アーカイブティップス List of Products and Services

PortaLite is a portable single-channel NIRS system with a sensor part that has a light-emitting/receiving section and a main unit equipped with a battery, which are separated from each other. The data measured by the sensor part is sent to the main unit connected by a cable, and can be transferred to a laptop via Bluetooth for real-time monitoring. The independence of the sensor part from the main unit allows for attachment and measurement on various parts of the body. Muscle activity NIRS measurements can be performed in various locations and situations, such as on the neck and shoulders, or on the waist and thighs when sitting on a seat.

• others

The motion capture camera Miqus, designed with a compact body that inherits the performance of the Oqus series, measures not only walking and sports but also provides high-precision data in real-time for various applications such as industrial 3D measurement, VR, and CG production.

• Other physicochemical equipment
• High Speed Camera

The portable force plate has a built-in amplifier, making it easy to carry and allowing measurements to be taken in various locations. Additionally, by using an external amplifier, analog output becomes possible, enabling real-time synchronization with external devices such as motion capture systems. The portable force plate allows for measurements to be taken on-site.

• 3D measuring device
• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

COMETA's walking analysis software "Wave Walk" is an easy-to-use walking analysis tool that utilizes the small wireless inertial sensor "Wave Walk." Measurement is simply done by attaching the approximately 5g inertial sensors to the toes of both feet and walking. The data measured by the sensors is transmitted to a dedicated receiver and saved on a laptop. Since the sensor is ultra-lightweight at 5g, the subject does not feel any discomfort from wearing it, and being wireless allows for free movement without being restricted to a measurement area.

• others
• Other measurement, recording and measuring instruments

The optical motion capture system "Qualisys" outputs high-precision 3D positional data in real-time. By using SDKs and other tools to provide feedback to drones and robots, it can be utilized for control purposes.

• others
• 3D measuring device
• Other measurement, recording and measuring instruments

The Qualisys camera series has low latency from the data captured by the camera to the output to third parties, making it very suitable for real-time applications. Qualisys provides the necessary SDKs for development, such as for MotionBuilder and Unity, free of charge, and they can be referenced as open source on GitHub. The Qualisys system, with its low latency characteristics and free Unity SDK, is very well-suited for real-time linking with virtual goggles like the Oculus Rift.

• others

The OxyMon (Octamon) brain function mapping/imaging device is a basic type of brain function mapping/imaging NIRS system from artinis, which is central to their NIRS products. Using near-infrared spectroscopy, it allows for non-invasive real-time observation of the oxidation displacement data of hemoglobin contained in cerebral blood flow. It enables real-time observation of brain activity during operator tasks or when a driver is maneuvering machinery.

• Other measurement, recording and measuring instruments
• others
• Spectroscopic Analysis Equipment

The portable brain function mapping/imaging device 【OctaMon】 is a highly portable brain function mapping/imaging NIRS system from artinis that excels in mobility. 【OctaMon】 uses near-infrared spectroscopy to non-invasively observe real-time data on the oxidation displacement of hemoglobin contained in cerebral blood flow. It consists of an 8-channel (2×4) sensor that covers the prefrontal cortex, and the subject wears a headband with the sensors attached for measurement. The measured data is transmitted via Bluetooth from a small transmitter to a control notebook PC, providing feedback to researchers. Subjects can observe brain activity in a more natural state without being restrained by cables or other equipment.

• Other measurement, recording and measuring instruments
• others
• Spectroscopic Analysis Equipment

Oqus Underwater is a groundbreaking camera that enables optical motion capture underwater. Its specifications are nearly equivalent to those of the Oqus Standard camera, allowing for high-precision data output even with fast movements, just like the Standard camera series. Naturally, the measurement subjects only need to have reflective markers attached, making it less burdensome and allowing for measurements in a natural state. It is effective for data acquisition in motion analysis of swimmers, behavior of underwater robots, and operational verification of industrial equipment used underwater.

• 3D measuring device
• Other physicochemical equipment
• Analytical Equipment and Devices

Visual3D is a globally recognized three-dimensional motion analysis software in the field of biomechanics that allows for the creation of biomechanical models, data analysis, and report generation based on measurement data obtained from a three-dimensional motion analysis system. Users from various fields such as rehabilitation, neuroscience, engineering, robotics, sports (performance, injury prevention), and orthopedics utilize it. By using Visual3D, you can fully analyze data obtained from your existing motion capture system and maximize the potential of that data.

• 3D measuring device

Four strain gauge sensors measure floor reaction forces and moments, and from that information, calculations such as the Center of Pressure (COP) are derived. The force plate manufactured by Bertech performs signal adjustment, A/D conversion, and correction processing within the main unit, transmitting measurement data in digital format from the force plate to the amplifier, and outputting analog signals to external devices such as control computers or motion capture systems, eliminating noise and signal degradation that may occur during cable transmission from the force plate to the amplifier. Additionally, a high latency of 2ms is ensured for data output.

• Other measurement, recording and measuring instruments
• others

Oqus MRI is a motion capture camera that has been shielded to allow for safe and noise-free measurements in environments such as high magnetic field MRI rooms. Of course, not only the camera but also the cables connected to the camera and the materials of the calibration kit are important. At Qualisys, we manufacture cables and calibration kits using materials like fiberglass to ensure they can be used without issues in MRI rooms. This system enables the acquisition of 3D motion data synchronized with brain activity by using it in conjunction with fMRI.

• 3D measuring device
• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

Mini Wave Infinity UnderWater is a logger-type electromyography sensor designed specifically for underwater use. The sensor is equipped with a special waterproof coating, allowing it to maintain the same accuracy and functionality as the ground-based Mini Wave Infinity while being used underwater. The sensor itself is very lightweight at just 7g, making it almost unnoticeable when worn. Additionally, the sensor includes an accelerometer, enabling simultaneous measurement of both electromyography and acceleration. Furthermore, by using a dedicated trigger button, you can remotely start and stop measurements. Mini Wave Infinity UnderWater enables the acquisition of high-precision electromyography data underwater.

• Data Logger
• Other measurement, recording and measuring instruments

The Oqus Video series Oqus 210c can measure data in complete synchronization with other Oqus motion capture cameras and is capable of outputting video during measurement in color. Additionally, it can be calibrated with motion capture cameras, allowing for the verification of 3D data overlaid on video footage. It supports high-speed measurements of up to 750fps. This camera is effective for those who want to use actual video as a reference, in addition to motion capture data during measurement.

• High Speed Camera

The tracking software Qualisys Track Manager, which centrally controls QUALISYS motion capture Oqus cameras, seamlessly operates from tracking to analysis. With intuitive operation, anyone can easily obtain high-precision data. Additionally, we provide licenses for each facility, allowing you to install and use it on as many PCs as needed.

• 3D measuring device