明治電機工業 Product Lineup

The "CN-37" is a reference temperature checking device designed to check the measurement accuracy of thermal imaging cameras in real-time. It complies with the IEC 80601-2-59 standard and is compatible with all commercially available thermal imaging cameras. By placing this product within the field of view of the thermal imaging camera as a "reference temperature," you can simultaneously measure the reference temperature and human body temperature in real-time, thereby avoiding reading errors in temperature measurements by the thermal imaging camera. 【Features】 ■ Issuance of calibration certificates in the human body surface temperature range ■ Compact and robust design ■ High stability ■ Complies with IEC 80601-2-59 standard Company name: Japan Burns Co., Ltd. *For more details, please refer to the PDF document or feel free to contact us.

• Thermography
• Other electronic measuring instruments
• Other measurement, recording and measuring instruments

The "TDM Compact 3" is a high-precision warpage and deformation measurement system suitable for optimizing component hardening processes. It uses independently controllable heaters for both the upper and lower sections, achieving excellent temperature uniformity. In addition to high-speed heating heaters and convection heating modes, it is equipped with an ultra-high-resolution camera for fine analysis. 【Features】 ■ Complies with JEDEC/JEITA/IPC standards ■ Supports a wide range of applications ■ High-speed heating heaters & convection heating mode ■ Ultra-high-resolution camera for fine analysis ■ Automatic lens switching function (no calibration required) Company Name: Japan Burns Co., Ltd. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

The "Gen6" is a high-precision ultrasonic microscope that can detect even weak signal waveform changes within the gate with higher sensitivity and is capable of imaging. It can simultaneously scan multiple depths and can measure up to 100 gates. Furthermore, with the inclusion of the "SonoSimulator," it supports the analysis of stack dies and thin-film multilayer samples, where it is difficult to separate the interface waveforms of each layer. 【Features】 ■ High-speed sampling rate ■ Water recirculation system ■ Equipped with PolyGate function ■ Standard scan and reference included ■ Compatible with Windows 7 (64bit) Company Name: Japan Burns Co., Ltd. *For more details, please refer to the PDF document or feel free to contact us.

• Other microscopes
• Other inspection equipment and devices

The "FF35 CT" is a high-resolution measurement X-ray CT system capable of accommodating two types of X-ray tubes: a reflection type at 225kV and a transmission type at 190kV (optional). It can handle a wide variety of samples, from fine work such as CFRP to small electronic components and cast parts. As an option, we offer a measurement accuracy of 8μm + L/75 [L = mm] (for measurement use) and a helical CT suitable for imaging laminated materials. 【Features】 ■ Supports a wide variety of samples ■ Capable of accommodating two types of X-ray tubes ■ Measurement accuracy of 8μm + L/75 [L = mm] (measurement CT option) ■ Helical CT suitable for imaging laminated materials (optional) ■ Granite stage with low thermal expansion rate Company Name: YXLON *For more details, please refer to the PDF document or feel free to contact us.

• X-ray inspection equipment
• Other inspection equipment and devices

The "CT Compact" is a high-output X-ray CT system that accommodates a wide variety of samples, from high-density workpieces such as castings to composite modules. It uses a high-output 450kV mini-focus X-ray tube. It can be equipped with two types of detectors: a line detector that minimizes the influence of scattered radiation and a flat panel detector (optional). 【Features】 ■ Accommodates a wide variety of samples, from high-density workpieces such as forged products to composite modules ■ High-output 450kV mini-focus X-ray tube ■ Two types of detectors can be installed Company name: YXLON *For more details, please refer to the PDF document or feel free to contact us.

• X-ray inspection equipment
• Other inspection equipment and devices

The "Cheetah EVO" is a micro-focus X-ray fluoroscopy and CT system with dimensions W1,650 × D1,400 × H2,050 mm. It is equipped with a multi-focus X-ray tube that combines nano-focus mode and high-output mode. In addition to its outstanding expressive power provided by a 16-bit (65,000 gradation) flat panel detector, it is effective for various applications, including not only electronic components but also resin parts, rubber parts, and metal parts. 【Features】 ■ Equipped with a multi-focus X-ray tube that combines nano-focus mode and high-output mode ■ Outstanding expressive power with a 16-bit (65,000 gradation) flat panel detector ■ Effective for various applications Company Name: YXLON *For more details, please refer to the PDF materials or feel free to contact us.

• X-ray inspection equipment
• Other inspection equipment and devices