サブシステムズ List of Products and Services

【Overview】 ◎ USB 3.2 Gen 2 (10Gbps) / Gen 1 (5Gbps) / USB 2 (High-Speed 480Mbps, Full-Speed 12Mbps) ◎ DP Alt (DisplayPort Alternate) compatible: Maximum DP 1.4 four-lane transmission of 8.1Gbps x 4 = up to 32.4Gbps video transmission ◎ Compliant with USB PD 3.0 (Power Delivery) ◎ Up to 15m optical hybrid cable USB Type-C male host unit and Type-C male device unit ◎ Example of use - Connect the Type-C upstream port (DP Alt, USB PD compatible) of the monitor's embedded USB hub to the USB Type-C port (DP Alt, USB PD compatible) of a laptop to display video at 4K 60P or higher. - At this time, power can be supplied from the monitor to the laptop or from the laptop to the monitor. The receiving side does not require a power adapter. - USB 3.2 Gen 2/Gen 1/USB 2 devices can be used with the Type-A downstream port of the monitor's embedded USB hub.

• cable
• LAN/Optical cable
• LAN construction and wiring work

【Overview】 ◎ IP Universal Transceiver ◎ Compatible with mixed use of HDMI, DVI, and VGA signals * Supports HDMI at 3840x2160@30, HDCP 2.2 compliant ◎ Supports USB HID (keyboard, mouse) and USB 2.0 devices (storage, printer, barcode reader, etc.) ◎ Compatible with mixed use of CAT6 and fiber optic ◎ Source extension, switching, and video wall functionality ◎ Intuitive OSD for source switching operation * Hotkey switching is also available ◎ Ability to pull from other sources and push own source to other displays ◎ EDID capture function ◎ Video wall settings via web interface 【Notes】 a L2 switch must support jumbo frames of 8K or higher and IGMP-compliant gigabit Ethernet. b POE models are also available. Please consult us. c SFP modules can use commercially available products (procured by the user).

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ 4K30P 4x4 Seamless Matrix Switcher (Switching speed below 40ms) ◎ Video wall function ◎ Multi-view function ◎ OSD settings via front panel and remote control. RS232 control. Simple web browser configuration. ◎ Numerous templates included as standard ◎ Dual-layer video structure, and customizable output display area and input cropping area.

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ HDMI KVM over IP extender (100m to 120m one-hop using CAT5e/CAT6 cable, extendable using L2 switch) ◎ HDMI KVM over IP matrix switch (remote PC low-latency switching via L2 switch, hotkey operation possible) ◎ Compatible with USB HID (keyboard, mouse), USB 2.0/1.1 devices (storage, printer, barcode reader, etc.) ◎ EDID capture, graphic/video mode switching, anti-dithering adjustment ◎ 3840x2160@30, HDCP compliant 【Notes】 a. Use an L2 switch that supports 8K jumbo frames and IGMP-enabled gigabit Ethernet b. The factory setting is multicast c. Can be used in conjunction with DVI-131 (DVI model) and VGA-131 (VGA model) transmitters and receivers (total of up to 16 transmitters)

• Other PCs and OA equipment
• Projector
• Other cable related products

◎ Extension of up to 300m with <Type A> MPO for even-numbered fibers (6, 8, 10, 12 ... 24 fibers) ◎ HDMI 2.1 specification (backward compatible with HDMI 2.0/1.4) Supports 48Gbps, HDCP 2.3, DSC, BT.2020, HDR, eARC, etc. ◎ The connector cable lengths for the transmitter and receiver include 1.8m (standard), as well as 8cm and 6.1m. They can be flexibly combined according to the individual installation environment of the transmitter and receiver. ◎ Digital high-quality and high-fidelity transmission free from EMC noise. Suitable for medical applications. ◎ No setup required (plug and play) Note: USB power supply is required for the receiver only.

