新倉工業 List of Products and Services

■ Hydrogen gas (Group 2C) compatible type - Hydrogen gas is classified as explosion group 2C, which is highly flammable and can explode with even a small ignition source, necessitating appropriate safety measures. - Compatible with gases from explosion groups 2A, 2B3, 2B, etc., other than explosion group 2C. - The screw connection type is compatible with 2A. ■ Prevents flame escape from bidirectional external ignition sources - Suppresses flame propagation during fires occurring inside and outside the plant, preventing serious secondary disasters. - The entrance and exit are designed to prevent flame escape from both directions. - Can be installed and used in both horizontal and vertical orientations. ■ Uses a clean ribbon type flame suppression element - The clean ribbon (wave-shaped structural component) consists of thin metal wave plates and flat plates of the same material stacked alternately to create gaps, with specifications determined by the gas used. ■ Complies with international standard ISO16852 - Our clean ribbon type frame arrestor is tested with the test gas specified in ISO16852. - Performance verification tests comply with ISO16852:2016. ■ New lineup of Rc1 and Rc1/2 screw connection types - Conducted "flame suppression performance tests" at our in-house testing facility. - Compatible with explosion group 2A.

• Other machine elements

Would you like to reduce the amount of chemicals used during pipe cleaning (CIP cleaning) by utilizing the power of fine bubbles generated by the Shardis mixer to adsorb, destroy, and decompose dirt? By reducing the amount of chemicals used, the quantity of chemicals flowing into the wastewater will also decrease, which is expected to lower the wastewater load. We also have testing equipment available, so why not first check the effectiveness?

• Food Cleaning Equipment
• Food environmental hygiene/contamination prevention equipment

- The Shardis mixer is an inline mixer capable of generating fine bubbles. Furthermore, it has a structure that is resistant to clogging. - This proposal is expected to reduce costs for detergent, water usage, and boiler fuel when cleaning pipes. How about conducting a trial before implementation? - You can consider implementation after confirming the effectiveness.

• Other cleaning machines

Introducing the sludge reduction device "NIIKURA Oni Taiji," which utilizes ozone to reduce excess sludge generated from wastewater treatment, contributing to cost reduction and environmental impact mitigation. **Features of "NIIKURA Oni Taiji":** - Ozone completely dissolves in the wastewater within the device, eliminating "waste ozone." - Significant reduction of excess sludge is possible. - Contributes to the reduction of sludge treatment costs. - When used in conjunction with the "NIIKURA AERATION SYSTEM," excess sludge can be reduced to nearly zero. - Can also be used for wastewater treatment in biogas power generation and COD measures. *For more details, please refer to the PDF document. If you wish to request a practical test, please apply through the contact form.*

• Water treatment equipment
• Aeration/air diffusion equipment
• Wastewater/wastewater treatment equipment

We will solve the wastewater treatment issues you face in your food factory by introducing an "aeration device." With the implementation of this system, the need for pressurized flotation devices will be eliminated. It is possible to reduce costs related to floss treatment and coagulants. Even wastewater that was previously discarded can be reused with advanced treatment, leading to cost savings and reduced expenses for the factory. We also have demo units available, so please feel free to contact us. 【Features】 ■ Reduces equipment maintenance and management costs ■ Odor control ■ Bulking prevention ■ A device that is nearly maintenance-free, significantly reducing labor *For more details, please refer to the PDF materials or feel free to contact us.

• Wastewater/wastewater treatment equipment
• Water treatment equipment
• Other water treatment equipment

Reduce excess sludge generated from wastewater treatment, contributing to cost control and environmental impact reduction. Introducing the wastewater treatment device "NIIKURA AERATION SYSTEM" and the sludge volume reduction device "NIIKURA Oni Taiji." <Features of "NIIKURA AERATION SYSTEM"> - Stabilizes wastewater by increasing dissolved oxygen in unstable wastewater, thereby reducing generated sludge. - Low environmental impact as it does not use chemicals. - Capable of reducing costs for coagulants, sludge treatment, and maintenance. - Reduces unpleasant odors from wastewater and improves the working environment. <Features of "NIIKURA Oni Taiji"> - Ozone completely dissolves in wastewater within the device, eliminating "waste ozone." - Significant reduction of excess sludge is possible. - Contributes to the reduction of sludge treatment costs. - When used in conjunction with the "NIIKURA AERATION SYSTEM," excess sludge can be reduced to nearly zero. *For more details, please refer to the PDF document. If you wish to conduct a real machine test, please apply through the inquiry form.

