タナック List of Products and Services

The medical simulator "VetiSkill" for veterinarians and pet nurses aims to provide an environment where they can easily practice techniques close to those used in clinical settings. Dr. Hiroaki Koshina, the director of the Kyoto AR Animal Advanced Medical Center and a practicing veterinarian, has collaborated with Tanac Co., Ltd., which has over 10 years of experience in developing human medical simulators, to jointly develop this animal medical simulator.

• Other medical supplies and cosmetic manufacturing materials
• Rubber bands and strings

We have numerous OEM order achievements, starting with medical device parts (with Class 4 track record), as well as beauty and health products. Our own factory is fully equipped, and we have a solid mass production system in place. *Clean room available (Class 10,000).

• Rubber

The soft type of 'BUYSSkin', which has been well received, has now been released! The conventional 'BUYSSkin' was designed to target thick and rigid skin areas such as the back and outer thighs. However, 'BUYSSkin soft' is suitable for simulating dermal suturing with small needles on softer and more elastic skin areas like the lower abdomen and face. It prevents cut-outs during buried suturing and realistically reproduces the sensation of tying knots. You can see the trajectory of the needle and thread, as well as understand the tension-reducing effect. *Simulation with barbed sutures is also possible! "We have received feedback that the sensation of suturing and tightening the thread, which could only be experienced with living tissue until now, can now be simulated." [Features] ■ No cut-outs during buried suturing ■ Realistic knot-tying sensation ■ Visibility of needle and thread trajectory ■ Understanding of tension-reducing effect ■ Simulation with barbed sutures is possible *Please feel free to contact us for more details.

• Rubber

The soft type of 'BUYSSkin', which has received great acclaim, has arrived! The conventional 'BUYSSkin' was designed to target thick and rigid skin, such as on the back and outer thighs. However, 'BUYSSkin soft' is suitable for simulating dermal suturing with small needles on softer and more elastic skin, such as the lower abdomen and face. It prevents cut-outs during buried suturing and realistically reproduces the sensation of ligation. You can see the trajectory of the needle and thread, as well as understand the tension-reducing effect. *Simulation with barbed sutures is also possible! "We have received feedback that the sensation of suturing and tightening the thread, which could only be experienced on living tissue until now, can now be simulated." [Features] ■ No cut-outs during buried suturing ■ Realistic ligation sensation ■ Visibility of the needle and thread trajectory ■ Understanding of the tension-reducing effect ■ Simulation with barbed sutures is possible *Please feel free to contact us for more details.

• Rubber

Tanac is a development-oriented creative company that responds to customer needs by integrating innovative materials such as silicone and crystal gel (elastomers) with specialized processing technologies into a composite network. If you have a development plan that utilizes these materials, please consult with Tanac! 【Business Activities】 ■ Sales of silicone products within Japan ■ Processing of silicone and sales of silicone processed products within Japan ■ Processing of crystal gel and sales of crystal gel processed products within Japan *For more details, please download the catalog or contact us.

• Rubber bands and strings

☆ "Punyu-kun" is a cooling pack designed to reduce the pain of injections. ☆ It quickly cools the injection site and dulls skin sensation to alleviate pain during the injection. The part of "Punyu-kun" that touches the skin is made from Tanac's original ultra-flexible gel material, Crystal Gel, which is used in medical settings. By encasing a non-freezing gel (freeze-proof gel) that does not freeze even when cooled in the freezer, it gently fits with a soft touch and quickly cools the injection site. Crystal Gel has a softness similar to that of an earlobe and is made from Tanac's original material that boasts high flexibility and high elasticity.

• OEM Manufacturing Services

At Tanac, we have developed the simulated bone "TANACBONE" through collaborative research with national research institutes and various universities. It is made of a two-layer rigid foam urethane material with different densities, faithfully reproducing the shape based on the biological data of Japanese and Asian individuals. It can be utilized not only for practice in a clinical-like environment but also has significant potential for evaluating implants, medical training and simulations, and the development of surgical instruments. Additionally, we can create and process types tailored to your requests, such as changing densities or providing transparent models. 【Features】 ■ Effective for improving bolt joining techniques ■ Faithfully reproduces shapes based on biological data of Japanese individuals ■ Multi-layer structure that replicates the mechanical properties of cortical and cancellous bone ■ Can be captured in X-rays ■ Extensive custom options available *For more details, please refer to the PDF document or feel free to contact us.

