森一産業 List of Products and Services

We would like to introduce our "Falcon Ball End Mill." It can handle both outer circumference and grooves. It also demonstrates outstanding lifespan in five-axis three-dimensional machining. Please adhere to the feed rate per edge as much as possible, and base the cutting speed and feed rate on the feed rate per edge. 【Features】 ■ High efficiency in machining heat-resistant alloys ■ Excellent performance with SUS-related and alloy steels ■ High rigidity even with high hardness materials of HRC 60-65 ■ A design that balances core thickness to minimize vibration and cutting performance *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

The "Dynasty AIR" is a professional sneaker made of A-type artificial leather with water-repellent properties. The air cushion that protects the initial landing point of the heel is offset to the outside. This naturally guides the body weight outward, promoting proper walking posture, and has successfully reduced the weight to approximately 80g per shoe (size 26cm). The toe is equipped with a metal or hard resin toe cap, meeting the safety and durability certification standards set by the Japan Safety Products Association. 【Features】 ■ Made from materials that are resistant to water and rain, making maintenance easy ■ Antibacterial and deodorizing insole; steel wide toe cap ■ Enhanced slip resistance ■ Health structure that supports the arch ■ JSAA certified A-type *For more details, please refer to the PDF document or feel free to contact us.

• Safety shoes and sneakers

We would like to introduce the "special gloves" from Otafuku Gloves that we handle. Starting with the "Soft Catch EX-FIT Safety," we also offer the "MWK," which incorporates aramid and stainless steel wire to enhance cut resistance, as well as the "Super Aramid," which maintains flexibility and durability without compromising the delicate movements of the hands. Please feel free to contact us if you have any inquiries. 【Lineup】 ■ Soft Catch EX-FIT Safety ■ Cut-resistant gloves "MWK" ■ Super Aramid gloves *For more details, please refer to the PDF document or feel free to contact us.

• Work gloves

The "ER-200" is a UV curing resin set for Aiger professionals. It consists of the UV curing repair material "ER-650" and the pen-type UV light "ER-140." It can be used for various applications such as repairing cords, insulation, shaping lures, and making accessories. Please feel free to contact us when you need assistance. 【Basic Usage】 ■ Layer 1: Apply approximately 1mm and cure it. ■ Layer 2: Apply another 1mm on top of the first layer and cure it. ■ Layer 3: Repeat the application and curing process thereafter. *For more details, please refer to the PDF document or feel free to contact us.

• Repair Agent

We would like to introduce the 'JSF500-1/3' that we handle. With casters, it is easy to move, and the static wings allow for straight airflow without diffusion. The angle adjustment bolts enable vertical angle adjustments. This circulator can be used to eliminate air stagnation and as a circulation fan in factories. Please feel free to contact us when you need assistance. 【Features】 ■ Air reach distance: approximately 30m ■ Quiet and comfortable operation (approximately 66dB) ■ Energy-saving (power consumption 175/240W) ■ Easy to move with casters ■ Adjustable vertical angle *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Falcon Emerald End Mill" is an end mill with extremely strong cutting edge rigidity. It enables high-speed machining even in difficult-to-cut material groove processing with a cutting depth of 1D to 2D. It has excellent chip evacuation performance, which leads to reduced time, increased production efficiency, and cost savings. Additionally, we also offer the "Falcon Wave End Mill," which allows for ultra-high feed rates and deep radial cutting during shoulder machining. 【Features】 ■ Core thickness design ■ Unique gash shape ■ Increased production efficiency through time reduction *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

"Rektor Seal" is an easy-to-use repair epoxy putty that can be simply cut and kneaded together. It has various applications such as repairing holes and cracks, adhesion, sealing, molding, and surface reformation. It begins to harden in 5 to 10 minutes and fully sets in 15 to 20 minutes. After more than an hour of hardening, it can be processed by tapping, polishing, or painting. 【Applicable Materials (excerpt)】 ■ Stainless Steel ■ Iron ■ Copper ■ Wood ■ Aluminum *For more details, please refer to the PDF document or feel free to contact us.

• Repair Agent

"Rapid Fix" is an instant adhesive repair material that can quickly repair various materials at high speed. After curing, it can be sanded, drilled, and painted. By combining liquid (polymer liquid adhesive) and powder (welding powder), it makes repairing holes, cracks, and chips easy and powerful. 【Compatible Materials (Excerpt)】 ■SGP ■Metal ■PVC ■Ceramics ■Plastic *For more details, please refer to the PDF document or feel free to contact us.

