轟産業 List of Products and Services

COMPACT - A small body that can always be carried around - We have achieved a lightweight and compact body that can be carried at all times. Additionally, it is equipped with Bluetooth(R) for wireless connection to smartphones. You can check the identification results on the spot. *Bluetooth(R) is a trademark or registered trademark of Bluetooth SIG, INC. in the United States and other countries. EASY - Easy to operate even for first-time users - Once you turn on the power, simply place the sensor part on the resin you want to identify and press the button. To avoid confusion during operation, we have thoroughly reduced the number of buttons and switches. SPEEDY - A user-friendly interface for beginners to experts - A dedicated app that identifies resins and informs you of the results through display and sound. By keeping the screen layout as simple as possible, we have achieved excellent operability.

• Analytical Equipment and Devices

PEPO is a commercial cooling and heating device that uses water as a heat source, capable of dehumidifying without emitting waste heat. It effectively cools even in extremely hot indoor environments above 35°C and in high-temperature, high-humidity conditions. For example, supplying groundwater at 17°C at a rate of 30L/min allows for 25kW of cooling even at an indoor temperature of 35°C. At 25kW cooling, the COP is 30! The power consumption is less than one-tenth that of conventional air conditioners! The reduction in CO2 emissions is over 10 tons annually! This design is highly energy-efficient. *The data is based on calculations for 180 days of operation. ★ Many advantages ★ ■ No waste heat is produced ■ No refrigerants are used ■ Dehumidification is achieved using condensation (there is no splashing of condensed water) ■ Wind speed can be freely adjusted (maximum outlet wind speed of 10m/sec) ■ Power consumption is only 0.83kW Furthermore, if hot water is supplied, it can also be used for heating purposes. Heating using return hot water from cooling towers is particularly advantageous as it recovers waste heat!

• Dehumidifier

AirPEPO is a cooling device that operates solely on compressed air, uses water as a heat source, does not emit waste heat, and is capable of dehumidifying and cooling by utilizing temperature differences. It is ideal for preventing heat-related illnesses and managing heat in excessively hot indoor environments due to waste heat from machinery, radiant heat, and warm air from the ceiling. Additionally, when hot water is supplied, it can also be used for heating. 【Do you have any of these concerns?】 ■ In high-temperature and high-humidity factories with machines that generate heat in fire-restricted areas, there are hardly any options other than spot coolers... ■ While a spot cooler may keep one person directly in front of it cool, the exhaust heat actually raises the room temperature... It seems there are still options available even in fire-restricted manufacturing sites! * For more details, please feel free to [contact us]. * If you are concerned about air consumption, there is also a hybrid type that operates on both air and electricity. * The use in fire-restricted manufacturing areas may vary based on the opinions of the local fire department.

• Other air conditioning equipment

Achieves a detection sensitivity of ±1mm. With all-air control, no electrical work is required, allowing for safe and secure use even in explosive atmospheres. Additionally, it can be easily installed in narrow spaces thanks to the mounting clamp, so you won't have trouble finding a suitable installation location. 【Features】 ■ Simple connection by just inserting the tube ■ Achieves a detection sensitivity of ±1mm ■ Suitable for monitoring overflow and liquid depletion ■ The material of the detection part can be chosen according to customer preference (PFA/SUS, etc. can be used) ■ Compatible liquids: water, oil, chemical solutions, viscous liquids, solvents, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Safety Sensors

The "CS Series" is a device that detects weight using a load cell method, allowing for the rapid automatic weighing and mixing supply of various types of liquids according to set ratios. It widely accommodates the liquid blending required in production lines, contributing to improvements in quality and productivity. Additionally, the device can be manufactured in various specifications, and in addition to the standard functions of an automatic liquid mixing and stirring device, we can create blending equipment tailored to your specific applications. 【Features】 ■ Compatible with a wide variety of liquids (main agents, hardeners, additives, solvents, etc.) ■ Capable of manufacturing devices in various specifications ■ Achieves accurate blending with a unique weighing control method ■ Continuous automatic operation with settings for blending ratios and total weight *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine
• Other processing machines

