高浜工業 List of Products and Services

The "LE70-AE type" is a small-sized, disassemblable vacuum extruder developed in response to strong requests from teachers at testing facilities for small-lot extrusion products. The three main functional parts of the vacuum kneader, from the feeding section to the kneading section, vacuum section, and extrusion section, can be opened and closed in a series. Additionally, the screw inside can be easily removed using a shaft-integrated separation method, making cleaning easy during material changes. 【Features】 ■ One-touch bolt tightening and removal ■ Three main functional parts of the kneader that open and close in a series ■ Easy-to-remove separation method for the screw and casing ■ No oil seals or bearings used in the Sana section ■ Stainless steel specifications for parts in contact with materials *For more details, please refer to the PDF materials or feel free to contact us.

• Extrusion Machine
• Vacuum forming machine

The "MPM120N model" is a vacuum-type clay mixer that can be opened on one side simply by loosening the nuts, making it easy to disassemble. The blades and shaft can be removed from the main body, facilitating easy cleaning of the remaining parts. Additionally, it employs an inverter for the blade rotation adjustment function, allowing for easy adjustments. 【Features】 ■ Easy to disassemble ■ Easy to clean ■ Easy to adjust ■ Can be opened on one side ■ Inverter used for blade rotation adjustment function *For more details, please refer to the PDF document or feel free to contact us.

• Extrusion Machine
• Other processing machines
• Vacuum forming machine

The "MMR-1AB model" is a measuring device that can measure moisture content in just 3 minutes. After adding the raw material, clay, the measurement starts automatically. The weight of the hot plate with the clay is measured, and then it is pressed between the upper hot plate and the lower one. After measuring the weight of the hot plate with the evaporated and dehydrated clay, the moisture content is calculated. The lower hot plate is tilted to remove the clay after measurement. 【Features】 ■ Measurement time: 3 minutes ■ Easy operation ■ Fully automatic ■ Patent No. 3921585 *For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Hot Air Dryer" is a device that can dry various ceramic products such as insulators and ceramic filters while managing humidity with high precision. [Features] ■ High-precision humidity management ■ Compatible with various ceramic products *For more details, please refer to the catalog or feel free to contact us.

• Drying Equipment

The "BF Series" is a mixing and feeding machine suitable for the production of ceramic products such as tiles and pottery. By appropriately mixing and stirring several types of raw materials, it can smoothly supply the specified amount to the next process, thereby producing high-quality raw materials. To withstand long-term and harsh use, structural steel materials are used in various parts such as the frame, box, hopper, and conveyor. Additionally, the design incorporates special materials in appropriate locations. Adjusting the mixing ratios of the raw materials and the supply amounts can be done with simple operations, allowing for the precise acquisition of the desired mixed raw materials. 【Features】 ■ Produces high-quality raw materials ■ Uses structural steel materials that can withstand long-term harsh use ■ Design incorporates special materials in appropriate locations ■ Easy to change and adjust mixing ratios *For more details, please refer to the catalog or feel free to contact us.

• Other processing machines

The "UR50 model" is a roller machine developed to match the trend of small-batch production of various ceramic products such as tableware and flower pots. It allows for combined production of both inner and outer molds with a single machine, and incorporates a highly precise arc slide molding method. It can perform trimming and fitting molding at the same position as general outer mold forming, significantly reducing the load on the lathe axis and bearings. Additionally, it can mold products without causing separation phenomena from the mold during the forming process, resulting in distortion-free products. The adjustment of the mold and fitting can be done easily, making it a molding machine that meets the industry's needs for producing high-quality products with high yield. 【Features】 - Mold adjustment is handled with one bolt for each operation. - Adaptable to a wide range of clay conditions with moisture content from 19% to 22%. - Individual speed adjustments are possible for the lathe axis, head axis, and cam axis, each with its own transmission. - Safety is ensured even when using only one side. *For more details, please refer to the catalog or feel free to contact us.

• Other processing machines

"Hot forged products" are the optimal method for processing important safety components and large parts that require these characteristics, as hot forging has low material deformation resistance and excellent strength and impact resistance. In recent years, they have been used in power generation components of hybrid vehicles and important drive system components around the axles, supporting the backbone of the automotive industry. *For more details, please refer to the catalog or feel free to contact us.

• Processing Contract
• Processing Contract
• Other Auto Parts

The "Door Trim Assembly Line" performs ultrasonic welding, screw fastening, retainer insertion, and W/S clip bending using robots, allowing for fully automated assembly of door trims for various vehicle models. *For more details, please refer to the catalog or feel free to contact us.*

• Assembly robot

The "SH Series" is a roller mill that excels in crushing power and processing capacity compared to conventional roll crushers. In the ultra-large model "SH1018," the roll pressure exceeds 200 tons. The "SH0709F" model is compact yet high-performance and high-crushing power, with basic operations similar to medium and large models. By using an automatic control roll cutting device, the rolls can be automatically shaved while being fed, allowing operators to not constantly monitor the process and enabling operation outside of regular hours. The "SH1018" features an automatic chip suction device, while the "SH0812" includes a chip collection tray to prevent contamination of the raw material. 【Features】 ■ Gap adjustment between rolls is displayed digitally with one touch. ■ Anyone can set it automatically just by matching the numbers. ■ A quantitative feeding device (optional) is available. - Uniformly conveys and supplies raw material across the full width of the rolls. - Simultaneously prevents uneven wear on the rolls. *For more details, please refer to the catalog or feel free to contact us.