• Wastewater/wastewater treatment equipment
• Aeration/air diffusion equipment

- The Shardis mixer has a structure that eliminates intersections, making it difficult to clog, which allows for extreme simplification of daily management. - Due to the streamlining of the mixing process, it can be widely used for applications such as ozone sterilization and wastewater treatment. - It can mix liquids with large viscosity differences, slurries, and both gases and liquids.

• Chemicals

Our company will solve the wastewater treatment issues you are facing by introducing "aeration equipment." With the implementation of this system, the need for pressurized floating devices is eliminated. It allows for cost reductions in floc treatment and coagulants. Even wastewater that was previously discarded can be reused through advanced treatment, leading to cost savings and reduced expenses for factories. We also have demo units available, so please feel free to contact us. 【Features】 ■ Reduces equipment maintenance and management costs ■ Reduces excess sludge ■ Nearly maintenance-free equipment, significantly reducing workload *For more details, please refer to the PDF materials or feel free to contact us.

• Wastewater/wastewater treatment equipment
• Water treatment equipment
• Other water treatment equipment

Reducing excess sludge generated from wastewater treatment contributes to cost control and environmental impact reduction. Here is an introduction to the wastewater treatment device "NIIKURA AERATION SYSTEM" and the sludge volume reduction device "NIIKURA Oni Taiji." <Features of "NIIKURA AERATION SYSTEM"> - Stabilizes wastewater by increasing dissolved oxygen in unstable wastewater, thereby reducing generated sludge. - Low environmental impact as it does not use chemicals. - Capable of reducing costs for coagulants, sludge treatment, and maintenance. - Reduces unpleasant odors from wastewater and improves the working environment. <Features of "NIIKURA Oni Taiji"> - Ozone completely dissolves in wastewater within the device, eliminating "waste ozone." - Significant reduction of excess sludge is possible. - Contributes to the reduction of sludge treatment costs. - When used in conjunction with the "NIIKURA AERATION SYSTEM," excess sludge can be reduced to nearly zero. *For more details, please refer to the PDF materials. If you wish to conduct a practical test, please apply through the inquiry form.

• Wastewater/wastewater treatment equipment
• Aeration/air diffusion equipment

- The Shardis mixer has a structure that eliminates intersections and is resistant to clogging, allowing for extreme simplification of daily management. - Due to the streamlining of the mixing process, it can be widely used for applications such as ozone sterilization and wastewater treatment. - It is capable of mixing liquids with significant viscosity differences, as well as slurries, and can mix both gases and liquids.

• Chemicals
• Paper and pulp products
• Fats and oils

"Oni Taiji" is a sludge reduction device that achieves "zero" excess sludge by using it in conjunction with an aeration system. By significantly reducing excess sludge, it can lower the running costs that have been a major burden until now. We have a demonstration unit available, so you can conduct sludge reduction tests at your location and directly confirm its effectiveness. 【Features】 ■ 75% reduction of excess sludge ■ Zero ozone emissions ■ Near-zero emissions achieved ■ Other cost reductions ■ Decolorization of wastewater *For more details, please refer to the PDF materials or feel free to contact us.

• Wastewater/wastewater treatment equipment
• Water treatment equipment
• Other water treatment equipment

We will solve the wastewater treatment issues you are facing by introducing "aeration equipment." By implementing this system, the need for pressurized floating devices is eliminated. It is possible to reduce costs associated with floss treatment and coagulants. Even wastewater that was previously discarded can be reused through advanced treatment, leading to cost savings and reduced expenses for the factory. We also have demo units available, so please feel free to contact us. 【Features】 ■ Reduces equipment maintenance and management costs ■ Reduces excess sludge ■ Nearly maintenance-free equipment, significantly reducing labor *For more details, please refer to the PDF materials or feel free to contact us.