The "Automatic Reaction Tester" is a multipurpose automatic reaction device that meets the high-precision temperature control and droplet control required for synthetic reaction experiments. It is a standard type that does not take up much space when installed on an experimental table or low-height draft. The low-height type is suitable for installation within a regular draft. We also have demo units available, so please feel free to contact us if you are interested. 【Features】 ■ Significantly reduces labor for reaction experiments ■ Accurately obtains fundamental data for reaction tests ■ Allows multi-channel control through PC connection ■ Switchable heating and cooling control methods *For more details, please refer to the PDF materials or feel free to contact us.

• Humidification device

PEPO is a cooling device that utilizes temperature difference heat, capable of dehumidifying and cooling without emitting waste heat. It is ideal for preventing heatstroke and managing high temperatures in excessively hot indoor environments caused by machine waste heat, radiant heat, and heat from the ceiling. It can also assist in pre-cooling for air conditioners. ~ The AirPEPO cooling device is perfect for manufacturing sites where open flames are strictly prohibited! ~ 【Do you have any of these problems?】 ■ The waste heat and radiant heat from machines make it too hot, and the air conditioner can't lower the temperature... ■ A spot cooler makes one person comfortable, but the exhaust heat actually raises the room temperature... ■ In environments where air conditioners are ineffective, using a high-capacity portable air conditioner only creates airflow without improving room temperature... ■ Evaporative coolers increase humidity, which is a major factor in heatstroke, raising the heat index... 【Isn't it possible to cool without relying solely on air conditioning?】 If it’s hot enough that the air conditioner is ineffective, shouldn’t we lower the room temperature to a level where the air conditioner works? With PEPO, there is no waste heat and it saves energy, making it ideal for pre-cooling. By pre-cooling, the air conditioner’s efficiency improves, and electricity costs can be reduced. *For more details, please feel free to [contact us].

• Dehumidifier

The "Online Melt Indexer" is an online resin viscometer that continuously measures the MI value (MFR value) of resin viscosity. It reduces the effort and time compared to measurements taken through offline sampling. This helps stabilize the product. We offer a standard model "AVS-10S," a return type "AVS-10R," and an explosion-proof type "AVS-10F." 【Features】 ■ Continuously measures the MI value (MFR value) of resin viscosity ■ Reduces management effort ■ High-precision MI value (MFR value) that faithfully adheres to JIS standards due to its low-pressure capillary design ■ Remote monitoring and safety devices included ■ Ventilated type with internal pressure purge, suitable for use in Class II hazardous locations (explosion-proof type only) *For more details, please refer to the PDF document or feel free to contact us.

• Viscometer
• Other measurement, recording and measuring instruments

The "CS Series" is a device that detects weight using a load cell method and quickly and automatically weighs and stirs a variety of liquids according to set ratios. It widely accommodates the liquid blending required in production lines, contributing to improvements in quality and productivity. Additionally, the device can be manufactured in various specifications, and in addition to the standard functions of an automatic liquid mixing and stirring device, we will create blending equipment tailored to your specific applications. 【Features】 ■ Compatible with a wide range of liquids (main agents, hardeners, additives, solvents, etc.) ■ Capable of manufacturing devices in various specifications ■ Achieves accurate blending with a unique weighing control method ■ Continuous automatic operation with settings for blending ratios and total weight *For more details, please refer to the PDF document or feel free to contact us.

• Painting Machine
• Other processing machines

The "Automatic Reaction Tester" is a multifunctional automatic reaction device that meets the requirements for high-precision temperature control and drop control in synthetic reaction experiments. It is a standard type that does not take up much space when installed on a laboratory bench or low-height draft. The low-height type is suitable for installation within a regular draft. We also have demo units available, so please feel free to contact us if you are interested. 【Features】 ■ Significantly reduces labor in reaction experiments ■ Accurately obtains fundamental data for reaction tests ■ Allows multi-channel control through PC connection ■ Switchable heating and cooling control methods *For more details, please refer to the PDF materials or feel free to contact us.