• OEM Manufacturing Services

At Tanac, we sell the simulated bone "TANACBONE," developed in collaboration with national research institutes and various universities. It is made from a two-layer rigid foam urethane material with different densities, faithfully reproducing the shape based on the biological data of Japanese and Asian individuals. It can be utilized not only for practice with a clinical feel but also has significant potential for use in implant evaluation, medical training and simulation, and the development of surgical instruments. Additionally, we can create and process types tailored to your requests, such as changing densities or providing transparent models. 【Features】 ■ Effective for improving bolt joining techniques ■ Faithfully reproduces shapes based on biological data of Japanese individuals ■ Multi-layer structure that replicates the mechanical properties of cortical and cancellous bone ■ Can be captured in X-rays ■ Extensive custom options available *For more details, please refer to the PDF document or feel free to contact us.

• OEM Manufacturing Services

We handle medical-grade silicone from various silicone manufacturers. We can introduce options for short-term, medium-term, and long-term placement. Available for Mirable, injection, and casting. We can assist from material introduction to prototyping and molding. We also mold small-diameter tubes. Molding is done at a factory certified with ISO 13485 for medical device manufacturing, equipped with a Class 10,000 cleanroom.

• Other medical supplies and cosmetic manufacturing materials

We would like to introduce our dermal buried suture simulator, 'BUYSSkin' and 'BUYSSkin soft'. It prevents cut-out during buried suturing and realistically reproduces the sensation of ligation. You can see the trajectory of the needle and thread, as well as understand the effect of tension relief. Additionally, it is possible to simulate suturing with barbed sutures. "We have received feedback that the sensation of suturing and tightening the thread, which could only be experienced with living tissue until now, can now be simulated," we have been told. 【Features】 ■ No cut-out during buried suturing ■ Realistic ligation sensation ■ Visibility of the needle and thread trajectory ■ Understanding of tension relief effects ■ Simulation with barbed sutures is possible Addendum: A soft type has been introduced from the well-received 'BUYSSkin'! While the conventional 'BUYSSkin' was designed for thicker and more rigid skin, such as on the back and outer thigh, 'BUYSSkin soft' is suitable for simulating dermal suturing with small needle and thread on softer and more elastic skin, such as the lower abdomen and face.

• Rubber

The "Punyu-kun" is a cooling pack designed to reduce the pain of injections. It quickly cools the injection site and dulls the skin's sensation to alleviate pain during the injection. The part of "Punyu-kun" that touches the skin uses a unique ultra-flexible gel material called Crystal Gel, which is used in medical settings. By encasing a non-freezing gel that does not freeze even when cooled in the freezer, it gently fits with a soft touch and quickly cools the injection site. Crystal Gel has a softness similar to that of an earlobe and is an original Tanac formulation that boasts high flexibility and high elasticity.

• Rubber

We would like to introduce our dermal buried suture simulator, 'BUYSSkin.' It prevents cut-out during buried suturing and realistically reproduces the sensation of ligation. You can see the trajectory of the needle and thread, as well as understand the effect of tension relief. Additionally, it is possible to simulate suturing with barbed sutures. "We can now experience the sensation of suturing in the dermis and tightening the thread, which was previously only possible with live tissue," is the feedback we have received. 【Features】 ■ No cut-out during buried suturing ■ Realistic ligation sensation ■ Visibility of needle and thread trajectory ■ Understanding of tension relief effect ■ Simulation with barbed sutures is possible *For more details, please refer to the PDF document or feel free to contact us.

• Rubber

By reproducing a multi-layer structure, we have developed a model that realizes the actual suturing sensation and palpation. It has been highly evaluated for its close resemblance to biological tissue, particularly due to its resistance to tearing during ligation and the ability to suture while pulling, which allows for skin wrinkling. 【Features】 ■ Effective for improving suturing techniques ■ High strength that resists tearing during ligation ■ Reproduction of skin wrinkling during suturing

• Rubber

This is a vascular model that closely simulates the sensation during suturing and ligation in clinical settings. It uses a specially formulated gel called "Crystal Gel." - Vascular suturing model - Medical device quantitative evaluation model - Left arm pulsation reproduction model, etc. Customizations are available.

• Rubber

We handle medical-grade silicone from various silicone manufacturers. We can introduce options for short-term, medium-term, and long-term placement. Available for Mirable, injection, and casting purposes. We can assist from material introduction to prototyping and molding. We also mold small-diameter tubes. Molding is done at a factory certified with ISO 13485 for medical device manufacturing, equipped with a clean room class 10,000.

