サンジェム List of Products and Services

The "TYPE 3440A" is a scanner for calibrating multimeters. It can connect up to 8 multimeters and perform automatic calibration. It supports various calibrators from different manufacturers, allowing for the calibration of various multimeters without changing the input cables. It can be used for automatic calibration in the field as well as for automating evaluation tests of electrical components (resistors, capacitors, coils, thermistors, etc.). 【Features】 ■ Supports 6-terminal multimeters with 6-wire 2-circuit 8 channels ■ Input and output terminals are compatible with various connectors such as BNC, MHV, SHV, LEMO, etc. ■ Can handle a maximum current of 12A ■ Utilizes low thermal electromotive force relays ■ Control via USB (GPIB is optional) *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts
• Scanner
• Calibration and repair

The "TYPE 6300B" is a precision AC resistor that achieves an AC-DC error of less than 10 ppm and a phase angle error of less than 50 μrad at frequencies below 10 kHz. The resistance value is extremely stable, making it suitable for use as a standard not only in AC but also in DC. The resistive element is sufficiently heat-treated, providing high stability and a low temperature coefficient, and the connector can be selected as either BPO/MUSA or BNC. 【Features】 ■ Excellent frequency characteristics, designed to minimize phase angle error ■ Connector can be selected as either BPO/MUSA or BNC ■ Suitable for calibration with 4-terminal LCR meters due to its 4-terminal pair structure ■ The resistive element is sufficiently heat-treated, ensuring high stability and a low temperature coefficient ■ Ideal as a calibration standard due to its excellent accuracy, temperature coefficient, and aging characteristics ■ Available in various resistance values, making it useful for a wide range of applications such as temperature measurement *For more details, please refer to the PDF document or feel free to contact us.

• Resistors

The "HLS Series" is a fixed standard inductor with a four-terminal structure for calibrating LCR meters. It is smaller and lighter than conventional standard inductors, making it suitable as a common standard. Due to its BNC structure, it can be directly connected to LCR meters. Additionally, we can also manufacture mutual inductance standard devices, so please feel free to consult us. 【Features】 ■ Suitable for calibration of four-terminal LCR meters due to its four-terminal pair structure ■ Very convenient for on-site calibration due to its compact and lightweight design ■ Uses air-core coils, resulting in excellent voltage and current characteristics ■ Sealed in a metal case, making it less susceptible to external magnetic field influences *For more details, please refer to the PDF document or feel free to contact us.

• Inductor Coil
• Other electronic parts

The "TYPE 6100U" is a standard instrument for calibrating LCR meters, equipped with built-in resistors, capacitors, and inductors necessary for calibration. It allows for manual and automatic switching of connections during measurement frequency, measurement voltage, and DC BIAS voltage calibration. Its compact and lightweight design enables direct connection to LCR meters, making it very convenient for field calibration. Additionally, using software, complete automatic calibration of the LCR meter is possible. 【Features】 - Allows selection of any 19 points for resistors, capacitors, and inductors - Capable of switching between manual and automatic via USB - Calibration can be performed while attached to the LCR meter - Equipped with OPEN and SHORT correction functions, allowing for correction while connected - Complete automatic calibration of the LCR meter is possible using software - The 4-terminal structure is compact and lightweight, allowing for direct connection to LCR meters, making it suitable for on-site calibration - Can also be used as a variable capacitor (4 ranges) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Calibration and repair

The "TYPE 6100A/6100B" is a standard instrument for calibrating LCR meters that incorporates LCR in a single unit. It allows for a wide range of LCR settings. Due to its four-terminal structure, LCR meters can be directly connected. Additionally, its small and lightweight design makes it very convenient for calibration in the field, and the "TYPE 6100B" includes additional 1pF and 10pF settings. 【Features】 ■ Excellent mobility due to the built-in LCR in a single unit ■ Wide range of LCR settings available ■ Suitable as a calibration standard due to superior accuracy, temperature coefficient, and aging characteristics ■ Direct connection of LCR meters possible due to the four-terminal structure ■ OPEN and SHORT corrections can be made while connected to the LCR meter *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "SUN0512" is a device that mechanically outputs 8 input signal channels to 8 output channels in 3 circuits solely through the insertion and removal of connectors (without using relays). It has a USB interface function, allowing for remote control, and can also be controlled via LabVIEW. It can be used for automatic switching and calibration in the field, such as electrical standards and mass standards, as well as for automatic calibration in calibration environments. 【Features】 ■ Can distribute input from 8 wires into 3 output directions for 24 channels ■ Input and output terminals support various connectors such as BNC, MHV, SHV, and LEMO ■ Capable of measuring high voltage and large current ■ Since relays are not used, there are almost no error factors between channels, making it suitable for automatic measurement ■ Easy contact exchange *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Calibration and repair