• cable
• LAN/Optical cable
• LAN construction and wiring work

【Overview】 ◎ DP1.2 / USB2.0 / RS232 / IR over IP extender ◎ Supports 3840x2160@60, HDCP2.3 ◎ When using CAT5e / CAT6 cables, one-hop extension up to 100m, further extension possible using L2 switch ◎ Up to 20Km extension when using commercially available SFP ◎ One-to-one communication via DIP switch settings ◎ Compatible with USB HID (keyboard, mouse), USB2.0 devices (storage, printer, barcode reader, etc.) ◎ Supports LPCM / DTS / Dolby / Dolby Atmos audio ◎ Automatic EDID acquisition Note: Use a Gigabit Ethernet L2 switch that supports jumbo frames 【Included Items】 a DP140TX Transmitter 1 b DP140RX Receiver 1 c Power adapter (12V / 2A) 2 d DP1.2 cable (1.2m) 1 e USB2.0 Type-B to Type-A cable (1.2m) 1 f IR emitter / receiver 1

• Other PCs and OA equipment
• Other cable related products
• Touch Panel

【Overview】 ◎ HDMI and USB over IP extender and distributor USB HID (keyboard, mouse), USB 2.0 devices (storage, printer, barcode reader, etc.) are supported. ◎ Audio input/output, bidirectional RS232, and unidirectional IR support. ◎ With CAT6 cable, one-hop distance of 125m, and can be further extended using a gigabit Ethernet switch (jumbo frame support not required). ◎ Fiber optic use is possible (standard is 1LC MMF for 2km or 1LC SMF for 20km. Can be changed to 2LC, 1SC, etc. by replacing the SFP module). ◎ Supports 3840x2160@30, HDCP compliant. ◎ EDID capture is possible. ◎ Compatible with 9DU (DVI model) and transmitter/receiver.

• Other PCs and OA equipment
• Projector
• Other cable related products

**Overview** ◎ DVI and USB over IP extender and distributor Supports USB HID (keyboard, mouse) and USB 2.0 devices (storage, printer, barcode reader, etc.) ◎ Audio input/output, bidirectional RS232, unidirectional IR support ◎ With CAT6 cable, one-hop distance of 125m, further extension possible with gigabit Ethernet switch (jumbo frame support not required) ◎ Fiber optic use available (standard is 1LC MMF for 2km or 1LC SMF for 20km. Can be changed to 2LC, 1SC, etc. by replacing SFP module.) ◎ Active signal resolution and refresh rate are 3840x2160@30, HDCP compliant. Embedded audio is also supported. ◎ EDID capture capability ◎ Compatible with 9HU (HDMI model) transceivers * Same internal structure as 9HU

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ HDMI over IP one-to-many extender distributor (When using CAT6 cable: one hop 140m, CAT5e cable: same 120m) ◎ Radial connection using L2 Gigabit switch, and monitor extension with daisy chain receiver (HELR-4K) ◎ 3840x2160@30, HDCP compliant ◎ Supports 7.1 channel LPCM (192KHz) ◎ EDID capture function ◎ Daisy chain receiver (HELR-4K) supports up to 250 monitors, with a maximum distance of 2.5km 【Note】 The maximum data rate is 850Mbps, so use a Gigabit Ethernet L2 switch (jumbo frame support is not required)

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ VGA KVM over IP extender (100m to 120m one-hop using CAT5e/CAT6 cable, extendable using L2 switch) ◎ VGA KVM over IP matrix switch (low-latency switching of remote PCs via L2 switch, hotkey operation available) ◎ Compatible with USB HID (keyboard, mouse), USB 2.0/1.1 devices (storage, printer, barcode reader, etc.) ◎ EDID capture, graphic/video mode switching, anti-dithering adjustment ◎ Supports 1920x1080@60, 1080p60 【Notes】 a. Use an L2 switch that supports 8K jumbo frames and IGMP-enabled gigabit Ethernet. b. The factory setting is multicast. c. DVI-131 (DVI version) and HDMI-131 (HDMI version) transmitters and receivers can be used together (total of up to 16 transmitters).

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ DVI KVM over IP extender (100m to 120m one-hop using CAT5e/CAT6 cables, extendable using L2 switch) ◎ DVI KVM over IP matrix switch (low-latency switching of remote PCs via L2 switch, hotkey operation available) ◎ Compatible with USB HID (keyboard, mouse), USB 2.0/1.1 devices (storage, printer, barcode reader, etc.) ◎ EDID capture, graphic/video mode switching, anti-aliasing adjustment ◎ 1920x1080@60, 1080p60, HDCP compliant 【Notes】 a. Use an L2 switch that supports 8K jumbo frames and IGMP-enabled gigabit Ethernet. b. The factory setting is multicast. c. Can be used in conjunction with VGA-131 (VGA version) and HDMI-131 (HDMI version) transmitters and receivers (total of up to 16 transmitters).