• Rubber

At Tanac, we sell the simulated bone "TANACBONE," developed in collaboration with national research institutes and various universities. It is made of a two-layer rigid foam urethane material with different densities, accurately reproducing the shape based on the biological data of Japanese and Asian individuals. It can be utilized not only for practice with a clinical feel but also has significant potential for evaluating implants, medical training and simulations, and the development of surgical instruments. Additionally, we can produce and process types tailored to your requests, such as changing densities or providing transparent models. 【Features】 ■ Effective for improving bolt joining techniques ■ Accurately reproduces shapes based on biological data of Japanese individuals ■ Multi-layer structure that replicates the mechanical properties of cortical and cancellous bone ■ Can be captured in X-rays ■ Extensive custom options available *For more details, please refer to the PDF document or feel free to contact us.

• OEM Manufacturing Services

We would like to introduce the "Various Organ Models" handled by Tanak. The "Full Version of the Colon" is suitable for training in techniques such as endoscopy, suturing, palpation polyp removal, and closure. The material is silicone (JIS E20°). In addition, we also offer "Lung Models" and "Pancreas Model with Pancreatic Duct" that can be used for suturing and excision. 【Features】 ■ Full Version of the Colon - Specifications: Colon and Rectum Model - Material: Silicone (JIS E20°) - Usage Examples: Endoscopy, suturing, palpation polyp removal, closure technique training *For more details, please refer to the PDF document or feel free to contact us.

• simulator

We would like to introduce custom cases of medical simulators handled by our company. The "transparent torso," which can be created using CT data from Japanese individuals, allows for the fabrication of each organ and skin with a composition that matches the acoustic impedance of human organs. In addition, we offer a "pulsation model" that reproduces pulsation by flowing liquid through blood vessels, and a "multi-layer skin model" suitable for puncture tests and skin compression tests. 【Features】 ■ Transparent Torso - Each organ and skin can be created from CT data of Japanese individuals. - Each organ can be fabricated with a composition that matches the acoustic impedance of human organs. - Usage examples: Phantom for ultrasound echo, evaluation of pressure on garments, etc. *For more details, please refer to the PDF document or feel free to contact us.

• simulator

The "Marsa Gel for Electric Scalpel" is a sheet with an electrical resistance value close to that of human organs (below 70kΩ). It provides a usage feel similar to that during surgery. It has less unpleasant odor commonly found in electric scalpel-compatible products, and custom options for heat discoloration models are available. Additionally, the skin layer model comes with a skin layer approximately 0.7mm thick on one side, allowing for suturing and peeling. 【Features】 ■ Sheet with an electrical resistance value close to human organs (below 70kΩ) ■ Less unpleasant odor commonly found in electric scalpel-compatible products ■ Custom options available for heat discoloration models: turns white upon heating (reversible) ■ Skin layer model: allows for suturing and peeling with a skin layer approximately 0.7mm thick on one side ■ No moisture needed for storage; sealing in a zip bag is sufficient *For more details, please refer to the PDF document or feel free to contact us.

• simulator

Introducing the "CRG Suturing Model," ideal for practicing suturing, ligation, and anastomosis. Made from a special gel (crystal gel) that closely resembles the softness of human tissue. It minimizes avoidance during suturing and ligation, and being a dry model, it allows for easy storage. The "CRG Suturing Pad" contains various three-dimensional shapes within an 8cm square sheet, enabling numerous suturing practice opportunities with just one pad. 【Features】 - Made from a special gel (crystal gel) that closely resembles the softness of human tissue - The sensation during suturing and ligation is close to clinical practice - CRG Suturing Pad - Contains various three-dimensional shapes within an 8cm square sheet, allowing for numerous suturing practice opportunities *For more details, please refer to the PDF document or feel free to contact us.

• simulator

We would like to introduce the "Two-Layer Intestinal Suturing Model" handled by Tanac. Made of a special gel (crystal gel) that closely resembles the softness of human tissue. In addition to single-layer suturing, it also allows practice for two-layer suturing, such as layer-by-layer suturing, and can be customized for hardness, color, etc. Please feel free to consult us when you need assistance. 【Lineup】 ■ Intestinal Suturing Large Intestine Two-Layer Model ■ Intestinal Suturing Small Intestine Two-Layer Model ■ Intestinal Suturing Hemosuke Model ■ Suturing Base *For more details, please refer to the PDF materials or feel free to contact us.

