タツタ List of Products and Services

The "HTS Ceptor-X" is a high-load, high-torque synchronous belt that has been introduced as a new addition to the toothed belt Ceptor series. 【Features】 ■ High transmission efficiency and compact design ■ Extended lifespan It has approximately twice the durability compared to the HP-HTS (conventional model). ■ Low noise Achieves about a 20% reduction in noise compared to conventional models. ■ Compatible with two types of pulley tooth profiles (HTS pulley, HTD pulley) *For more details, please refer to the catalog or feel free to contact us.

• Belts and pulleys

Ceptor X is a high-load toothed belt that achieves space-saving, lightweight, and low noise. Due to the improvement in transmission capacity, it is now possible to narrow the belt width, and the use of high-elasticity materials also enhances positioning accuracy! 【Features】 ■ High torque transmission ■ Compact and low noise ■ High responsiveness and positioning accuracy ■ Excellent tooth wear durability ■ Usable with standard pulleys 【Applications】 Industrial robots, medical and pharmaceutical equipment, semiconductor manufacturing equipment, injection molding machines, etc. *For more details, please refer to the catalog or feel free to contact us.

• Belts and pulleys

*What is Bandō Chemical's "Mr. Silky Coat"? It is a conveyor belt that offers unprecedented non-adhesiveness and can standardly perform joint processing. By impregnating the belt surface with silicone-modified polyurethane, it achieves high release and slip properties. It also allows for the transportation of adhesive materials while leaving hand powder intact. ＼Recommended for these situations!／ - When the adhesive properties of the transported items are high and cannot be resolved with conventional belts - When it is necessary to sprinkle hand powder in subsequent processes 【Features】 ■ Surface: High release and slip properties ■ Back: Usable with table support ■ Finger joint processing and V-guide processing available ■ Also available in anti-fraying type! ■ Usable with small pulleys ■ Complies with European PIM standards 【Applications】 Bread and pastry dough *For more details, please refer to the catalog or feel free to contact us.

• Belts and pulleys

*What is Bandō Chemical's "Mr. Pro Zipper"?* Achieving both workability and strength! This is a conveyor belt processing method that is gentle on transported items, using resin-based racing materials. The belt joints can be easily made endless by simply inserting a pin, allowing for efficient installation in sites with many constraints. **Features** ■ Easy jointing by just inserting a pin ■ Belt replacement possible even in high places and narrow spaces ■ Does not damage or dirty transported items! (Rust-free) ■ Can be replaced in a short time **Main Applications** ■ Transporting fabrics such as linens and cleaning items ■ Transporting packing cases *For more details, please refer to the catalog or feel free to contact us.*

• Belts and pulleys

*What is Bandō Chemical's "Mr. Banshīru"? By beautifully covering the sides of the Sunline belt with a special material, it prevents fraying and achieves excellent durability! In addition to durability and abrasion resistance, it also effectively prevents foreign matter from entering from the edges. 【Usage Examples】 Confectionery, baking, rice, meat processing, etc. 【Features】 ■ Prevents fraying ■ Effective against water and oil penetration! ■ Environmentally friendly design (no adhesives used, heat fusion processing) ■ Improved visibility with a contrasting color Banshīru processing! ■ Ideal mainly for food factories Conveyor belt / Conveyer belt / Transport belt *For more details, please refer to the catalog or feel free to contact us.

• Belts and pulleys

*What is Bandoh Chemical's "Mr. Climber"?* It is a resin conveyor belt that demonstrates excellent grip and durability, making it very resistant to load slipping. Additionally, even when the belt gets dirty or damaged, the decrease in grip can be minimized. ▼ Added <SL-MC430> to the lineup 　⇒ Coated with a cover material on the back to eliminate belt slip. ▼ Option "Joint with Sign Line Cover" 　⇒ Easy belt replacement! Also minimizes damage to transported items caused by the fittings! 【Examples of Use】 ■ For inclined transport 【Features】 ■ Prevents decrease in grip due to dirt and friction! ■ Dirt-resistant, low-noise specifications ■ A rich lineup of six types with various cover colors and ply counts *For more details, please refer to the catalog or feel free to contact us.*

• Belts and pulleys

*Bandoh Chemical's "Mr. Silky Touch" is a conveyor belt coated with a uniquely developed silicone-polyurethane hybrid. The surface cover provides excellent release properties and slip resistance. [Examples of Use] Confectionery, baking, rice, meat products, and more [Features] ■ Excellent release properties and slip resistance ■ Available in two colors: white and blue ■ Complies with European PIM standards ■ Uses impregnated canvas on the back ⇒ Allows selection from many V-guides *For more details, please refer to the catalog or feel free to contact us.