• Other PCs and OA equipment
• Projector
• Other cable related products

**Overview** ◎ Ideal for HDMI 2.1 extension, integrated transmitter-receiver unit cable ◎ Composed of HDMI transmitter-receiver units at both ends and a hybrid cable of optical fiber (FRL: Fixed Rate Link) and copper wire ◎ Extends any resolution output (8K30P 4:4:4, 12-bit color depth, 48Gbps) from AV devices, PCs, etc., up to 100m without the need for setup or power ◎ Slim and lightweight for easy handling, resistant to external electromagnetic noise, and easy to lay out ◎ Compliant with HDMI 2.1 full specifications, supporting HDCP 2.3, eARC, and HEC **Key Points** • HDMI 2.1 48Gbps compatible (backward compatible with HDMI 2.0/HDMI 1.4) • DSC (Display Stream Compression): Supports high resolution (10K) and high refresh rate (120Hz) compression • Supports dynamic HDR, eARC, VRR, QFT, QMS, ALLM • No power or setup required • Slim diameter (4.9mm), lightweight (25g/m) • Easy to lay out (minimum bending radius of the cable: short-term 2cm, long-term 7cm)

• cable
• LAN/Optical cable
• LAN construction and wiring work

◎ Ideal detachable cable for HDMI 2.1 extension ◎ Both ends of the cable have HDMI Type D (Micro HDMI) connectors. End dimensions: 9.3mm (width) x 29mm (length). Easy pre-wiring in conduits. ◎ Standard HDMI Type A to HDMI Type D (Micro HDMI) adapter included. ◎ Hybrid structure cable with optical fiber and copper wire. ◎ Extends any resolution output (8K30P 4:4:4, 12-bit color depth, 48Gbps) from AV devices, PCs, etc., up to 100m without the need for settings or power. ◎ Slim diameter (4.9mm) and lightweight (25g/m) for easy handling of the cable. ◎ Resistant to external electromagnetic noise and easy to install (minimum bending radius: short-term 2cm, long-term 7cm). ◎ Compliant with HDMI 2.1 full specifications, supporting HDCP 2.3, eARC, and HEC. ◎ DSC (Display Stream Compression): Supports high resolution (10K) and high refresh rate (120Hz) compression. ◎ Supports Dynamic HDR, eARC, VRR, QFT, QMS, and ALLM.

• cable
• LAN/Optical cable
• LAN construction and wiring work

**Overview** ◎ Ideal integrated cable for HDMI 2.1 extension ◎ Composed of HDMI transmitter and receiver units at both ends, and a hybrid cable of optical fiber (FRL: Fixed Rate Link) and copper wire ◎ Extends any resolution output (48Gbps) from AV devices, PCs, etc., up to 100m without the need for setup or power ◎ Compliant with HDMI 2.1 full specifications, supporting HDCP 2.3, eARC, and HEC ◎ Robust (stainless steel tube/TPU structure) ◎ Comes with connector protector **Key Points** • Supports HDMI 2.1 48Gbps (backward compatible with HDMI 2.0/HDMI 1.4) • DSC: Supports high resolution (10K) and high refresh rate (120Hz) compression • Supports Dynamic HDR, eARC, VRR, QFT, QMS, ALLM • No power or setup required • Diameter 5.9mm, weight 60g/m • Compression strength 200kg (short and long term) • Minimum bending radius of the cable: short term 2cm, long term 7cm • Tensile strength (connector joint): short term 20kg, long term 8kg

