冨士ベークライト List of Products and Services

The "FB20C001" is an antistatic case that uses e-mateX FB-0215 or e-mateX FB-0220 materials for the cover and body, achieving lower outgassing than typical ABS cases and lower cost compared to PBT cases. The case materials come in a variety of colors, and identification for each process is possible. Additionally, we also offer the "FB20C004," which uses e-mateX FB-0530 series materials for the body, providing wear resistance. 【Specifications (partial)】 ■External dimensions - Cover: (Width) 300mm × (Length) 300mm × (Height from sealing surface to top) 120mm - Body: (Width) 300mm × (Length) 300mm × (Height from bottom to sealing surface) 140mm ■Materials - Cover: FB-0215 (transparent), FB-0220 (non-transparent) - Body: FB-0213 (transparent), FB-0215 (transparent) *For more details, please refer to the related links or feel free to contact us.

• Career

The "FB15C000" is a 6-inch anti-static transparent case that uses e-mateX FB-0215 material for the cover and e-mateX FB-0530 material for the body, providing transparency for the cover and abrasion resistance for the body. A holder for the lot card can also be welded onto the top surface of the cover. The transparent cover material e-mateX FB-0215 comes in various color variations, allowing for identification at each stage of processing. 【Specifications】 ■ External dimensions - Cover: (Total width) 250mm × (Total length) 232mm × (Height from seal surface to top) 94.5mm - Body: (Total width) 243.6mm × (Total length) 224.6mm × (Height from bottom surface to seal surface) 104.5mm ■ Card holder: Available (on the top surface of the cover), Not available ■ Hinge: None ■ Materials: Cover/FB-0215 (transparent)・FB-0220 (non-transparent), Body/FB-0530 (black) *For more details, please refer to the related links or feel free to contact us.

• Career

The "FB15C001" is an antistatic transparent case that uses e-mateX FB-0210 series material for the cover and e-mateX FB-530 and e-mateX FB-0431 materials for the body, providing transparency for the cover and abrasion resistance for the body. The front side of the cover opens widely, making it easy to insert and remove the carrier. The barcode label on the carrier can also be scanned by a reader without opening the cover. Additionally, there are two types available: with hinge and without hinge, allowing you to choose based on your needs. 【Specifications】 ■External dimensions ・Cover: (Width) 220mm × (Length) 215mm × (Height from seal surface to top) 81.7mm ・Body: (Width) 219.23mm × (Length) 210mm × (Height from bottom surface to seal surface) 99.8mm ■Card holder: None ■Hinge: Available, Not available ■Materials: Cover/FB-0215 (transparent), Body/FB-0530 (black)・FB-0431 (black) 　*Products will be shipped with the new grade FB-0437 material (black) from April 2022 onwards. *For more details, please refer to the related links or feel free to contact us.

• Career

The "FB12C001" is an anti-static case that uses e-mateX FB-0220 material for the cover and body, achieving lower outgassing compared to typical ABS cases, and also lower cost compared to PBT cases. A holder for the lot card is welded onto the top surface of the cover. The case material e-mateX FB-0220 comes in a variety of colors, allowing for identification at each stage of the process. 【Specifications】 ■External Dimensions - Cover: (Width) 172.1mm × (Length) 182mm × (Height from seal surface to top) 66mm - Body: (Width) 172.1mm × (Length) 182mm × (Height from bottom to seal surface) 95mm ■Card Holder: Yes (on the top surface of the cover) ■Hinge: None ■Material (Cover & Body): FB-0220 (non-transparent) *For more details, please refer to the related links or feel free to contact us.

• Career

The "FB12C000" is a transparent anti-static case that uses e-mateX FB-0215 material for the cover and e-mateX FB-0530 material for the body, providing transparency for the cover and abrasion resistance for the body. The front side of the cover opens widely, making it easy to insert and remove the carrier. The barcode label on the carrier can also be scanned by a reader without opening the cover. 【Specifications】 ■External dimensions - Cover: (Total width) 180mm × (Total length) 209mm × (Height from seal surface to top) 68.5mm - Body: (Height from bottom surface to seal surface) 101mm ■Card holder: None ■Hinge: Available, Not available ■Materials: Cover/FB-0215 (transparent), Body/FB-0530 (black) *For more details, please refer to the related links or feel free to contact us.

