神戸機材 List of Products and Services

Introducing the "Waterproof Robot Cover" handled by Kobe Equipment Co., Ltd. We have selected a PVC material fabric that specializes in dirt resistance, water resistance, and strength. It is suitable for outdoor use for extended periods. To allow for easy attachment and detachment, standard Velcro is used at the split parts, and it can be washed and reused when dirty. 【Features】 ■ Selected PVC material fabric specializing in dirt resistance, water resistance, and strength ■ Suitable for outdoor use for extended periods ■ Standard Velcro used at the split parts ■ Washable and reusable *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Radiant Heat Protection Robot Cover" handled by Kobe Equipment Co., Ltd. Considering wear resistance and heat resistance, we have chosen aramid fibers. Heat-resistant Velcro is used in the detachable parts for easy attachment and removal. Since the frequency of arm exchanges is high, we place particular emphasis on a design that is easy to attach and detach. Please feel free to consult us when you need assistance. 【Features】 ■ Consideration for wear resistance and heat resistance ■ Selection of aramid fibers ■ Use of heat-resistant Velcro in detachable parts ■ Special emphasis on an easy-to-attach and detach design *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the 'Waterproof Robot Cover (Food Sanitation Law Compliant)' handled by Kobe Equipment Co., Ltd. It is environmentally friendly, lighter compared to PVC products, strong in low temperatures, and complies with the Food Sanitation Law (Ministry of Health, Labour and Welfare Notification No. 201). The operating temperature range is from -30°C to 50°C, and it is a non-PVC, non-flame-retardant type. It can be used in food factories, in low-temperature environments, as well as for waterproof covers and dust prevention covers. Please feel free to consult us when you need assistance. 【Features】 ■ Non-PVC, non-flame-retardant type ■ Base fabric: 100% polyester, Resin: polyolefin ■ Environmentally friendly, lighter compared to PVC products, strong in low temperatures ■ Operating temperature: -30°C to 50°C ■ Complies with the Food Sanitation Law (Ministry of Health, Labour and Welfare Notification No. 201) *For more details, please refer to the PDF document or feel free to contact us.

• others

Features of Our Insulation Jacket "Temp Shield(R)" and Case Studies Temp Shield(R) is designed with suitable shapes and materials for the target objects, allowing for energy savings and loss prevention in steam piping and heat exchangers, reduction of heating time in extruders, prevention of burns, and measures against freezing in winter. 【Featured Case Studies (Excerpt)】 - Steam piping - Horizontal heat exchangers - Baking machines - Flanges *You can view the case studies by downloading the PDF.

• Machinery and equipment installation/dismantling/relocation

Robots and peripheral devices in manufacturing environments are exposed to various threats such as friction, sparks, and chemicals. To protect your equipment from these physical threats, we offer a lineup of covers based on suitable materials and shapes tailored to specific applications, known as the Smart Shield System. We can also create custom covers that can be "precisely installed and removed" due to their made-to-order nature. 【Features】 ■ We select materials to protect your robots and other equipment from friction, sparks, heat, and various other physical threats based on their intended use, and create covers accordingly. ■ Easy to attach and detach, making maintenance simple. ■ In addition to covers that completely enclose the robot, we can create custom shapes that cover only the necessary areas, tailored to specific applications. *For more details, please feel free to contact us.

• Other safety and hygiene products

The "Heat Shield" solves the thermal issues of industrial robots that play an active role in smart factories. With this product, robots are protected from internal and external heat, such as that from the robot body and welding operations, thereby enabling the entire smart factory to function smoothly. We offer shields that cover the entire robot as well as pinpoint shields that cover specific areas such as the arm and motor. Additionally, we have a variety of fabrics available for different applications, so please feel free to consult us about any issues you are facing. [Features] ■ Protects robots from internal and external heat ■ Enables the entire smart factory to function smoothly *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Piping Materials

"Jabara" is a tool used as a protective component for parts. It is used to accommodate various elements such as dust, water, oil, heat, and vibration. Its features include the ability to stretch, bend, and change angles, and it is lightweight, making it easy to handle. It is used to cover the vibrating surfaces of machines that require high precision, with the aim of managing the inherent accuracy of the machinery. There are numerous shapes and material specifications available, and we can manufacture Jabara that suits your application. [Features] - Excellent flexibility - Freedom in material selection - Customizable dimensions and structure *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Piping Materials
• tube