• simulator

We would like to introduce the "Single-Layer Tube Model" handled by Tanac. Made from a special gel (crystal gel) that closely resembles the softness of human tissue. The sensation during suturing and ligation is similar to clinical practice, and customization options for hardness, color, etc., are available. Please feel free to consult us when you need assistance. 【Lineup (Excerpt)】 ■ Intestinal Suture Standard Model Long (Hard) ■ Intestinal Suture Standard Model RED Long (Soft) ■ Jejunum and Esophagus Suture Standard Model RED Long (Soft) ■ Vascular Suture (Fine) ■ Intestinal Suture U-Shaped Type Model RED (Soft) ■ Suture Base *For more details, please refer to the PDF materials or feel free to contact us.

• simulator

We would like to introduce our dermal buried suture simulator, 'BUYSSkin.' It prevents cut out during buried suturing and realistically reproduces the sensation of ligation. You can see the trajectory of the needle and thread, as well as understand the tension-reducing effect. Additionally, it is possible to simulate suturing with barbed suture. We have received feedback stating, "The sensation of suturing in the dermis and tightening the thread, which could only be experienced in living tissue until now, can now be simulated." 【Features】 ■ No cut out during buried suturing ■ Realistic ligation sensation ■ Visible trajectory of the needle and thread ■ Understandable tension-reducing effect ■ Simulation with barbed suture is possible *For simulations of dermal suturing performed with small needle and thread on soft, extensible skin such as the lower abdomen or face, please purchase 'BUYSSkin soft' (sold separately)! *For more details, please refer to the PDF document or feel free to contact us.

• simulator

Suppressing droplets during endoscopic examinations has become a significant challenge in the medical field. "Masupita (for endoscopy)" is designed based on ergonomic principles, taking the environment into consideration, and can be used as one of the sustainable droplet suppression measures. The combination with a transnasal endoscope that has a low gag reflex and the ability to use it with gauze is considered a major advantage. 【Features】 ■ Reduces droplets during endoscopic examinations ■ Washable and disinfectable for repeated use ■ Crystal gel fits the skin *For more details, please refer to the PDF materials or feel free to contact us.

• mask

"EASY" is an endoscopic treatment simulator that allows endoscopists and assistants to practice easily using a dry lab, which does not involve biological tissues. It reproduces a realistic feel with a unique material blend and special shapes, enabling easy training with simple setup. Please use it effectively as an educational tool and explanatory material. [Features] - Training for polypectomy and suturing techniques - Reproduces a realistic feel with a unique material blend and special shapes - Enables easy training with simple setup *For more details, please refer to the PDF materials or feel free to contact us.

• others

Hardness refers to the value obtained by measuring the hardness or softness of materials such as rubber and sponge using a device called a durometer. There are several types of durometers that correspond to the hardness of the object being measured, with commonly used types being Type A, Type E, and Type D. Our company proposes thermoplastic elastomers and silicone RTV and Mirable as low-hardness materials. We have successful case studies of applications such as packing for respiratory devices, foot pressure point massage, and taping, all implemented with low hardness. [Original Formulation Materials] ■CRYSTAL GEL ■TOUGHSiLON ■MEDIPUR *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Laceration Evaluation Finger Dummy" is a dummy designed to simulate human fingers in narrow spaces, such as those found in machines like robots or furniture, to check whether lacerations may occur. It allows for safety evaluation and confirmation of the potential risk of lacerations based on the presence of cracks or injuries. This product has been developed by the Panasonic Corporation Product Analysis Center, and we are entrusted with its manufacturing and sales. 【Features】 ■ Simulates human fingers to check for potential lacerations ■ Allows for safety evaluation and confirmation of the risk of lacerations based on the presence of cracks or injuries ■ Developed by the Panasonic Corporation Product Analysis Center, with manufacturing and sales entrusted to us *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

We handle medical-grade silicone from various silicone manufacturers. We can introduce options for short-term, medium-term, and long-term placement. Available for Mirable, injection, and casting purposes. We can assist from material introduction to prototyping and molding. We also mold small-diameter tubes. Molding is done at a factory certified with ISO 13485 for medical device manufacturing, equipped with a clean room class 10,000.

• Rubber

Due to the spread of the novel coronavirus infection in Japan, Medtec Japan 2020 (March 16-18 @ Tokyo Big Sight) has been postponed, and we are introducing the products that were scheduled for display. We appreciate your understanding. Tanac Co., Ltd. conducts contract processing of medical device parts at a factory dedicated to medical use. By using a uniquely formulated gel material, we reproduce a texture that is as close to biological tissue as possible, with flexibility and a moist tactile feel. In addition to simulators for quantitative evaluation by medical device and measurement instrument manufacturers, our products are actively used for sales promotion and conference display simulators, as well as educational simulators for improving the skills of doctors and nurses. [Introducing Scheduled Exhibits] ■ Medical Simulators - Vascular Model - Bone Model - Evaluation Parts Model - Intestinal Suture Model - Left Arm Pulsation Reproduction Model - Energy Device Practice Model (Marsa Gel) ■ Hardness Measuring Instrument (for Cosmetics and Food Industry) - Soft Gram *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing

We perform molding processing of soft, low-hardness silicone elastomers that have a pleasant texture. Production is carried out at a domestic factory that manufactures medical supplies. Additionally, we also accommodate prototypes and small lot products. Please feel free to contact us. 【Features】 ■ Molding manufacturer of medical silicone elastomers ■ Capable of handling prototypes and small lot products ■ Uses soft, low-hardness materials ■ Unique material formulations tailored to your needs ■ Special grade materials for medical and food containers, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing

The fork-type soft center "SOFTGRAM" is a fork-type soft sensor that easily quantifies the previously ambiguous sensation of "softness." Utilizing the principle of a tuning fork that continuously emits sound without changing at a specific frequency through "EVERTONE SENSING," it allows anyone, anywhere, at any time to accurately quantify the softness of skin, muscles, and food (including tofu) easily. Additionally, its compact handheld size makes it easy to carry, enabling direct hardness measurement on-site. 【Features】 ■ Visualizes and manages the softness sensation that only experts can discern ■ Measurement values are based on the physical quantity of Young's modulus, allowing for quantitative comparison and analysis ■ Measurement principles based on physical laws enable comparison and analysis of different materials using the same standard ■ Excellent portability design allows for instant measurement at the desired location ■ Equipped with a user support function that enables anyone to measure with high accuracy *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Do you have any of the following requests or concerns? ◆ Soft silicone products are prone to tearing, making commercialization difficult... ◆ There are products with elasticity, but distortion cannot be improved... ◆ I want products that feel like human skin or are soft... ◆ I want to know about materials that are low in hardness and highly safe for the human body... ◆ I am concerned about the stickiness of soft products... We will expand the possibilities of soft products with our unique material formulations and processing technologies. Please consult with Tanac, who specializes in ultra-flexible gel materials! 《Examples of successful implementations achieved by lowering hardness (partial introduction)》 ✔ Respiratory packing ⇒ Improved air leakage by conforming to the contours of the face! ✔ Taping ⇒ Provides some range of motion while not being overly restrictive! *For more details, please refer to the PDF document or feel free to contact us.

• Rubber

The "Mewarm" is a highly extensible robotic arm that combines lightweight design and high output by modularizing wire interference drive, equipped with a glove that has an elongation rate of 1300%. 【Key Points】 ■ Highly extensible glove that does not hinder the movement of the fingertips ■ The elongation rate of the glove's ultra-flexible gel material is 1300%! ■ Soft and stretchy, making it suitable for delicate items and reducing strain on the motor *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"Crystal Gel x Original Design Gripper" is a product developed by Yatoyama Proceed Co., Ltd., which specializes in the production of various types of robotic hands, and our company, which produces ultra-flexible gel materials. Made from soft materials of various hardness levels, it allows for handling of irregularly shaped objects without causing any damage. ★ Safety of the materials is guaranteed, including compliance with "Food Sanitation Packaging Container Standards" and "Primary Skin Irritation Tests." 【Features】 ■ Can grip irregularly shaped objects due to the "ultra-flexible gel material" ■ Usable on production lines in food factories due to compliance with food sanitation packaging container standards ■ Simply replace the "Crystal Gel" when it gets dirty. Maintenance and cleaning are easy. *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

Are you having any issues with the silicone products or silicone parts you are currently using? Our uniquely formulated low-hardness, high-strength silicone "Tough Silon" may be able to solve your problems. ■ Compatible with JIS E10° and above ■ Tear strength: 4.0 N/mm, Tensile strength: 0.9 MPa ■ Made from materials that have passed ISO 10993 biocompatibility testing ■ Many achievements in medical device parts and healthcare products If you are looking for flexibility, adhesion, or stretchability, please feel free to contact us.