• Wastewater/wastewater treatment equipment
• Water treatment equipment
• Other water treatment equipment

We would like to introduce the "Single Bucket Strainer" that we handle. It can be stabilized by installing the main body on the floor surface. It is installed before the pump or nozzle. There are "UC Type Strainer (for water)" and "SO Type Strainer (for oil)," which can filter more debris compared to Y-type and T-type, thus reducing the frequency of cleaning. 【Features】 ■ Installed before the pump or nozzle ■ Can be stabilized by installing the main body on the floor surface ■ Capable of filtering more debris compared to Y-type and T-type, reducing the frequency of cleaning *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Other water treatment equipment
• others

We would like to introduce our "Steel Plate T-Type Strainer / Steel Plate Y-Type Strainer." The "Steel Plate T-Type Strainer" can eliminate unnecessary piping and labor by being installed at the bends of the piping. The "Steel Plate Y-Type Strainer" is installed before pumps and nozzles, allowing for space-saving installation. 【Features】 <Steel Plate T-Type Strainer> ■ Installed before pumps and nozzles ■ Eliminates unnecessary piping and labor by being installed at the bends of the piping *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Piping Materials
• others

The "FTS type" is a duplex oil strainer characterized by its unique switching mechanism (Flow Turn). With the handle switching operation to the left or right, it allows for cleaning and replacing the element without stopping the filtered fluid. There is no need to lift the cock, so there is no short pass. Additionally, the element can be fitted with metal mesh, notch wire, or paper. 【Features】 ■ Steel dual-tube switching filter ■ Unique switching mechanism (Flow Turn) ■ Allows for cleaning and replacing the element without stopping the filtered fluid ■ No need to lift the cock ■ No short pass *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Other filters
• Filtration Equipment

The "ST type" is an automatic strainer that can discharge and clean the SS captured by the element without interrupting the flow of the line. The cleaning method is a backwash type using a secondary fluid. As the SS increases, the flow resistance of the element rises, triggering the backwash of the element. 【Features】 ■ The cleaning method is a backwash type using a secondary fluid ■ Can discharge and clean the SS captured by the element without interrupting the flow of the line ■ As the SS increases, the flow resistance of the element rises, triggering the backwash of the element *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Other cleaning machines
• others

The "BSW-PBA-100E Max-STRAINER" is a strainer specifically designed for the alkaline resist stripping device for printed circuit boards. It adopts a multi-cleaning method. Due to its horizontal body shape, it excels in SS discharge performance and cleaning effectiveness. Additionally, there is no need for air bleeding operations, and the inspection of the element release point is easy. 【Features】 ■ Adopts a multi-cleaning method, providing excellent cleaning effectiveness ■ The horizontal body shape excels in SS discharge performance ■ Easy inspection of the element release point ■ No need for air bleeding operations ■ No protrusion of rotating parts *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Other cleaning machines
• others

The "N10-M(A)S type" is a steel plate scraping reverse washing type strainer. As a rust prevention measure for the main body, both the inner and outer surfaces are coated with resin (polyethylene). The main body grade has been made equivalent to SUS. It can be used as a strainer for seawater intake without any issues in coastal areas. The connection flange is standard JIS10K. 【Features】 ■ Rust prevention measures for the main body include resin (polyethylene) coating on both inner and outer surfaces. ■ The main body grade has been made equivalent to SUS. ■ There are no issues using it in coastal areas. ■ Wedge wire element (SUS316L) is standard. ■ The connection flange is standard JIS10K. *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Other water treatment equipment
• others

The "N11 type" is a steel plate strainer that can change its material according to the fluid, featuring scraping and backwashing functions. It standardly employs a wedge wire element (SUS316). It is designed to be suitable for industrial water and seawater. Additionally, the connection flange is based on JIS10K as a standard, and the SS separation (backwashing) method can be changed according to the SS of the fluid. 【Features】 ■ Can change material according to the fluid due to its steel plate construction ■ Standardly employs a wedge wire element (SUS316) ■ Suitable structure for industrial water and seawater ■ Can change the SS separation (backwashing) method according to the SS of the fluid ■ Connection flange is based on JIS10K as a standard *For more details, please refer to the PDF materials or feel free to contact us.

• others
• Water treatment equipment
• Other water treatment equipment

This product is a super wide-angle flat spray nozzle (counterweight type) that features a simple and lightweight structure, making installation easy. When the nozzle outlet is blocked, foreign objects can be easily removed by simply moving the weight part. It is suitable for watering in low-pressure areas. Additionally, it is made of engineering plastic, which has excellent corrosion resistance and is less likely to have foreign objects adhere to it. 【Features】 - Easily remove foreign objects by simply moving the weight part when the nozzle outlet is blocked - Achieves an impact suitable for foam suppression - Ideal for watering in low-pressure areas - Made of engineering plastic with excellent corrosion resistance and low adhesion of foreign objects - Simple and lightweight structure, easy to install *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Other cleaning machines

This product is a micromizer (two-fluid spray nozzle) that atomizes liquid into fine particles and sprays uniform particles. The spray particle size can be adjusted by changing the mixing ratio of air and liquid. It can be used with all types of pressurized systems. It can be utilized in applications such as air conditioning and temperature control equipment for humidification, moisture control, and cooling, as well as in environmental equipment for gas cooling, desulfurization, denitrification, and dust prevention. 【Features】 ■ Atomizes liquid into fine particles and sprays uniform particles ■ Spray particle size can be changed by adjusting the mixing ratio of air and liquid *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Other cleaning machines

This product features a ball joint type that allows for fine adjustment of the spray direction of the spray nozzle. While the spray nozzle is attached, it can be fixed at any angle within a range of 25° on one side (360° rotation). It can be used for equipment that requires fine adjustment of the spray direction or when the spray direction needs to be offset within 25° from the installation position. 【Features】 ■ Allows for fine adjustment of the spray direction of the spray nozzle ■ Can be fixed at any angle within a range of 25° on one side (360° rotation) while the spray nozzle is attached *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• joint
• Piping parts

This product is a lightweight, circular full-spray type (plastic molded) spray nozzle. It sprays water evenly across a circular area thanks to our patented internal blades. It can be offered at a low cost and comes with various performance features. It can be used in exhaust gas treatment equipment such as dust removal and dust prevention, as well as in chemical etching processes, various cleaning devices, and cooling systems. 【Features】 ■ Offered at a low cost ■ Lightweight ■ Various performance features available ■ Even spraying across a circular area due to our patented internal blades *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Other cleaning machines

This product is a rotating sprinkler nozzle that can be used with a maximum outer diameter of 45mm for small insertion hole diameters. It rotates under its own pressure and sprays water using a set of 2 DFNs. Since it rotates by self-pressure, no other driving mechanism is required. We also offer models for cleaning the upper, side, and lower parts, allowing for spraying water over the entire inner surface. 【Features】 - Rotates under its own pressure, so no other driving mechanism is required - Usable with a maximum outer diameter of 45mm for small insertion hole diameters - Capable of spraying water over the entire inner surface - Models for cleaning the upper, side, and lower parts are also available *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Other cleaning machines
• Spray Cleaner

This product is a rotating sprinkler nozzle capable of spraying water over the entire inner surface area. It sprays water by self-pressurized rotation using a set of four EX6 type units. Since it rotates under its own pressure, no additional drive mechanism is required. Its compact and lightweight design makes it easy to handle, and it can be used for cleaning various tower tanks and the inner walls of containers. 【Features】 - Compact and lightweight for easy handling - Rotates under its own pressure, eliminating the need for additional drive mechanisms - Capable of spraying water over the entire inner surface area - Sprays water through self-pressurized rotation using a set of four EX6 type units *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Other cleaning machines
• Spray Cleaner

This product is a spray nozzle of the rotating cleaning machine type that can be used for warm water cleaning and solvent cleaning. It features a self-rotating mechanism powered by cleaning liquid pressure, allowing for high-efficiency cleaning throughout the entire tank. Since it is a low to medium pressure cleaning machine, a high-pressure pump is not required. We also offer the "JWM-40 TYPE," so please contact us if you are interested. 【Features】 ■ High-efficiency cleaning throughout the entire tank ■ No high-pressure pump required as it is a low to medium pressure cleaning machine ■ Usable for warm water cleaning and solvent cleaning ■ High cost performance ■ Suitable for labor-saving cleaning operations and cleanup *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Other cleaning machines
• Spray Cleaner

This product is a fog jet circular full coverage spray nozzle capable of wide-area spraying. It can spray in a circular pattern using a combination of seven EX4 type nozzles, allowing for a high flow rate despite the small particle size. It can be used for cooling the atmosphere in various tower tanks and containers, container cleaning, dust collection, dust removal, dust prevention equipment, and disaster prevention equipment. 【Features】 - Small particle size but capable of high flow rate - Capable of wide-area spraying *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Other cleaning machines