• Humidification device

Achieves a detection sensitivity of ±1mm. With all-air control, no electrical work is required, allowing for safe and secure use even in explosive atmospheres. Additionally, it can be easily installed in narrow spaces thanks to the mounting clamp, so you won't have trouble finding a suitable installation location. 【Features】 ■ Easy connection by simply inserting the tube ■ Achieves a detection sensitivity of ±1mm ■ Suitable for monitoring overflow and liquid depletion ■ The material of the detection part can be chosen according to customer preference (PFA/SUS, etc. can be used) ■ Compatible liquids: water, oil, chemical solutions, viscous liquids, solvents, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Safety Sensors

◆Visualization of IoT is standard, RPA and DX with feedback control◆ ◆Network devices robust against cyber attacks and malware◆ ◆Not building a huge system, but harmonizing data in an agile manner◆ | Platform 1 [Microsoft Azure + i-MENET ConverIoT-ASC] A system utilizing Microsoft's IoT solution Azure series. Using the smart conditioner i-MENET ConverIoT-ASC equipped with Microsoft's advanced security technology Azure Sphere, we achieve secure cloud management. | Platform 2 [Customization] Using the smart conditioner PRO equipped with our original edge computer compatible with all sensors and devices. We create platforms tailored to your needs, from on-premises to cloud. | Platform 3 [Fact Monitoring] A monitoring system for factory (production equipment) operational status. It is used in combination with the smart conditioner BASIC and two types of sensing units (factor unit, counting unit).

• Production Management System

【Multi Cyclone】 ◆ Zero Corrosion - Uses a transparent polycarbonate shell and glass-reinforced PP and PVC adapters. - Can handle seawater and hot spring wastewater (please use below 55℃). ◆ No Filter Replacement Required - Features a centrifugal cyclone structure without an internal filter, eliminating the need for replacement parts. - Simply open the drain valve during operation to discharge dirt. ◆ High Efficiency Separation Capability - By multi-structuring the cyclone section, centrifugal force is increased compared to conventional single structures, enhancing separation capability. - Capable of separating not only large sand particles (approximately 100 microns) but also fine dirt down to 20 microns, allowing for the collection of pollen and rust. ◆ Easy Installation - Lightweight, making it easy to install with plastic hoses or PVC piping. 【Usage Precautions】 ■ Separation Targets: Solid Objects (Size: 2mm to 2μm, Specific Gravity: 1.5kg/L or more) - Examples of separable items: [✓] Sand / Volcanic Ash / Blast Powder / Rust Powder / Calcium Scale - Examples of non-separable items: [×] Oil / Slime / Foam * High-viscosity substances can easily accumulate and cause malfunctions. ■ Usable Water Temperature Range: Water Temperature 0℃ to 45℃

• Other consumables

PEPO is a cooling device that utilizes temperature difference heat, capable of dehumidifying and cooling without emitting waste heat. It is suitable for preventing heat-related illnesses and managing high temperatures in excessively hot indoor environments due to waste heat from machinery, radiant heat, and hot air from ceilings. As a product that utilizes renewable energy, specifically "temperature difference heat," it is also effective for energy-saving and power-saving measures. When hot water is supplied, it can also be used for heating. ~ AirPEPO is ideal for manufacturing sites where open flames are strictly prohibited! ~ [Do you have any of these concerns?] ■ In factories where machines generate heat and temperatures exceed 35°C, air conditioning cannot lower the temperature... ■ With spot coolers, one person may feel cool, but the exhaust heat actually raises the room temperature... ■ In environments where air conditioning is ineffective, using a high-volume portable air conditioner only creates airflow without improving room temperature... ■ Evaporative coolers increase humidity, raising the "heat index," which is a cause of heat-related illnesses... Currently, based on examples that have resolved the above issues, we will explain the reasons why heat-related illness prevention often fails in environments where air conditioning is ineffective! * The materials can be viewed from [PDF Download]. For more details, please feel free to [Contact Us].

