電産 List of Products and Services

The "Vegawood DCP-i6000U-35" is a Compact PCI bus board in a 3U8HP size that features an Intel 6th generation processor. It is equipped with two DDR4 SO-DIMM sockets for main memory, allowing for a maximum implementation of 32GB of memory. Additionally, it can accommodate an mSATA SSD for internal storage, and it has one copper Ethernet port and one optical Ethernet port available. 【Features】 ■ Supports Intel 6th generation Skylake-U processors ■ 3U8HP size ■ Capable of implementing up to 32GB of memory ■ Can accommodate an mSATA SSD for internal storage ■ One copper Ethernet port and one optical Ethernet port available *For more details, please refer to the PDF document or feel free to contact us.

• Expansion Boards

The "DXM-5042" is a 4-port gigabit Ethernet XMC module. It uses the Intel I210IT Ethernet controller and supports jumbo frames. The operating temperature ranges from -20 to 70°C, and it is a single-size XMC. All materials used comply with RoHS directives. 【Features】 ■ 4-port gigabit Ethernet ■ Operating temperature -20 to 70°C ■ Uses Intel I210IT for the Ethernet controller ■ Single-size XMC *For more details, please refer to the PDF document or feel free to contact us.

• Embedded Board Computers

The "DXM-5024" is a gigabit Ethernet XMC with a 2-port optical connector specification. It uses the Intel I210IS for the LAN controller and the Diodes PI7C9X2G808PR for the PCI Express switch. Additionally, due to the structural specifications of the XMC, the optical connectors protrude 14.0mm from the front panel. Please be cautious of the space on the front panel side. 【Features】 ■ 2-port optical connector specification gigabit Ethernet ■ Maximum transmission distance of 550m ■ Intel I210IS used for the controller ■ Single-size XMC *For more details, please refer to the PDF materials or feel free to contact us.

• Other embedded systems (software and hardware)

The "DVI-EXT1" is a system unit that can extend DVI and USB 2.0 up to 100 meters. It is used in a set with a transmitter and receiver, connected via LAN cable. The receiver side does not require an external power supply thanks to PoE. Additionally, DVI supports dual displays with a maximum resolution of 1920×1200. It is HDCP compliant and does not require drivers. 【Features】 ■ Maximum resolution of 1920×1200 ■ DVI has 2 input ports and 4 output ports ■ USB 2.0 has 4 ports ■ The receiver side does not require an external power supply due to PoE ■ HDCP compliant ■ No drivers required *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

The "DVE-SH7780A" is a 6U size VME bus board that employs the 32-bit RISC microprocessor SH7780. It features 128MB of DDR-SDRAM for main memory, operating at 160MHz, and includes flash memory (socket, onboard) and RTC. Additionally, the specifications for PMC indicate that the usable size is a single CMC 1 slot, 32-bit, 33MHz, with VIO = 3.3V. 【Features】 ■ 128MB DDR-SDRAM ■ Flash memory (socket, onboard), RTC included ■ Compact Flash slot ×1 ■ USB 2.0 ×2, Serial ×2 ■ PMC slot ×1 ■ 10/100BASE-TX Ethernet ×1 *For more details, please refer to the PDF document or feel free to contact us.

• Expansion Boards

The "DSR-i6000U" is a compact fanless PC designed to meet customer requirements in addition to its basic functions. It is suitable for monitoring connected devices, collecting, storing, and transmitting sensor data, and data extraction. Additionally, it features memory options ranging from 4GB to a maximum of 32GB, as well as RAS functions (temperature, voltage, WDT) and DIN rail compatibility. 【Features】 ■ Equipped with 6 Gigabit Ethernet ports ■ 10 years maintenance-free (optional) ■ Memory from 4GB to a maximum of 32GB ■ RAS functions (temperature, voltage, WDT) ■ DIN rail compatible ■ Customizable expansion IO section *For more details, please refer to the PDF document or feel free to contact us.

• Industrial PCs

The DPM-5041 is a 4-port gigabit Ethernet PMC. It uses the Intel I210IT Ethernet controller and supports jumbo frames. Additionally, the operating temperature ranges from -20 to 70°C. It is a single-size PMC and features LINK/ACT LEDs on the panel. 【Features】 ■ 4-port gigabit Ethernet ■ Operating temperature -20 to 70°C ■ Uses Intel I210IT Ethernet controller ■ Single-size PMC *For more details, please refer to the PDF document or feel free to contact us.