• cable
• LAN/Optical cable
• LAN construction and wiring work

◎ Extension of up to 300m with Type A MPO for even-numbered fibers (6, 8, 10, 12 ... 24 fibers) ◎ DP1.4 specification Supports 32.4Gbps (HBR3), HDCP2.3, DSC, BT.2020, HDR, MST, etc. ◎ No power supply required ◎ The connector cable length for the transmitter and receiver is available in 1.8m (standard), as well as 8cm and 6.1m. Can be flexibly combined according to the individual installation environment of the transmitter and receiver. ◎ Digital high-quality and high-fidelity transmission free from EMC noise. Suitable for medical applications. ◎ No setup required (plug and play)

• cable
• LAN/Optical cable
• LAN construction and wiring work

**Overview** ◎ Ideal integrated cable with DP1.4 transmission and reception units ◎ Composed of DP1.4 transmission and reception units at both ends, and a hybrid cable of optical fiber and copper wire ◎ Supports 32.4Gbps, HBR3, HDCP2.2/1.4 ◎ Compatible with DSC (Display Stream Compression) HDR ◎ No power supply or configuration required for extension up to 100m ◎ Slim diameter (4.9mm) and lightweight (25g/m) for easy handling of the cable ◎ Resistant to external electromagnetic noise and easy to install (minimum bending radius of the cable: short-term 2cm, long-term 7cm)

• cable
• LAN/Optical cable
• LAN construction and wiring work

◎ Supports DP1.2, USB2.0, and DPCP (DisplayPort Content Protection) ◎ Extends uncompressed DP1.2 signals of 4096x2160@60Hz up to 200m using a single 12-core MPO MMF (50/125 μm, Type-A) ◎ 4-port USB2.0 hub function (can connect general USB devices including keyboard, mouse, and web camera) ◎ Complete hardware solution with plug & play ◎ Noise-free extension using optical cable Note: MPO cables are also available (AUFO series) https://www.subsystems.jp/optical-cable/mpo/

• Other PCs and OA equipment
• Projector
• Other cable related products

◎ VGA KVM, Audio, RS232 Extender (using CAT5e/CAT6 cable 1920x1200@60, 300m) ◎ Operation or settings via hotkeys and intuitive OSD ◎ Image quality adjustment features (RGB skew, brightness, sharpness) ◎ Ability to switch between TX (transmitter) connected PC and RX (receiver) connected PC on the RX side (from RX front switch or hotkey) ◎ TX EDID settings (using EDID from RX or TX connected monitor) (from OSD or hotkey on RX) ◎ Control of RX connected console (ON/OFF/View Only) (from front switch or hotkey on TX) ◎ TX and TX side PC, RX and RX side PC are connected via USB or PS2 ◎ TX and TX side KM (Keyboard, Mouse), RX and RX side KM are connected via USB ◎ Highly flexible audio control ◎ RS232 settings (from OSD) ◎ Plug and play (no driver installation required) ◎ Firmware upgradeable

• Industrial PCs
• Embedded Board Computers
• LAN construction and wiring work

◎ VGA KVM extender (uses CAT5e/CAT6 cable, 1920x1200@60, 300m) ◎ Operation or settings via hotkeys and intuitive OSD ◎ Image quality adjustment features (RGB skew, brightness, sharpness) ◎ Ability to switch between TX (transmitter) connected PC and RX (receiver) connected PC on the RX side (via RX front switch or hotkeys) ◎ TX EDID settings (using EDID from RX or TX connected monitor) (accessible via OSD or hotkeys on RX) ◎ Control of RX connected console (ON/OFF/View Only) (via front switch or hotkeys on TX) ◎ TX and TX side PC, RX and RX side PC connect via USB or PS2 ◎ TX and TX side KM (keyboard, mouse), RX and RX side KM connect via USB ◎ Highly flexible audio control ◎ Plug and play (no driver installation required) ◎ Firmware upgradeable

• Industrial PCs
• Embedded Board Computers
• LAN construction and wiring work

**Overview** ◎ VGA/KVM over IP Extender and Splitter USB HID (keyboard, mouse) compatible * USB 2.0 devices (storage, printer, barcode reader, etc.) not supported ◎ Supports 1920x1080@60, audio input/output ◎ When using CAT6 cable, one-hop distance of 200m; further extension possible with gigabit Ethernet switch (jumbo frame support not required) Note: In a one-to-many configuration, keyboard and mouse connections are allowed only on one receiver. Other receivers cannot connect to the device and can only receive video and audio.