• Other polymer materials

Do you have any of the following requests or concerns? ◆ Soft silicone products are prone to tearing, making commercialization difficult. ◆ There are products with elasticity, but distortion cannot be improved. ◆ I want a product that is soft like human skin. ◆ I want to know about materials that are low in hardness and highly safe for the human body. ◆ I am concerned about the stickiness of soft products. We will expand the possibilities of soft products with our unique material formulation and processing technology. We can accommodate from prototypes to small and large lots! If you would like a sample, please clearly state 'Sample Request' along with your intended use and any concerns, and contact us. (Note: Samples are limited in quantity and may be declined. Thank you for your understanding.)

• Rubber

Tanac is a development-oriented creative company that responds to customer needs by integrating novel materials such as silicone and crystal gel with specialized processing technologies into a composite network. If you have development plans that utilize these materials, please consult with Tanac! 【Business Activities】 ■ Sales of silicone products in Japan ■ Processing of silicone and sales of silicone processed products in Japan ■ Processing of crystal gel and sales of crystal gel processed products in Japan *For more details, please download the catalog or contact us.

• others

When practicing skin suturing using a medical "skin model" simulator, do you have any of the following concerns? "High costs limit the number of people who can practice" "Easy to tear during suturing and ligation, making practice difficult" "Low reproducibility of skin raises doubts about the effectiveness of practice," and so on. At Tanak, we can manufacture products with quality close to real-life scenarios based on Young's modulus data for the stratum corneum, epidermis, dermis, and subcutaneous tissue. We can customize models from simple sheet forms to include surrounding parts according to your needs. *For more details, please download the PDF or feel free to contact us.

• Other polymer materials

Are you experiencing any of the following issues with overseas-made simulation bones? - "The simulation bone is too large (foreign size)" - "There is no simulation bone with the desired density" - "Defective products are mixed in" - "Custom options are not available," etc. At Tanak, we reproduce shape, density, and strength based on data from Japanese individuals. In addition to catalog products, we also offer custom options starting from one piece. *For more details, please download the PDF or feel free to contact us.

• Other polymer materials

Are you experiencing any of the following issues with your current electric scalpel simulator? "I am concerned about the odor during use." "It is troublesome to store it in water." "If I don't change the water for storage, it gets moldy." "I want to practice not only cutting but also peeling techniques." At Tanac, we have developed a completely different material for electric scalpel simulators, enabling easy storage, odor reduction, and support for peeling technique practice. *For more details, please download the PDF or feel free to contact us.

• Other polymer materials

Are you facing any of the following issues with your robotic arm (hand)? - "Soft products get scratched..." - "Irregularly shaped products are difficult to grasp..." - "Products slip when trying to grip them..." At Tanac, we can manufacture [arm covers] made of low-hardness materials to solve these problems through OEM. We accept orders starting from a single piece or prototypes. Please feel free to consult with us! *For more details, please download the PDF or feel free to contact us.

• Other polymer materials

◎High-quality ultrasound images close to biological tissues can be obtained. ◎Different echo values are set for each organ. ◎The softness of biological tissues is also reproduced. ◎As a custom-made product, it can be manufactured in your desired shape. Joint research with Gifu University *For more details, please download the PDF or feel free to contact us.

• Other polymer materials

Tanac's "Crystal Gel" is a proprietary material that has passed biocompatibility testing. It possesses the characteristics of thermoplastic elastomers. It is compatible with injection, extrusion, pressing, and composite processing. 【Features】 ■ Passed biocompatibility testing ■ Proprietary material ■ Characteristics: Thermoplastic elastomer ■ Processing methods: Injection, extrusion, pressing, composite *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

A material that is as close to a liquid as possible and can maintain its shape after molding is called a gel. "Tough Silon Gel®" is a unique silicone rubber that significantly improves upon the strength of conventional silicone rubber. It allows for ultra-low hardness three-dimensional molding. 【Features】 - Excellent heat resistance (200°C), cold resistance (-40°C), weather resistance, and electrical insulation - Resistant to tearing and highly flexible - Quickly returns to its original size without distortion after repeated stretching - Hygienic and gentle on the human body For more details, please contact us or download the catalog.

• Rubber

A material that is as close to a liquid as possible and can maintain its shape after molding is called a gel. "Medipure Gel®" is a super low-hardness polyurethane product primarily used for medical simulation organs. It enables the creation of surfaces with significantly improved stickiness. 【Features】 ○ Heat resistance (70°C) and cold resistance (-30°C) ○ Very soft three-dimensional molding is possible even for non-medical applications ○ Moisture feel For more details, please contact us or download the catalog.

• others