• Dehumidifier

PEPO is a cooling device that utilizes temperature difference heat, capable of dehumidifying and cooling without emitting waste heat. It is ideal for preventing heatstroke and managing heat in excessively hot indoor environments. Additionally, as a product that utilizes renewable energy, specifically "temperature difference heat," it is also effective for energy-saving and power-saving measures. 【Do you have any of these concerns?】 ■ In factories where machines generate heat and temperatures exceed 35°C, air conditioning cannot lower the temperature... ■ With spot coolers, one person may feel cool, but the exhaust heat actually raises the room temperature... ■ High-capacity portable air conditioners only blow air, failing to improve room temperature... ■ Evaporative coolers increase humidity, raising the "heat index," which is a cause of heatstroke... ~ Currently, we are showcasing examples that have solved the above issues ~ * Case study materials can be viewed from [PDF Download]. For more details, please feel free to [Contact Us].

• Dehumidifier

◆IoT visualization is standard, RPA and DX with feedback control◆ ◆Network devices robust against cyber attacks and malware◆ ◆Not building huge systems, but harmonizing data in an agile manner◆ | Platform 1 [Microsoft Azure + i-MENET ConverIoT-ASC] A system utilizing Microsoft's IoT solution Azure series. Using the smart conditioner i-MENET ConverIoT-ASC equipped with Microsoft's advanced security technology Azure Sphere, we achieve secure cloud management. | Platform 2 [Customization] Using the smart conditioner PRO equipped with our original edge computer compatible with all sensors and devices. We create platforms tailored to your needs, from on-premises to cloud. | Platform 3 [Fact Monitoring] A monitoring system for factory (production equipment) operational status. Used in combination with the smart conditioner BASIC and two types of sensing units (factor unit, counting unit).

• Production Management System

Even in high-temperature and high-humidity environments with room temperatures above 35°C where air conditioning is ineffective, you can stay cool with the combination of FCC15B and PEPO! *FCC15B is the recommended chiller for the water-source heating and cooling device PEPO, the air-driven heating and cooling device AirPEPO, and the hybrid heating and cooling device HybridAirPEPO. FCC15B [For outdoor installation only] Cooling capacity (50/60Hz): 37kW Operating ambient temperature range: -20 to 45°C Operating liquid temperature range: 5 to 35°C Temperature control accuracy: ±1.0°C ■ Maximizes the use of natural energy and achieves significant energy savings ■ Usable even in environments as low as -20°C ■ Can be installed as a modular chiller with up to 10 units connected (150HP)

• air conditioning

【Multi Cyclone】 ◆Zero Corrosion - Uses a transparent polycarbonate shell and glass-reinforced PP and PVC adapter. - Can handle seawater and hot spring wastewater (please use below 55℃). ◆No Filter Replacement Needed - Features a centrifugal cyclone structure without an internal filter, eliminating the need for replacement parts. - Simply open the drain valve during operation to discharge dirt. ◆High Efficiency Separation Capability - By multi-structuring the cyclone section, centrifugal force is increased compared to traditional single structures, enhancing separation capability. - Capable of separating not only large sand particles (approximately 100 microns) but also fine dirt in powder form down to 20 microns, allowing for the collection of pollen and rust. ◆Easy Installation - Lightweight, making it easy to install with resin hoses or PVC piping. 【Usage Precautions】 ■Separation Targets: Solid Objects (Size: 2mm to 2μm, Specific Gravity: 1.5kg/L or more) - Examples of separable items [✓]: Sand / Volcanic Ash / Blast Powder / Rust Powder / Calcium Scale - Examples of non-separable items [×]: Oil / Slime / Foam *High-viscosity substances can easily accumulate, leading to malfunctions. ■Usable Water Temperature Range: Water Temperature 0℃ to 45℃

• Other consumables

◆SAFE: Powerful hydrochloric acid that can be touched with bare hands Despite having a pH of less than 0.6, safety is ensured even if touched (you can be assured in case of accidental contact). If it accidentally comes into contact with the skin, it can be easily removed with water, allowing for safe cleaning operations. *Please be sure to wear protective gear during actual work.* ◆FAST: Extremely rapid calcium (water scale) dissolution and removal speed Developed to significantly improve the processing speed, which is a drawback of conventional products, the reduction in cleaning time translates to a reduction in labor costs, which is our strongest point. It allows for effective cleaning without using hydrofluoric acid (designated as a hazardous substance). ◆LOW CORROSIVE: Low metal corrosion In conventional chemical cleaning, the non-conductive film on the stainless steel surface inside the equipment is stripped away, necessitating the use of treatment solutions to re-form the film on the metal surface. The Dynamic Descaler has low metal corrosion, so treatment solutions are not required on the metal surface. (After cleaning, be sure to perform sufficient flushing with water.) [Recommended] Suitable for plate heat exchangers (no issues with rubber gaskets such as NBR, EPDM, etc.)

• detergent

The "Automatic Reaction Tester" is a multipurpose automatic reaction device that meets the high-precision temperature control and droplet control required for synthetic reaction experiments. It is a standard type that does not take up much space when installed on a laboratory bench or low-height draft. The low-height type is suitable for installation within a regular draft. We also have demo units available, so please feel free to contact us if you are interested. 【Features】 ■ Significant labor savings for reaction experiments ■ Accurate basic data for reaction tests can be obtained ■ Multi-channel control is possible with PC connection ■ Switching between heating and cooling control methods is also possible *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

The "Online Melt Indexer" is an online resin viscometer that continuously measures the MI value (MFR value) of resin viscosity. It reduces the effort and time compared to measurements taken through offline sampling. This helps stabilize the product. We offer a standard model "AVS-10S," a return type "AVS-10R," and an explosion-proof type "AVS-10F." 【Features】 ■ Continuously measures the MI value (MFR value) of resin viscosity ■ Reduces management effort ■ High-precision MI value (MFR value) that faithfully adheres to JIS standards due to its capillary low-pressure design ■ Remote monitoring and safety devices included ■ Ventilation type with internal pressure purge, suitable for use in Class II hazardous locations (explosion-proof type only) *For more details, please refer to the PDF materials or feel free to contact us.

• Viscometer

The "CS Series" is a device that uses load cell technology for weight detection, enabling the rapid automatic weighing and mixing supply of various types of liquids according to set ratios. It widely accommodates the liquid blending required in production lines, contributing to improvements in quality and productivity. Additionally, the device can be manufactured in various specifications, and in addition to the standard functions of an automatic liquid mixing and stirring device, we will create blending equipment tailored to your specific needs. 【Features】 ■ Compatible with a wide range of liquids (main agents, hardeners, additives, solvents, etc.) ■ Device manufacturing possible in various specifications ■ Achieves accurate blending with a unique weighing control method ■ Continuous automatic operation with set blending ratios and total weight *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

The "Transport X2" is a portable oil gas and moisture analysis device capable of measuring seven diagnostic gases and moisture content in the insulating oil inside oil-filled transformers. Kelman(TM) Transport X2 is a portable "lab in a box" that enables detailed analysis/diagnosis on-site, significantly reducing the required time. 【Features】 ■ Fast measurement time of approximately 30 minutes ■ Measurement and diagnosis of seven gases and moisture content in insulating oil ■ Compatible with mineral insulating oil and new ester-based liquids (natural and chemically synthesized) ■ Evolved optical-acoustic spectroscopy technology (4th generation) based on 20 years of DGA experience ■ Integration with GE's single gas online DGA monitoring product line *For more details, please download the PDF or feel free to contact us.