• Belts and pulleys

*Bandoh Chemical's "Mr. N Stick" is a conveyor belt specifically designed for transporting high-viscosity materials such as rice and glutinous rice by creating a surface with a convex shape similar to a rice paddle. We offer two types: one specialized in non-adhesiveness and another with excellent moisture and heat resistance and chemical resistance! [Examples of Use] ■ Transporting high-viscosity items such as rice and glutinous rice, etc. [Features] ■ Surface: Improved release properties due to the rice paddle shape! ■ Back: Impregnated canvas surface ⇒ Usable with table support ⇒ V-guide processing is possible ■ Maintenance is enhanced with a surface convex shape that has cleaning properties! ■ Surface colors are available in two options: white and blue ■ Seven varieties to choose from based on usage conditions *For more details, please refer to the catalog or feel free to contact us.

• Belts and pulleys

*What is Bandō Chemical's "Mr. Spike"?* It is a conveyor belt specialized for transporting meat and similar products, achieving excellent grip and cleanability with a unique surface shape. By integrally molding a convex spike shape on the belt surface, it enables precise transportation of items. 【Examples of Use】 ■ Holding and transporting during meat slicer loading, etc. 【Features】 ■ The surface has a spike shape (convex shape), providing: - "High grip" that reduces food variability and improves positioning accuracy! - "High cleanability" with good drainage. ■ Uses a hard polyurethane cover ⇒ Enhances the durability of the surface shape! ■ Prevents shrinkage caused by oil and powder infiltration. ■ Complies with European and American standards. *For more details, please refer to the catalog or feel free to contact us.*

• Belts and pulleys

*What is Bandō Chemical's "Mr. Ultra Mirror"? It is a high-performance conveyor belt that can be applied to small-diameter pulleys. By using fluororesin film, it exhibits high non-adhesiveness to transported items! It also has the characteristic of preventing liquids such as ink from soaking into the belt. Compared to conventional belts of the same material, it has better flexibility and is designed to make film peeling difficult. 【Features】 ■ Excellent release properties... No sticky transported items left behind! ■ Excellent wipe-off properties... Liquids like ink do not soak into the belt and can be wiped off! ■ Usable with a minimum pulley diameter of Φ27! ■ Suitable for high-temperature and high-humidity transport up to 100°C ■ Reduces film peeling and allows for finger joints ■ Prevents shrinkage due to creeping *For more details, please refer to the catalog or feel free to contact us.

• Belts and pulleys

EOAT (End Of Arm Tool) / VMECA EOAT is a flange-shaped plate specifically designed for collaborative robots, used to assemble vacuum systems and collaborative robots. 【Product Lineup】 ■ REM-MC ... For Magic Gripper MC20 ■ REM-TS08 ... For Aluminum Frame TS08 ■ REM-VG ... For V Grip G30, 40, 50 *For more details, please refer to the PDF document or feel free to contact us.

• Vacuum Equipment
• Vacuum pump

The VMECA "Magic Gripper MV Series" is a system that can be attached to the end of a robotic hand, integrating a vacuum generator and vacuum pad. With a slim vertical design, it can accommodate up to four unique vacuum cartridges. It has a maximum suction flow rate of 165.2 NL/min and a maximum vacuum level of -90 kPa. By changing the vacuum pads, it is capable of handling various workpieces such as bags, cardboard, cans, and metal plates. 【Features】 - Suitable for attachment to the end of collaborative robots and industrial robots - Allows for the use of 14 different types of vacuum pads depending on the workpiece - Offers a wide variety of stopper and sealing material types - Can accommodate up to four vacuum cartridges - Can be equipped with a check valve for vacuum retention *For more details about the "MV Series," please refer to the documentation.

• Vacuum Equipment

■ What is VMECA's "Smart Vacuum Pad"? It is a vacuum pad that combines a vacuum pad ideal for transporting workpieces with oil on them and a "smart cup" that allows for tilting. This product is perfect for transporting workpieces with varying heights, such as automotive panels. We also offer options with ball joints that absorb height differences and level springs for height adjustment! ■ Features - Automatic return to the origin (maximum tilt angle of ±21°!) - Pads can be replaced individually - Long stroke capability (available only with level spring) 【Applicable Pads】 FCF series, VBF series, VDF series 【Applicable Workpieces】 Metal sheets, automotive panels, pressed steel sheets, panels, electrical products, curved glass, cardboard boxes, *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

