矢崎エナジーシステム List of Products and Services

The "Dust-Free Ace Mic SAS-R2" achieves a cleanliness class of 1,000 (FED standard FED-STD-209E) by adopting new materials and structures while eliminating the base fabric, making it suitable for use in clean rooms. Additionally, due to good conductivity between the top and bottom of the sheet, it allows for direct discharge (grounding), making it a versatile conductive sheet that can be used on floors, work tables, and shelves.

• Anti-static products
• Conductive Mat

"The Earth In 600V-CV" is a compact and lightweight 600V cross-linked polyethylene insulated vinyl sheath cable with a reduced size earth wire. It can be used for applications such as wiring for factory outlets, 200V wiring for residential air conditioners and induction heating, power wiring, storage heating wiring, and interconnections for solar panels.

• cable

This LAN cable supports 10BASE-T to 1000BASE-T and features a REELEX (figure-eight winding) design, making it easy to pull out from the case.

• Wiring materials
• cable
• Other cable related products

It complies with the "standards for heat-resistant wires" according to the Fire Service Act and is used in low-voltage circuits for devices such as fire hydrants, sprinkler activation devices, and alarm systems.

• Wiring materials
• cable
• Other cable related products

It is widely used for telephone purposes. To improve crosstalk characteristics, a twisted structure is adopted, and a fine pitch is set. It can also be used for LAN as 10BASE-T.

• Wiring materials
• cable
• Other cable related products

This is a vinyl insulated vinyl sheathed cable (VVR) widely used for branch lines from the main lines of various equipment, control panels, and substations in factories, etc.

• Wiring materials
• cable
• Other cable related products

We offer "Ace Mic Binder," which has a conductive coating on both sides of the hard plastic to maintain stable performance. Additionally, we also have "ESD Clear Holders" that can be used in processes where static electricity generation is a concern.

• Anti-static products
• Office supplies and stationery

It is a vinyl insulated wire used for low voltage overhead power lines, coated with weather-resistant black vinyl.

• Wiring materials
• cable
• Other cable related products

It is a communication cable that is coded for use in internal communication lines, featuring an electrostatic shielding layer made of aluminum foil laminated plastic tape and drain wire.

• Wiring materials
• cable
• Other cable related products

This is a vinyl insulated electric wire of a combined type used for low-voltage overhead service lines.

• Wiring materials
• cable
• Other cable related products

This is an alarm cable used in the detection circuits of automatic fire alarms and leakage fire alarm devices.

• Wiring materials
• cable
• Other cable related products

The earth code is between the conductive sheet and the mat, as well as between the conductive sheet and the mat themselves. The grounding terminal allows for a one-touch connection via a snap terminal. It contains a 1MΩ resistor.

• Anti-static products

This is a cross-linked polyethylene insulated vinyl sheath cable with excellent electrical and physical properties, designed for 6kV wiring circuits. Additionally, we offer a single-core and a triplex type made up of three strands. We also have the EE type, which features a three-layer structure of an internal semiconducting layer, an insulator, and an external semiconducting layer, all extruded simultaneously. The EE type is particularly resistant to water treeing.

• Wiring materials
• cable
• Other cable related products

We offer "double-sided conductive tape" for connections between conductive flooring and other conductive materials, as well as for various applications such as grounding, and "copper foil tape" for connecting conductive flooring and table mats, or for use as EMI shielding material.

• Adhesive tape
• Anti-static products

We have prepared a compact, portable digital display static electricity FMX004.

• EMC/Static electricity measuring equipment
• Other measurement, recording and measuring instruments

The "Shield Bag #8000" is designed to have effective shielding properties against static electricity, demonstrating over 96% static electricity shielding effectiveness.

• Anti-static products

We use conductive plastic corners and conductive rubber casters, so we have "Angle Carry," which can be grounded simply by placing it on an electrostatic discharge floor, and "Container," which prevents static electricity buildup and the adhesion of dust and dirt. Both have a resistance value of 10^6 Ω or less.

• Anti-static products
• Conductive Mat

The aerostat has a built-in ion balance circuit and is available in a tabletop type and a small lightweight type.