This product is a spray nozzle that can be used with small insertion hole diameters of 50cm and 80cm. There are models for full interior surfaces, upper parts, and lower parts, allowing for wide-area watering. It can be used for cleaning the inner walls of various tower tanks and containers, as well as for chemical cleaning of the inner surfaces of reaction vessels and polymerization vessels, and for cleaning the inner walls of lining tanks. 【Features】 ■ Usable with small insertion hole diameters of 50cm and 80cm ■ Models available for full interior surfaces, upper parts, and lower parts ■ Capable of wide-area watering *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Other cleaning machines
• Piping parts

This product is a spiral structure ring-type spray nozzle. It has no internal blades, preventing clogging. Additionally, the particles are slightly smaller than those of the "EX4 type." Our company aims to create people and products with high technology and reliable support, constantly striving for the creation of fresh technologies. 【Features】 ■ No internal blades, preventing clogging ■ Particles are slightly smaller than those of the "EX4 type" *For more details, please refer to the PDF materials or feel free to contact us.

• nozzle
• Spray tower
• Piping parts

This product is a low-flow type "EX6 model" spray nozzle that sprays water flatly due to its special outlet shape. It can be disassembled into the nozzle tip, body, cap, and strainer. There are various performance nozzle tips available for both water flow rate and spray angle. It provides stable spraying across a wide range of pressure levels. 【Features】 ■ Can be disassembled into nozzle tip, body, cap, and strainer ■ Only the nozzle tip can be replaced ■ Various performance nozzle tips are available for both water flow rate and spray angle ■ Stable spraying across a wide range of pressure levels *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Piping parts

This product is a spray nozzle that disperses water in an ultra-wide flat pattern due to its special outlet shape. It provides stable water distribution across a wide range of pressure levels. The impact is stronger than that of the "FN type." Our company aims to create people and products with high technology and reliable support, constantly striving for the creation of fresh technologies. 【Features】 ■ Stable water distribution across a wide range of pressure levels ■ Impact is stronger than that of the "FN type" *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Piping parts

This product is a spray nozzle that directs liquid from the nozzle orifice onto a deflector to distribute water in an ultra-wide flat pattern. Since the water is sprayed by an external deflector, the impact is weaker than that of the "EX6 model," and the particles are smaller. It is suitable for watering in low-pressure areas. 【Features】 ■ No internal blades, preventing clogging ■ Watering is achieved through an external deflector ■ Weaker impact and smaller particles compared to the "EX6 model" ■ Ideal for watering in low-pressure areas *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Piping parts

This product is a narrow-angle flat spray nozzle that provides stable spraying over a wide range of pressure. It sprays at a narrow angle of 30° at 0.2 MPa. There are no internal vanes, preventing clogging. 【Features】 - No internal vanes, preventing clogging - Strong impact with coarse particles - Sprays at a narrow angle of 30° at 0.2 MPa - Stable spraying over a wide range of pressure *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Piping parts

This product is a spray nozzle that sprays water in a narrow angle flat pattern due to its special outlet shape and the absence of internal blades. It provides stable water distribution across a wide range of pressure levels. The lack of internal blades prevents clogging. At 0.2 MPa, it sprays in a narrow angle flat pattern of 60°, and as the pressure increases, the angle widens. 【Features】 - No internal blades, preventing clogging - Strong impact with coarse particles - At 0.2 MPa, it sprays in a narrow angle flat pattern of 60°, and the angle widens as the pressure increases - Stable water distribution across a wide range of pressure levels *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Piping parts

This product is a spray nozzle that distributes water in a wide-angle flat pattern due to its special outlet shape and the absence of internal blades. At 0.2 MPa, it sprays water in a 120° wide-angle flat pattern, and as the pressure increases, the angle widens. There are no internal blades, preventing clogging. 【Features】 - No internal blades, preventing clogging - Strong impact with coarse particles - At 0.2 MPa, it sprays water in a 120° wide-angle flat pattern, and as the pressure increases, the angle widens - Stable spraying across a wide range of pressure *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Piping parts

This product is a spray nozzle that distributes water flatly due to its special outlet shape and the absence of internal blades. It provides stable water distribution across a wide range of pressure levels. At 0.2 MPa, it sprays water flatly at a 90° angle, and as the pressure increases, the angle widens. We offer a variety of options from low flow to high flow. 【Features】 - No internal blades to prevent clogging - Strong impact with coarse particles - At 0.2 MPa, it sprays water flatly at a 90° angle, and the angle widens as the pressure increases - Stable water distribution across a wide range of pressure levels - Various options available from low flow to high flow *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Piping parts

