ガイア List of Products and Services

Alkaline electrolyzed water has the characteristic of gradually decreasing pH when exposed to air. When the pH decreases, the cleaning power also diminishes, which poses a problem for cleaning agents. However, Gaia Water is highly stable and its pH does not significantly decrease even after opening (when the cap is off, the pH decreases significantly). Because it is less likely to have a decrease in pH, the cleaning power remains unchanged, ensuring stable quality. Thanks to our uniquely developed electrolytic system, the ion concentration is always maintained at a constant level, resulting in stable ion concentration. When generating electrolyzed water, potassium carbonate (as opposed to the conventional salt) is used as the electrolyte for electrolysis. Many other companies produce high-alkaline electrolyzed water by directly mixing potassium carbonate as the electrolyte into water. However, Gaia Water generates alkaline electrolyzed water without mixing any potassium carbonate as an electrolyte, resulting in water with almost zero impurities, containing only potassium ions. For more details, please contact us or download the catalog.

• Cleaning agents

The strong alkaline electrolyzed water "Gaia Water" is a cleaning agent that is safe and secure for people, with minimal environmental risks. It is revolutionary water that is strong against oil stains and has excellent cleaning power despite being water. It has already been put to practical use in a wide range of places such as convenience stores, hotels, offices, food factories, beverage filling factories, and metal processing manufacturers. 【Features】 ■ A new strong alkaline electrolyzed water generation device that does not use chemical synthetic substances or surfactants, ensuring safety and security. ■ It generates only the necessary alkaline electrolyzed water, so it does not produce acidic water that has previously been discarded. ■ Capable of producing approximately 3 tons of alkaline electrolyzed water with a pH of 12.5 per day. ■ Capable of producing about 27 liters per hour with a pH of 13.2. ■ pH 13.5 can also be produced. * For more details, please request materials or view the PDF data from the download.

• Other physicochemical equipment

"Gaia Clean" is a photocatalytic processing liquid that cures and adheres at room temperature, making it suitable for processing organic materials such as fibers that cannot undergo high-temperature treatment. "When cleaning walls, detergents are used, but the coating can peel off due to the detergent. Therefore, multiple layers of coating must be applied." Do you have such concerns? With our product, there is no need to apply multiple layers of coating. It can also be used on walls and exhibits deodorizing effects when exposed to ultraviolet light. It is also compatible with visible light. 【Features】 ■ Substrate protection ■ High durability ■ Efficient action ■ Deodorizing effect by soaking into fabric fibers ■ Semi-permanent effect *For more details, please refer to the PDF document or feel free to contact us.

• others

"Gaia Water" is a detergent made of "water" that does not use surfactants, chemicals, or synthetic substances. Since it eliminates the need for double wiping or rinsing, the cleaning process is significantly shortened, leading to reduced labor costs. It is very easy to handle, making it suitable for anyone to use. Additionally, by consolidating existing cleaning agents into this product, cost savings can be achieved. 【Features】 ■ Significant reduction in cleaning process time ■ Safe, secure, and easy cleaning tasks ■ Usable by anyone ■ Reduction in cleaning supplies and equipment ■ No surfactants or synthetic chemicals used *For more details, please refer to the PDF document or feel free to contact us.

• detergent

The "Win-G SN Series" is a new alkaline ion cleaning water system that does not use chemical synthetic substances or surfactants, ensuring safety and security. You only need to change the tank approximately once every 24 hours. When decomposing 1 ton, it typically produces 1 ton of alkaline and acidic substances. With this product, almost no acidity is produced, resulting in less waste and being eco-friendly. 【Features】 ■ Compact, lightweight, and easy to operate ■ Adjustable pH concentration ■ Energy-saving design ■ One-sided water discharge method that does not waste water *For more details, please refer to the PDF materials or feel free to contact us.