VMECA's "Needle Gripper" is a product capable of transporting flexible non-solid materials and materials that are difficult to hold with vacuum. It can securely grasp workpieces using needles and transport them safely. ■ Features - Built-in double-acting pneumatic cylinder - Adjustable needle length - Easy maintenance and needle replacement - Simple operation - Safe transport of workpieces 【Applications】 - Flexible non-solid materials - Materials that are difficult to hold with vacuum (e.g.) fibers, fleece, felt, carpets, expanded polystyrene, insulation mats, foam materials *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

VMECA's "Solar Master" is a vacuum device for suction and transport of solar cells. It can safely transport workpieces with stable suction power and fast response speed. ■ Features - VMECA's unique "high-performance" vacuum cartridge with integrated structure - Stable suction power and fast response speed - Perfect suction with low vacuum levels and large suction area - The contact suction surface is made of PEEK material, providing excellent anti-static effects - Standard cell sizes are 5" (125mm) and 6" (150mm), compatible with wafer sizes as well *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "NF Series Flow Control Type" is a non-contact flat-shaped suction and vacuum pad. *This is a type of the NF series that allows for flow adjustment. ■ Features of the NF Series Flow Control Type - Prevents scratches and suction marks on the workpiece due to the non-contact method - Prevents dust intake from the suction surface as the intake port is located on the side - Ideal for transporting thin and sensitive workpieces due to flow adjustment 【Applications】 Circuit boards, PCB boards, solar cells, food, paper, film, CDs & DVDs, and more *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "NF Series" is a non-contact flat-type suction and vacuum pad. ■ Features of the NF Series - Prevents scratches and marks on the workpiece due to non-contact method - Application of multi-stage nozzle principle - Achieves high suction flow and adhesion force with low air consumption - Semi-permanent lifespan with no moving parts - Separation and transport of breathable workpieces 【Applications】 Circuit boards, solar cells, CDs & DVDs, thin paper, mirrors, wood, paper boxes, plastics, films, and more *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "KPS series" is an adsorption and vacuum pad that can be used for tasks such as opening plastic bags. ■ Features of the KPS series - Used for applications that require adhesion to plastic bags, pouch packs, etc. 【Applications】 Plastic bags, pouch packs, thin film materials *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VOBF Series" is an oval bellows and flat type suction vacuum pad. ■ Features of the VOBF Series - Suitable for transporting long or narrow workpieces with flat or curved surfaces - Provides stable holding power for vertical and horizontal transport - Prevents lateral slipping of workpieces 【Applications】 Automotive panels, doors, sheet metal, pressing processes, and more *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VOC Series" is an oval and curved suction vacuum pad. ■ Features of the VOC Series - Transporting long workpieces on flat or curved surfaces - Strong and stable suction without slipping - Transporting workpieces without shaking 【Applications】 Stone materials, steel plates, automotive bumpers, pressed products, and more *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VOU series" is an oval and universal type suction pad. ■ Features of the VOU series - Transporting long workpieces on flat or curved surfaces - High suction power for small workpieces - Conductive silicone is ideal for transporting PCB boards and electronic components 【Applications】 Semiconductor chips (PCB boards), electronic components, pipes, small glass containers (e.g., ampoules), and more. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VS Series" is a sponge-type suction pad. ■ Features of the VS Series - Transporting workpieces with a flat surface - Transporting elongated workpieces 【Applications】 - Bricks - Stone materials - Lumber, etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VD series" is a deep suction pad. ■ Features of the VFC series - Transfers workpieces with flat and curved surfaces both vertically and horizontally - Strongly adheres without slipping during transfer - Transfers workpieces without shaking 【Applications】 Steel plates (flat and cornered steel plates), cardboard, plywood, automobile doors, roofs, sheet metal, home appliances, electronic products, CRTs, and more. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