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ VGA audio optical extender ◎ Standard extension of 500m with 1LC MMF or 20km with 1LC SMF ◎ Can be changed to 2LC, 1SC, etc. by replacing the SFP module ◎ Supports up to 1920x1080@60 ◎ Compact and lightweight

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ A hybrid optical cable that extends USB3.2 Gen2 (10Gbps)/Gen1 (5Gbps)/USB2 High-Speed (480Mbps) up to 50m. ◎ USB Type-C male host unit and Type-C male device unit. ◎ The cable features a hybrid structure of optical fiber and copper wire. ◎ No setup or power supply required. ◎ Diameter 4.8mm, weight 26g/m, easy to lay (minimum bending radius of 4cm when permanently installed). Note 1: Not compatible with USB PD (Power Delivery) and DP Alt. Note 2: Host usage port: USB3.2 Gen2/Gen1. Usable devices: USB3.2 Gen2/Gen1/USB2 High-Speed. Note 3: Use with self-powered devices.

• cable
• LAN/Optical cable
• LAN construction and wiring work

【Overview】 ◎ A hybrid optical cable that extends USB 3.2 Gen 2 (10Gbps) / Gen 1 (5Gbps) / USB 2 High-Speed (480Mbps) up to 50m. ◎ USB Type-A male host unit and Type-C male device unit. ◎ The cable features a hybrid structure of optical fiber and copper wire. ◎ No setup or power supply required. ◎ Diameter: 4.8mm, weight: 26g/m, easy to lay (minimum bending radius of 4cm when permanently installed). Note 1: Not compatible with USB PD (Power Delivery) and DP Alt. Note 2: Host usage port: USB 3.2 Gen 2 / Gen 1 Compatible devices: USB 3.2 Gen 2 / Gen 1 / USB 2 High-Speed. Note 3: Use with self-powered devices.

• cable
• LAN/Optical cable
• LAN construction and wiring work

【Overview】 ◎ A hybrid optical cable that extends USB3.2 Gen2 (10Gbps)/Gen1 (5Gbps)/USB2 High-Speed (480Mbps) up to 50m. ◎ USB Type-A male host unit and Type-A female device unit. ◎ The cable features a hybrid structure of optical fiber and copper wire. ◎ No setup or power supply required. ◎ Slim diameter (4.2mm), lightweight (20g/m), easy to install (minimum bend radius of 4cm for permanent installation). Note 1: Does not support USB PD (Power Delivery) and DP Alt. Note 2: Host port used: USB3.2 Gen2/Gen1 Compatible devices: USB3.2 Gen2/Gen1/USB2 High-Speed. Note 3: Option: USB power supply cable for the device side (maximum supply current 2A).

• cable
• LAN/Optical cable
• LAN construction and wiring work

【Overview】 ◎ USB3.2 Gen2 (10Gbps) / Gen1 (5Gbps) / USB2 (High-Speed 480Mbps, Full-Speed 12Mbps) ◎ DP Alt (DisplayPort Alternate) compatible: DP1.4 two-lane transmission, 8.1Gbps x 2 = 16.2Gbps video transmission ◎ USB PD (Power Delivery) compatible: up to 60W/3A ◎ Up to 10m optical hybrid cable USB Type-C male host unit and Type-C female device unit ◎ Example of use - Connect the Type-C upstream port (DP Alt, USB PD compatible) of the monitor's embedded USB hub to the USB Type-C port (DP Alt, USB PD compatible) of a laptop to display 4K30P video. - At this time, power can be supplied from the monitor to the laptop or from the laptop to the monitor. The receiving side does not require a power adapter. - Use USB3.2 Gen2/Gen1/USB2 devices with the Type-A downstream port of the monitor's embedded USB hub.

• cable
• LAN/Optical cable
• LAN construction and wiring work

【Overview】 ◎ A transmission and reception unit integrated cable that extends DP Alt (DisplayPort Alternate Mode) up to 30m. ◎ Composed of USB Type-C DP1.2 transmission and reception units at both ends, and a hybrid cable of optical fiber and copper wire. ◎ Supports 21.6Gbps, HBR2, HDCP, and 4K60P. ◎ No power supply or configuration required. ◎ Diameter of 4.9mm, weight (25g/m). ◎ Easy to install (minimum bending radius of the cable: short-term 2cm, long-term 7cm).