• Other physicochemical equipment

The "Win-G SN Series" is a new alkaline ion cleaning water system that does not use chemical synthetic substances or surfactants, ensuring safety and security. It adopts a one-way discharge method that does not produce waste water during the electrolysis process. This significantly reduces labor costs as there is no need for electrolyte replenishment every hour. Additionally, it allows for continuous operation for 24 hours (12 hours for SN-10), enabling mass production. 【Features】 ■ Generates a pH of 13.2 or higher ■ Eliminates waste water and is eco-friendly ■ Capable of mass production and continuous operation ■ Equipped with a simple pH switching function ■ Achieves long lifespan for replacement parts *For more details, please refer to the PDF document or feel free to contact us.

• Other water treatment equipment

"Gaia Water" is a high-performance alkaline cleaning water generated by electrolysis of water. Since it contains no chemical synthetic substances such as surfactants, chemicals, or additives, there are no residues left, and rinsing or wiping down after cleaning is unnecessary. This significantly reduces cleaning time. Additionally, this product has the ability to emulsify fats and proteins, making it possible to easily wash away oil stains without scrubbing. [Benefits for the users] ■ Significant reduction in cleaning processes ■ Safe, secure, and easy cleaning tasks *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables

This document provides an explanation of photocatalysts. It introduces various topics in detail, starting with "Characteristics of Photocatalysts," followed by "Challenges in Commercializing Photocatalysts," and "Features of Gaia Clean." Additionally, it includes photos of Gaia Clean's fiber adhesion, making it a useful reference when considering implementation. We encourage you to read it and make use of the information. 【Contents (partial)】 ■ Characteristics of Photocatalysts ■ Challenges in Commercializing Photocatalysts ■ Gaia Clean Solves All Problems ■ Features of Gaia Clean ■ Gaia Clean Meets Public Standards *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent

We would like to introduce our photocatalytic processing liquid "Gaia Clean." Photocatalytic action (organic matter decomposition) occurs due to ultraviolet rays from natural light and fluorescent lights. It decomposes foul-smelling substances such as ammonia, acetaldehyde, and hydrogen sulfide, and suppresses the growth of bacteria, which is one of the causes of odor generation. Additionally, it decomposes VOC (volatile organic compound) gases such as formaldehyde and toluene, which are said to be emitted mainly from interior materials. 【Features】 ■ Antibacterial effect ■ Deodorizing effect ■ Decomposition of VOC (volatile organic compound) gases *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent

"Gaia Water pH 13.2 (20L)" is a cleaning agent that is produced using our unique technology, ensuring safety and consideration for people, while also posing minimal environmental risks. It has about five times the power of commercially available alkaline electrolyzed water (pH 12.5), and can be used diluted five times for everyday cleaning, making it economical. Additionally, it is very effective when used undiluted in areas with severe oil stains. 【Features】 ■ Capacity: 20L ■ Container: Bag-in-box (with nozzle) ■ pH value - pH 13.2 ■ Expiration date: 1 year (unopened) * For more details, please refer to the PDF document or feel free to contact us. * Please consult us if you require other pH values.

• detergent

"Gaia Water pH 13.2 (5L)" is a revolutionary water that is strong against oil stains and has excellent cleaning power despite being water. For regular cleaning, it can be used diluted 5 times, making it economical, and it is particularly effective when used undiluted in areas with severe oil stains. It has about 5 times the power of commercially available alkaline electrolyzed water (pH 12.5) and is already in practical use in a wide range of places such as major convenience stores, restaurant chains, hotels, offices, food factories, and metal processing manufacturers. [Features] - A safe and secure cleaning agent made from water - A cleaning agent that does not require rinsing or wiping twice - Extremely effective against oil stains despite being water - Deodorizing and antibacterial effects due to negative ion effects *For more details, please refer to the PDF document or feel free to contact us.

• detergent

The "Gaia Water Bulk Tank (1,000L)" is a strong alkaline electrolyzed water with a minimum shipping lot of one tank. It has deodorizing and sterilizing effects due to negative ion effects, and is a safe and secure cleaning agent derived from water, effective against oil stains despite being water. Additionally, while you are required to prepare the container separately, we can also provide it, so please contact us. 【Features】 ■ Capacity: 1,000L ■ Container: Bulk tank with pallet ■ pH value - pH 13.0 - pH 13.2 ■ Shelf life: 1 year (unopened) * For more details, please refer to the PDF document or feel free to contact us. * Please consult us if you require other pH values.

