カワタテック List of Products and Services

The "TV Series" is a machining chuck suitable for processing a large number of small parts. It has a precision of within 0.03mm for gripping after shaping the jaws. Additionally, the handle position is at the front, allowing for no interference with the table, and multiple chucks can be used in parallel. 【Features】 ■ Dust cover prevents cutting chips from entering ■ The body is slim, with a low center of gravity for processing large items ■ Precision of within 0.03mm for gripping after shaping the jaws ■ By removing the cover, it is possible to grip long items using the inner diameter ■ Using a rechargeable drill driver (approximately 9.6V to 12V with torque adjustment) allows for optimal tightening *For more details, please refer to the PDF document or feel free to contact us.

• Chuck
• Vice Clamps
• Processing Jig

The "TM Series" is a chuck used for mounting on tables of lathes, machining centers, and 5-axis machining machines. Designed to be lightweight and slim, it has minimal impact on the machine's maximum load capacity and height. Additionally, it has a cover on the top, making it difficult for chips to enter the interior. 【Features】 ■ Slimmer and lighter compared to standard chucks ■ Suitable for milling and drilling operations in vertical and horizontal machining ■ Increases productivity in vertical lathes ■ Well-suited for use in 5-axis machining ■ TM300 and TM400 ensure large through-holes *For more details, please refer to the PDF document or feel free to contact us.

• Chuck
• Processing Jig

The "TI Series" is a chuck suitable for drilling and milling operations on flanges and similar components using vertical and horizontal machining centers. Due to its lightweight and slim design, it allows for the processing of larger and taller workpieces. It has been developed to maximize the use of Z-axis stroke limitations and maximum load capacity. 【Features】 ■ Suitable for use with 5-axis machining centers ■ Short tool movement distance, reducing processing time ■ Lightweight and slim ■ Capable of processing large and tall workpieces *For more details, please refer to the PDF document or feel free to contact us.

• Chuck
• Processing Jig

The "Y Series" is a machining chuck suitable for clamping fixtures in machining centers. The handle position is at the front, allowing for no interference with the table, and multiple chucks can be used in parallel. The jaws are shaped for gripping, providing high precision within 0.03mm. 【Features】 ■ The handle position is at the front, with no interference with the table ■ Multiple chucks can be used in parallel ■ Dust cover prevents cutting debris from entering ■ The body is slim, with a low center of gravity for processing large items ■ The cover can be removed to utilize the inner diameter for gripping long items *For more details, please refer to the PDF document or feel free to contact us.

• Chuck
• Vice Clamps
• Processing Jig

The "FDV type" allows for three-sided machining at once with a single installation, making it an economical vice index. Due to the rotational indexing, chip evacuation is excellent. The "FDV-164" comes standard with soft jaws, and during machining, the soft jaws are self-cut to securely hold the workpiece, ensuring high precision. 【Features】 ■ Allows for three-sided machining at once with a single installation, economical ■ Excellent chip evacuation due to rotational indexing ■ Soft jaws included as standard. During machining, the soft jaws are self-cut to securely hold the workpiece, ensuring high precision (FDV-164) ■ Manual unit included as standard *For more details, please refer to the PDF document or feel free to contact us.

• Processing Jig
• Other processing machines

This product is a pallet changer that automatically exchanges two independent pallets. Each pallet can be used in various ways, such as process division, separate part processing, and dedicated pallets for urgent items. With a compact design of approximately 2250mm in width, access for tool changes and jig adjustments is possible from the front door. 【Features】 ■ Separate jigs for each pallet, enabling a flexible production system tailored to demand ■ By swapping pallets for each jig, the time for jig changes can be reduced ■ The shuttle type can accommodate fast exchange times for mass production processing ■ Large opening doors allow for smooth jig changes and replacement of heavy workpieces ■ Ceiling crane usage is possible ■ Automatic pallet exchange with M code *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

This is an introduction to the "6-Jaw Floating Chuck" that we handle. It clamps materials with low roundness as they are, achieving high roundness after processing. It is equipped with a floating function suitable for ring processing, featuring a 12-jaw floating design with a balance beam claw. We offer the FLC series and FCH series. 【Features of the FLC Series】 ■ Long jaw stroke of 86mm (diameter) ■ Centrifugal force correction function ■ Comes with a cover for chip prevention suitable for use on vertical lathes *For more details, please refer to the PDF document or feel free to contact us.