• Repair Agent

We would like to introduce the "Edge Finder for NC Milling Machines and Machining Centers" that we handle. When the edge finder is attached to a milling chuck and rotated at 500 min-1, it becomes eccentric. By coloring the sides, it has become easier to confirm the moment of sliding. (Excluding EF1010TIN-NM and EF1004TIN-NM) 【Lineup】 ■EF1010 ■EF1010TIN-NM ■EF1004 ■EF1004TIN-NM ■EF0606 *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "JMP-02S (Single Phase 100V)" is a centrifugal mist fan capable of spraying mist over a wide area. It can be directly connected to a water hose. Since it generates mist using a centrifugal method without nozzles, there is no concern about clogging. It can be adjusted to an angle of about 20 degrees above horizontal. 【Features】 ■ Centrifugal method ■ Angle adjustment ■ Automatic oscillation function ■ Water volume adjustment valve ■ Large capacity tank (60L) *For more details, please refer to the PDF document or feel free to contact us.

• Humidification device

The "CoroMill 390" is a face and shoulder milling cutter designed for internal cooling. It accommodates face milling, shoulder milling, helical machining, and plunge machining. It features a cylindrical shank, arbor mounting, vibration-resistant design, and a lightweight type made through additive manufacturing. Custom-made (semi-standard) options are available for short delivery times, and the Inveio coating provides high wear resistance and a long tool life. 【Features】 - Wide range of applications and high performance - Tool diameter: φ9.7 to 200mm - Maximum depth of cut: up to 71mm - Energy-saving cutter that contributes to power savings - Easy to use with small machines *For more details, please refer to the PDF materials or feel free to contact us.

• cutter

The "OH/C/MS type" is a small diameter collet holder that uses ER collets. It supports a maximum of 40,000 RPM (varies by size) and features a design that considers balance, along with finishing processing of the outer shape after heat treatment. With an outer diameter of φ12, it can chuck gripping diameters from φ0.5 to φ5.0. The asymmetric shape of the shank (HSK, SK, CAT) eliminates imbalance through counterbalancing. 【Features】 ■ A wide range of shank sizes available ■ High balance achieved through finishing processing ■ Pre-balance design (cap and shank) ■ Uses ER collets ■ 16° taper used worldwide *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

We would like to introduce the Inplus milling cutters that we handle. We offer the standard type "IEMP01" and the roughing type "IEMP04." We also have milling cutter tips and clamp screws available. Please feel free to contact us if you have any inquiries. 【Product Lineup (Excerpt)】 ＜IEMP01＞ ■IEMP01-012-G16-AP11-01 ■IEMP01-020-G20-AP11-02 ■IEMP01-025-G25-AP11-03 ■IEMP01-032-G32-AP16-03 ■IEMP01-050-G32-AP16-05 *For more details, please refer to the PDF document or feel free to contact us.

• cutter

The "ESK463/793" is a stainless steel cable tie that can be used in all weather conditions, both outdoors and indoors. It can withstand temperatures from -80℃ to 500℃. The loosening after tightening is extremely minimal, making it a product with outstanding cost performance compared to general products. It can be used for securing and bundling exhaust pipes, hoses and piping, motorcycle and car muffler covers, signboards, electrical wires, posts, poles, cables, and more. 【Features】 ■ Strong against direct sunlight and rain ■ Usable in all weather conditions, both outdoors and indoors ■ Heat resistant from -80℃ to 500℃ ■ Extremely minimal loosening after tightening ■ High cost performance *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other safety and hygiene products

