AAポータブルパワー株式会社 List of Products and Services

- Can coat the substrate while discharging slurry from a 100mm wide die head. - Can be installed inside a glove box.

• Secondary Cells/Batteries
• Coater

Compatible cells: Nickel-Cadmium / Nickel-Metal Hydride / Lithium-Ion / Lithium Polymer / Lithium Iron Phosphate - We have expertise due to many years in the battery industry. - We have joint ventures with multiple manufacturers, enabling fast and stable supply of batteries and related products. - We also provide support for compliance testing with domestic and international safety standards and UN transport regulations. - We have in-house testing facilities for UN/IEC standards and offer testing services. - We have battery pack assembly lines both domestically and internationally, allowing us to accommodate expedited delivery. - We also design protection circuits and Battery Management Systems (BMS).

• Secondary Cells/Batteries
• Coater

- Charge and discharge equipment for small-sized batteries such as coin cells and cylindrical cells - Independent 8 channels allow for control under different test conditions and timings - Three types of current values: 5V at 0.002mA to 1mA, 0.1mA to 10mA, and 6.0mA to 3000mA

• Secondary Cells/Batteries
• Coater

- Easy assembly. Just thread the bottom plate and top plunger into the nylon body. - Stainless steel contact plate and plunger. - PTFE gasket and nylon body resistant to corrosion from electrolytic solution. - Airtight design prevents leakage of electrolytic solution. - Easy disassembly and cleaning after use, reducing the burden of experiments. - Same functionality as Swagelok cells with a wider range of size options. - Can be securely attached to MTI analyzers without wire connections.

• Secondary Cells/Batteries
• Coater

- Individual assembly of 8 cells and simultaneous testing is possible. - High-throughput testing and screening of R&D materials is possible. - Stainless steel contact plate and plunger. - PTFE gasket and nylon body resistant to corrosion from electrolyte. - Airtight design to prevent electrolyte leakage. - Easy disassembly and cleaning after use, reducing the burden of experiments. - Easy connection to MTI Corporation analyzers.

• Secondary Cells/Batteries
• Coater

It is a small-sized coating machine. Due to the built-in flat vacuum chuck, it securely holds the sheet and is very convenient for coating thin films, applying a consistent film thickness. It comes with a film applicator with a 100 mm wide micrometer.

• Secondary Cells/Batteries
• Coater

The MSK-AFA-III is a coating machine with a heat cover that can dry thin films at temperatures up to 100°C after coating. It features a built-in flat vacuum chuck, which securely holds the sheet and is very convenient during the application of thin films, ensuring a consistent film thickness. It comes with a film applicator with a micrometer for a width of 100 mm.

• Secondary Cells/Batteries
• Coater

It is a large-sized coating machine. It comes with a film applicator with a micrometer that has a width of 250 mm.

• Secondary Cells/Batteries
• Coater

It is a film applicator equipped with a micrometer head. It can be used for various applications such as ceramic tape casting and research on battery electrodes.

• Secondary Cells/Batteries

This is a manual crimping machine for coin cells (coin batteries) used in secondary battery research. It can crimp CR2032, 2016, and 2025 with a single mold.

• Secondary Cells/Batteries

This is a manual disassembly machine for coin cells (coin batteries) used in secondary battery research. It can disassemble CR2032, 2016, and 2025 with a single mold.

• Secondary Cells/Batteries

This is a set of 100 caps, cases, and sealing O-ring gaskets for CR2032 coin cells (coin batteries). Please use it for research purposes.

• Secondary Cells/Batteries

Set of wave springs and spacers for CR2032 coin cells (coin batteries). Contains 100 pieces.

• Secondary Cells/Batteries

This is a set of 100 caps, cases, and sealing O-ring gaskets for CR1220 coin cells (coin batteries). Please use it for research purposes.

• Secondary Cells/Batteries

This is a set of 100 caps, cases, and sealing O-ring gaskets for CR2016 coin cells (coin batteries). Please use it for research purposes.

• Secondary Cells/Batteries

This is a set of 100 caps, cases, and sealing O-ring gaskets for CR2450 coin cells (coin batteries). Please use it for research purposes.

• Secondary Cells/Batteries

Mesh CR2032 (φ20x3.2mm) coin cell (coin battery) cap + case, 10 pieces included.

• Secondary Cells/Batteries

This is a manual crimping machine for cylindrical cells used in secondary battery research. The molds can be selected from six types for CR123, 18650, 26650, 32650, AA, and AAA.

• Secondary Cells/Batteries

This is a set of 100 cylindrical 18650 battery can cases for lithium-ion (Li-ion) batteries, including PTC built-in caps and insulating O-rings.

• Secondary Cells/Batteries

This is a set of 250 cylindrical 21700 battery can cases + caps + insulating O-rings for lithium-ion (Li-ion) batteries.

• Secondary Cells/Batteries

We will perform a grooving (necking) process on the top of the cylindrical cell used for secondary battery research to place a cap.

• Secondary Cells/Batteries

We offer high-quality and affordable crystals and materials from MTI Corporation, a top-class supplier in the industry. You can purchase as little as one item. MTI's stock items can be delivered in as little as 1 to 2 weeks. For more details, please visit our website.

• Secondary Cells/Batteries
• Other metal materials

We offer high-quality and affordable crystals and materials from MTI Corporation, a top-class company in the industry. You can purchase from as little as one piece. MTI's stock items can be delivered in as little as 1 to 2 weeks. For more details, please visit our website.

• Secondary Cells/Batteries
• Other metal materials

We offer high-quality and affordable crystals and materials from MTI Corporation, a top-class company in the industry. You can purchase as little as one item. MTI's stock items can be delivered in as little as 1 to 2 weeks. For more details, please visit our website.

• Secondary Cells/Batteries
• Other metal materials

We deliver high-quality and affordable crystals and materials from MTI Corporation, a top-class company in the industry. You can purchase from as little as one item. MTI's stock items can be delivered in as little as 1 to 2 weeks. For more details, please visit our website.

• Secondary Cells/Batteries
• Other metal materials

We offer high-quality and affordable crystals and materials from MTI Corporation, a top-class company in the industry. You can purchase from as little as one piece. MTI's stock items can be delivered in as little as 1 to 2 weeks. For more details, please visit our website.

• Secondary Cells/Batteries
• Other metal materials