stacking plates and performing keyhole welding with a YAG laser in the thickness direction. Since we can substitute products with sheet metal processing instead of machining, we can achieve a reduction in manufacturing costs. 【Example】 ■Product Name: Alternative parts for machined products utilizing keyhole welding ■Application: Various devices ■Technology: Keyhole welding with YAG laser *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

This is an introduction to the processed products manufactured using our welding technology. After performing YAG laser welding on two sheets of thin plate stacked together, we apply high-pressure gas to expand them, creating a tunnel-like interior. By utilizing this structure, it can be used as a heat exchanger by allowing fluid to flow inside. 【Case Study】 ■Product Name: Heat Exchange Device via Overlapping Welding ■Application: Heat Exchange Device ■Technology: YAG Laser Welding followed by High-Pressure Gas Expansion *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

This is an introduction to processed products made using our panel bender. By using the panel bender, it is possible to perform bending processing of complex shapes. Curl bending at the hinge part can also be done integrally with the main body, reducing welding labor hours. 【Examples】 ■Product Name: Complex Bending Products by Panel Bender ■Usage: Various panel products, steel furniture, etc. ■Technology: Capable of bending processing of complex shapes *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract

This is an introduction to products made using our pipe processing dedicated laser cutting machine. Thanks to the precise control of the dedicated machine, it is possible to process features such as the fitting shapes of butt joints. This makes alignment before welding easier and is expected to improve work efficiency. 【Example】 ■Product Name: Pipe cutting products made with a dedicated laser cutting machine ■Usage: Various frames assembled from pipes ■Technology: Processing through precise control of the dedicated machine *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

Our company delivers stable products, focusing on YAG laser welding robots and TIG welding robots. In particular, YAG laser welding has achieved high-quality and beautiful welds by minimizing distortion through the possession of high-output transmitters. The "Powder Diverging Chute" is a food machinery component that allows powder products to diverge in two directions after being transported on a conveyor. [Features and Examples (Photos)] ■ The inner corner welding of separation chutes for food machinery can also be done with YAG robot welding. ■ By performing laser welding, we were able to minimize the weld bead to the limit, allowing powder products to flow smoothly without accumulating on the weld bead, and preventing powder products from entering gaps due to the welding. *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract

We would like to introduce products made using laser processing technology. The R-shaped stepped press-processed plates, which do not require mass production molds, are products developed with the aim of reducing the weight of heavy covers. By creating stepped shapes within the flat cover of thin plates, we can increase strength, reduce thickness, and achieve lightweight designs, as well as ease the removal of covers during maintenance and reduce the overall weight of the machinery. 【Features and Examples (Photos)】 ■ Lightweight and cost reduction achieved through increased surface strength and reduced plate thickness via protrusion processing. ■ For plates with thicknesses ranging from 0.8t to 1.2t made of SS, SUS, or aluminum, bending processing of stepped thickness shapes with a minimum radius of R30 is possible as a single item. ■ Each machine we own is equipped with our self-developed loader and unloader. ■ Automatic supply and automatic collection are possible, enabling a 24-hour full operation system. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

The "thread chamfering machine" can handle various materials and shapes, including SS, stainless steel, aluminum, brass, and copper. As long as the product can fit inside the workpiece and be moved lightly with both hands, it can be used by anyone, regardless of gender, for long periods of work. In our factory, it is currently playing a significant role in thread chamfering after laser cutting. Even new part-time employees can easily use it, and it meets certain standards.

• Food Cleaning Equipment
• Box making machine
• Food Packaging Machinery

SS non-oxidative cutting has begun. Stainless steel, of course, can be cut non-oxidatively up to 9.0t. By eliminating the oxide film on the cutting surface, we can reduce the pre-painting processes, preventing paint peeling and the need for touch-up painting. Furthermore, during welding, there will be no contamination from foreign substances such as oxide films. For free samples, please contact our sales representative.

• Painting Machine
• Vehicle body parts
• Processing Contract

The thread chamfering machine "KL1310CF" allows anyone to easily chamfer threads simply by moving the workpiece left and right. It can also be used by part-time workers. The size of the chamfer depends on your control. The work area is well-lit, allowing you to work while checking the finish of the chamfer. 【Features】 ○ Power supply: AC100V ○ Can use commercially available grinding belts ○ Bright work area For more details, please contact us or download the catalog.

• Other processing machines

By requesting from Kurashiki Laser, it is possible to perform protrusion processing without the need for molds. Even if the plate thickness is reduced compared to the current cover, strength can be maintained, allowing for weight reduction. Additionally, incorporating this processing as a highlight can transform the appearance into something quite different from before! Since no molds are used, there are no mold costs, and prototypes and production can be done from just one piece. 【Processing Range】 ○ Maximum processing table size: 1524x3048 For more details, please contact us or download the catalog.

• Processing Contract

If you request Kurashiki Laser, you will receive processed materials with angle cutting, hole drilling, and tapping, which can be assembled and temporarily fixed on a flat surface, and then only the final welding is needed to complete the project. Compared to before, the number of units that can be completed in a day has significantly increased. Kurashiki Laser's dedicated pipe processing machine is excellent for processing not only round pipes and square pipes but also angles and channels. 【Features】 ○ Eliminates labor-intensive tasks all at once ○ High precision and high-speed processing For more details, please contact us or download the catalog.

• Processing Contract

The traveling exhibition is currently being held primarily in the Chugoku region near our headquarters, aimed at various manufacturers and processing companies, and has received great acclaim from all personnel involved in design, materials, and construction. We understand that at large exhibitions, due to the availability of staff and time constraints, it may not be possible for employees from each company to attend, and that detailed explanations at booths may not be feasible, which can be a concern. Therefore, Kurashiki Laser Co., Ltd. aims to address this by visiting each manufacturer and presenting the latest sheet metal products and technical samples in an exhibition format, where our staff will provide explanations. We hope this will be beneficial for the further advancement of your company's products. 【Features】 - Challenge speed - Challenge quality improvement - Challenge price destruction - Challenge technology For more details, please contact us or download the catalog.

• Exhibition planning/construction