This product is a spray nozzle that sprays a small amount of liquid using hydraulic pressure. Thanks to our unique blades and internal structure, it sprays in a ring shape. To ensure that the spraying is done solely by hydraulic pressure, the particles of this type are minimized. 【Features】 ■ Sprays a small amount of liquid using hydraulic pressure ■ Sprays solely by hydraulic pressure ■ Our unique blades and internal structure *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• nozzle
• Piping parts

This product is a spray nozzle that disperses water in a wide-angle circular pattern with a spiral structure. It can be used for cleaning air, gas, etc., as well as in wastewater treatment facilities such as sludge incineration and wastewater disposal facilities. There are no blades inside, preventing clogging. 【Features】 - No blades inside, preventing clogging - Particles are slightly smaller than those of the "EX4 type" *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Spray tower
• Piping parts

This product is a spray nozzle that distributes water evenly over a rectangular area, thanks to our patented internal vanes and special outlet shape. It enables stable water distribution across a wide range of pressure levels. The impact is slightly stronger than that of the "EX2-SQ type." Our company aims to create people and products with high technology and reliable support, constantly striving for the creation of fresh technologies. 【Features】 ■ Stable water distribution across a wide range of pressure levels ■ Impact is slightly stronger than that of the "EX2-SQ type" *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Spray tower
• Piping parts

This product is an EX2-SQ TYPE wide-angle square full coverage spray nozzle suitable for watering in low-pressure areas. Thanks to our patented internal blades and special outlet shape, it sprays water over a wide-angle square area. It can be used for wastewater treatment facilities and various cleaning devices, including defoaming. 【Features】 ■ Suitable for watering in low-pressure areas ■ Impact is slightly weaker than the "EX2 type" ■ Particles are coarse *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Spray tower
• Piping parts

This product is a coreless round full coverage spray nozzle of the EX4-HN TYPE, which has no internal blades or similar components, preventing clogging. Thanks to its unique internal structure without blades, it sprays water evenly in a circular pattern. It has a wide range of usable pressure and, although it produces coarse particles, the impact is soft. 【Features】 - No internal blades or similar components, preventing clogging - Simple structure for easy handling - Wide range of usable pressure - Coarse particles but with a soft impact *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Spray tower
• Piping parts

This product is a spray nozzle that distributes water evenly across a circular area thanks to our patented internal blades. It can be used for various applications, including dust removal, dust collection, exhaust gas treatment equipment, as well as cooling and absorption of smoke and exhaust gases, and various pollution prevention devices. Our company aims to create people and products with high technology and reliable support, constantly striving for the creation of fresh technologies. 【Features】 ■ Evenly distributes water across the entire surface ■ Particles are slightly smaller than those of the "EX2 type" *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Piping parts
• Spray tower

This product is a spray nozzle that distributes water evenly over a circular area thanks to our patented internal blades. The impact is slightly stronger than the "EX2 type," and the particles are slightly smaller. We offer a variety of options ranging from low flow to high flow. It can be used for various applications such as dust removal, dust collection, exhaust gas treatment equipment, continuous casting equipment, and cooling and cleaning of steel and steel plates. 【Features】 ■ Uniform water distribution over the entire area ■ Impact is slightly stronger than the "EX2 type" ■ Particles are slightly smaller than the "EX2 type" ■ Various options available from low flow to high flow *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Piping parts
• Spray tower

This product is a spray nozzle that disperses water over an ultra-wide circular area thanks to our patented internal blades. It can be used for various pollution prevention devices, including smoke and exhaust gas cooling and absorption, as well as for degassing in seawater desalination systems. It disperses water over an ultra-wide circular area of 120° at 0.2 MPa. The angle becomes narrower in high-pressure ranges. 【Features】 ■ Uniform water dispersion over the entire area ■ Ultra-wide circular area of 120° at 0.2 MPa ■ Coarse particles *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• spray
• Spray tower

This product is a spray nozzle that waters over a super wide-angle circular area thanks to our patented internal blades. It waters over a super wide-angle circular area of 120° at 0.2MPa. The angle becomes narrower in high-pressure ranges. We offer a variety of options from low flow to high flow. 【Features】 ■ Waters uniformly over the entire area ■ Waters over a super wide-angle circular area of 120° at 0.2MPa ■ Various options available from low flow to high flow *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Spray tower
• Piping parts