サンエイ List of Products and Services

We would like to introduce a case of our company manufacturing a "sloped conveyor for transporting plastic materials." This conveyor is based on the Beltor BS, and since the materials being transported are small, it is equipped with side walls to prevent spillage from the sides of the belt. Additionally, a stainless steel hopper is installed at the feeding section, and an under cover with a discharge opening is placed on the bottom. A pull cord emergency stop switch has been installed to ensure the safety of surrounding workers. 【Features】 ■ Conveyor for feeding plastic materials to a crusher ■ Equipped with side walls to prevent spillage from the sides of the belt ■ Stainless steel hopper installed at the feeding section ■ Under cover with a discharge opening installed on the bottom ■ Pull cord emergency stop switch installed for safety *For more details, please download the PDF or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "Fan-equipped U-shaped Slat Conveyor" as a conveyor for transporting die-cast products. The workpieces are thin, so the conveying surface is designed to be level with the conveyor frame to allow detection by sensors. Additionally, while there may be larger gaps between the slats compared to L-shaped slats, we have designed it to minimize gaps as much as possible. 【Features】 ■ Conveyor for transporting die-cast products ■ Air cooling by a fan on the conveyor ■ Designed to have the conveying surface level with the conveyor frame ■ Designed to minimize gaps as much as possible *For more details, please download the PDF or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "Home Appliance Recycling Product Transport Inclined Conveyor." This conveyor uses a belt with a surface pattern and operates at an angle of 18 degrees, equipped with an under cover with an inspection port and an intermediate dust chute. Additionally, for large conveyors like this one, we conduct a trial assembly and operation using a pit in the factory before shipping. 【Features】 ■ Conveyor for feeding home appliance recycling products into a crusher ■ Uses a belt with a surface pattern ■ Operates at an angle of 18 degrees ■ Equipped with an under cover with an inspection port and an intermediate dust chute *For more details, please download the PDF or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a fully covered "steep incline black rubber belt conveyor." Since the conveyed material is in powder form, we produced the SFLX in a fully covered specification to minimize scattering to the surroundings, and we also added a belt scraper to reduce workpiece adhesion to the underside of the belt. Additionally, our factory has a pit, allowing for trial runs to be conducted before shipping, even with tall conveyors. 【Features】 ■ SFLX manufactured in a fully covered specification ■ Added a belt scraper to reduce workpiece adhesion to the underside of the belt *For more details, please download the PDF or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured an "aluminum frame inclined conveyor" with a hopper. It is equipped with a large stainless steel hopper (approximately 70L) and side guides, allowing for the cutting and transportation of items fed into the hopper. Additionally, the horizontal bars attached to the belt enable transportation at a 45° incline. 【Features】 ■ Equipped with a large stainless steel hopper (approximately 70L) and side guides ■ Cuts and transports items fed into the hopper ■ Capable of 45° inclined transportation *For more details, please download the PDF or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "low-profile scraper." Due to the short press legs and lack of space with the floor, it was produced with a conveyor frame height of 130H and special dimensions. For transporting thin sheet metal scraps, the adoption of a scraper-type conveyor is more effective compared to other methods such as hinges and belt conveyors. 【Features】 ■ Short press legs with no space between the floor ■ Manufactured with a conveyor frame height of 130H and special dimensions *For more details, please download the PDF or feel free to contact us.

• Conveyor

We would like to introduce a case study of our "heat-resistant belt conveyor" that we manufactured. This conveyor was made for transporting aluminum die-cast products. It features a non-woven fabric belt that can withstand temperatures of up to 250°C, ensuring both protection against scratches on the transported items and heat resistance. San-Ei manufactures the "best" conveyor that fits perfectly in our customers' workplaces. 【Features】 ■ Conveyor for transporting aluminum die-cast products ■ Uses a non-woven fabric belt with a heat resistance of 250°C ■ Balances protection against scratches and heat resistance *For more details, please download the PDF or feel free to contact us.