• Analytical Equipment and Devices

The "Kelman DGA900" is an online multi-gas oil analysis device equipped with multi-gas diagnostics that alerts to remote alerts and deterioration of transformer conditions. There is no longer a need to go on-site for manual oil sampling, contributing to faster decision-making. 【Features】 ■ Enables condition-based maintenance and asset replacement with reliable data ■ No need for consumables or frequent recalibration to operate at optimal performance ■ The new "Rapid Mode" provides near real-time insights into rapidly developing faults ■ Enhanced computing power and scalability for flexible transformer condition monitoring solutions ■ Compatible with mineral insulating oil and newer ester-based fluids *For more details, please download the PDF or feel free to contact us.

• Analytical Equipment and Devices

The "Hydran M2-X" is a monitoring solution that continuously monitors gas and moisture levels in oil, alerts users to potential failures, and minimizes unexpected risks. Built on GE Grid Solutions' unique and powerful domain expertise, it provides a monitoring device that requires minimal maintenance due to optimized sensor lifespan. 【Features】 ■ Compact design ■ No moving parts ■ Maintenance-free ■ Enables fleet-level deployment with support for APM software analysis ■ Capable of monitoring a wide range of transformer conditions using mineral-based insulating oil or ester-based fluids *For more details, please download the PDF or feel free to contact us.

• Other security and surveillance systems

PEPO is a cooling device that utilizes temperature difference heat, capable of dehumidifying and cooling without emitting waste heat. It is ideal for preventing heatstroke and managing heat in excessively hot indoor environments. Additionally, as a product that utilizes renewable energy, specifically "temperature difference heat utilization," it is also effective for energy-saving and power-saving measures. ■ No waste heat is emitted It cools using cold water and a heat exchanger, so no waste heat is produced. ■ Does not use refrigerant gas Unlike air conditioners or spot coolers, it does not utilize a refrigeration cycle. ■ Dehumidifies using condensation It does not increase humidity (absolute humidity) like evaporative coolers. ■ Wind speed can be freely adjusted It is equipped with a large fan (φ500) with airflow adjustment functionality. ■ Economical even when left on It consumes only 0.83 kW of power while providing significant cooling capacity. ■ Keep cool before the temperature rises with circulating cooling Its energy-efficient design allows for continuous operation with circulating cooling (intake airflow of 5,500 m3/h). ■ Can also be used for heating purposes By using hot water instead of cold water, it can provide heating as well. *Please feel free to contact us.

• Dehumidifier

AirPEPO is a cooling device that operates solely on compressed air, using water as a heat source, without emitting waste heat, and capable of dehumidifying and cooling by utilizing temperature differences. It is ideal for preventing heat-related illnesses and managing high temperatures in hot and humid factories where machines generate heat, especially in areas where open flames are prohibited. Additionally, when hot water is supplied, it can also be used for heating. 【Do you have any of these concerns?】 ■ In a high-temperature and high-humidity factory with machines that generate heat in a fire-restricted area, there are hardly any options other than spot coolers… ■ While a spot cooler may keep one person cool directly in front of it, the room temperature actually rises due to exhaust heat… It seems there are still options available even in fire-restricted manufacturing environments! * For more details, please feel free to [contact us]. * If you are concerned about air consumption, there is also a hybrid type that operates on both air and electricity. * The use of this device in fire-restricted manufacturing areas may have varying interpretations by the local fire department.

• Other air conditioning equipment

The "HybridAirPEPO" is a water-cooled heating and cooling device that can be used in fire-restricted manufacturing environments. It is low-cost and easy to maintain. It does not use refrigerant gases and utilizes natural water as a heat source for cooling, improving high-temperature and high-humidity environments. Additionally, as a product that utilizes renewable energy through "temperature difference heat utilization," it is also effective for energy-saving and power-saving measures. 【Features】 ■ Usable in fire-restricted manufacturing environments ■ Low-cost and easy to maintain ■ Does not use refrigerant gases, utilizing natural water as a heat source for cooling ■ Improves high-temperature and high-humidity environments ■ Compact and easy to move *For more details, please refer to the PDF materials or feel free to contact us.