The "J450/45Z1V" is an open-type/closed-type stand fan for factories. Equipped with a thermal protector, it offers three levels of airflow: low, medium, and high. It features an automatic oscillation function with approximately 70 degrees of left and right movement, and the height can also be adjusted. Additionally, the "45Z1V" can be folded with its three legs. Please feel free to contact us if you need assistance. 【Specifications】 ■ Power supply: Single-phase 100V ■ Frequency: 50/60Hz ■ Power consumption: 130/150W (J450), 110/130W (45Z1V) ■ Airflow: 161/187m3/min ■ Wind speed: 323/375m/min *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Falcon White End Mill" is a carbide end mill designed for ultra-heat-resistant alloy difficult-to-cut materials. It features an SPWC coating with a helix angle of 51°, and is available in four different model numbers with cutting diameters ranging from 6 to 12 and cutting lengths from 18 to 36. This product has six cutting edges and is used for machining difficult-to-cut materials. Please feel free to contact us if you have any inquiries. 【Product Lineup】 ■SPHF6-6 ■SPHF6-8 ■SPHF6-10 ■SPHF6-12 *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "MT4AL-10" is a live center for NC machines. It is available in two versions: "MT4AL-10" with a tip angle of 60°, a tip diameter of Φ10, and a length of 18L, and "MT4AL-16" with a tip diameter of Φ16 and a length of 30L. It helps avoid interference with cutting tools during NC lathe processing. Please feel free to contact us if you have any requests. 【MT4AL-10 Specifications】 ■Φd: 10 ■L1: 18 ■L2: 103.8 *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

"DIXI 1740" is a carbide drilling thread that consolidates three processes—centering, chamfering at 90°, and drilling—into one tool. With just one tool, it enables a reduction in cycle time, increased productivity, and shortened manufacturing time. In a typical three-step process, the cycle time takes just under 30 seconds, but with this product, it can be reduced to just under 20 seconds. 【Processing Example (Partial)】 ■Dimensions: M1.00×0.25 ■Material: Titanium TAP6400H ■Number of Flutes: 1 ■Processing Depth: 2 ■Rotational Speed: 30,000 *For more details, please refer to the PDF document or feel free to contact us.

• drill

The "Coromill® 415" is a small-diameter high-feed face milling cutter. With a high chip removal rate and a 4-corner insert design, it provides a cost-effective and productive solution. Additionally, the unique iLock™ interface delivers reliable and stable performance. 【Features】 ■ Low cutting resistance ■ Suitable insert material for difficult-to-cut materials ■ Additional insert programs *For more details, please refer to the PDF document or feel free to contact us.

• cutter

The "PHC・SB" is a slim hydro chuck designed for interference prevention during wall-side machining, featuring a slender design. Its unique hydraulic chamber structure achieves high vibration absorption effectiveness. Since the hydraulic chamber surrounds the chucking sleeve, vibrations during cutting are absorbed. We also offer the straight shank hydro chuck "ST-PHC・SB" and the slim hydro chuck blaster "PHC・SB-C/PHC・SB-NC." 【Features】 ■ Runout accuracy: 3μm (4d tip Max 100mm) ■ Good cutting surface due to vibration damping effect ■ Repeatable chucking accuracy: 1μm ■ Easy chucking with just one wrench ■ Maximum allowable rotation speed: 40,000 min^-1 ■ Gripping diameter: Φ3.0 to Φ25.0 *For more details, please refer to the PDF document or feel free to contact us.

• drill

The "3D Tester" is a dial-type reference position measuring instrument that accommodates various measurement objects. With its sophisticated and attractive design, its accuracy and versatility allow for quick and easy verification of zero points and parallelism. It can measure all axial directions (X/Y/Z) with a single unit, enabling precise positioning of workpieces. 【Features】 ■ Non-magnetic ■ Repeatability within 10μm ■ Smart shape ■ Parallelism verification also possible *For more details, please refer to the PDF document or feel free to contact us.

• Distance measuring device

The "Palette Tool 1.5" is a system that allows for efficient lifting and loading operations with a loaded pallet. It can be used in narrow spaces where forklifts cannot operate, as well as for loading and unloading trucks, making it possible to work with a hoist. Additionally, the hook of the chain sling is of the swivel type, which helps prevent the chain from twisting. 【Standard Set】 ■ PTC15 Chain Sling ■ Pallet Bar ■ Width Stop Fitting *For more details, please refer to the PDF document or feel free to contact us.

• palette

The "CoroMill® 331" is a high-precision, multipurpose third cutter. It is preset and shipped with a blade width tolerance of ±0.01mm. There are square insert type, radius insert type, round insert type, and 8-corner type available. Additionally, its unique spring-loaded mechanism allows for smooth adjustments and prevents slippage. 【Features】 ■ Radial runout accuracy ±0.02mm ■ Wide pockets ■ Powerful clamping with wedges ■ Serration method ■ Adjustment range 2-3mm *For more details, please refer to the PDF materials or feel free to contact us.