• cable
• LAN/Optical cable
• LAN construction and wiring work

【Overview】 ◎ DP Alt (DisplayPort Alternate Mode) to HDMI extension conversion cable (up to 50m) ◎ Composed of a USB Type-C DP1.2 input transmitting unit, HDMI2.0 output receiving unit, and a hybrid cable of optical fiber and copper wire. ◎ DP Alt input 21.6Gbps: 4K60P 10bit, signal input up to 21.38Gbps. HDMI2.0 output 18Gbps: 4K60P 8bit, signal output up to 17.82Gbps. ◎ No power supply required, no setup needed. ◎ Diameter 4.9mm, weight (25g/m). ◎ Easy to install (minimum bending radius of the cable: short-term 2cm, long-term 7cm).

• cable
• LAN/Optical cable
• LAN construction and wiring work

【Overview】 ◎ Extends USB 3.0 (5Gbps) up to 100m between host and device using CAT6a (HDBaseT) ◎ Supports all USB transfer modes (Isochronous, Control, Bulk, Interrupt) ◎ Compatible with USB 3.0/2.0/1.1/1.0 for both host and device ◎ Four device connection ports available USB cameras, USB storage, USB docking stations, USB hubs, USB touch panels, etc. can be used ◎ Plug and play (no driver installation required) ◎ RS232 extension support ◎ Comes with mounting kit (for wall, rack, DIN rail) 【Notes】 1. DisplayLink support 2. Does not support DisplayPort Alternate 3. Does not support Power Delivery or Quick Charge 4. Use CAT6a or higher cables

• Other PCs and OA equipment
• Other cable related products
• Touch Panel

**Overview** ◎ Extends the connection between host and device up to 300m using 2LC MMF at USB3.0 (5Gbps) 1. Devices can use USB3.0/2.0/1.1 2. Host uses USB3.0 port 3. SMF model is also available (extension distance remains the same) ◎ Devices can be powered by bus power or self-power Example: USB memory, USB hub, USB storage, USB touch panel, USB camera, Kinect, etc. ◎ There are two device connection ports ◎ Plug and play (no driver installation required) ◎ Compact and lightweight ◎ Power lock mechanism ◎ Compliance standards FCC, CE, RoHS

• Other PCs and OA equipment
• Other cable related products
• Touch Panel

**Overview** ◎ Extend between host and device up to 350m using 2LC MMF at USB3.0 (5Gbps) 1. Both host and device are dedicated to USB3.0 No backward compatibility with USB2.0/1.1 2. SMF model is also available (extension distance remains the same) ◎ Devices can be used with both bus power and self power Examples: USB memory, USB hub, USB storage, USB touch panel, USB camera, Kinect, etc. ◎ Plug and play (no driver installation required) ◎ Compact and lightweight ◎ Power lock mechanism ◎ Compliance standards FCC, CE, RoHS

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ USB 2.0 Optical Extender Compatible with keyboards, mice, and USB devices (storage, printers, barcode readers, etc.) ◎ Standard is 1LC MMF for 2km or 1LC SMF for 20km. Can be changed to 2LC, 1SC, RJ45, etc. by replacing the SFP module. ◎ No driver installation required, plug-and-play hardware solution.

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ USB 2.0 Extender Compatible with keyboards, mice, and USB devices (storage, printers, barcode readers, etc.) ◎ One-hop distance of 150m with CAT6 cable. Further extension possible with gigabit Ethernet switches and powered Ethernet repeaters. ◎ No driver installation required, plug-and-play hardware solution.