• detergent

This document is the Safety Data Sheet for the high-performance alkaline cleaning water "Gaia Water." It includes information on composition and ingredients, a summary of hazards and harmful effects, exposure prevention and protective measures, as well as physical and chemical properties. It concisely summarizes important points that must be noted for the proper use of the product. Please feel free to download and read it. [Contents (partial)] ■ Product and company information ■ Composition and ingredient information ■ Summary of hazards and harmful effects ■ First aid measures ■ Measures in case of fire *For more details, please refer to the PDF document or feel free to contact us.

• Cleaning agents

The document is a report on the analysis tests conducted for the high-performance alkaline cleaning water "Gaia Water." The test items include sodium, calcium, potassium, magnesium, among others, with methods such as atomic absorption spectrometry, ICP emission spectrometry, and inductively coupled plasma optical emission spectrometry. In addition to the results, the detection limits are also provided. Please feel free to download and review it. 【Listed Test Items (Partial)】 ■ Sodium ■ Calcium ■ Potassium ■ Magnesium ■ Lead *For more details, please refer to the PDF document or feel free to contact us.

• Cleaning agents

This document is a test report on the long-term pH changes of the high-performance alkaline cleaning water "Gaia Water" due to storage (pH after 12 months of continuous use). The product was stored in a container, and pH changes were measured over time after regular sampling, assuming normal use during long-term storage. We present the pH measurement results for each storage period. For details, please download and review the document. [Contents (partial)] ■ Test Purpose ■ Client ■ Testing Organization ■ Testing Period ■ Test Product ■ Test Conditions *For more information, please refer to the PDF document or feel free to contact us.

• Cleaning agents

This document is a test report on the virus inactivation effect of the high-performance alkaline cleaning water "Gaia Water." The study investigates the inactivation effect of this product on the influenza A virus. A method of directly inoculating the test product with the virus solution was used as a basic test system to examine the virus inactivation effect. The test results include the viral infectivity after the action of the test product, the LRV calculated from the infectivity, and the pH measurement results. Please take a look. [Contents (excerpt)] ■ Testing organization ■ Test product ■ Test conditions ■ Test virus and cells for infectivity measurement ■ Main reagents, media, and equipment ■ Test method *For more details, please refer to the PDF document or feel free to contact us.

• Cleaning agents

This document is a test report from the sterilization tests conducted on the high-performance alkaline cleaning water "Gaia Water." The tests were carried out using methods such as the preparation of test bacterial solutions and spore solutions, inoculation and cultivation of test bacterial solutions and spore solutions, and measurement of viable cell counts. The test results include sterilization test results against Staphylococcus aureus in the sample and against Cladosporium cladosporioides. For details, please download and review the document. [Contents] ■ Test Purpose ■ Sample ■ Test Bacteria ■ Test Method ■ Test Results *For more details, please refer to the PDF document or feel free to contact us.

• Cleaning agents

This document is a test report from an odor removal test conducted using the high-performance alkaline cleaning water "Gaia Water." The target odor is hydrogen sulfide, and the testing method used is the Kitagawa detection tube method. The test results include the initial concentration and the residual concentrations after 5 minutes and 30 minutes. For more details, please feel free to download and review the document. [Contents] ■ Purpose ■ Sample ■ Target Odor ■ Testing Method ■ Test Results *For more information, please refer to the PDF document or feel free to contact us.

• Cleaning agents

This document is a test report from a primary skin irritation test conducted on the high-performance alkaline cleaning water "Gaia Water." Using this product as a specimen, a primary skin irritation test was conducted on rabbits in accordance with the OECD Guidelines for the Testing of Chemicals 404 (2002). The test results include information on the formation of erythema and scabs, the formation of edema, and the scoring results of skin reactions. For details, please download and review the document. [Contents (partial)] ■ Summary ■ Specimen ■ Test period ■ Testing facility ■ Test supervisor ■ Test purpose *For more details, please refer to the PDF document or feel free to contact us.

• Cleaning agents

This document is a test report on the antibacterial properties of the photocatalytic processing liquid "Gaia Clean." Pre-irradiation was conducted using a black light at an ultraviolet radiation intensity of 1 mW/cm² for 24 hours. The testing method follows JIS R 1702:2020, using the glass adhesion method. The test results include the logarithmic values of viable bacteria counts, among other data. Please feel free to download and read it. [Test Results Contents] ■Sample ■Logarithmic values of viable bacteria counts ■Antibacterial activity values ■ΔS *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a report on the deodorization and odor removal performance test (using gas detection tubes) conducted with the photocatalytic processing liquid "Gaia Clean." Using a black light, ultraviolet light was irradiated to achieve a surface irradiance of 1 mW/cm² on the sample, and the gas concentration of odor substances inside the bag was measured using gas detection tubes 24 hours after the irradiation began. The test was conducted twice, and the average values of the gas concentrations of the obtained odor substances are included. For more details, please download and review the document. [Contents (partial)] ■ Sample name ■ Method ■ Results *For more information, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a report on the antibacterial tests conducted using the photocatalytic processing solution "Gaia Clean." Tests were performed on Staphylococcus aureus and Klebsiella pneumoniae according to JIS R 1702:2020, using the glass adhesion method. The inspection results include values such as the logarithmic count of viable bacteria and antibacterial activity. For details, please download and review the document. [Contents of Inspection Results] ■Sample ■Logarithmic count of viable bacteria ■Antibacterial activity value ■ΔS *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a test report from an evaluation of the gas removal performance of the photocatalytic processing liquid "Gaia Clean" regarding its photocatalytic effect. The tests were conducted using the methods specified by the SEK mark textile product certification standards. The results for ammonia gas and acetaldehyde gas are included. Further details are introduced in the catalog. Please feel free to download and take a look. [Contents] ■ Test Results ■ Test Methods ■ Samples *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a test report from a deodorization test conducted using the photocatalytic processing liquid "Gaia Clean." The test items include photocatalytic performance evaluation, deodorization test, and visible light. The testing method complies with the Gas Pack B method as per Gaia's internal standards. The test results include the initial concentration, concentration after 24 hours, and reduction rate for processed fabric, unprocessed fabric, and control tests. For more details, please download and view the catalog. [Contents] ■ Test Items ■ Testing Method ■ Test Conditions ■ Test Results *For more information, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a report on the antibacterial properties of photocatalytic processed products using the photocatalytic processing solution "Gaia Clean." The testing method follows JIS R 1702:2020, using the glass adhesion method, with a test duration of 8 hours. The test microorganism used is Staphylococcus aureus NBRC 12732. The test results for both processed and unprocessed test specimens are also included. Please feel free to download and review it. [Contents] ■ Test Samples ■ Test Conditions ■ Test Results *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a report on the evaluation test of gas removal performance conducted for the photocatalytic processing liquid "Gaia Clean" in photocatalytic processing. The product tested is the interior photocatalytic processing liquid "GCI-5K" (visible light responsive). The testing method adopted is based on the standards set by the SEK mark for textile product certification. The test results for ammonia and acetaldehyde are included, detailing concentration, reduction rate, and photocatalytic effect (points). Please feel free to download and review it. [Contents] ■ Client ■ Product Name ■ Test Items ■ Test Results ■ Test Method ■ Sample *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a report on the antibacterial testing of the photocatalytic processing solution "Gaia Clean." The test organism used was Klebsiella pneumoniae NBRC 13277. The testing method adopted was JIS R 1702:2020, using the glass adhesion method as a reference. The test results include the logarithmic values of viable bacterial counts. We encourage you to read it. [Contents] ■Client ■Product Name ■Test Items ■Test Results ■Testing Method ■Sample *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a report on the evaluation test of gas removal performance during the photocatalytic processing using the photocatalytic processing liquid "Gaia Clean." The product tested is the photocatalytic processing liquid for fibers "GCT-2N." The testing method adopted is based on the SEK mark certification standards for textile products, and the test results for ammonia and acetaldehyde are included. Concentrations and reduction rates are documented. Please feel free to download and review it. [Contents] ■Client ■Product Name ■Test Items ■Test Results ■Testing Method ■Sample *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a certificate from the antibacterial testing conducted on the photocatalytic processing liquid "Gaia Clean." The product tested is "Gaia Clean GCT processed cloth." The size is 5×5 cm, and the test was conducted by spreading it along the inner surface of a vial. The test strain is Escherichia coli NBRC 3301. The method for measuring viable bacteria adopted the mixed plate culture method, and the test results, including the number of inoculated bacteria and the number of unprocessed cloth bacteria, are provided. Please take a moment to read through it. [Contents Included] ■ Product Name and Number ■ Quantity ■ Test Items ■ Test Strain ■ Test Method ■ Test Results *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a certificate from the antibacterial test (Gaia provisional method) conducted on the photocatalytic processing liquid "Gaia Clean." The product tested is "Gaia Clean GCT processed fabric (100% cotton)." The test strain is Klebsiella pneumoniae ATCC 4352. Measurements were taken using the mixed culture plate method, and details such as the inoculation count and the number of unprocessed fabric bacteria are included. Please feel free to download and review it. [Contents Included] ■ Product name and number ■ Quantity ■ Test items ■ Test strain ■ Test method ■ Test results *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a test certificate for the measurement of UV shielding rate in the photocatalytic processing liquid "Gaia Clean." The measuring instrument used was the Shimadzu UV-3100PC, with the attached device being the ISR-3100 integrating sphere. Additionally, a UV bandpass filter was also used. Test results are published for both processed and unprocessed fabrics. Please take a look. [Contents] ■ Item number, product name, and color pattern number ■ Test items ■ Test results ■ Notes (measurement conditions, remarks) *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document presents the weight changes during the application of the photocatalytic processing liquid "Gaia Clean." Approximately 20g/m2 of this product was sprayed onto 100% polyester fabric and thoroughly dried at 90°C. (Sample size: 15×20 cm, initial weight: 2.29g) The data compares the weight changes over time with those of other companies' photocatalytic spray liquids for interior processing. Please take a look. [Published Items] ■Elapsed Time ■Gaia Clean ■Other Products *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a certificate from testing the deodorizing properties of the photocatalytic processing liquid "Gaia Clean." Ammonia, acetic acid, formaldehyde, and isobutyric acid were tested using the detection tube method. The sample size was 10cm x 10cm, and a 5-liter Tedlar bag was used as the testing container. The results for the processed fabric of this product and the blank test are listed separately. Please feel free to download and review. [Contents] - Item number, product name, and color pattern number - Test items - Test methods and conditions - Test results - Remarks *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a certificate from the antibacterial efficacy test conducted on the photocatalytic processing solution "Gaia Clean." The test strain used was MRSA (Methicillin-resistant Staphylococcus aureus IID 1677). A UV irradiation device equipped with one blacklight fluorescent lamp was used. The test results include the number of inoculated bacteria and the number of unprocessed bacteria, among other details. Please feel free to download and review it. [Contents Included] ■ Product Name and Number ■ Quantity ■ Test Items ■ Test Strain ■ Test Method ■ Test Results *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a certificate from the antibacterial efficacy test conducted on the photocatalytic processing liquid "Gaia Clean." The test strain used was Staphylococcus aureus ATCC 6538P. The method for measuring viable bacteria was the mixed culture plate method. The test results include the number of inoculated bacteria and the number of bacteria on untreated fabric. Please feel free to download and review it. [Contents Included] ■ Product Name and Number ■ Quantity ■ Test Items ■ Test Strain ■ Test Method ■ Test Results *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a certificate from the evaluation test II b of the photocatalytic performance of the photocatalytic processing liquid "Gaia Clean (GCT-1)." The testing method adopted is the gas bag B method. The test results include the removal rate of acetaldehyde after 20 hours. Additionally, information such as ultraviolet intensity measurements and sample pieces is also included, making