• Embedded Board Computers

The "Dogwood DVE-T2080-50" is a 6U size VME bus board equipped with NXP's QorIQ T2080. It features 2GB of ECC-enabled DDR3L-SDRAM as main memory and includes a 128-bit SIMD vector processing engine, AltiVec. Additionally, it supports PMC/XMC, NOR Flash, MRAM, and RTC, with an operating temperature range of -40 to 85°C. 【Features】 ■ 128-bit SIMD vector processing engine AltiVec included ■ ECC-enabled DDR3L-SDRAM 2GB ■ PMC/XMC support available ■ NOR Flash, MRAM, RTC included ■ Operating temperature -40 to 85°C ■ Expansion possible via Rear I/O *For more details, please refer to the PDF document or feel free to contact us.

• Expansion Boards

The "DCP-P2020" is a CompactPCI bus board that features a central resource function and is used by being mounted in a system slot. It operates the NXP QorIQ P2020 at a core clock of 1GHz, with main memory consisting of DDR3 SDRAM, operating at a clock speed of 400MHz, and a memory capacity of 2GB. Additionally, it is equipped with 128MB of flash memory that can be used for IPL and applications, as well as 512KB of backupable SRAM. 【Features】 ■ Equipped with a central resource function for CompactPCI, used by being mounted in a system slot ■ Operates the NXP QorIQ P2020 at a core clock of 1GHz ■ Main memory consists of DDR3 SDRAM, operating at a clock speed of 400MHz, with a memory capacity of 2GB ■ Equipped with 128MB of flash memory that can be used for IPL and applications *For more details, please refer to the PDF document or feel free to contact us.

• Expansion Boards

The "DCP-7120" is a 16-bit D/A conversion board with 4 channels of analog output that can be set for voltage output or current output. The output range can be independently set for each channel via software, and simultaneous output for all channels is possible. Monitoring of the output status for all 4 channels is also possible. Additionally, all operations can be configured via software, and the output is in high impedance when powered on across all ranges. 【Features】 ■ Output range can be independently set for each channel via software ■ Simultaneous output for all channels is possible ■ Monitoring of the output status for all 4 channels is possible ■ All operations can be configured via software ■ Output is in high impedance when powered on across all ranges *For more details, please refer to the PDF documentation or feel free to contact us.

• Embedded Board Computers

The "DCP-7020" is a 16-bit A/D conversion board that complies with the CompactPCI bus in a 3U single-slot size, capable of voltage/current input. It features 16 single-ended channels and 8 differential channels, with the input range configurable for 8 voltage input ranges and 1 current input range. Additionally, the input range can be set independently for each channel via software, and the product's operation can be verified using an internal reference power supply. 【Features】 - 16 single-ended channels and 8 differential channels, with input ranges configurable for 8 voltage input ranges and 1 current input range - Input ranges can be set independently for each channel via software - Product operation can be verified using an internal reference power supply *For more details, please refer to the PDF document or feel free to contact us.

• Embedded Board Computers

The DCP-5142 is a Compact PCI bus board that uses RS-422 and RS-485 transceivers for its communication interface. It complies with the RoHS directive and features 4 channels, equipped with 4 D-SUB 15-pin connectors. Additionally, it allows for switching between full duplex/half duplex settings using a slide switch, and for switching the termination resistance settings using a toggle switch. 【Features】 ■ RoHS directive compliant ■ 4 channels RS-422/RS-485 ■ 4 D-SUB 15-pin connectors ■ Full duplex/half duplex setting switchable via slide switch ■ Termination resistance setting switchable via toggle switch *For more details, please refer to the PDF document or feel free to contact us.

• Expansion Boards

The "Apollon DVE-i6000H-51" is a VME bus board that operates on a single +5V power supply. It can use cables with a locking mechanism compliant with the USB3 Vision standard, allowing for the connection of external USB3 Vision industrial cameras. Additionally, it is equipped with three Gigabit Ethernet ports and features a locking ejector handle. 【Features】 ■ Compatible with cables featuring a locking mechanism according to the USB3 Vision standard ■ Connects external USB3 Vision industrial cameras ■ Equipped with three Gigabit Ethernet ports ■ RAS functions (temperature, voltage, WDT) ■ Features a locking ejector handle ■ Optional implementation of PMC or XMC (please inquire about XMC) *For more details, please refer to the PDF document or feel free to contact us.

• Expansion Boards

The DVE-7211 is a 12-bit resolution AD/DA board with up to 64 channels of analog input and up to 4 channels of analog output. The input range can be selected from six types through jumper settings and software settings, and the range division function is set via switches. Additionally, it can be used with two types of input ranges through software settings, and the output range can be selected from six types. 【Features】 ■ Input range can be selected from six types through jumper settings and software settings ■ Range division function (available only when 64 channels are equipped) is set via switches ■ Usable with two types of input ranges through software settings ■ Input channels (Single-ended: up to 64 channels, Differential: up to 32 channels) *For more details, please refer to the PDF document or feel free to contact us.

• Other embedded systems (software and hardware)

The DVE-7112 is a double-height VME bus board with 12 channels of analog output functionality and a resolution of 12 bits. The output range can be selected for each channel from ±10V, ±5V, 0–10V, 0–5V, 1–5V, 0–20mA, or 4–20mA. Additionally, it can output 0–20mA or 4–20mA current without an external power supply and operates with a single +5V power supply provided by the VME bus. 【Features】 ■ DA functionality ■ Output range can be selected from 7 different ranges for each channel ■ Can output 0–20mA or 4–20mA current without an external power supply ■ Channel-to-channel isolation ■ Operates with a single +5V power supply provided by the VME bus *For more details, please refer to the PDF documentation or feel free to contact us.

• Expansion Boards

"Rosewood II" is a VME bus board in a 6U 4HP size that features a 6th generation Intel Core™ processor. It has two 260-pin DDR4-2133 SO-DIMM sockets for main memory, which can support a maximum of 32GB. Additionally, it is equipped with an external USB 2.0 controller for installing legacy operating systems, compatible with Windows, Linux, and VxWorks. 【Features】 ■ Utilizes ultra-low power 6th generation Intel Core™ processor ■ 6U 4HP size ■ Supports a maximum of 32GB of memory ■ Equipped with an external USB 2.0 controller for installing legacy operating systems ■ Compatible OS: Windows, Linux, VxWorks *For more details, please refer to the PDF document or feel free to contact us.

• Expansion Boards

The "Vegawood DCP-i6000U-36" is a CompactPCI bus board in a 3U8HP size that features an Intel 6th generation processor. It is equipped with two DDR4 SO-DIMM sockets for main memory, allowing for a maximum of 32GB of memory. Additionally, it can accommodate an mSATA SSD for internal storage, and it supports a maximum resolution of 4K display. 【Features】 ■ Supports Intel 6th generation Skylake-U processor ■ 3U8HP size ■ Capable of implementing up to 32GB of memory ■ Can accommodate mSATA SSD for internal storage ■ Two Ethernet (RJ45) ports ■ Maximum resolution of 4K (3840×2160) display *For more details, please refer to the PDF document or feel free to contact us.

• Expansion Boards

"Pinewood" is a Compact PCI bus board that features the 6th generation Intel Xeon/Core processors. It has two ECC-compatible 260Pin DDR4-2133 SO-DIMM sockets for main memory, which can support a maximum of 32GB. Additionally, it includes four Gigabit Ethernet ports, three USB 3.0 ports, one Display Port, and one COM connector. 【Features】 ■ Equipped with 6th generation Intel Xeon/Core processors ■ 6U 4HP/8HP size ■ Two ECC-compatible 260Pin DDR4-2133 SO-DIMM sockets for main memory ■ SO-DIMM sockets can support a maximum of 32GB ■ Four Gigabit Ethernet ports *For more details, please refer to the PDF document or feel free to contact us.

• Expansion Boards

The "DPS-i11KU-05" is a Compact PCI Serial bus board that adopts the 11th generation Intel Core processor. By supporting high-speed communication with CompactPCI Serial, it enables system upgrades that leverage the high-speed CPU. External storage can be selected as mSATA M.2, allowing for a reduction in USB and SATA cables on the backplane. 【Features】 ■ Enables system upgrades that leverage a high-speed CPU ■ External storage can be selected as mSATA M.2 ■ Allows for a reduction in USB and SATA cables on the backplane ■ Temperature range (-20 to 70℃) *For more details, please refer to the PDF document or feel free to contact us.

• Expansion Boards

The "DVE-ZU01" is a VME board that enables long-term product supply due to the adoption of the Zynq UltraScale+ MPSoC. By configuring I/O in the FPGA, the number of components is reduced, mitigating the risk of component supply issues. Various device drivers for ITRON-based OS are available upon request. It features excellent environmental resistance with low CPU heat generation, and is equipped with 4 RS232C ports and 4 Gigabit Ethernet ports. 【Features】 ■ Adoption of Zynq UltraScale+ MPSoC ■ Long-term product supply capability ■ Reduced component count and supply risk by configuring I/O in the FPGA ■ Excellent environmental resistance with low CPU heat generation ■ Equipped with 4 RS232C ports and 4 Gigabit Ethernet ports *For more details, please refer to the PDF document or feel free to contact us.

• Expansion Boards