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ Ideal for HDMI 2.0 extension with an integrated transmitter and receiver unit cable ◎ Hybrid structure cable with HDMI transmitter and receiver units at both ends, using optical fiber and copper wire ◎ Extends any resolution output from AV devices, PCs, etc. (supports 4K 60P 4:4:4) up to 100m without the need for settings or power ◎ Slim and lightweight for easy handling. Resistant to external electromagnetic noise and easy to install. ◎ Compliant with HDMI 2.0 full specifications, supporting CEC, ARC, and HEC 【Key Points】 • HDMI 2.0 cable (4K 60P 4:4:4, deep color, HDCP, CEC, ARC, HEC compatible, up to 100m) • Optical-electric hybrid cable with integrated transmitter and receiver units • No settings required (plug-and-play hardware solution) • No power required • Slim diameter (4.9mm), lightweight (25g/m) • Easy to install (minimum bending radius of the cable: short-term 2cm, long-term 7cm)

• cable
• LAN/Optical cable
• LAN construction and wiring work

◎ Ideal detachable cable for HDMI 2.0 extension ◎ Both ends of the cable have HDMI Type D (Micro HDMI) connectors. End dimensions: 9.3mm (width) x 29mm (length). Easy pre-wiring in conduits. ◎ Standard HDMI Type A to HDMI Type D (Micro HDMI) adapter included. ◎ Hybrid structure cable with optical fiber and copper wire. ◎ Allows arbitrary resolution output (supports 4K 60P 4:4:4) from AV devices, PCs, etc., with no setup required (plug and play) and no power needed, extending up to 100m. ◎ Slim diameter (4.9mm) and lightweight (25g/m), making cable handling easy. ◎ Resistant to external electromagnetic noise and easy to install (minimum bending radius: short-term 2cm, long-term 7cm). ◎ Compliant with HDMI 2.0 full specifications, supporting HDCP, CEC, ARC, and HEC.

• cable
• LAN/Optical cable
• LAN construction and wiring work

【Overview】 ◎ Ideal for HDMI 2.0 extension, integrated transmission and reception unit cable ◎ Hybrid structure cable with HDMI transmission and reception units at both ends, combining optical fiber and copper wire ◎ Extends any resolution output from AV devices, PCs, etc. (supports 4K60P 4:4:4) up to 100m without the need for settings or power supply ◎ Fully compliant with HDMI 2.0 specifications, supporting CEC, ARC, and HEC ◎ Robust (stainless steel tube/TPU structure) ◎ Comes with connector protector 【Key Points】 • HDMI 2.0 cable (supports 4K60P 4:4:4, deep color, HDCP, CEC, ARC, HEC, up to 100m) • No settings required (plug and play hardware solution) • No power supply needed • Diameter 5.9mm, weight 60g/m • Compression strength 200kg (short and long term) • Minimum bending radius of the cable: short term 2cm, long term 7cm • Tensile strength (at connector joint): short term 20kg, long term 8kg

• cable
• LAN/Optical cable
• LAN construction and wiring work

【Overview】 ◎ A compact and lightweight extender that extends uncompressed 4K HDMI and USB HID over a single 2LC optical fiber. ◎ Available in MMF (50/125μm) for 300m and SMF (9.2/125μm) for 3km. Note: Please consult us for longer distances. ◎ Maximum resolution of 3840x2160@30Hz. ◎ 2-port USB HID for keyboard and mouse applications. ◎ Display EDID capture settings available. ◎ Plug & play hardware solution. ◎ Noise-free extension using optical cables.

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ DVI dual link signal extender (supports DVI embedded audio, not HDCP compliant) ◎ Extends uncompressed DVI dual link signals at 2560x1600@60Hz up to 500m using a single 12-core MPO MMF (50/125 μm or 62.5/125 μm, Type-A) ◎ EDID learning function (one-push) and default EDID ◎ Complete hardware solution with plug and play ◎ Noise-free transmission using optical cables ◎ Compact and lightweight dongle type

• Other PCs and OA equipment
• Projector
• Other cable related products

【Overview】 ◎ DVI single link signal extender (supports DVI embedded audio, not HDCP compliant) ◎ Extends uncompressed DVI single link signals up to 1920x1200@60Hz using a single 2LC optical fiber (up to 1,500m with 9/125 μm SMF, up to 500m with 50/125 μm MMF) ◎ EDID learning function (one-push) and default EDID ◎ Complete hardware solution with plug & play ◎ Noise-free transmission using optical cables ◎ Compact and lightweight dongle type

• Other PCs and OA equipment
• Projector
• Other cable related products