• Other air conditioning equipment

The "AL-100" is a highly sensitive liquid level sensor that can be easily connected by simply inserting a tube. It achieves a detection sensitivity of ±1mm. With all-air control, no electrical work is required, making it safe and reliable even in explosive atmospheres. Additionally, it can be easily installed in narrow spaces thanks to the mounting clamp, so you won't have trouble finding a suitable installation location. 【Features】 ■ Easy connection by simply inserting a tube ■ Achieves detection sensitivity of ±1mm ■ Ideal for monitoring overflow and liquid depletion ■ The material of the detection part can be chosen according to customer preference (PFA/SUS, etc. can be used) ■ Compatible liquids: water, oil, chemical solutions, viscous liquids, solvents, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Area Sensor

The "Pump Feeder Unit" is a device that streamlines and enhances the precision of small-scale mixing of multiple raw liquid materials. It can automate the mixing of a total of several dozen to several thousand cc. This minimizes the mixing errors that occur during manual mixing processes. We use an electronic balance for weighing, which is done through "receiving measurement," ensuring high-precision weighing. 【Features】 ■ Streamlines and enhances the precision of small-scale mixing of multiple raw liquid materials ■ Automates the mixing of a total of several dozen to several thousand cc ■ Minimizes mixing errors that occur during manual mixing processes ■ Improves work efficiency through data management of recipes, measurement values, and history *For more details, please refer to the PDF document or feel free to contact us.

• Weighing Control

This product is a quantitative dropper pump that enables precise and reproducible experiments with reliable drop dispensing. By setting the motor speed and stroke scale, it can dispense monomers, catalysts, etc., with high precision. The dispensing amount can be controlled by an external signal. Additionally, the dispensed data can be confirmed and saved, and it allows for multiple dispensing with customizable settings for time, amount, and speed. 【Features】 ■ Fully self-priming and compact ■ Enables reproducible experiments ■ Dispensing amount can be controlled by external signals ■ Dispensed data can be confirmed and saved *For more details, please refer to the PDF document or feel free to contact us.

• Weighing Control

The "Touch Panel Drip Controller" is a system that automates drip experiments by connecting our quantitative drip pump and electronic balance through a dedicated control controller. It allows for the connection of up to 8 channels, with the capability to individually specify the set amounts for up to 8 steps. Operational data, including both set amounts and drip amounts, can be saved in CSV format. Additionally, it is more compact than a typical laptop, making it easy to move and relocate. 【Features】 ■ Progress can be monitored on the screen ■ Touch or mouse operation on the panel is possible ■ Compact ■ Easily expandable ■ Can be connected to other manufacturers' quantitative pumps *For more details, please refer to the PDF document or feel free to contact us.

• controller

The "WLF-2000 Series" is a coating amount monitoring system that can measure the coating amount (g/m²) in real-time. It can be measured simply by installing a platform scale under the intermediate tank, so there is no need to modify the existing coating process. Additionally, the coating amount value is output as an analog signal, allowing it to be used as a sensor. 【Features】 ■ Real-time measurement of coating amount (g/m²) ■ No modification of the existing coating process is necessary ■ Explosion-proof design (control panel is air-purged) ■ Easy cleaning as the coating liquid does not come into direct contact with the measurement area ■ Value settings can be easily input via the touch panel on the monitor screen *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "3 Liquid Pump Feeder Unit" is a feeder unit that allows for automatic measurement and dispensing of multiple liquids, with feedback from an electronic scale for each liquid. By simply setting the dispensing amount for each liquid and pressing the start key, it can automatically measure and dispense up to three liquids, one at a time. This contributes to labor reduction and shorter work times. 【Features】 ■ Labor reduction ■ Shortened work time ■ Consistent measurement without individual variation *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments