ウインテクス List of Products and Services

The "Thermocouple Connector Dedicated Cable" is a round insulated cable with no bending direction, consisting of seven strands equivalent to thermocouple wire of grade 0.4 for high-precision measurements. We offer thermocouple cables dedicated to WINC5 connectors and WINC1 connectors. Please feel free to contact us for inquiries. 【Features】 ■ Implemented with seven strands equivalent to thermocouple wire of grade 0.4 for high-precision measurements ■ Round insulation with no bending direction ■ Thermocouple cables dedicated to WINC5 connectors and WINC1 connectors are available *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments
• cable

We would like to introduce the "Compensation Wires for Wiring Inside Electrical Panels" handled by Wintex. These are parallel two-core wires with a round cross-section, suitable for the back of outlets and Y-type crimp terminals. We offer compensation wires for WINCON5 type small outlets, WINCON1 type outlets, and thermocouple Y-type terminals. Please feel free to contact us for inquiries. 【Features】 ■ For stationary wiring ■ Round cross-section parallel two-core ■ Suitable for the back of outlets and Y-type crimp terminals ■ Compensation wires for WINCON5 type small outlets, WINCON1 type outlets, and thermocouple Y-type terminals are available *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments
• cable

The "All Teflon Coated Thermocouple" is a new type of thermocouple that has undergone a re-Teflon coating treatment at the tip of a flat Teflon coated thermocouple. It offers good flexibility and durability. It fully utilizes the corrosion resistance properties of Teflon, which excels in resisting acids, alkalis, and salts, areas where stainless steel sheath thermocouples typically struggle. It can also be used for temperature measurement of printed circuit boards during operation, eliminating concerns about electrical insulation and water resistance. If there is a risk of secondary accidents due to coating damage, please consider double coating. 【Features】 ■ Complete Teflon coating ■ Good electrical insulation ■ Excellent resistance to acids, alkalis, salts, and water ■ Good flexibility ■ Good durability *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Other temperature and humidity measuring instruments

The "Thermocouple Table Tap" eliminates the hassle of screwing and unscrewing when connecting to recorders or data loggers for multi-point thermocouple measurements. We offer two types of plug models: WINC1 and WIINC5. All connection parts are made of thermocouple equivalent metals, so there is no concern about temperature errors due to dissimilar metals, and the outlets are numbered to prevent mistakes in measurement points. Additionally, the color display matches the JIS thermocouple insulation colors, preventing incorrect installation of thermocouple types. 【Features】 - Eliminates the hassle of screwing and unscrewing when connecting to recorders or data loggers for multi-point thermocouple measurements. - Resolves connection errors: - All connection parts are made of thermocouple equivalent metals. - No concern about temperature errors due to dissimilar metals. *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Other temperature and humidity measuring instruments

The "Thermocouple with Heat Contact Silica/Glass Fiber Coating" is a thermocouple with a heat contact designed for simple measurements at +700°C. The coating's heat resistance temperature has been increased to +700°C (when φ0.5mm), and the Inconel mesh product has improved abrasion resistance, enhancing performance. It contributes to improving the working environment by reducing the prickly sensation of glass fibers when touched, minimizing the scattering of fine broken glass fiber debris, and decreasing organic smoke during high-temperature measurements. Please note that this product is intended for testing, development, and experimental use. If you require durability, please consider the SUS sheath type thermocouple. 【Features】 ■ Thermocouple with heat contact for simple measurements at +700°C ■ Coating heat resistance temperature increased to +700°C (when φ0.5mm) ■ Reduced prickly sensation of glass fibers when touched ■ Less scattering of fine broken glass fiber debris *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Other temperature and humidity measuring instruments

The "ceramic fiber-coated thermocouple with a hot junction" is a thermocouple with a hot junction for simple measurements up to +900°C. The coating's heat resistance temperature has been increased to +900°C, and the Inconel mesh product has improved abrasion resistance, enhancing performance. It uses fine ceramic fibers, which reduce the prickly sensation when touched. Additionally, it is coated with a silicone-based coating agent that produces less smoke at high temperatures, and it minimizes the scattering of fine broken glass fiber debris, contributing to an improved working environment. Please note that this product is intended for testing and experimental use, so if you require durability, please consider the SUS sheath type thermocouple. 【Features】 ■ Thermocouple with a hot junction for simple measurements up to +900°C ■ Coating heat resistance temperature increased to +900°C ■ Uses fine ceramic fibers to reduce the prickly sensation when touched ■ Coated with a silicone-based agent that produces less smoke even at high temperatures *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Other temperature and humidity measuring instruments

We would like to introduce the "thermocouple relay components" handled by Waintex. The thermocouple relay terminal blocks are available with 6, 8, or 12 terminals, and the thermocouple relay terminals come in packs of 1 bag with ±3 pairs, featuring types K/J/E/T/R/U. The thermocouple Y-type terminals are also available in packs of 1 bag with ±3 pairs, with a maximum wire diameter of 1mm, and types K/J/E/T/R/U are provided. Additionally, we offer precision thermocouple wires in five different insulation materials, which can be used for thermocouple manufacturing or as extension cords for thermocouple connectors. 【Specifications (partial)】 ■ Thermocouple relay terminal blocks - Products available with 6, 8, or 12 terminals ■ Thermocouple relay terminals - Pack of 1 bag with ±3 pairs - Products available in types K/J/E/T/R/U *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Other terminal blocks
• Other temperature and humidity measuring instruments

The "thermocouple socket" can be easily attached without worrying about measurement errors when connecting to control panels or equipment. The connection part is the same as the Wintex connector, and installation only requires drilling a hole to the cut dimensions, with no need for fixing screws. We offer WINCON (Wincon) Type 1 with a cut dimension of 30×16mm and WINCON Type 5 with a cut dimension of 16.5×8mm. Additionally, there is a dedicated mounting panel for the Wintex sockets WINCON Type 1 and Type 5 called the "Wintex Socket Mounting Panel." 【Features】 ■ Dedicated socket for thermocouples to be mounted on instrument panels ■ No concern for measurement errors when connecting to control panels or equipment ■ Easy to install ■ Installation only requires drilling a hole to the cut dimensions, with no need for fixing screws ■ Wintex socket mounting panel is also available *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Other Connectors
• Other temperature and humidity measuring instruments

Our "Thermocouple Connector" is manufactured with joints made of the same metal as the thermocouple, eliminating measurement errors due to dissimilar metals. Additionally, it is the same color as the JIS thermocouple standard, preventing installation mistakes. We offer a lineup of products including WINC (Wink) Type 1, WINC Type 3, WINC Type 5, and WINC Type 7. The thermocouple types for WINC1/WINC5 are K/J/E/T/R/U, while for WINC3/WINC7, the thermocouple types are K/J/E. We also provide accessories such as the "Cable Clamp" for supporting cables specifically for Wintax connectors and "Drip-proof Rubber Covers" to protect against moisture and raindrops during outdoor measurements. 【Features】 ■ Dedicated thermocouple connector for instrument panels ■ Joints made of the same metal as the thermocouple ■ No measurement errors due to dissimilar metals, as it is the same color as the JIS thermocouple standard ■ Products available in WINC (Wink) Type 1, WINC Type 3, WINC Type 5, and WINC Type 7 *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors
• Other temperature and humidity measuring instruments

The "Extension Cable with Thermocouple Connector" uses a high-precision thermocouple of class 0.4, ideal for precise temperature measurement. Since the connection part uses a Wintex thermocouple connector, there is no error due to dissimilar metals. You can choose from combinations of 4 types of female connectors on one side, 4 types of thermocouples, 3 types of extension cable insulation, 2 lengths of extension cables, 3 wire diameters, and 3 terminal types. 【Features】 ■ Uses a high-precision thermocouple of class 0.4, ideal for precise temperature measurement ■ Connection part uses Wintex thermocouple connector ■ Female connectors on one side (4 types): WINC1/3/5/7 types ■ Thermocouples (4 types): K, J, E, T (WINC3 type/7 type has 3 types: K, J, E) ■ Extension cable insulation (3 types): Teflon, ultra-high-temperature glass, heat-resistant glass *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Other Connectors
• cable

The "thermocouple with a heat contact" can be used for simple measurements such as temperature distribution measurement. The thermocouple wire is manufactured to Class 0.4 for precise measurements, and the insulation material can be selected based on the usage temperature, ranging from Teflon coating to ceramic coating. There are six types of terminals available, including Y terminals and those with connectors. 【Features】 ■ Thermocouple with heat contact for simple measurements ■ Suitable for simple measurements such as temperature distribution measurement ■ Insulation material can be selected based on usage temperature, from Teflon coating to ceramic coating ■ Six types of terminals available, including Y terminals and those with connectors *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "Ultra-Fine Temperature Detection Probe" is a SUS sheath thermocouple with a connector for detailed measurements. Our temperature detection probe is suitable for accurate temperature measurement of fine details. The "Stainless Steel Sheath Thermocouple Probe" has a sheath material of SUS316, a sheath length of 300mm, and a non-grounded temperature sensing point. Additionally, we also offer the "Ultra-Fine Teflon Coated Thermocouple Probe" with an outer diameter of 0.5mm, a sheath length of 500mm, and a thermocouple wire diameter of 0.08mm. 【Features】 ■ SUS sheath thermocouple with connector for detailed measurements ■ Suitable for accurate temperature measurement of fine details ■ Available in stainless steel sheath / ultra-fine Teflon coated thermocouple probes ■ The ultra-fine Teflon coated thermocouple probe has a Teflon coating outer diameter of 0.5mm *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Other temperature and humidity measuring instruments
• Analytical Equipment and Devices