• Chuck

This is an introduction to the "Stationary Air Chuck" that we handle. It is suitable for flange processing on vertical machining centers, with large sizes ranging from φ460 to φ600. The chuck features a built-in air cylinder with a slim design. The standard accessories include raw jaws, and we offer three models in our lineup. 【Lineup】 ■ASM 460 ■ASM 500 ■ASM 600 *For more details, please refer to the PDF document or feel free to contact us.

• Chuck

This is an introduction to the "Power Wrench/Power Wrench Chuck" that we handle. The pinion of the scroll chuck is automatically tightened using a hydraulic power wrench device instead of manually. It can be added as a special specification to all of our scroll chucks. The power wrench operates through two hydraulic systems, and the rotation of the wrench is performed by a hydraulic motor. 【Especially effective machines】 ■ Machines with pallet changer specifications or 5-axis machines where it is difficult to obtain a hydraulic source ■ Use in machines processing workpieces that require large through holes ■ Automation systems where hydraulic chucks cannot be used due to the requirement for long stroke lengths *For more details, please refer to the PDF materials or feel free to contact us.

• Chuck
• Spanners and wrenches

We would like to introduce the "Scroll Chuck" that we handle. The standard type of the 3-jaw scroll chuck with integrated jaws and flange is manufactured based on JIS standards. It comes with one set each of heat-treated inner and outer jaws, and the main body is made of cast material. In addition, we also offer the "Standard Type for Both Soft and Hard Jaws with Flange," as well as "4-Jaw Scroll Chucks" and "6-Jaw Scroll Chucks." 【Product Lineup】 ■ 3-Jaw Scroll Chuck with Integrated Jaws and Standard Flange ■ 3-Jaw Scroll Chuck for Both Soft and Hard Jaws with Standard Flange ■ 4-Jaw Scroll Chuck for Both Soft and Hard Jaws with Standard Flange ■ 6-Jaw Scroll Chuck for Both Soft and Hard Jaws with Standard Flange ■ 3-Jaw Scroll Chuck for Both Soft and Hard Jaws with Short Taper Direct Mount *For more details, please refer to the PDF document or feel free to contact us.

• Chuck

We would like to introduce the "Independent Chuck" that we handle. The standard flange type features a safety design using tapped holes for fixture attachment, and the main body is made of cast iron. It is a commonly used chuck that has been around for a long time. After attaching the back plate, it is mounted on the spindle end of the lathe. In addition, we also offer "Short Taper Direct Mount Type," "Steel Type," and "Large Independent Chucks." 【Lineup】 ■ Independent Chuck Standard Flange Type ■ Independent Chuck Short Taper Direct Mount Type ■ Large Independent Chuck ■ Independent Chuck Steel Type ■ Independent Chuck with Cover *For more details, please refer to the PDF materials or feel free to contact us.

• Chuck

The "Genius" features a new ultra-hard claw, reducing the height of the gripping section to 3.5mm. The unique shape of the ultra-hard claw exerts a downward force on the workpiece, providing excellent clamping power even with minimal gripping area. Since the gripping position is away from the table and the claws are significantly chamfered, it is less likely for the spindle or tool to interfere with the table or vice, allowing closer access to the workpiece. Without the need for a riser or increased claw height as in conventional designs, it maximizes the performance of 5-axis machining. 【Features】 ■ Height of the gripping section reduced to 3.5mm with the adoption of ultra-hard claws ■ High-position clamping allows the spindle to approach the workpiece ■ Powerful clamping of 40kN with upper tightening screws ■ Excellent operability due to the unique parallel shaft structure ■ High-precision clamping achieved with lower screws and thrust rings ■ Optional claws accommodate various types of workpieces *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools
• Vice Clamps