The "Telescopic Cover" is a telescopic cover for the maintenance and safety of machine tools. It is an essential component for NC-controlled machine tools, machining centers, NC lathes, and more. When the machine is in operation, a large amount of chips made of iron, cast iron, aluminum, glass, and resin are violently scattered. This product protects the sliding surfaces from these chips and cutting fluids. It compresses to a small size and extends to a large size, moves quickly without making noise, and smoothly eliminates fine chips even though it is thin. In addition to telescopic covers, we also handle general sheet metal processing. We can accommodate short delivery times and small lot sizes. 【Features】 ■ Protects sliding surfaces from chips and cutting fluids ■ Compresses to a small size and extends to a large size ■ Moves quickly without making noise ■ Smoothly eliminates fine chips even though it is thin ■ Accommodates short delivery times and small lot sizes *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Piping Materials

Our "Cable Shield" is a high-performance fabric cover designed to protect the wiring (cables) of robotic machinery from physical threats such as friction, sparks, and chemicals. By preventing cable breakage, it helps to avoid damages caused by troubles on the manufacturing line, thereby improving and stabilizing productivity. We offer a variety of fabrics tailored to different applications, allowing for safe use in various situations. Additionally, its detachable design makes it easy to remove during maintenance. Since we manufacture in-house, we can accommodate short delivery times and small production runs. Please feel free to consult us. 【Features】 ■ Protects against physical threats ■ Prevents damages caused by troubles on the manufacturing line ■ Improves and stabilizes productivity ■ Easy to remove during maintenance ■ Accommodates short delivery times and small production runs *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials
• Other cable related products

The thermal insulation cover "Temp Shield" is custom-made by directly measuring the target object and selecting materials suitable for its shape and purpose, achieving a perfect balance between adhesion and usability while realizing significant energy-saving effects. As the surface temperature of the equipment decreases, it also helps prevent burns for operators. Furthermore, in summer, it reduces environmental temperature through insulation, and in winter, it contributes to faster startup of machinery and maintenance of equipment temperature due to the added heat retention effect. 【Features】 ■ Easy to attach and detach the thermal insulation cover! ■ Covers can be made to fit the target object perfectly, reducing heat loss! ■ Capable of accommodating a wide range from low to high temperatures! 【Examples of Target Objects】 Steam piping / Extruders / Heat exchangers / Outdoor pumps / Other equipment at risk of condensation or freezing *For more details, please contact us or download the PDF.

• Other work tools
• Wiring materials
• Cushioning material

"Temp Shield" is an insulation jacket that can be easily attached to machines and equipment where it is difficult to install insulation materials, demonstrating high energy-saving effects. By conducting thorough on-site hearings for production, it allows for the selection of materials and shapes tailored to specific applications, making it possible to meet a wide variety of requests. During implementation, effectiveness is also estimated through comparative photography using thermal imaging cameras. ★ We are currently offering a collection of case studies that have overcome challenges and troubles with this product. ★ For more details, please download and view from the button below. 【Overview of Problem-Solving Cases】 ■ Resolution of injuries and dissatisfaction (installation and removal of glass wool insulation sheets) ■ Prevention of freezing (failure of built-in sensors) ■ Hazard prevention and energy-saving measures (temperature rise of machinery) ■ Measures against condensation, freezing, and bursting (manufacturing lines, pumps, and piping) * For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other work tools
• Wiring materials
• Cushioning material

This is a case study introducing the winter freeze prevention solutions for a certain paint manufacturer. The company consulted us regarding condensation prevention on their indoor manufacturing line, and they introduced Temp Shield to the target tank in early spring. Despite facing significant temperature differences during the summer, condensation was remarkably reduced. After confirming the effectiveness of Temp Shield, they also sought advice on freeze prevention for the winter. The factory, located in a mountainous area, faced issues in winter (-4°C) where outdoor water supply pumps and pipes would burst, leading to leaks and spending a lot of time on repairs. 【Solution】 <Similar to condensation prevention, the introduction of "Temp Shield" for freeze prevention> ■ Insulate exposed pumps and create a situation where wind does not directly hit the water supply pumps. *For more details, please refer to the catalog or feel free to contact us.

• others

This is a case study on energy conservation and environmental measures from a certain factory (Osaka City) that processes, manufactures, and sells chemical products, synthetic resins, and their products. The cover of the extruder becomes very hot, creating a dangerous situation where workers could get burned, and the workplace becomes quite hot during the summer, leading to poor working conditions. 【Solution】 <Introduction of Insulation Jacket "Temp Shield"> ■ Made from materials with high thermal insulation, heat resistance, and durability ■ Easy to remove (simple to put on and take off, reusable) ■ Safety measures (ensuring worker safety) *For more details, please refer to the catalog or feel free to contact us.

• others

This is a case study of a certain food factory in the Kanto region regarding a malfunction of the internal sensor in a pump. During the summer, water is circulated by a pump for sprinkling to cool the roof of the building, but in winter, the moisture inside the pump freezes, causing the internal sensor to malfunction. Although the area was surrounded by metal sheeting, it could not prevent the issue, and the cost was high due to the need for replacements each time a malfunction occurred. 【Solution】 〈Installation of the thermal jacket "Temp Shield"〉 ■ The heavy metal cover made it difficult to work alone, but Temp Shield can be installed even in complex shapes. ■ It is detachable, allowing for repeated use according to the season. ■ Made of lightweight material, it can be easily attached and removed by one person. *For more details, please refer to the catalog or feel free to contact us.

• others

This is a case study introducing a solution to the maintenance work issues of the self-manufactured steam energy-saving device "Bison Cyclone" from Uchigai Special Engineering Co., Ltd., which manufactures and sells dyeing-related machinery and energy-saving equipment. Currently, glass wool and aluminum glass cloth are wrapped around the Bison Cyclone and secured with wire mesh. During maintenance, these materials are removed each time, and after the work is completed, the insulation material is reattached. This process has led to complaints about poor workability, such as glass wool fibers sticking into hands and causing itching, and difficulties in re-wrapping neatly. **Solution** *Introduction of the insulation jacket "Temp Shield"* - The insulation jacket "Temp Shield" is secured with Velcro and glass strings, making the repeated attachment and detachment of insulation material easy. - It allows for comparison before and after the jacket is applied using a thermal imaging camera, as well as rough estimates of the insulation effect. *For more details, please refer to the catalog or feel free to contact us.*

• others

The thermal insulation jacket "Temp Shield" is an easy-to-remove thermal insulation product developed based on design and sewing technology cultivated over 50 years of insulation work on marine diesel engines. 【Features】 ■ Achieves significant energy savings with high adhesion! ■ Improves durability across all temperature ranges with unique sewing technology ■ Enhances durability by selecting materials suitable for each part ■ Designed to fit the shape of the target object, making it easy to remove and attach during maintenance *The catalog is a digest version. *If you would like case studies or technical data, please contact us and specify "Catalog request."

• Composite Materials
• Machinery and equipment installation/dismantling/relocation

The thermal insulation cover "Temp Shield" is custom-made by directly measuring the target object and selecting materials suitable for its shape and purpose, achieving a balance between close fit and usability while realizing significant energy-saving effects. The surface temperature of the equipment decreases, which also helps prevent burns for operators. Furthermore, in summer, it reduces the ambient temperature through insulation, and in winter, it additionally contributes to maintaining the temperature of the equipment, leading to faster startup of machinery. 【Features】 ■ Easy to attach and detach the thermal insulation cover! ■ Covers can be made to fit the target object perfectly, reducing heat loss! ■ Capable of accommodating a wide range from low to high temperatures! 【Examples of Target Objects】 - Steam piping - Extruders - Heat exchangers - Outdoor pumps - Other equipment at risk of condensation or freezing *For more details, please contact us or download the catalog.

• Other work tools
• Wiring materials
• Cushioning material

TempShield is an easy-to-remove insulation product developed based on the design and sewing technology cultivated through our 50 years of experience in marine diesel engine insulation work. We take direct measurements of the target object and select the most suitable materials for its shape and purpose, allowing us to create completely custom-made products. This enables us to achieve significant energy-saving effects while ensuring both adhesion and ease of use. We have already received over 1,700 orders for various applications, including insulation for machinery inside and outside factories, condensation prevention, freeze prevention, and noise reduction. ● For more details, please download and view the catalog. ● If you would like a detailed catalog, please request it.

• Other work tools

The thermal insulation cover "Temp Shield" is a product developed based on design and sewing technology cultivated through 50 years of insulation work on marine diesel engines. It is easy to attach and detach, making it a convenient thermal insulation solution. We take precise measurements of the target object and select the most suitable materials for its shape and purpose, allowing us to create completely custom-made products that achieve significant energy savings while ensuring close fit and usability. We have already received over 1,700 orders for various applications, including thermal insulation of machinery both inside and outside factories, as well as condensation prevention, freeze prevention, and noise reduction. 【Features】 ■ Easy to attach and detach the thermal insulation cover! ■ Custom covers that fit perfectly to the target object, reducing heat loss! ■ Wide compatibility from low to high temperature ranges! 【Examples of Target Objects】 - Steam piping - Extruders - Heat exchangers - Outdoor pumps - Other devices at risk of condensation or freezing *For more details, please contact us or download the catalog.

• Other work tools
• Wiring materials
• Cushioning material

~ Introduction of Kobe Equipment's Insulation and Heat Retention Cover "Temp Shield" ~ 【Features】 - Stronger and carefully selected materials. - Achieves cost reduction by thoroughly applying the right materials in the right places. - Easy to remove. - Contributes to the prevention of labor accidents by reducing contact with high-temperature parts. === Custom-made production is also available === Kobe Equipment's insulation and heat retention covers are generally made to order. Our staff will manufacture them according to the size, structure, and work of each facility. ● For more details, please download and view the catalog.

• Other packaging materials

~Strong against shocks and excellent durability. Introducing the Car Stopper~ Easy to install! Options and special items are also available. *For more details, please download and view the catalog. [Applications] Protection material for truck terminal aprons Protection material for truck bed walls Shock-absorbing material for embankments, piers, and levees Shock-absorbing material for ships Shock-absorbing material for dock shelters

• Ceramics

Soft Lagging is a precision lagging method for marine and land diesel engine turbines (superchargers), exhaust pipes, intake pipes, etc., utilizing Kobe Equipment's unique processing and molding technology, which significantly improves energy efficiency. 【Features】 ■ Compatible with all high-temperature parts and various shapes ■ Effective in preventing oil spillage in compliance with SOLAS regulations ■ Delivered as pre-formed products 　→ Easy installation on-site 　→ Cost reduction and improved adhesion due to shortened work time 　→ Enhanced product quality through improved appearance ■ Custom orders for cut products, raw materials, etc., are also available upon request *For more details, please contact us or download the catalog.

• others

Kobe Equipment handles various products that contribute to improving the energy efficiency of our customers' facilities, including insulation paint, various energy-saving devices, and LED lights for factory equipment. *For more details, please contact us.*

• others

The car stopper is a shock-absorbing material that solves the problem of contact damage between buildings and vehicles or ships. We propose the optimal shape and construction method for your equipment from a wide range of options and special products, contributing to the reduction of maintenance costs. ◆New Product◆ "D-Type Rubber Car Stopper (D-Type Bumper with Fabric Reinforcement)" This is our original product developed in collaboration with Sanwa Rubber Industry Co., Ltd. It features a reinforced contact surface with special fabric and an improved structure of the hollow part, significantly enhancing durability. For more details about the product and experimental data, please feel free to contact us. *For more information, please contact us or download the catalog.*

• Rubber
• Other safety and hygiene products
• others

Kobe Equipment offers a service that caters to various custom products, from sheet metal and press-processed items to machine tool parts, telescopic covers, and bellows, with the motto of "from prototypes to mass production," delivering with prompt and reliable lead times. 【Products Offered】 ◆ Telescopic Covers These are retractable covers for the maintenance and safety of machine tools, serving as essential components. They protect sliding surfaces from chips and cutting fluids and are effective in coolant management. Since most products are custom-made, please feel free to consult us starting with prototypes. ◆ Bellows Used to cover the moving surfaces of machines that require high precision, bellows help maintain the inherent accuracy of the machinery. We manufacture bellows in various shapes and materials to suit specific applications. *For more details, please contact us or download the catalog.

• Other machine tools
• Other machine elements

Kobe Equipment handles a wide range of products, including general rubber products, ultra-high tear-resistant Heliur packing, duct shoots made with high tear-resistant silicone, and urethane molded products. In addition to standard sizes, we also offer custom-made production tailored to special processing and shapes (such as square, round, and flange types). 【Products We Handle】 ◆ High Tear-Resistant Silicone "High Tear-Resistant Silicone" is a product that maintains the excellent characteristics of conventional silicone while improving the tear strength, which was its weak point. ◆ US Heliur Packing This is a Heliur packing that has significantly improved tear strength based on ultra-high tear-resistant silicone (US silicone). *For more details, please contact us or download the catalog.

• Rubber