it a reference-friendly document. [Contents Included] ■ Product Name and Model Number ■ Quantity ■ Test Items ■ Test Results ■ Remarks *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a certificate from the testing of the deodorizing properties of the photocatalytic processing solution "Gaia Clean." The deodorizing performance testing method adopted the equipment analysis implementation manual (gas chromatography method) based on the certification standards for deodorizing processed products by the Japan Textile Evaluation Technology Association. The test results include the reduction rates at 2 hours and 24 hours, respectively. Please feel free to download and review it. [Contents Included] ■ Item number, item name, and color pattern number ■ Test items ■ Test results ■ Remarks *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a report on the virus inactivation test conducted on the "Gaia photocatalytic processed mask material non-woven fabric." A sample of the product, cut to approximately 3cm x 3cm, was treated with a suspension of influenza virus. After being stored at room temperature under black light exposure and in the dark, the viral infectivity was measured. The test results include the infectivity immediately after inoculation, as well as at 1 hour and 6 hours post-inoculation. [Contents (partial)] ■ Client ■ Sample ■ Test Purpose ■ Test Overview ■ Test Results *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a report on the allergen reaction test conducted for the "Gaia Clean Photocatalytic Mask." Allergen solution was added to the product, and ultraviolet light was irradiated to react with the allergen. The concentration of the allergen in the solution after the reaction was measured to examine the reduction effect on the allergen. Results of allergen quantity measurement using enzyme immunoassay (sandwich ELISA) are included. Please feel free to download and review it. [Contents] ■ Test Name ■ Purpose of the Test ■ Subjects and Methods ■ Protocol ■ Results ■ Summary *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a test report on the virus inactivation effect against the influenza virus using the "Gaia Photocatalytic Processing Mask." The tests were conducted according to the photocatalytic glass adhesion method (JIS R1702). The test results include the time-dependent changes in viral infectivity due to the photocatalytic action. Please feel free to download and take a look. 【Contents (partial)】 ■ Test Purpose ■ Test Requester ■ Testing Organization ■ Test Period ■ Test Virus *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document explains the dirt reduction test for wallpaper coated with the photocatalytic processing liquid "Gaia Clean (GCI-1)." For the wallpaper coated with our product, dirt simulating tobacco was applied, and its decomposition performance was evaluated. Two 20W black lights were set up in parallel and irradiated from a distance of 5 cm to observe the changes in dirt. The experimental results also include images of the coated and uncoated areas. 【Included Items】 ■ Processing Conditions ■ Dirt Conditions ■ Irradiation Conditions ■ Experimental Results *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document presents the results of repeated deodorization tests for photocatalytic processed curtains. To confirm that the photocatalytic processed curtains can continuously remove chemical substances, deodorization tests for formaldehyde were conducted repeatedly. The amount of formaldehyde deodorized is presented in a graph. Please feel free to download and take a look. [Included Items] ■ Formaldehyde Consumption ■ Number of Tests *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document presents the results of indoor air quality measurements after Gaia photocatalytic processing. The property is a total remodeling construction project in a public housing complex in Yokohama City, and the sampling method used is passive sampling. We provide a graph of the measurement results for acetaldehyde and toluene concentrations, which are subject to the Ministry of Health, Labour and Welfare's guideline values. Please feel free to download and take a look. [Contents] ■ Property ■ Measurement Period ■ Sampling Method ■ Acetaldehyde Concentration ■ Toluene Concentration *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

This document is a test report from the reaction test conducted on the allergen of the photocatalytic processing solution "Gaia Clean." The sample used was lace curtains. An allergen solution was added, and ultraviolet light was irradiated to react with the allergen. The concentration of the allergen in the solution after the reaction was measured to examine the reduction effect on the allergen. The results of the allergen quantity measurement using the enzyme immunoassay method (sandwich ELISA) are included. Please take a look. [Contents] ■ Test Name ■ Purpose of the Test ■ Subjects and Methods ■ Protocol ■ Results ■ Summary *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals