エムエスジェイ創研 List of Products and Services

The "R・D・G GUN_2" is a high-functionality DX measurement device that replaces traditional analog calipers. It features a compact camera laser head, a 10.5-inch tablet PC, and a 1.5m USB cable for easy setup. The device allows for simple image inversion to measure both convex R and concave R. Additionally, it is equipped with three types of software that enable R measurement, gap and step measurement, and arbitrary shape 3D profile measurement. 【Features】 ■ Contributes to efficiency in inspection processes for many products and facilitates the sharing of inspection data. ■ Uses a sharp blue laser with minimal noise. ■ Measurement values are stable due to low speckle. ■ Incorporates three types of software in one device. ■ Allows for easy image inversion to measure both convex R and concave R. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments

The "GLS-3060BU" is a compact, inline non-contact gloss meter that allows for speedy monitoring of production line conditions. It measures the surface gloss of continuously produced printed products, plastic films, stone, tiles, and coatings in real-time without contact, displaying data on changes over time. The measurement data is saved for later detailed evaluation. Additionally, since this product uses an infrared light projection method, the influence of the workpiece's color and pattern is minimized. 【Features】 - Proprietary gloss measurement developed using infrared light brightness histogram method - Equipped with a compact camera head suitable for inline installation - Controller functionality can be selected based on needs - Stable gloss measurement achieved through a unique measurement algorithm - Simultaneous display of gloss values and changes over time *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "GLS-2060" is an inline/online non-contact gloss meter that measures the surface gloss of continuously produced printed products, plastic films, stone materials, tiles, coatings, etc., in real-time and displays temporal change data without contact. It allows for speedy monitoring of the production line's condition. Additionally, the measurement data is saved, enabling detailed evaluation and review later. 【Features】 ■ Proprietary gloss measurement using RGB brightness histogram method ■ Quick monitoring of the production line's condition ■ Measurement data is saved for detailed evaluation and review later ■ Equipped with a newly developed camera head ■ Simultaneous display of gloss values and temporal change values *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "LHS-IV" is a real-time 3D profiler that allows you to observe the cross-sectional shape of a workpiece in real-time while holding it with one hand. By combining a one-axis moving stage and a rotating stage, it easily measures and displays surface shapes and overall shapes. Measurement data can be immediately observed with the K3D Save VIEWER, and can also be saved in CSV format for display in EXCEL or output in ASCII code. 【Features】 ■ Compact and lightweight ■ Handheld operation ■ Real-time profile (cross-sectional shape) ■ 3D scanning ■ Operates with a laptop, compact configuration *For more details, please refer to the related link page or feel free to contact us.

• Other measurement, recording and measuring instruments

The "LGD-700S" is a gap/step/curvature radius measuring device equipped with a compact 5-inch tablet. By lightly turning on the handheld measurement start switch, it automatically measures and displays gaps and steps or curvature radius. The automatic measurement points are displayed on the profile data, and all data is automatically saved. Additionally, it is equipped with standard 3D measurement software, allowing for 3D measurements of arbitrary shapes. We also offer the creation of dedicated measurement software for specific workpieces. 【Features】 ■ Contributes to efficiency in many manufacturing processes ■ Compact and lightweight, with a handheld screen display ■ Equipped with a compact 5-inch tablet for smooth operation on Windows 10 ■ Capable of both gap and curvature radius measurements with a single device ■ Automatically measures and displays gaps and steps or curvature radius *For more details, please refer to the related link page or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Image Checker DST-2500" is a device that monitors the quality of printed materials such as gravure printing, form printing, label printing, and flexo printing, by checking registration marks, halftones, color tones, and barcode defects with high-quality still images. It allows you to save a specified number of images with custom names. You can compare the saved reference images with the current printed images in either a vertical or horizontal split view. Additionally, it can be inverted along the flow direction of the web, reducing constraints on the camera mounting position. 【Features】 ■ Automatic monitoring of registration mark misalignment ■ Displays high-resolution images ■ Storage of reference images ■ Comparison display between saved images and current printed images ■ Profile display on specified lines *For more details, please refer to the related link page or feel free to contact us.

• Image Processing Equipment

The PTC-1040 is a dust camera that allows for easy visualization and observation of fine particles when combined with appropriate lighting. It processes images from a super compact, high-sensitivity, high-resolution black-and-white CCD camera in 10-bit (1024 gradations) high tonal range and performs real-time differential processing. Thanks to the differential image effect, it is now possible to identify scratches and weak contrasts that are usually difficult to distinguish. 【Features】 - Easy visualization and observation of fine particles - Capable of identifying scratches and weak contrasts that are usually hard to distinguish - Lightweight (300g) and easy to carry for observation - Option to select between standard images without differential processing and images with differential processing - Ability to freeze images *For more details, please refer to the related link page or feel free to contact us.

• Monochrome camera

The "Gondola Deck Position Monitoring Device" is compact and lightweight, and is designed to be splash-proof. It continuously monitors the position of the gondola deck used during tunnel ceiling repair work and issues a warning by flashing a patrol light when the gondola deck exceeds a reflective bar placed at the designated position. The control box is designed with safety measures, including a waterproof AC outlet and a leakage breaker. 【Features】 ■ Compact and lightweight ■ Easy installation and connection ■ Simple operation; just turn on the power switch ■ Not affected by the lighting of color cones ■ Not affected by the lights of vehicles passing in open lanes *For more details, please refer to the related link page or feel free to contact us.

• Other security and surveillance systems

The "LGD-800" is a gap/step/curvature R measuring device that contributes to the efficiency of inspection processes for many products, including those in the automotive industry, home appliances, and metal resin products. The camera head can rotate 90°, allowing for flexible adaptation to the measurement direction of the workpiece. By lightly pressing the measurement start switch, gaps and steps or radius R are automatically measured and displayed, with the automatic measurement points shown on the profile data, and all data is automatically saved. Additionally, it is equipped with standard 3D measurement software, enabling 3D measurements of arbitrary shapes. We also conduct various implementations of dedicated measurement software for specific workpieces. 【Features】 ■ Camera head can rotate 90° ■ Flexible adaptation to the measurement direction of the workpiece ■ Equipped with a compact 5-inch tablet ■ Smooth operation with Windows 10 ■ Can measure both gaps and steps, and R with two units *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments
• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

This product is an inline/online non-contact gloss meter (gloss checker). It measures the surface gloss of continuously produced printed products, plastic films, stone, tiles, coatings, etc., in real-time and displays time-series change data without contact. You can quickly monitor the condition of the production line, and since the measurement data is saved, detailed evaluations can be conducted later. 【Features】 - Camera head suitable for inline installation using ultra-high brightness LED light source - Stable gloss measurement enabled by a unique "measurement algorithm" - Real-time digital display of gloss values and time-series graphs on the monitor - Timing control by a dedicated controller allows for periodic data acquisition and storage of all data - Periodic data acquisition synchronized with encoder pulses by a dedicated controller (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments
• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

The image measurement synthesis software "WinScale-S" is an image measurement synthesis software that aims to become the industry standard with its overwhelming low price and high quality. It also features focus synthesis, and the measurement results are displayed in a separate window, providing excellent visibility and ease of management. For more details, please download the catalog.

• Image Processing Software

The eyewear frame selector "Temirror" allows you to easily compare and choose from your preferred four frames using a touch panel. It features a dual-sided monitor system and also enables lens color simulation. For more details, please download the catalog.

• Virtual Reality Related

The real-time digital image enhancer "SS-100" is an image enhancer that can clearly identify and emphasize subtle differences in tone. It can compare two images and distinctly display their differences. Computer communication control via an option is also possible. For more details, please download the catalog.

• Image Processing Equipment
• Other image-related equipment

The video scaler "VS-3" is an image measurement unit equipped with a wealth of video measurement functions. It demonstrates its power in image measurement for observation TV images ranging from micro to macro. It enables various measurements such as distance measurement between two points, perimeter measurement of arbitrary shapes, and distance measurement to the center of a circle. For more details, please download the catalog.

• Other measurement, recording and measuring instruments
• Other image-related equipment

The small metal halide light source device "MH-200" is a light source device that can reproduce natural colors by using a 21W metal halide lamp. It provides brighter visible light than a 100W halogen lamp, allowing for the reproduction of natural colors along with white light at a color temperature of 5800K or higher. For more details, please download the catalog.

• Lighting for image processing

The "HSTD-1000" ultra-high magnification vibration-damping stand is a vibration-damping stand that enables comfortable image observation with its high-rigidity vibration-damping structure. It allows for ultra-high precision adjustments in units of 1μm and is a compact, high-performance stand suitable for various applications, making it an essential tool for microscope observation. For more details, please download the catalog.

• Other microscopes

The Multi-Angle Stand "MSTD-2" is a multi-angle stand with a double XY stage structure. It is an essential tool for microscope observation, allowing for smooth observation from all directions. Thanks to the main and sub double XY stage structure, you can move and rotate the work observation point without shifting the center of the observation screen, enabling rotational observation. For more details, please download the catalog.

• Other microscopes

The image measurement system "WinScale-S System" enables various measurements of still images and moving images, and is a high-quality measurement application software equipped with all essential functions for measurement, including focus image synthesis and image enlargement through cubic function coefficient interpolation. It allows for image measurements such as length, area, angle, and circle measurement in both still images and moving images. For more details, please download the catalog.

• Other image-related equipment

The "MST-80 RM-100" printing still image device monitors the quality of printed materials such as gravure printing, form printing, label printing, and flexographic printing by using a newly developed ultra-compact camera head, without taking up installation space. It provides high-definition still images of registration marks, halftones, color tones, and other aspects of print quality. For more details, please download the catalog.

• Image analysis software
• Other image-related equipment

The gloss checker "MST-80 GC-100" is a non-contact device that measures the surface gloss of continuously produced printed products in real-time and displays temporal change data. It allows for speedy monitoring of the production line's condition. There are two types of gloss value acquisition interval controls available: GC101 and GC102. For more details, please download the catalog.

• Image analysis software
• Other image-related equipment

The image checker "DST-1400XG" is a device that monitors the quality of printed output in gravure printing, form printing, label printing, flexographic printing, etc., by checking registration marks, halftones, color tones, barcode omissions, and more, using high-quality still images. It can compare and display the current printed image with stored reference images in a vertical or horizontal split view. For more details, please download the catalog.

• Image analysis software
• Other image-related equipment

The image checker "DST-1400" is a device that monitors the quality of printed output in gravure printing, form printing, label printing, flexographic printing, etc., by checking registration marks, halftones, color tones, barcode omissions, and more with high-quality still images. It can compare and display the current printed image against stored reference images in a vertical or horizontal split view. For more details, please download the catalog.

• Image analysis software
• Other image-related equipment

The real-time laser 3D digitizer "LHS-3 Duo" is a three-dimensional measurement device that significantly improves blind spots caused by complex shapes by simultaneously capturing laser slit line images with two cameras. The system configuration includes a sensor head, controller, and PC, with an additional rotating stage or I-axis stage. For more details, please download the catalog.

• 3D measuring device

The real-time laser 3D digitizer "LHS-2" is a three-dimensional measuring device that accurately measures and displays the profile of the laser light cutting surface in real-time, while also calculating the shape data of the object with high precision through scanning the cutting surface. With dedicated software, it measures various shape features such as steps and gaps, warping, cross-sectional area, radius, edge, angle, scratches, and sealant bead, among others. For more details, please download the catalog.

• 3D measuring device