• Anti-static products
• Ionizers and static eliminators

The conductive PVC sheet "Ace Mic SAS-R2" is a long sheet with excellent electrical performance and high cost performance.

• Anti-static products
• Conductive Mat

The conductive PVC tile "Ace Mic SCT-R2" is a conductive tile that meets NFPA standards, featuring stable electrical performance and durability. We promise to ensure comprehensive electrostatic measures from acceptance to shipment.

• Anti-static products
• Conductive Mat

We have prepared a rubber mat "conductive rubber mat" suitable for workbenches that use solder. The color is green.

• Anti-static products
• Conductive Mat

As part of our measures against static electricity, this can be used in computer rooms, offices, and more. We offer a wide variety of sizes. We promise comprehensive solutions for static electricity control from acceptance to shipment.

• Anti-static products
• Safety shoes and sneakers

This is a flat cable with vinyl insulation and vinyl sheath widely used for indoor low-voltage wiring in buildings. It is available with a G mark for grounding circuits, a 200 mark for 200V circuits, and color variations for distinguishing wiring circuits.

• Wiring materials
• cable

"EF Earth" is designed with a structure that adheres the ground wire to the outside of the wire sheath, allowing for easy separation of the ground wire. This has significantly improved work efficiency (in terms of extracting the ground wire, threading, identification, etc.).

• Wiring materials
• cable

"Yazaki Branch" is an electrical wiring system developed for the streamlining and high reliability of low-voltage wiring work in buildings, apartment complexes, factories, schools, and other facilities. This system consists of cables that have been pre-processed for the connection of main cables and branch cables at the factory. It is an excellent prefabricated main cable that achieves labor-saving in on-site work, shortens construction periods, and ensures high reliability in low-voltage wiring work.

• Wiring materials
• cable

The "Yazaki Unit" is an electrical wiring system developed to streamline indoor wiring work for single-family homes, apartment buildings, and condominiums, with a focus on high reliability. It is an excellent indoor unit cable that connects the necessary electrical wiring circuits in advance at the factory and molds the connection parts. While inheriting the high reliability and high-quality performance of conventional units, it has been further slimmed down and miniaturized. In particular, its shape allows for a variety of installation methods, significantly improving workability at construction sites.

• Wiring materials
• cable

"Sansoft cable" is a type of cable mainly used for the connection from utility poles to the eaves of houses. It is designed to have weather resistance and flexibility with an insulation of 600V-CV, combining the handling characteristics of VVR cables with the current capacity of CV cables. It has a higher allowable current than VVR, allowing for a reduction in conductor size by one to two sizes.

• Wiring materials
• cable

"Soft EM wires and cables" have excellent handling properties due to their soft insulation and sheath. They are also highly recyclable, which helps reduce waste. We offer a wide variety of types, including power and control cables, communication cables, and disaster prevention cables.

• Wiring materials

The CV cable live line deterioration diagnosis device DISC-20-AS is designed to accurately detect harmful water trees, which account for the majority of insulation breakdown accidents in 6kV class CV cables, allowing for planned cable replacement work. Furthermore, this insulation diagnosis is performed while the line is live, eliminating the need for cumbersome tasks such as notifying of power outages on the tracks. Additionally, since the diagnosis is conducted for all three phases simultaneously, maintenance and inspection of the cables can be carried out efficiently. Moreover, the device can be safely operated by simply attaching it to the existing grounding wire. This device is a model change that retains the basic characteristics and functions of the DISC-10G-AS while improving usability.

• Other inspection equipment and devices
• Other cable related products

Cutting in high places or narrow spaces is safe, and internal wiring can be done neatly in a short time. The "Soft Wire 600V・6kV Series" is softer than conventional products, making it easy to shape and maintain the desired form when bent. The deflection amount is 2 to 3 times that of other companies! (For 200mm²) Wiring work in tight spaces can be done safely and quickly, reducing various risks during cutting operations. The "Soft Wire Premium 600V-CVT Series" further improves the workability of the "Soft Wire"! Particularly, workability at low temperatures (5°C) has significantly improved. 【Features】 ■ Easy to shape and maintain bent forms ■ Enhanced safety and peace of mind ■ Improved workability, reducing work time

• Wiring materials