The "TYPE 6430A/6435A" is a decade attenuator that possesses sufficient characteristics as a standard for ratios and has a wide range of applications for various measurements. It features an IEEE-488 interface, allowing for remote control. With a simple structure, high accuracy, and no variability in response to temperature and humidity conditions, it is durable for long-term use and maintains its characteristics safely. 【Features】 ■ Sufficient characteristics as a standard for ratios, with a wide range of applications for various measurements ■ High input impedance and low output impedance ■ Wide operating frequency range and small phase error ■ Capable of remote control ■ Simple structure, high accuracy, and no variability in response to temperature and humidity conditions ■ Durable for long-term use and maintains its characteristics safely * For more details, please refer to the PDF document or feel free to contact us.

• Transformers
• Other electronic parts

The "TYPE 6230A/6233A" is a four-terminal large-capacity standard capacitor that combines high-performance capacitors and precision transformers, allowing for equivalent large capacities of up to 1F. Capacitance values from 1μF to 1F can be set, and due to its excellent accuracy and stability, it can also be used as a calibration standard for LCR meters. The operating frequencies are available in three ranges: 50Hz, 120Hz, and 1kHz (up to 10mF at 1kHz), and its compact and lightweight design makes it convenient to handle. 【Features】 ■ Capacitance values from 1μF to 1F can be set ■ Three frequency ranges: 50Hz, 120Hz, and 1kHz (up to 10mF at 1kHz) ■ Excellent accuracy, temperature coefficient, and aging characteristics, making it suitable as a calibration standard ■ Compact and lightweight for easy handling ■ By using the Calibration terminal, internal precision transformers can be calibrated, and external standard capacitors can be connected (6233A) *For more details, please refer to the PDF document or feel free to contact us.

• Capacitor

The "TYPE 9610A/8010B" is a switching device that allows for the cancellation of thermoelectric voltage generated during precise DC voltage measurements, such as with Zener DC voltage standards and high-precision digital multimeters, by reversing the polarity of the voltage during measurement. It can be directly connected to binding posts (19mm pitch). The switching can be done automatically by an external signal, minimizing the influence of hand heat from manual switching and greatly reducing the generation of thermoelectric voltage. 【Features】 ■ The change in thermoelectric voltage due to polarity reversal is extremely small, thanks to the use of low thermoelectric voltage relays. ■ The control signal for switching can be operated via a relay controller (Type 8010B), allowing for USB and manual switching operations. ■ Automation of measurements is possible due to USB operation. ■ Since polarity reversal can be switched by an external signal, there is no need for manual switching. ■ There is no generation of thermoelectric voltage from hand heat, allowing for stable measurements in a short time. *For more details, please refer to the PDF document or feel free to contact us.

• switch
• switch

The "TYPE 1010A" is a power calibration device used to compare calibrated power meters with those being calibrated. The system consists of a current transformer and a transducer, allowing for comparative calibration based on a power meter calibrated at 100V, 5A, and extending the comparison calibration range from 0.05mW to 666.666W. Additionally, by changing the current transformer, it is possible to connect large equipment with input currents of up to 100A, which would result in a maximum power comparison calibration range of 25kW. 【Features】 ■ Capable of calibrating various power values ■ Input voltage devices of 200V (max 250V) can also be compared and calibrated ・ This results in a maximum power comparison calibration range of 1.25kW ■ The transducer outputs voltage with a resolution of 1ppm relative to the input voltage ■ The current transformer outputs current with a resolution of 1% in the range of 0% to 120% *For more details, please refer to the PDF document or feel free to contact us.

• Temperature and humidity measuring instruments
• Calibration and repair
• Power meter

It adopts a high-precision current comparison transformer bridge method using a magnetic balance type transformer (current comparator) with a detection winding.

• Other measurement, recording and measuring instruments

Capacitance ranging from 1μF to 1F can be set (with 1/10 step variability possible in the 6230A), and due to its excellent accuracy and stability, it can also be used as a standard instrument for calibrating LCR meters.

• Other measurement, recording and measuring instruments

In the calibration work of alternating current voltage, a small voltage that cannot be output by the calibrator is combined with the calibrator to achieve high-precision output.

• Other measurement, recording and measuring instruments

The external controller (Type 8010A) can be controlled via USB or GP-IB, making automation easy.

• Other measurement, recording and measuring instruments

This device is a scanner that outputs the input signal to one of the 16 output channels mechanically (without using relays) by simply plugging and unplugging the connectors.

• Other measurement, recording and measuring instruments