VMECA's vacuum pad "VFC Series" is a flat and curved type suction pad. ■ Features of the VFC Series - Transfers workpieces on flat and curved surfaces both vertically and horizontally - Strong and secure suction without slipping - Transfers workpieces without shaking 【Applications】 Automotive glass, doors, roofs, CRTs, sheet metal, home appliances, electronic components, and more *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VF Series" is a flat-type suction pad. ■ Features of the VF Series - Transfers flat workpieces vertically and horizontally - Strongly adheres without slipping - Transfers workpieces without shaking 【Applications】 Flat steel plates, plywood, glass, home appliances, electronic components, etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VU Series" is a universal type suction pad. ■ Features of the VU Series - Transporting flat or gently curved workpieces - Transporting slightly recessed workpieces - Transporting smooth or slightly curved workpieces 【Applications】 Small parts, semiconductor chips, packaging materials, cardboard, sheet metal, and more *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pads "VBL / VOBL Series" are bellows and long-type suction pads. ■ Features of the VBL / VOBL Series - Transporting workpieces with steps - Transporting fragile items - Not suitable for applications requiring high vacuum ✕ 【Applications】 Eggs, bread, glass cups, vacuum-packaged food, and more *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VBX series" is a bellows and cross-groove type suction pad. ■ Features of the VBX series - Transporting workpieces with curved surfaces, irregularities, and steps - Separating stacked sheets 【Applications】 Plywood, sheet metal, laminated wood, cardboard boxes, glass, and more *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VBU series" is a bellows and universal type suction pad. ■ Features of the VBU series - Transporting workpieces with curved surfaces, irregularities, and steps - Separating stacked sheets 【Applications】 Plastic packs, sheet metal, plywood, cardboard boxes, etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

VMECA's vacuum pad "FCF Series" is a flat and curved type of suction pad for transportation. ■ Features of the FCF Series - Prevents slipping during the transport of oil-coated steel plates! - Made of polyurethane with excellent wear resistance - Capable of high-speed work transport with strong suction power - Can transport thin steel plates without deformation during suction 【Applications】 Sheet metal, boxes, automotive panels, steel plate supply for press machines, convex surfaces, etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VBF Series" is a bellows and flat type suction pad for transportation. ■ Features of the VBF Series - Vertical and horizontal transport - High suction power and excellent wear resistance - Prevents deformation when adhering to thin metal sheets 【Applications】 Sheet metal, automotive panels and doors, steel plate supply for press machines, glass, plywood, etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VB-M series" is a directly mountable, bellows-type suction pad. ■ Features of the VB-M series - Pads can be directly attached to pipes for use - Ideal for transporting flat, curved, and uneven workpieces - Capable of separating stacked thin plates 【Applications】 Pouch packs, packaging materials, plastic sheets, plywood, thin films, etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "VB Series" is a bellows-type suction pad. ■ Features of the VB Series - Ideal for transporting flat, curved, and uneven products - Capable of separating stacked thin plates 【Applications】 Plywood, plastic sheets, cardboard, electronic components, thin films, etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "LF Series" is a flat-type suction pad for transportation with a double lip structure. ■ Features of the LF Series - Ideal for vertical, horizontal, and bi-directional transport - Strong double lip structure resistant to fatigue and tearing → Improved safety - Exhibits stable holding power without slipping! 【Applications】 Flat steel plates, glass, plywood, electronic components, marble, etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "FFU Series" is a flat-type suction pad designed for transport, preventing suction marks. ■ Features of the FFU Series - Ideal for transporting thin films and easily scratched sheets - Perfect for transporting workpieces that should not receive suction marks or damage 【Applications】 Thin films, displays, semiconductors, thin metal sheets (foil sheets), etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "FF Series" is a flat-type suction pad for transport that prevents suction marks. ■ Features of the FF Series - Extremely thin and lightweight for work applications - Prevents suction marks and damage 【Applications】 Semiconductors, displays, thin films, etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "UF Series" is a flat-type suction pad designed to prevent marks during transportation. ■ Features of the UF Series - Ideal for semiconductor transport - The grooves on the suction surface and the thin lip make it perfect for transporting thin and easily scratched workpieces! 【Applications】 - Thin films - Displays - Semiconductors - Thin metal sheets (foil sheets), etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

The VMECA vacuum pad "BL Series" is a bellows and universal type suction pad for transporting items. ■ Features of the BL Series - Capable of transporting irregular curved surfaces, flat surfaces, and workpieces with steps - Double lip structure designed to handle overload and damage 【Applications】 Food (fruits), eggs, plastic bags, packaged products, pouch packs, etc. *For more details, please refer to the catalog or feel free to contact us.

• Vacuum Equipment

Asahi Precision Engineering "Caliper Brake BMKE Type (ASAHI Caliper)" * The "BMKE Type" is a spring-actuated caliper brake from the ASAHI caliper series, featuring a normally closed type that releases with compressed air. Holding force: 500–1200 N ■ Features ◎ Selectable release pressure (0.4 MPa, 0.6 MPa) ◎ 100% utilization of the braking spring force ◎ Compact design ◎ Heat-resistant friction plates ◎ Torque adjustment possible by changing the disc diameter ◎ Usable without lubrication ◎ Easy replacement of friction plates! * For more details, please refer to the catalog or feel free to contact us.