• Career

The "FB10C000" is an antistatic case that uses e-mateX FB-0200 series materials for the cover and body, achieving lower outgassing than typical ABS cases, and lower cost compared to PBT cases. Additionally, the cover is made transparent by using e-mateX FB-0215 material, allowing for easy visibility of the stored carrier. By using colored materials for the case, identification is also possible. 【Specifications】 ■External Dimensions ・Cover: (Width) 154mm × (Length) 197mm × (Height from seal surface to top) 53.3mm ・Body: (Width) 148.3mm × (Length) 191.3mm × (Height from bottom to seal surface) 76mm ■Card Holder: None ■Hinge: Available, Not Available ■Materials (Cover・Body): FB-0220 (Opaque), FB-0215 (Transparent) *For more details, please refer to the related links or feel free to contact us.

• Career

The "FB20A106" is a 13-slot carrier designed for use as a carrier for thin wafers (Backgrinded Wafer) in the later process, utilizing the e-mateX FB-0430 series materials, which have a proven track record as a front-end carrier. Unlike conventional carriers that are machined to create 13 slots, this product offers stable quality through mold production. Additionally, to minimize the deflection of thin wafers, the length of the comb teeth has been extended to 20.15mm. 【Specifications】 ■ Slots: 13 ■ External dimensions: Total length (A1) 214.74mm × Flange outer width (A2) 240mm × Total height (A3) 219.06mm ■ D1 dimension: 34.93mm ■ Groove pitch: 12.7mm ■ Handle: Available (with identification marker mounting hole) / Not available ■ Materials: Standard material (FB-0431) / Heat-resistant material (FB-0432) 　※ Products will be shipped using the new grade FB-0437 material from April 2022 onwards. ※ For more details, please refer to the related links or feel free to contact us.

• Career

The electrostatic discharge prevention carrier "FB20A107" uses e-mateX FB-0430 series materials and is an upgraded version of the conventional PP and PBT carriers. It is recommended when deformation and particles are an issue with PP and PBT carriers. This carrier has significantly superior dimensional stability and wear resistance. It is particularly recommended as a low-cost carrier with performance comparable to existing PEEK carriers. 【Specifications】 ■ Slots: 25 ■ External dimensions: Total length (A1) 203.7mm × Flange outer width (A2) 234.44mm × Total height (A3) 219.08mm ■ D1 dimension: 25.4mm ■ Groove pitch: 6.35mm ■ Handle: Available (with identification marker mounting hole) / Not available ■ Materials: Standard material (FB-0431) / Heat-resistant material (FB-0432) 　※ Products will be shipped with the new grade FB-0437 material after April 2022. ※ For more details, please refer to the related links or feel free to contact us.

• Career

The electrostatic discharge prevention carrier 'FB20A103' uses e-mateX FB-0430 series materials and is an upgraded version of the conventional PP and PBT carriers. It is recommended when deformation and particles are an issue with PP and PBT carriers. This carrier has significantly superior dimensional stability and wear resistance. In particular, it is recommended as a low-cost carrier with performance comparable to existing PEEK carriers. 【Specifications】 ■ Slots: 25 ■ External dimensions: Total length (A1) 203.2mm × Flange outer width (A2) 240mm × Total height (A3) 219.08mm ■ D1 dimension: 25.4mm ■ Groove pitch: 6.35mm ■ Handle: Available / Not available ■ Material: Heat-resistant material (FB-0432) 　※ Products will be shipped with the new grade FB-0437 material after April 2022. * For more details, please refer to the related links or feel free to contact us.

• Career

The electrostatic discharge prevention carrier 'FB20A102' uses e-mateX FB-0430 series materials and is an upgraded version of the conventional PP carrier and PBT carrier. It is recommended when deformation and particles are an issue with PP and PBT carriers. This carrier has significantly superior dimensional stability and wear resistance. In particular, it is recommended as a low-cost carrier with performance comparable to existing PEEK carriers. 【Specifications】 ■ Slots: 25 ■ External dimensions: Total length (A1) 203.2mm × Flange outer width (A2) 235mm × Total height (A3) 219mm ■ D1 dimension: 25.4mm ■ Groove pitch: 6.35mm ■ Handle: Available (with identification marker mounting hole) / Not available ■ Materials: Standard material (FB-0431) / Heat-resistant material (FB-0432) 　※ Products will be shipped with the new grade FB-0437 material from April 2022 onwards. ※ For more details, please refer to the related links or feel free to contact us.

• Career

The static prevention carrier 'FB20A100' uses e-mateX FB-0430 series materials and is an upgraded version of the conventional PP and PBT carriers. It is recommended when deformation and particles are an issue with PP and PBT carriers. This carrier has significantly superior dimensional stability and wear resistance. In particular, it is recommended as a low-cost carrier with performance comparable to existing PEEK carriers. 【Specifications】 ■ Slots: 26 ■ External dimensions: Total length (A1) 209.55mm × Flange outer width (A2) 235mm × Total height (A3) 219mm ■ D1 dimension: 25.4mm ■ Groove pitch: 6.35mm ■ Handle: None ■ Material: Standard material (FB-0431) 　※ Products will be shipped with the new grade FB-0437 material from April 2022 onwards. ※ For more details, please refer to the related links or feel free to contact us.

• Career

The "FB15A101" is a 13-slot carrier designed for use as a carrier for thin wafers (Backgrinded Wafer) in the later process, utilizing the e-mateX FB-0430 series materials, which have a proven track record as a front-end carrier. Unlike conventional carriers that are machined to create 13 slots, this product offers stable quality through mold production. Additionally, to minimize the deflection of thin wafers, the length of the comb teeth has been extended to 15mm. 【Specifications】 ■ Slots: 13 ■ External dimensions: Total length (A1) 155.48mm × Flange outer width (A2) 177.5mm × Total height (A3) 170.7mm ■ D1 dimension: 22.49mm ■ Groove pitch: 9.525mm ■ Handle: Available / Not available ■ Materials: Standard material (FB-0431) / Heat-resistant material (FB-0432) * Products will be shipped with the new grade FB-0437 material from April 2022 onwards. * For more details, please refer to the related links or feel free to contact us.

• Career

The static prevention carrier 'FB15A105' uses e-mateX FB-0430 series materials and is an upgraded version of the conventional PP and PBT carriers. Recommended when deformation and particles are an issue with PP and PBT carriers. This carrier has significantly superior dimensional stability and wear resistance. 【Specifications】 ■ Slots: 25 ■ External dimensions: Total length (A1) 143.4mm × Flange outer width (A2) 177.8mm × Total height (A3) 162.8mm ■ D1 dimension: 14.54mm ■ Groove pitch: 4.7625mm ■ Handle: Available (with identification marker mounting hole) / Not available ■ Materials: Standard material (FB-0431) / Heat-resistant material (FB-0432) * Products will be shipped with the new grade FB-0437 material after April 2022. * For more details, please refer to the related links or feel free to contact us.

• Career

The static prevention carrier 'FB15A104' is made using e-mateX FB-0430 series materials and is an upgraded version of the conventional PP and PBT carriers. It is recommended when deformation and particles are problematic with PP and PBT carriers. This carrier has significantly superior dimensional stability and wear resistance. 【Specifications】 ■ Slots: 25 ■ External dimensions: Total length (A1) 143.0mm × Flange outer width (A2) 170.0mm × Total height (A3) 165.0mm ■ D1 dimension: 14.54mm ■ Groove pitch: 4.7625mm ■ Handle: None ■ Material: Heat-resistant material (FB-0432) 　※ Products will be shipped with the new grade FB-0437 material after April 2022. ※ For more details, please refer to the related links or feel free to contact us.

• Career

The electrostatic discharge prevention carrier "FB15A102" is made using e-mateX FB-0430 series materials and is an upgraded version of the conventional PP and PBT carriers. Recommended when deformation and particles are an issue with PP and PBT carriers. This carrier has significantly superior dimensional stability and wear resistance. 【Specifications】 ■ Slots: 25 ■ External dimensions: Total length (A1) 142.24mm × Flange outer width (A2) 187.0mm × Total height (A3) 165.0mm ■ D1 dimension: 13.97mm ■ Groove pitch: 4.7625mm ■ Handle: Available (with identification marker mounting hole) / Not available ■ Materials: Standard material (FB-0431) / Heat-resistant material (FB-0432) * Products will be shipped with the new grade FB-0437 material from April 2022 onwards. * For more details, please refer to the related links or feel free to contact us.

• Career

The static prevention carrier 'FB15A100' uses e-mateX FB-0430 series materials and is an upgraded version of the conventional PP carrier and PBT carrier. Recommended when deformation and particles are an issue with PP carriers and PBT carriers. This carrier has significantly superior dimensional stability and wear resistance. 【Specifications】 ■ Slots: 25 ■ External dimensions: Total length (A1) 143mm × Flange outer width (A2) 177.5mm × Total height (A3) 170.7mm ■ D1 dimension: 14.53mm ■ Groove pitch: 4.7625mm ■ Handle: Available (with identification marker mounting hole) / Not available ■ Materials: Standard material (FB-0431) / Heat-resistant material (FB-0432) * Products will be shipped with the new grade FB-0437 material from April 2022 onwards. * For more details, please refer to the related links or feel free to contact us.

• Career

The static prevention carrier 'FB12A100' uses e-mateX FB-0430 series materials and is an upgraded version of the conventional PP and PBT carriers. Recommended when deformation and particles are an issue with PP or PBT carriers. This carrier has significantly superior dimensional stability and wear resistance. 【Specifications】 ■ Slots: 25 ■ External dimensions: Total length (A1) 143.38mm × Flange outer width (A2) 153.5mm × Total height (A3) 146.05mm ■ D1 dimension: 14.4mm ■ Groove pitch: 4.7625mm ■ Handle: Available (with identification marker mounting hole) or not available ■ Material: Standard material (FB-0431) 　※ Products will be shipped with the new grade FB-0437 material from April 2022 onwards. *For more details, please refer to the related links or feel free to contact us.

• Career

The static prevention carrier 'FB10A100' uses e-mateX FB-0430 series materials and is an upgraded version of conventional PP carriers and PBT carriers. Recommended when deformation and particles are an issue with PP carriers and PBT carriers. This carrier has significantly superior dimensional stability and abrasion resistance. 【Specifications】 ■ Slots: 25 ■ External dimensions: Total length (A1) 142.24mm × Flange outer width (A2) 125.48mm × Total height (A3) 114.3mm ■ D1 dimension: 14.3mm ■ Groove pitch: 4.7625mm ■ Handle: Available (with identification marker mounting hole) / Not available ■ Material: Standard material (FB-0431) * Products will be shipped with the new grade FB-0437 material after April 2022. * For more details, please refer to the related links or feel free to contact us.

• Career

The wafer case "Paragon series" is a semiconductor container (carrier case) made using our unique COC material. The Paragon case utilizes our proprietary materials for both the cover and body, offering transparency in the cover and superior abrasion resistance in the body that traditional PP and PBT cases do not provide. It has been adopted for many years by numerous global companies, including some of the world's largest foundry manufacturers. This track record demonstrates the reliability and high performance of the product. Sizes are available for 4, 5, 6, and 8 inches. 【Features】 ■ Transparent cover allows for easy inspection of stored carriers ■ Available in various colors ■ Abrasion resistance and chemical resistance ■ Electrostatic discharge prevention ■ Low outgassing ■ High cost performance *For more details, please download the PDF or feel free to contact us.

• Plastic utensils and containers
• Other semiconductors

Amid the advancing low birthrate and aging population, there is a growing interest in health, bringing attention to "medical care." Fujibakelite supplies clean and highly airtight components for medical devices, particularly for medical testing equipment that involves reagents flowing through them. The company also accommodates various complex shapes of precision molded parts.

• Other machine elements
• Contract manufacturing

Until now, it has been difficult to add decorations to three-dimensional shapes. Additionally, it will also be possible to create patterns and color separations that cannot be achieved with painting.

• others

Since two materials can be molded at once with injection molding, assembly is not required.

• Engineering Plastics
• others

It is a coating that excels in scratch resistance, heat resistance, and chemical resistance.

• plastic
• Other surface treatment equipment
• spray

The delivery time, cost, and quality are achievable because of our integrated production.

• Engineering Plastics

The quality of high-design products has improved due to the elimination of welding. Additionally, in some cases, the removal of decoration (painting) may also be possible.

• Engineering Plastics

Fine text and marks can be printed clearly on curved surfaces without smudging or chipping, thanks to our unique know-how.

• others

It is a painting method that does not require organic solvents. Water is used instead of organic solvents.

• others