• Conveyor

The "SMG" is a magnetic conveyor that uses magnetic force to attract and transport workpieces, allowing it to accommodate various shapes of workpieces. Since there is no contact between movable parts like chains and the workpieces, it operates with low noise, and the moving parts are not exposed, making it safer to use. The flat design of the transport surface allows for easy cleaning. Furthermore, the load on the chain itself during transport is minimal, resulting in less wear on components and easy maintenance. 【Features】 ■ Transport by magnetic force ■ Low noise and high safety ■ Easy to clean and low maintenance ■ Minimal jamming *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

"AJCY" is a stainless steel frame conveyor designed for transporting food and pharmaceuticals. It features anti-shrink, antibacterial, and mold-resistant specifications, allowing for washing with water. It also employs a latch-type leg, making belt replacement and cleaning easy. In addition, our company offers a variety of conveyors, so please feel free to contact us. 【Features】 ■ Washable with water ■ Anti-shrink, antibacterial, and mold-resistant specifications ■ Easy belt replacement and cleaning *For more details, please refer to the catalog or feel free to contact us.

• Conveyor

"SFLX" is a new type of black rubber sidewall conveyor. It excels in various situations that require inclined transportation, such as discharging from crushers and processing machines, and feeding into bulk bags or downstream machinery. It has greater durability compared to resin belts of the same specifications. The accordion (bellows) structure of the sidewalls, made from the same material as the belt, serves as a conveyor guide, ensuring the reliable transport of small and numerous items. 【Features】 ■ New standard for inclined transportation ■ Greater durability compared to resin belts of the same specifications ■ Reliable transport of small and numerous items ■ The belt itself serves as a guide, preventing scratches from friction ■ Customization for various surfaces according to the transported items *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

The "SHK" is a shaking conveyor that transports items by sliding them through a repeated back-and-forth motion with varying speeds. It has a small number of parts, a simple structure that makes maintenance easy, and can secure a large transport volume due to its wide effective width. Since the transport surface is made of a continuous material, there is no risk of items getting caught in chains or belt breaks. Various customizations are possible, including width, length, and motor position, so please feel free to inquire. 【Features】 ■ Few parts ■ Simple structure for easy maintenance ■ Transport surface made of a continuous material ■ No risk of items getting caught in chains or belt breaks ■ Various customizations possible, including width, length, and motor position *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

We would like to introduce our "Scrap Conveyors." The "Scraper SCLH" is designed with a low height to be installed on the floor. Additionally, the "Scraper SCLV" is suitable for the main line of scrap collection within factories. Furthermore, the black rubber sidewall conveyor "SFLX" features sidewalls made of the same material as the belt, with an accordion structure on both sides that serves as a conveyor guide, ensuring reliable transport of small and numerous items. 【Features】 < Scraper SCLH > ■ Horizontal circulation type - standard model ■ Designed with a low height for floor installation < Scraper SCLV > ■ Vertical circulation type - standard model ■ Capable of transporting large volumes *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

We manufactured a "press scrap conveyor" for automotive parts based on a large SCLV with a frame width of 1000mm. The conveyor was installed inside a pit dug in the factory building, extending through the wall to transport scrap to an external scrap box, creating a layout that facilitates this process. Additionally, the installation site was a factory in the Tohoku region, where we also carried out installation work, including on-site welding. 【Features】 ■ Manufactured based on a large SCLV with a frame width of 1000mm ■ Installed the conveyor inside a pit dug in the factory building ■ Layout designed to transport scrap to an external scrap box ■ Completed installation work, including on-site welding *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "conveyor for press scrap." It is a scraper type with a width of 800W and a total length of 40M, making it a large product. San-Ei manufactures the "best" conveyor that perfectly fits our customers' sites. 【Features】 ■ Utilizes a pit ■ Scraper type ■ Width 800W *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a mini vertical "conveyor for press scrap" at our company. The conveyor transports materials from two presses and one punch press. Depending on the workpiece, it can also transport materials from machines other than presses. San-Ei manufactures the "best" conveyor that fits perfectly to our customers' sites. 【Features】 ■ Special curved design (floor) ■ Scraper type ■ Capable of transporting materials from machines other than presses depending on the workpiece *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "conveyor for press scrap." This line is used to transport scrap after pressing and punching through four conveyors to an outdoor collection area. San-Ei manufactures the "best" conveyor that fits perfectly to our customers' sites. 【Features】 ■ Scraper type ■ A line that transports scrap after pressing and punching through four conveyors to an outdoor collection area *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a medium-sized hinge-type "conveyor for press scrap." It is used as a feeding conveyor for a crusher. The conveyed material is industrial waste. San-Ei manufactures the "best" conveyor that fits perfectly to our customers' sites. 【Features】 ■ Used as a feeding conveyor for a crusher ■ Conveyed material is industrial waste *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured an "aluminum die-cast product transport conveyor" with a cooling fan. We made it possible to transport forged products, which are difficult to convey with a standard resin belt, using a stainless steel mesh belt. Furthermore, since it is a mesh belt with a chain, there is no concern about wandering. San-Ei manufactures the "best" conveyor that fits perfectly to our customers' sites. [Features] - Capable of transporting forged products that are difficult to convey with a standard resin belt using a stainless steel mesh belt. - No concern about wandering since it is a mesh belt with a chain. *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured an "Aluminum Die-Cast Product Transport Conveyor." This product is an upgraded version of the slat-type conveyor "STE Series," capable of accommodating wide and long dimensions due to the use of large conveyor chains. In this case, it was manufactured with a width of 1 meter and a length of 28 meters. San-Ei manufactures the "best" conveyor that fits perfectly in our customers' workplaces. 【Features】 - Upgraded version of the slat-type conveyor "STE Series" - Accommodates wide and long dimensions using large conveyor chains - Manufactured with a width of 1 meter and a length of 28 meters *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "two-tier conveyor for product transport." This is a two-tier configuration with a PX2 type mounted on a PY2 type conveyor using dedicated legs. It also comes with a work table, making it suitable for use in assembly lines and similar applications. San-Ei manufactures conveyors that are "best" and perfectly fit for our customers' sites. 【Features】 ■ Equipped with a work table ■ Usable for assembly lines and more *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "Conveyor for Product Transport - Inclined Conveyor." It transports workpieces from a low position to a high position. Due to the side wall design, it is also capable of transporting small items and spherical objects. San-Ei manufactures conveyors that are a perfect fit for our customers' sites, providing the "best" solutions. 【Features】 ■ Transports workpieces from a low position to a high position ■ Capable of transporting small items and spherical objects due to the side wall design *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "steel frame conveyor." Two conveyors are secured with special legs. The ejected parts are discharged through the gaps of the mold. San-Ei manufactures the "best" conveyor that fits perfectly in our customers' workplaces. 【Features】 ■ Two conveyors secured with special legs ■ Ejected parts discharged through the gaps of the mold *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "steel frame conveyor." The SWS type can accommodate a variety of belts, so we use belts with crossbars (protrusions). It is also capable of inclined transportation. San-Ei manufactures the "best" conveyor that fits perfectly in your workplace. 【Features】 ■ The SWS type can accommodate a variety of belts, so we use belts with crossbars (protrusions). ■ Inclined transportation is also possible. *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "steel frame conveyor." By applying MC nylon in four directions, we prevent product impact, and by adding a stopper, we can stock the products. The width, length, and guides can be adjusted flexibly. San-Ei manufactures the "best" conveyor that fits perfectly to our customers' sites. 【Features】 ■ Prevents product impact by applying MC nylon in four directions ■ Stocks products by adding a stopper ■ Length and guides can be adjusted flexibly *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "food transport conveyor." Due to the inclusion of a table, it is used for bento assembly and food-related production lines. The table is also made of stainless steel, allowing for thorough washing. San-Ei manufactures conveyors that are a perfect fit and the "best" for our customers' sites. 【Features】 - Includes a table, making it suitable for bento assembly and food-related production lines - The table is also made of stainless steel, allowing for thorough washing *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case of manufacturing a "forged product transport inclined slat conveyor." Since this was an update of an existing line, there were constraints on layout dimensions, and we carried out design and manufacturing to exact specifications. The incline angle is 60°, and the lift height is approximately 2800H. We also added a conveyor transport surface and an under cover, and manufactured a chute at the input section using wear-resistant steel plates. It is sized between L Slat STE80 and L Slat STE50. 【Overview】 ■ Model name: L Slat STE60 ■ Incline angle: 60°, lift height: approximately 2800H ■ Added conveyor transport surface and under cover ■ Manufactured a chute at the input section using wear-resistant steel plates ■ Size is between L Slat STE80 and L Slat STE50 *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "High-Temperature Material Handling Chain Multi-Line Conveyor" at San-Ei Co., Ltd. This conveyor is designed to transport hot forged products by arranging chains and placing the workpieces on top for transportation. It is completely custom-made. If you have any inquiries regarding conveyors, please feel free to contact us. 【Overview】 ■Model Name: Special S ■Transports hot forged products ■Arranges chains and places workpieces on top for transportation *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "Plastic Modular Belt Inclined Conveyor." The plastic modular belt is made by combining resin parts that resemble a caterpillar, allowing for the replacement of only the damaged sections in the event of breakage. While the initial cost is higher compared to conveyors using conventional resin belts, there is a significant advantage in that repair costs are considerably lower. [Overview] ■ Model Name: Plastic Modular Belt Inclined Conveyor ■ A belt made by combining resin parts that resemble a caterpillar ■ In the event of breakage, only the damaged sections can be replaced ■ Advantage: Repair costs are significantly reduced *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "scrap conveyor (scraper)" used in the motor core press lamination line in China at San-Ei. We constructed the line by combining the floor-type SCLH and the vertical-type SCLV. At the end of the conveyor, two scrap boxes can be placed, allowing for switching to the other box once one is full. 【Overview】 ■ Model names: SCLH, SCLV ■ Used in the motor core press lamination line in China ■ Two scrap boxes can be placed at the end of the conveyor, allowing for switching to the other box once one is full *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "vertical conveyor for PET bottle caps." It is based on a vertical stainless steel conveyor JBZ with a lift height of approximately 4500H. The model name is "Special BJZ-20-115-415-90-90°." If you have any inquiries regarding conveyors, please feel free to contact us. 【Overview】 ■ Model Name: Special BJZ-20-115-415-90-90° ■ Purpose: Vertical transport of PET bottle caps ■ Base: Vertical stainless steel conveyor JBZ ■ Lift Height: Approximately 4500H *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "Vertical Stainless Steel Frame Conveyor." This conveyor was designed for the vertical transport of citrus fruits such as oranges, with a lift height of approximately 2000H. It is based on the vertical stainless steel conveyor JBZM. If you have any inquiries regarding conveyors, please feel free to contact us. 【Overview】 ■Model Name: Special JBZM-20-100-225-100 ■Purpose: Vertical transport of citrus fruits such as oranges ■Base: Vertical stainless steel conveyor JBZM ■Lift height: Approximately 2000H *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "conveyor for transporting wood chips." We handled the transportation line from the wood chipper to the pit for storing the chips. We carry out the design, manufacturing, and installation of the product itself in a consistent manner. If you have any inquiries regarding the conveyor, please feel free to contact us. 【Overview】 ■Model Name: Tokushu S ■Consistent implementation of design, manufacturing, and installation of the product itself *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "conveyor for feeding rubber shredders." This conveyor is designed to feed shredded rubber tires into a shredder for further processing, and we also manufactured the lower cover and conveyor legs. If you have any inquiries regarding the conveyor, please feel free to contact us. 【Overview】 ■Model Name: Special SMB2TA-40-1460T (14.6M) ■Lower cover and conveyor legs also manufactured *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case study from San-Ei Corporation. This was developed and designed as a thin product with a frame height of 130H for a rubber block crusher's feeding conveyor. If you have any inquiries regarding conveyors, please feel free to contact us. 【Overview】 ■Model Name: Special SWSA-50-7.0M ■Developed and designed as a thin product with a frame height of 130H *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "Furecon Input & Cutting Conveyor." In this case, since it was necessary to transport industrial chemicals and wash the conveyor with water, we produced it in an all-stainless, waterproof specification. As the materials to be transported are batch processed and loaded in large quantities at once, we added a cutting conveyor before the inclined transport conveyor to achieve quantitative transportation. 【Overview】 ■ Model Name: Special BJZ-38-160-182-70-60°/Special J-100-60-G ■ Produced in an all-stainless, waterproof specification due to the need to transport industrial chemicals and wash the conveyor with water. ■ Added a cutting conveyor before the inclined transport conveyor as the materials are batch processed and loaded in large quantities at once. *For more details, please refer to the related links or feel free to contact us.

• Conveyor

At San-Ei, we would like to introduce a case of the "Side Wall Belt Type Inclined Conveyor" that we manufactured. The wavy side rails on both sides of the belt serve as conveyor guides, preventing issues such as items getting caught in the guide gaps. If you have any inquiries regarding conveyors, please feel free to contact us. 【Overview】 ■ Model Name: Special BSZA-40-178-214-70-45° ■ Wavy side rails on both sides of the belt serve as conveyor guides ■ Suitable for transporting bulk items, small items, bulky items, and powders (depending on conditions) *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where San-Ei Corporation manufactured a "Summer Bobsleigh Transport Conveyor." The conveyor consists of a combination of a resin belt conveyor and a 90° curved section made of a modular belt conveyor. The model name is "Special S." If you have any inquiries regarding the conveyor, please feel free to contact us. 【Overview】 ■ Model Name: Special S ■ The conveyor is composed of a combination of a resin belt conveyor and a 90° curved section made of a modular belt conveyor. *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case of manufacturing a "press blanking material transport conveyor" at San-Ei. This is a discharge conveyor for blanking materials ejected from the press. Since the workpieces are thin, disc-shaped, we selected a belt that is less likely to stick to the transport surface. If you have any inquiries regarding conveyors, please feel free to contact us. 【Overview】 ■Model Name: Special PU2A-40-80-130-30° ■A belt that is less likely to stick to the transport surface was selected due to the thin, disc-shaped workpieces. *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "steel slag conveyor" at our company. It receives the burrs discharged from the deburring machine at the steel mill and transports them to the scrap box. It is embedded in the pit and used there. This is a larger version of the L Slat STE80, with a larger chain size as well. 【Overview】 ■ Model Name: STE5100-L-600-9530-2920-45° ■ Receives burrs discharged from the deburring machine and transports them to the scrap box ■ Embedded in the pit and used there *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case of a "conveyor" for transporting blanking materials discharged from a 2000-ton press at San-Ei. Multiple blanking materials are discharged in a single shot, with a weight of approximately 70 kg, resulting in a product that, while small, has a strong rigidity. If you have any inquiries regarding the conveyor, please feel free to contact us. 【Overview】 ■ Model Name: STE80-Z-500-730-1315-740-1000-45° ■ Transports blanking materials discharged from a 2000-ton press ■ Multiple blanking materials are discharged in a single shot, with a weight of approximately 70 kg *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "conveyor for product stocking." This conveyor is designed to stock cylindrical workpieces, and since the total weight of the workpieces exceeds 100 kg, it has been developed to be compact yet rigid. If you have any inquiries regarding conveyors, please feel free to contact us. 【Overview】 ■Model Name: Special PG3CY-80-180-G ■Stocks cylindrical workpieces on the conveyor ■Compact yet rigid *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We have manufactured a "mesh belt conveyor for transporting die-cast products." The model name is "SCM50-S-60-250." After this, a cooling fan will be installed on the conveyor to perform cooling during transport. If you have any inquiries regarding the conveyor, please feel free to contact us. [Overview] ■Model name: SCM50-S-60-250 ■A cooling fan will be installed on the conveyor to perform cooling during transport. *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case where we manufactured a "stainless steel mesh belt inclined conveyor" at San-Ei. This conveyor was made for loading from a volume reduction machine for foamed resins such as expanded polystyrene to a bulk bag. This time, with the focus on solidifying with water cooling, we designed the frame and motor to be waterproof and constructed it with a SUS mesh belt. If you have any inquiries regarding conveyors, please feel free to contact us. 【Overview】 ■Model Name: Special JCM50-Z-300-600-3000-650-30° ■Washable *For more details, please refer to the related links or feel free to contact us.

• Conveyor

We would like to introduce a case study of our "Vertical Conveyor for Food Transport." This Z-shaped product is designed to transport and elevate "rakkyo" (pickled shallots) and "ginger" using a belt made of urethane resin horizontal and wave side rails, depositing them into the hopper of a computer scale. It is also washable. If you have any inquiries regarding conveyors, please feel free to contact us. 【Overview】 ■ Model Name: Special JBZ-40-120-400-210 ■ Belt: Composed of urethane resin horizontal and wave side rails ■ Transports and elevates rakkyo and ginger to be deposited into the hopper of a computer scale ■ Washable *For more details, please refer to the related links or feel free to contact us.

• Conveyor

At San-Ei, we would like to introduce a case of manufacturing a "food transport conveyor." We have increased the frame strength to accommodate longer lengths. It is washable, and the model name is "JZ2Y-30-600-G." If you have any inquiries regarding the conveyor, please feel free to contact us. 【Overview】 ■ Model Name: JZ2Y-30-600-G ■ Increased frame strength to accommodate longer lengths ■ Washable *For more details, please refer to the related links or feel free to contact us.

• Conveyor