• brake

Bearing Unit Pillow Block "Steel Plate Series" / Asahi Seiko The bearing unit "Steel Plate Series" is a type that combines rubber-sealed insert bearings with two steel plate bearing housings. It has a simple structure and is suitable for relatively light loads and medium to low-speed drive shafts. ■ Specifications Bearing Type: Cylindrical Hole Type Set Screw Type / Eccentric Ring Type Shaft Diameter: 12–35mm *For more details, please refer to the catalog or feel free to contact us.

• Metal bearings

Sliding Bearing Unit Pillow Block "High-Temperature, Underwater Bearing" by Asahi Seiko The "High-Temperature, Underwater Bearing" by Asahi Seiko is a sliding bearing unit that can be used in special environments such as high temperatures and underwater. It uses special materials for the bearing and bearing housing, allowing for mutual alignment and correction of shaft misalignment. It has excellent corrosion resistance, making it safe for use in applications such as food machinery. ■ Features ◎ Excellent corrosion resistance - Resistant to most chemicals ◎ No lubrication required - Hygienic as no lubricant is needed on the sliding surfaces ◎ Lightweight (Models: EX200, EX000, EXB00, US100) ◎ Mounting dimensions are compatible with JIS shapes (Models: EXP200H, EXFL200H, EXMP200P, EXMFL200P) ◎ Low absorption, allowing for use underwater (Except for models: EXP000, USP100, EXFL000, USFL100) *For more details, please refer to the catalog or feel free to contact us.

• Metal bearings

Bearing Unit "Eco Series" by Asahi Seiko The "Eco Series" bearing unit is a unit that uses stainless steel for the bearing, eccentric fixing ring, and bearing box. It has excellent corrosion resistance, making it suitable for machines that are sensitive to rust. Additionally, it is filled with food-grade grease (compliant with H1 standards), allowing for safe use in food machinery. *Both pillow type and hex flange type are available with stainless steel covers. ■Features ◎ Excellent corrosion resistance and strength with stainless steel ◎ Attractive appearance ◎ Energy-saving and resource-efficient, environmentally friendly ◎ Compact design allows for smaller equipment design ◎ Easy fixation to the shaft with the eccentric ring method 　→ Reduces stress corrosion cracking of the inner ring due to set screw fixation ■Applications Food, pharmaceuticals, chemicals, packaging machinery *For more details, please refer to the catalog or feel free to contact us.

• Metal bearings

Bearing Unit "Silver Series" Asahi Seiko The "Silver Series" is a bearing unit that is smaller and lighter compared to conventional bearing units, allowing for the compactification of machinery and equipment. Additionally, the bearing box features a center mark for easy positioning. All shapes come with a stainless steel cover that provides dust and moisture protection, and the cover is secured with clips, making it easy to attach and detach! ■ Features ◎ Compact and lightweight ◎ Easy positioning with center mark ◎ Superior dust resistance (with stainless steel cover) ◎ Reliable and easy fixation to the shaft using eccentric ring or set screw method ◎ Capable of high-speed operation despite its small size ◎ Dust and moisture protection (cover seal has a double lip structure) *For more details, please refer to the catalog or feel free to contact us.

• Metal bearings

Asahi Seiko Bearing Unit Pillow Block ■ Cast Iron Series Pillow Type Unit 'UCC Type' The UCC type is a design that combines an insert bearing with a cylindrical bearing box made of cast iron, which has been finished by grinding on the outer diameter surface. The entire unit can be handled in the same way as general bearings and is suitable for drive shafts that undergo expansion and contraction. ■ Specifications 〇 Bearing Box: Cylindrical 〇 Bearing: Set screw type, cylindrical hole shape 〇 Shaft Diameter: 12–140mm *For more details, please refer to the catalog or feel free to contact us.

• Metal bearings

Asahi Seiko Bearing Unit Pillow Block ■ Cast Iron Series Frame Type Take-Up Unit 'UCTL+WL Type' 'UCTU+WU Type' This is a bearing unit that combines a take-up unit with a steel plate frame. The shaft center can be freely moved using the adjustment bolts on the frame. ■ Specifications 〇 With steel plate frame 〇 Bearing box: Take-up type 〇 Bearing: Set screw type, cylindrical hole type 〇 Shaft diameter: 　UCTL200+WL Type: 20–45mm 　UCTU200+WU Type: 40–60mm 　UCTU300+WU Type: 65–90mm *For more details, please refer to the catalog or feel free to contact us.

• Metal bearings