• Pinion cutter

The "CC Type SCLCR" is a carbide boring bar recommended for small deep hole machining and long overhang machining. Thanks to the V-cut brazing, it achieves high rigidity in the head. There are also options available with oil holes (E) and left-hand types (L). Please feel free to contact us if you have any inquiries. 【Features】 ■ Recommended for small deep hole machining and long overhang machining ■ Achieves high rigidity in the head due to V-cut brazing ■ Prevents chatter ■ Compatible with ISO inserts *For more details, please refer to the PDF document or feel free to contact us.

• driver

"ADVANCE" is a rechargeable LED neck light that can be used as both a handheld light and a neck light. The light unit can be easily attached and detached with a powerful magnet. It is rechargeable, cost-effective, and fits anyone perfectly. Weighing only 150g, it does not put a strain on the neck, and it can be quickly put on without the need for size adjustments. 【Features】 ■ Complies with IP45 standards, resistant to dust and rain, safe for outdoor use ■ The neck-hanging arm can be adjusted to an angle of 110° ■ The arm section is highly flexible, suitable for both men and women ■ Comes with a dual charging cable that allows for charging two units at once *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting

This product is a caster of the PMS type for general industrial use, made from the ultra-high-quality urethane "Ultimate Urethane" series, which achieves high turning start performance. It assists in labor saving and reducing work burden. The high-strength urethane wheels have minimal deformation under load and maintain a small contact area, providing excellent turning and starting performance as well as maneuverability. 【Features】 ■ Reduces work burden ■ Lowers running costs ■ Low noise for comfort *For more details, please refer to the PDF document or feel free to contact us.

• caster

The TM-71 is a compact spray gun that is easy to use, with high air efficiency and the ability to achieve a beautiful finish. It is an HVLP painting machine without a hose. In addition to the complete spray gun set as a standard package, there are a total of 7 accessories including a paint viscosity meter and a bamboo skewer for removing air passage blockages. 【Features】 - Equipped with a trigger pull adjustment stopper for a consistent finish without unevenness. - By changing the installation direction of the suction pipe, it allows for spraying from both the bottom and top. - High safety and ease of use make it suitable for home use. - Compatible with solvent-based paints. - Additionally, it can also spray disinfectants and deodorants. *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine

The "CoroDrill(R)862/462" is a small diameter solid drill with a drill diameter range of φ0.30-3.00mm, made of carbide and polycrystalline diamond (PCD). It comes with a wide lineup for both internal and external cooling. The 862-GM is for various work materials, while the 462-XM is for general use. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■862-GM ・Drill diameter range: φ0.30-3.00mm ・Machining depth: 9×, 12×, 16×Dc ■462-XM (external cooling only) ・Drill diameter range: φ0.030-3.00mm ・Machining depth: 6×Dc *For more details, please refer to the PDF document or feel free to contact us.

• drill

"GC4415/GC4425" is a new material type for steel turning processing that possesses both high resistance to plastic deformation and toughness. It offers excellent heat resistance and wear resistance even in machining processes where cutting heat tends to be high. Additionally, the new base material, which makes extensive use of recycled carbide materials, contributes to minimizing waste for both the chips and the workpiece, demonstrating environmental consideration. 【Features】 ■ Balance of toughness and wear resistance ■ Sustainable steel turning processing ■ Inveio(R) Technology ■ New post-treatment *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "CT・SA" is a super tight lock milling chuck that features a special slit design that allows for heavy cutting while maintaining a slim profile. It can be used at the same permissible rotational speed as the conventional CT・S-E (CT・S high balance type). The gripping power of the milling chuck is so strong that it slightly compresses the tool shank diameter. This gripping force is partially released through the slit, creating a condition where the shank diameter inside the holder is slightly larger than at the mouth, preventing the tool from slipping out. 【Features】 ■ High precision and high rigidity just by tightening ■ High balance ■ Permissible rotational speed: Max. 20,000 min-1 ■ Tool slip prevention slit adopted ■ Compatible with center through coolant *For more details, please refer to the PDF document or feel free to contact us.

• Chuck

The "KS90H" is a cobalt high-speed steel three-blade counter sink with an extended lifespan due to its TiAIN-Nano coating. Thanks to its unique backing treatment, it offers excellent cutting performance and suppresses vibration. Additionally, we also offer the "KSX90H," which features a non-uniform division that significantly reduces vibration compared to the standard type (resulting in better cutting surfaces) and improves surface roughness and roundness. 【Product Lineup】 ■KS90H Standard Type ■KSX90H Non-Uniform Division ■KSX90H Non-Uniform Division (Long Shank Type) *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "Lubroid LS-1000" is a super lubricant spray that achieves chlorine-free, ultra-pressure performance, and a low friction coefficient. It is ideal for protecting metal sliding parts and extending their lifespan. From emergency lubrication rescue for issues such as metal overheating, abnormal wear, and seizure troubles, to being an essential item for preventive and corrective maintenance, it can be utilized effectively. 【Features and Effects】 ■ Instant super lubricant spray ■ Lubrication rescue during lubrication troubles ■ Prevention of galling in metal mating parts ■ Plastic processing ■ Cutting processing ■ Safety *For more details, please refer to the PDF document or feel free to contact us.

• Lubricants

The "Tap Extension Socket" is a product that allows you to extend a standard tap into a long tap. If the tap shank diameter is the same, it can be used with different taps. We have added lengths from M8 to M30, ranging from 350 to 500, and also added W sizes. We also accept custom orders for special items. Please feel free to consult us when you need assistance. 【Lineup】 ■M3 to M60 ■PT1/8 to PT1 ■W1/8 to W1 1/2 *For more details, please refer to the PDF document or feel free to contact us.

• socket

This product is a super high-load caster that exceeds a wall of 6.0t with a wheel diameter of φ300. The bearings in the support bracket's swivel section achieve both smooth turning and durability. The mounting pitch for both the swivel and fixed support brackets is the same, reducing the effort required for cart design. In addition to the new 6.0t type, we also offer the EUYO swivel type and EUYW fixed type. 【Features】 ■ Smooth turning and durability achieved through bearings in the support bracket's swivel section ■ Same mounting pitch for swivel and fixed support brackets, reducing cart design effort ■ Both the wheel and swivel bracket come with grease nipples for easy greasing *For more details, please refer to the PDF document or feel free to contact us.

• caster

The "Bar Off Tool" is a burr removal tool that allows for work to be done in one pass while keeping the spindle in a clockwise rotation, effectively removing burrs from both sides of a hole. It is particularly suitable for deburring and chamfering curved surfaces such as cross holes and lateral holes in pipes. It can be used with various machines you currently own, including single-axis and multi-axis drilling machines, NC lathes, machining centers, dedicated machines, and hand tools. 【Features】 - Automatic chamfering does not require skilled operators - Demonstrates high efficiency in mass production processing with dedicated multi-axis machines - Exhibits power during operations where chips tend to entangle *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "Caster with Safety Cover" is a proposal for improving safety at foot level, aimed at eliminating foot-run-over accidents through proactive measures. The gap is only 3 cm. Foot-run-over accidents can occur even with safety shoes. With our product, it is possible to prevent accidents before they happen. You can choose from various wheels, including "F (rubber)", "FU (urethane)", and "PC (nylon)". 【Lineup】 ■ Swivel Fittings - MCB·J·AZ (steel plate) / MCB·JS·AZ (SUS) ■ Fixed Fittings - MCB·K·AZ (steel plate) / MCB·KS·AZ (SUS) ■ Swivel Fittings with Stopper - MCB·JB·AZ (steel plate) / MCB·JSZ·AZ (SUS) *For more details, please refer to the PDF document or feel free to contact us.

• caster

The "ConeFit Carbide Chamfer End Mill" is a product designed for cutting operations. Model number H3E58318 includes three products with Dc mm 1.5 to 3 and Lc mm 4.25 to 6.5. Additionally, H3E58318 offers products with Dc mm 1.5 and Lc mm 4.23 to 7.23. Various adapters for steel shanks and carbide shanks are also available. 【ConeFit(TM) Head Installation Procedure】 ■ Clean the interface and end face of the head and holder ■ Attach the holder to the adapter ■ Firmly attach the head to the ConeFit(TM) holder by turning it by hand ■ Tighten the head securely using a torque wrench to the specified torque ■ Confirm that there is no gap between the head and the holder's end face *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

"Noga Waters Carmex Tap" is a threading tool that includes high-performance HPC taps with 3 flutes, among others. We offer a wide range of products featuring the high-performance XT3 coating material. Additionally, we provide "general-purpose taps" that can accommodate a wide variety of work materials, as well as "high-performance roll taps" that excel in wear resistance and can achieve a beautiful surface finish on the threads. 【High-Performance HPC Tap Specifications (Partial)】 ■ Model Number: SJ4CM3X0.5H23XT ■ Pitch: 0.5 ■ Accuracy: OH2 ■ Shank Diameter (d2): 4.0 *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "ATB Brush" is a disc brush that can be used with various shapes and materials. Thanks to its unique tufting method, it achieves approximately four times the tufting density compared to conventional products (such as punch brushes). By using nylon filaments with silicon carbide, it enables powerful burr removal. 【Lineup (partial)】 ■604 912-1501 ■604-913-3001 ■604-914-3001 ■604-916-3501 ■604-916-3021 *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

The "Maki Maki Cover" is a cover that attaches to your caster and prevents thread from winding around it using a thread-winding prevention pin. It can be easily retrofitted to your caster. The cover remains stationary while only the wheels rotate, so it does not interfere with movement. The tangled fibers can be easily removed by cutting a portion of them, making maintenance a breeze. Additionally, the cover is sold separately and can also be attached to a stopper-equipped fitting (JB). 【Maki Maki Cover Set Caster Lineup】 ■ FU·J·SB Pin Included (Urethane, Swivel) ■ FU·K·SB Pin Included (Urethane, Fixed) *For more details, please refer to the PDF document or feel free to contact us.

• caster

"Stainless steel casters" are resistant to rust and hydrolysis, and have a high load capacity. When using MCB, especially with a diameter of 130mm or more, the maximum load increases. They are chosen for the harsh environments of food factories. Please feel free to contact us when you need assistance. 【Lineup (partial)】 ■ JS (swivel fittings) ■ KS (fixed fittings) ■ JSZ (swivel fittings with stopper) ■ Left stopper φ100, φ130, φ150, φ200 ■ F white (rubber) made-to-order products *For more details, please refer to the PDF materials or feel free to contact us.

• caster

The "ST・U-CBS" is a coolant bite sleeve for CNC lathes and internal lubrication that prevents coolant leakage from the tool flat area. By adopting a seal stopper (PAT.P), it adheres tightly to the end face of the tool shank under coolant pressure, preventing coolant leakage from the tool flat area. There is no decrease in cutting edge coolant pressure, which improves chip removal and surface finish accuracy. 【Lineup (partial)】 ■ST25U-CBS08 ■ST25U-CBS10 ■ST25U-CBS16 ■ST32U-CBS08 ■ST32U-CBS10 *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The Lockline® coolant hose is suitable for positioning lightweight items that require the supply of liquid, air, and vacuum, as well as precise adjustments during coolant spraying. By combining balls and sockets to create the hose, it can be bent into any shape due to its frictional force, maintaining the spraying direction while allowing coolant to flow. Moreover, it can be applied to various unique processing tasks. We also offer a variety of products, including the "Noga Chip Hook Assembly" and the "1/4 Inch Lockline® Kit." 【Product Lineup (Partial)】 ■ 1/4" Hose Kit ■ 1/4" Flare Tube Kit ■ HAAS Lathe Adapter Kit ■ 15mm Lathe Adapter Kit ■ 1/4" Long Elbow Kit *For more details, please refer to the PDF document or feel free to contact us.

• hose

The "ST・L-PHC" is a hydro chuck for CNC automatic lathes that increases tool life through vibration-damping effects. When attaching tools, the cutting edge does not sink, making it easy to attach and detach tools even in narrow machine interiors. The repeatability of tool attachment and detachment accuracy is 1μm, which streamlines tool changes. 【For these concerns】 ■ Difficulties in tool attachment and detachment due to narrow machine interiors ■ Cutting edge sinks during tool attachment ■ Variability in repeatability of tool attachment and detachment accuracy *For more details, please refer to the PDF document or feel free to contact us.

• drill

The "RNS5-S" is a 5-flute end mill with an irregular lead designed for rough machining using carbide. It features high resistance to chipping due to its reinforced cutting edge. Additionally, it is suitable for soft steel, quenched steel, various stainless steels, and difficult-to-machine materials. We also offer the carbide irregular lead 4-flute square end mill "RNS4-L" and custom-made tools. 【Features】 ■ High-efficiency 5-flute end mill capable of groove machining ■ Excellent chip evacuation with a wide chip pocket ■ High resistance to chipping due to the reinforced cutting edge ■ Compatible with soft steel, quenched steel, various stainless steels, and difficult-to-machine materials ■ High tool rigidity with short cutting edges *For more details, please refer to the PDF document or feel free to contact us.

• End Mills