日立技研 List of Products and Services

There are times when marking correction areas and verbal explanations do not effectively convey the message, and just searching for the correction locations can lead to a loss of time. The correction support terminal "Neoview Rework" displays the locations judged as defective during visual inspection using a cross cursor on the overall image of the circuit board, and it also enlarges the defective areas. This not only eliminates the possibility of missing corrections but also significantly reduces the time spent searching for defective areas. "Neoview Rework" not only displays the correction locations but also allows for the input of the results after corrections. Furthermore, if a re-inspection is conducted with Neoview after corrections, images of the corrected areas can be captured, ensuring a thorough record of the correction process. 【Features】 ■ Supports accurate correction work without omissions ■ No need for correction markings on the circuit board ■ Stores history and images of corrections as data ■ If re-inspected with Neoview after corrections, all correction results are centrally managed as electronic data *For more details, please refer to the PDF materials or feel free to contact us.

• Defect Inspection Equipment
• Other image-related equipment
• Other inspection equipment and devices

When introducing a visual inspection device, it is usually necessary to have one inspector per device. The direct inspection rates and the time required for inspecting a single item vary depending on the inspection line and model. The "Multi-Control System" (patented) was developed with the idea of reducing inspectors' waiting time and distributing the workload. By allowing one inspector to conduct visual inspections across multiple inspection lines without being assigned to a specific line, it is expected to improve the work efficiency of inspectors and reduce labor costs. The "Multi-Control System" conducts inspections using remote terminals, so there is no need to be in front of the inspection machine. Inspections can be performed in real-time via remote control. 【Features】 ■ Increases work efficiency and reduces labor costs ■ Displays defective areas detected by the visual inspection device in video format, allowing the camera to be adjusted to a more visible angle during inspection ■ When focusing on areas other than defects detected by AOI, photos are taken when the board flows from AOI to Neoview, and inspections are conducted based on those images *For more details, please refer to the PDF document or feel free to contact us.

• Defect Inspection Equipment
• Remote Control
• Other security and surveillance systems

The "NVS400DL" is one of the "Neoview series" that uses a unique dual-camera system to inspect delicate defects from above and at an angle, recording all inspection images. The external inspection device automatically displays the locations where defects are detected, allowing inspectors to simply judge the areas shown on the screen. No complicated operations are required. It is equipped with a shooting condition setting function. For each defect item, you can pre-set whether to capture images with the upper or angled camera, as well as the camera's rotation angle and lighting brightness, minimizing camera operation and leading to reduced inspection time. Additionally, by utilizing the accumulated inspection results, you can quickly identify opportunities for quality improvement. 【Features】 ■ Displays defect locations without omission, preventing oversight ■ Traceability assurance with image-based inspection data *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Defect Inspection Equipment

The "NVS500DM" is one of the "Neoview series" that utilizes a unique dual-camera system to inspect delicate defects from both above and at an angle, recording all inspection images. The exterior inspection device automatically displays the areas where defects are detected, allowing inspectors to simply make judgments based on what is shown on the screen. No complicated operations are required. It is equipped with a shooting condition setting function. For each defect item, you can pre-set whether to capture images with the top or angled camera, as well as the camera rotation angle and lighting brightness, minimizing camera operation and leading to reduced inspection time. Additionally, by utilizing the accumulated inspection results, you can quickly identify opportunities for quality improvement. 【Features】 ■ Displays defect locations without omission, preventing oversight ■ Ensures traceability with image-based inspection data *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Defect Inspection Equipment

The "NVS400DM" features a unique dual-camera system that allows for flexible inspection of even the most delicate defects from above and at an angle, and it records all inspection images as part of the "Neoview series." The exterior inspection device automatically displays the areas where defects are detected, so inspectors only need to make judgments based on what is shown on the screen. No complicated operations are required. It is equipped with a shooting condition setting function. For each defect item, you can pre-set whether to capture images with the top or angled camera, as well as the camera's rotation angle and lighting brightness, minimizing camera operation and leading to reduced inspection time. Additionally, by utilizing the accumulated inspection results, you can quickly identify opportunities for quality improvement. 【Features】 ■ Displays defective areas without omission, preventing oversight ■ Ensures traceability with image-based inspection data *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Defect Inspection Equipment

The "NVS500LL2" features a unique dual-camera system that allows for flexible inspection of delicate defects from above and at an angle, and it records all inspection images as part of the "Neoview series." The external inspection device automatically displays the areas where defects were detected, allowing inspectors to simply make judgments based on what appears on the screen. No complicated operations are required. It is equipped with a shooting condition setting function. For each defect item, you can pre-set whether to capture images with the top or angled camera, as well as the camera's rotation angle and lighting brightness, minimizing camera operation and leading to reduced inspection time. Additionally, by utilizing accumulated inspection results, you can quickly identify opportunities for quality improvement. 【Features】 ■ Displays defect locations without omission, preventing oversight ■ Guarantees traceability with image-based inspection data ■ Multi-control function (optional) to increase inspection efficiency with fewer inspectors *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Defect Inspection Equipment

The "NVS400LL2" features a unique dual-camera system that allows for flexible inspection of delicate defects from above and at an angle, recording all inspection images as part of the "Neoview series." The appearance inspection device automatically displays the locations where defects are detected, so inspectors only need to make judgments based on what is shown on the screen. No complicated operations are required. It is equipped with a shooting condition setting function. For each defect item, you can pre-set whether to capture images with the top or angled camera, as well as the camera's rotation angle and lighting brightness, minimizing camera operation and leading to reduced inspection time. Additionally, utilizing the accumulated inspection results can quickly reveal opportunities for quality improvement. 【Features】 ■ Displays defect locations without omission, preventing oversight ■ Traceability assurance with image-based inspection data ■ Multi-control function (optional) to increase inspection efficiency with fewer inspectors *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices
• Defect Inspection Equipment

Standard model of tabletop visual inspection device! The 'NVS500LM2' utilizes a unique double-camera system to inspect delicate defects from above and at an angle, recording all inspection images as part of the "Neoview series." The appearance inspection device automatically displays the areas where defects are detected, allowing inspectors to simply judge the areas shown on the screen. No complicated operations are required. Equipped with a shooting condition setting function. For each defect item, you can pre-set whether to capture images with the upper or angled camera, as well as the camera rotation angle and lighting brightness, minimizing camera operation and leading to reduced inspection time. Additionally, by utilizing the accumulated inspection results, you can quickly identify opportunities for quality improvement. 【Features】 ■ Displays defect locations without omission, preventing oversight ■ Traceability assurance with image-based inspection data ■ Multi-control function (optional) to improve inspection efficiency with fewer inspectors *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices
• Defect Inspection Equipment

Standard model of tabletop visual inspection device! The 'NVS400LM2' utilizes a unique double camera system to inspect delicate defects from above and at an angle, recording all inspection images as part of the "Neoview series." The device automatically displays the areas where defects are detected, allowing inspectors to simply make judgments based on what appears on the screen. No complicated operations are required. Equipped with a shooting condition setting function. For each defect item, you can pre-set whether to capture images with the top or angled camera, as well as the camera rotation angle and lighting brightness, minimizing camera adjustments and leading to reduced inspection time. Additionally, by utilizing accumulated inspection results, you can quickly identify opportunities for quality improvement. 【Features】 ■ Displays defect locations without omission, preventing oversight ■ Traceability assurance with image-based inspection data ■ Multi-control function (optional) to increase inspection efficiency with fewer inspectors *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Defect Inspection Equipment

"Neoview" is a visual inspection support device equipped with a unique high-quality image engine. It is now possible to provide beautiful PCB inspection images without whiteout, even for solder surfaces that are difficult to see due to reflections at certain angles, thanks to the high-quality engine. Inspections can be conducted more accurately with images that are close to natural. 【Features】 ■ Equipped with a unique high-quality image engine ■ 5-megapixel camera (4K) ■ Capable of providing beautiful PCB inspection images without whiteout ■ More accurate inspections can be performed with images that are close to natural *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices

The "Neoview series" utilizes a unique double camera system to inspect delicate defects from various angles, recording all inspection images. By leveraging the accumulated inspection results, you can quickly identify opportunities for quality improvement. It also features a unique "automatic angle adjustment function." By setting how the camera operates automatically for each defect item, images are displayed at the appropriate camera angle according to the nature of the defects, reducing the need for manual camera adjustments. 【Features】 ■ Displays defect locations without omission, preventing oversight ■ Ensures traceability with image-based inspection data ■ Multi-control function (optional) to enhance inspection efficiency with fewer inspectors *For more details, please download the PDF or contact us.

• Other inspection equipment and devices