• Mixer/agitator
• Other powder equipment
• Crusher

At Takahama Industries, we offer a variety of "industrial mixers" that accommodate various raw materials. *For more details, please refer to our catalog or feel free to contact us.*

• Mixer/agitator
• Other powder equipment
• Extrusion Machine

The "High-Pressure Extrusion Molding Machine" has realized various requirements for fine ceramics. It completely kneads and degasses hard raw materials, including alumina, making it ideal for extrusion molding of rod-shaped, tube-shaped, and irregular cross-section products, as well as honeycomb products. We offer a wide variety of models, including those with special specifications and easy maintenance. 【Features】 ■ Extensive lineup ■ Compatible with hard raw materials *For more details, please refer to the catalog or feel free to contact us.

• Other powder equipment
• Extrusion Machine

The "Vacuum Extruder" is a product that enables stable high-pressure extrusion molding. It achieves high quality and high yield, resulting in reduced running costs. It can be easily disassembled for simple maintenance. The oil-free vacuum pump also takes environmental considerations into account. The design features a gradually shortened lead of the blades on the extrusion shaft, resulting in a longer distance from the tip of the blade to the entrance and exit. 【Features】 ■ Increased rigidity of the extrusion shaft ■ Extremely low shaft distortion ■ Easy maintenance ■ Environmentally friendly with an oil-free vacuum pump *For more details, please refer to the catalog or feel free to contact us.

• Other powder equipment
• Extrusion Machine

The "Vacuum Clay Kneading Machine" is an industrial clay kneader developed by Kajiseki based on long experience and unique ideas, designed for various ceramic materials such as clay, raw soil, and porcelain. With the built-in complete kneading and complete de-aeration system and a rational design, it enables the production of high-quality raw materials. 【Features】 ■ Built-in complete kneading and complete de-aeration system ■ Rational design ■ Produces high-quality raw materials *For more details, please refer to the catalog or feel free to contact us.

• Mixer/agitator
• Other powder equipment
• Extrusion Machine

The "Non-fired Brick Manufacturing System" is a system that combines "newly developed machinery based on the kiln machinery technology cultivated by Takahama Industrial Co., Ltd. over many years" and "the know-how of (Kamei-style) non-fired brick manufacturing technology," along with patented technology. It has been realized through the integration of soft and hard technologies to meet social needs such as carbon dioxide reduction, global warming prevention, and the reuse of inorganic waste. We offer proposals on a global scale that respond to a circular society. 【Types of Non-fired Bricks】 ○ Scratch Cobble ○ Scratch ○ Scratch Walling For more details, please contact us or download the catalog.

• Mixer/agitator
• Other powder equipment

The "PEM255-DLH" is a multi-material extrusion molding machine that goes beyond traditional ceramic technology and accommodates various raw materials. It is used for pharmaceuticals, educational clay, resin clay, chalk, pencil leads, putty, and more. 【Features】 ○ Easily disassembled ○ Made maintenance easier For more details, please contact us or download the catalog.

• Mixer/agitator
• Other powder equipment

The "Lab Vacuum Extruder LE70 and Lab Crushing and Mixing Machine LM50" are specialized machines developed for laboratory use. The LE70 is an ultra-high-pressure extruder perfect for extrusion tests with various raw materials. The LM50 is a crushing and mixing machine that can both crush and mix in one unit. 【Features】 [Lab Vacuum Extruder LE70] - Condenses ultra-high pressure, reduced material usage, and smart technology into one machine - High-spec and stylish, capable of extruding any raw material [Lab Crushing and Mixing Machine LM50] - Simple and compact yet high-powered For more details, please contact us or download the catalog.

• Crusher
• Mixer/agitator
• Other powder equipment

Takahama Industrial Co., Ltd. has been continuously striving since its establishment in 1959 to develop products that meet the needs of the times and provide customer-oriented services. As a comprehensive manufacturer of leading ceramics machinery and equipment both domestically and internationally, as well as a specialized manufacturer of hot and cold forged products, we have continued to progress. In the Industrial Machinery Division, we leverage our unique ceramic technology to expand our business into areas such as general industrial machinery and environmentally friendly machinery equipment focused on energy conservation and recycling. In the Forging Division, we utilize traditional forging techniques and automated machinery to produce various highly precise forged products, receiving high praise from automobile manufacturers and related industries. Moving forward, we will prioritize the protection of limited global resources and the environment of local communities, and we will strive to contribute to society through "product development," "corporate development," and "human development." For more details, please contact us or download our catalog.

• Crusher
• Drying Equipment
• Powder Conveyor Device