アールアンドアール List of Products and Services

The "Hasamaren-bou" is a safety device designed to prevent contact and pinching accidents in advance. When the sensor comes into contact with a structure, it alerts you to danger with sound and light. When force is applied to the detection bar, it rapidly flashes blue and simultaneously emits a buzzer sound. The direction of the detected force can be vertical (from above) or horizontal (360°). 【Features】 ■ Detects contact from both vertical and horizontal directions ■ Easy installation on poles and pipes *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

We would like to introduce the "Electric Low Lift" that we handle. By adopting an AC motor, it achieves smooth operation. Despite its compact size, it powerfully handles heavy tasks. The load capacity is 3,000 kg, with a maximum height of 85 mm, forks measuring 685 mm in width, 1,220 mm in length, and 335 mm in inner width. Please feel free to contact us if you have any inquiries. 【Features】 ■ Load capacity: 3,000 kg ■ Maximum height: 85 mm ■ Forks: Width 685 mm, Length 1,220 mm, Inner width 335 mm ■ Operation method: Walkie model *For more details, please refer to the PDF document or feel free to contact us.

• lift

We would like to introduce the "Rebar Tying Machine" that we handle. It features a twin tie mechanism that feeds two wires simultaneously, achieving a tying time of under 0.7 seconds. The wire forms a loop during tying and is pulled back, resulting in a tying strength that is 1.5 times greater. Additionally, it has a mechanism that bends the tips of the cut wires, reducing the height of the loops by half. There are no protruding ends at the bottom. 【Features】 ■ Twin tie mechanism ■ Pull-back mechanism ■ Tip bending mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Binding/Packing Machine

We offer "lightweight vibrators." We have a lineup that includes "lightweight punches" suitable for air bubble removal and surface finishing on slopes, as well as "lightweight trowels" ideal for thin concrete products like retaining walls and U-shaped gutters. Please feel free to contact us if you have any requests. 【Product Lineup】 ■ Lightweight Punch ■ Lightweight Wall Vibrator ■ Lightweight Trowel ■ Lightweight Tamper ■ Lightweight Wedge *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

"Watas" is a water absorption roller that can absorb the equivalent of 8 bottles of water in a 2-liter PET bottle. By simply lowering the drainage nozzle on the main unit, you can easily perform drainage work and dispose of it immediately. The sponge has been processed at an angle and equipped with Velcro, making the replacement process even easier. (The sponge is sold separately.) 【Features】 ■ Absorbs 16 liters of water ■ Easy drainage ■ Convenient for carrying ■ Simple sponge replacement *For more details, please refer to the PDF document or feel free to contact us.

• roller
• Other cleaning tools

The "One Picker" is a panel sorting machine that can be loaded onto a cart in both horizontal and vertical positions. All operations are manual, allowing for excellent workability regardless of location. It can be compactly folded, making it possible for one person to load and unload it onto and from a vehicle. It features a stopper with a 25mm pitch to accommodate panel thickness, and it is easy to handle as it does not exert force beyond a certain pressure. 【Features】 ■ Easy clamp operation ■ Lightweight (total weight 129kg) ■ Can be lifted with a baby winch ■ Can also be transported using a construction elevator ■ Folds compactly *For more details, please refer to the PDF document or feel free to contact us.

• Sorting machine
• Other conveying machines

The "CG102MCS" is a hammer knife mower equipped with a wide cutting width of 800mm, all in a compact design. It features a maximum output of 10 horsepower with an OHV gasoline engine. Additionally, the control levers are concentrated at your fingertips, making operation easy. Furthermore, the cutting height can be easily adjusted within a range of 0 to 100mm using the height adjustment handle, and the cutting blade (hammer knife) is made of special steel, providing excellent sharpness and durability. 【Features】 ■ Exceptional stability on slopes and uneven terrain with crawler tracks ■ Compact design with a wide cutting width of 800mm ■ Cutting blade (hammer knife) made of special steel for excellent sharpness and durability ■ Easy adjustment of cutting height within a range of 0 to 100mm ■ Equipped with a maximum output of 10 horsepower OHV gasoline engine *For more details, please refer to the PDF document or feel free to contact us.

• cutter

The "Walkie" is an electric forklift that can easily handle loading, unloading, moving, and stacking while being operated on foot. It can be used without driving skill training. (However, special education conducted by the operator is mandatory.) You can charge it simply by plugging the automatic retractable reel cord into a 100V power source. 【Features】 ■ One-touch forward and backward movement ■ Automatic onboard charger ■ Rear tilt mechanism available *For more details, please refer to the PDF materials or feel free to contact us.

• lift
• palette
• Other conveying machines

We would like to introduce the "Battery-Powered Power Lifter" handled by R&R Corporation. It has the elements of a forklift and is suitable for loading and unloading at high positions. It comes standard with an emergency shut-off device. Please feel free to contact us when you need assistance. 【Features】 ■ Up and down movement with one-touch operation of the lift lever ■ Comes with a 2m charging power cord reel ■ Standard equipped with an emergency shut-off device *For more details, please refer to the PDF materials or feel free to contact us.

• lift

The "HDS1000De Weed" is a hot water weeding system that combines a hot water high-pressure washer with a weeding nozzle, ejecting near 100°C hot water from the nozzle tip to kill weeds. It efficiently eradicates weeds by delivering heat to the roots of the plants. The burden on the operator is reduced, and weeding can be performed anytime without being affected by the weather. 【Features】 ■ High cleaning power ■ High fuel efficiency ■ Cost reduction ■ High durability ■ Ease of operation *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner
• nozzle

The "BTT510/2E" is a battery-operated T-shaped grass trimmer that is recommended for mowing grass in parking lots, streets, and parks due to its minimal stone scattering. It automatically adjusts the cutting speed in two stages according to the amount of grass. By moving it back and forth, you can mow in a reciprocating manner, making it easy to trim grass with a vacuum cleaner-like feel. 【Features】 ■ T-shaped arrangement of the trimmer in the cutter section ■ Equipped with an auto-boost function *For more details, please refer to the PDF document or feel free to contact us.

• Power tools

The GS-738C2 is a gas nailer that uses a battery pack as its power source, igniting a mixture of fuel gas and air inside the machine with electric fireworks, and using that energy to drive nails. It is capable of nailing from concrete to thin steel plates. Cordless and easy to handle, it also boasts high power driving force. 【Features】 ■ High power and lightweight at 3.7 kg ■ Improved operability, easy to use with one hand ■ Short push and slim tip design ■ A rich lineup of 11 types of pins ■ Can drive over 500 pins with one gas cartridge *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Moon Lifter" is a balancer that operates on AC100V. It detects force and assists in lifting. A power assist device that allows you to move heavy objects with light force. Even heavy objects of different weights can be balanced with just one touch. While balancing, you can hold and move the heavy object with light force, making it operable by anyone. 【Features】 ■ Positioning in millimeter increments ■ Can work with both hands ■ No problem if the weight of the object changes ■ Slowly descends until it detects grounding *For more details, please download the PDF or feel free to contact us.

• Balancer

We offer soundproof panels with an easy-to-assemble panel joint system. The "FX-1000" can be arranged in various ways according to its application and target size. The "FX-1000HR" is designed for heat resistance against engine-equipped devices such as generators, specializing in noise reduction. Please feel free to contact us when you need assistance. 【Product Lineup】 ■FX-1000 1200×900 ■FX-1000 1200×1200 ■FX-1000HR 1200×900 ■FX-1000HR 1200×1200 *For more details, please download the PDF or feel free to contact us.

• Other packaging materials

We would like to introduce the "Mortar Mixer" that we handle. This large mixer is suitable for mixing materials ranging from horticultural potting soil to mortar. It comes with a safety cover to protect against dangerous accidents during material loading and mixing. Please feel free to consult us when you need assistance. 【Specifications (excerpt)】 ■ Drive method: Three-phase geared motor 200V, 3.7KW, 4P ■ Switch: ON/OFF push button (with built-in breaker) ■ Wheelbarrow attachment: Not possible ■ Weight: 380kg *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

We would like to introduce the "Electric Wire Upper" that we handle. By folding one leg and bringing it close to the wall, it allows for work against the wall. The one-touch folding leg is of the caster type, and the casters can be finely adjusted. Additionally, a level is placed on the outside of the main body, allowing for constant verification of the mast's horizontal position, and the casters can be folded for space-saving storage. 【Features】 ■ Easy installation ■ Easy movement ■ Precise operation *For more details, please download the PDF or feel free to contact us.

• Other work tools

We would like to introduce our "Big Fan." It is suitable for air circulation and ventilation in large spaces, as well as for moisture and heat countermeasures. If the motor overheats, it will automatically stop, and it will restart when the temperature drops. It is easy to move with wheels. Please feel free to consult us when you need assistance. 【Features】 ■ The switch only toggles between "On" and "Off" ■ Uses a motor with a thermal protector (resettable heating protection device) ■ Angle adjustment in the vertical direction is possible *For more details, please download the PDF or feel free to contact us.

• fan

"ZEST" is a de-icing agent spreader that enhances the precision and safety of spreading snow-melting agents and anti-freezing agents. It evenly distributes the appropriate amount, providing high cost performance. Equipped with a wireless remote control, it allows operation of the spreading work without getting out of the driver's seat. 【Patent Obtained】 With our unique technology "Knocker" and "Anti-Clogging Plate," it enables clog-free spreading. 【Features】 ■ Wireless remote control ■ Battery wiring ■ One-touch attachment and detachment ■ Five-step settings for spreading width of 3 to 7 meters, adjustable every 1 meter ■ Spreading amount adjustment *For more details, please download the PDF or feel free to contact us.

• wheel

The "EL-FBS201(K/E/N)" is a lighting fixture that can be used in environments with a lot of dust or in outdoor facilities with high humidity during rain. It features reliable components from major manufacturers and safe materials. Additionally, we also offer the 20W two-lamp model "EL-FBS202(K/E/N)", the 40W one-lamp model "EL-FBS401(K/E/N)", and the 40W two-lamp model "EL-FBS402(K/E/N)". 【Features】 ■ G13 socket (made by BJB) ■ Suitable for indoor and outdoor use ■ Rated voltage AC100/200V ■ All units are inspected in-house, and stock is always available ■ Fixtures can be provided only ■ Single-sided wiring and double-sided wiring are possible *For more details, please refer to the PDF document or feel free to contact us.

• Other lighting equipment

The "EL-FBS201(K/E/N)" is a lighting fixture that can be used in dusty environments and facilities with high humidity outdoors, even in rainy conditions. It features reliable components from major manufacturers and safe materials. Additionally, we also offer the 20W two-lamp model "EL-FBS202(K/E/N)", the 40W one-lamp model "EL-FBS401(K/E/N)", and the 40W two-lamp model "EL-FBS402(K/E/N)". 【Features】 ■ G13 socket (made by BJB) ■ Suitable for indoor and outdoor use ■ Rated voltage AC100/200V ■ All units are inspected in-house, and stock is always available ■ Fixtures can be provided only ■ Single-sided wiring and double-sided wiring are possible *For more details, please refer to the PDF document or feel free to contact us.

• Other lighting equipment

The "MS-680N5-H" is a sander that rotates the pad while simultaneously performing a circular motion with the entire pad. It starts operating simply by pressing the throttle lever and stops when released. The adjustment of the rotation speed is done via a regulator (which reduces the pressure of compressed air created by an air compressor from high pressure to low pressure). 【Specifications (excerpt)】 ■ Pad size: φ125mm ■ Orbit diameter: 5mm ■ No-load rotation speed: 12,000rpm ■ Air inlet: PT1/4 ■ Hose inner diameter: 1/4in (6.35mm) *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment

The "Block Vice FF Type" is a concrete clamp that can be used for both manual and machine operations, designed to handle pedestrian and boundary blocks as well as tombstones. The shackle position can be adjusted according to the gripping width, allowing for smooth operation without strain on the lifting equipment. Additionally, four reinforced rubber narrow contact plates on each side, totaling eight, work uniquely to grip firmly, eliminating concerns about falling, cracking, or scratching. 【Specifications】 ■ Rated capacity: 300kg ■ Weight: 20kg ■ Gripping width: 150–550mm ■ Adjustment holes: 4 ■ Shackle hole positions: 2 *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

The "TPB-40SV" is a heavy-duty breaker used for tasks such as road and building foundation demolition, particularly for breaking high-compression strength concrete. The realization of low vibration significantly increases the working time. Additionally, it reduces the unique exhaust sound of air breakers and incorporates a freeze prevention mechanism to prevent operational troubles caused by freezing. 【Features】 ■ Complies with the vibration disorder prevention guidelines (Ministry of Health, Labour and Welfare) ■ Absorbs vibrations during impact with a special damper mechanism ■ Chisel attachment is possible with a one-touch operation ■ Hexagonal shank type *For more details, please refer to the PDF materials or feel free to contact us.

• Crusher

We would like to introduce our "Battery-Powered Nail Gun." With a single charge, it can drive up to 400 nails. It can be used for fastening cables and conduits to floors, walls, and ceilings made of concrete, stone, and steel. We also offer a "Gas-Powered Nail Gun" with a striking force of 100J, so please feel free to contact us if you need assistance. 【Specifications (Excerpt)】 ■ Striking Force: 85J ■ Voltage: 21.6V ■ Number of Nails Driven on Full Charge: 400 ■ Maximum Firing Rate: 1.3 shots/second ■ Battery Capacity: 2.6Ah *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "DRC-5136BLH" is a cordless chip saw cutter equipped with a high-power brushless motor. It achieves cutting speeds equivalent to 100V with a 36V high-power battery. By using a clamp, it can make perpendicular cuts on rebar with diameters ranging from D32 to D51mm. By using a cover with a guide, it can efficiently cut off reinforcing bars and anchor bolts flush at approximately 20mm from the surface. 【Features】 ■ Equipped with a high-power brushless motor ■ Compatible with threaded rebar ■ Can be converted to a flush cutter with the installation of a guide cover ■ Multi-volt 36V ■ Mode switching function included *For more details, please refer to the PDF materials or feel free to contact us.

• cutter

The "HDS1000De" is a hot water high-pressure cleaner that uses a diesel engine, allowing work to be done even in locations without power as long as there is water available. It is a high-power model that effectively cleans stubborn dirt stuck to heavy machinery and materials. The control panel is simple and easy to understand, making it accessible for anyone to operate. Additionally, this product can be used for "hot water weeding" by combining it with a weeding nozzle, which discharges nearly 100°C hot water from the nozzle tip to kill weeds. 【Features】 ■ Equipped with a diesel engine ■ High-performance boiler with low fuel consumption and reduced exhaust emissions ■ Sturdy frame that securely protects the main unit ■ Easy-to-understand control panel ■ Weeding nozzle for hot water (optional) also available *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner

The "Hand Pallet (Standard Type/Low Profile Type/Super Low Profile Type/Quasi-Stainless Type)" is a product equipped with an automatic load check valve to prevent overloading during lifting. It features a lightweight and functional resin handle. With OPK's original no-packing hydraulic pump and a one-touch neutral lever, it allows for easy movement and operation even under load. Additionally, we offer a "Side Movement Compatible Type" that enables lateral movement while still on the pallet, proving effective for transporting long items in narrow spaces. 【Features】 ■ Smooth handling due to the lightweight steering wheel ■ Built-in valve cleaning device to maintain normal valve condition ■ The quasi-stainless type has a stainless steel frame, handle, and axle components, while other parts are finished with nickel-chrome plating ■ A side movement compatible type with a stopper for 90° turning on the handle is also available *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines

The RB36DA is a cordless blower equipped with a selectable air volume switch function, providing a working time of 9.5 minutes per charge (Mode 4) to suit your tasks. With a high-efficiency brushless motor and a compact, lightweight, high-output multi-volt battery, it increases work efficiency. Its easy handling allows for efficient operation. Additionally, by adopting an axial fan design, it achieves a large air volume comparable to that of engine blowers, despite being cordless. 【Features】 ■ Ample work volume per charge ■ Large air volume comparable to engine blowers ■ Selectable air volume switch function to match tasks ■ Lightweight and compact body ■ Easy handling for efficient operation *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

We would like to introduce the electric breaker 'TE 3000-AVR' handled by R&R Corporation. This low-vibration model thoroughly reduces vibration exposure to operators during long hours of use, dramatically improving work productivity. With its surprisingly quiet operation, the electric chipping method allows for the completion of scheduled processes without the need for extensive protective measures in noise-sensitive environments. Since there is no concern about the splattering of lubricating oil typical of electric tools, it enables chipping work without dirtying the site or worrying about oil odors. 【Features】 ■ Thoroughly reduces vibration exposure to operators during long hours of use ■ Dramatically improves work productivity ■ Maintains surprisingly quiet operation with electric chipping method ■ No concern about splattering of lubricating oil typical of electric tools ■ Enables chipping work without dirtying the site or worrying about oil odors *For more details, please refer to the PDF document or feel free to contact us.

• Power tools

We would like to introduce the manual wire upper 'W390' handled by R&R Co., Ltd. It is wire-operated, manual, foldable, and features movable casters with a diameter of 200mm and brakes. The front casters are equipped with double casters that can handle high loads. With a maximum load capacity of 200kg, it can be loaded into a light van. Optional accessories include extended forks for transporting deeper cargo and pipe baskets for transporting pipes, ducts, etc. 【Features】 ■ Maximum load capacity of 200kg ■ Wire-operated, manual, foldable ■ Movable casters with a diameter of 200mm and brakes ■ Front casters equipped with double casters for high load capacity ■ Can be loaded into a light van *For more details, please refer to the PDF document or feel free to contact us.

• lift

We would like to introduce the battery-powered rammer 'MT-e55' handled by R&R Corporation. It features a bellows with a mesh rib structure on the inside, achieving a stable compaction stroke that is resistant to twisting, as well as a wear-resistant foot formed by pressing a metal sheet of high-tensile steel into the shape of the bottom surface, made from beech laminated material that excels in hardness and toughness. In addition to a three-stage speed selection that can be chosen according to the subgrade conditions and work content, it has excellent operability with a single push of a switch to start and stop. 【Features】 ■ Equipped with an electric power unit ■ Does not pollute the air with exhaust gases ■ Comes with protection for the motor/harness, protectors, and fan guards ■ Three-stage speed selection available according to subgrade conditions and work content ■ Excellent operability *For more details, please refer to the PDF document or feel free to contact us.

• Power tools

Introducing the cordless random sander 'SV1813DA' handled by R&R Corporation. Dust collection adapters (A)/(B) are included as standard. It can be connected to various dust collectors and offers a grinding capacity equivalent to or greater than AC products (approximately 114%). With a brake function, the rotation speed can be set to six levels using a variable speed dial. The rotation speed can be adjusted according to the material of the finishing surface and the application. 【Features】 ■ Can be connected to various dust collectors ■ Grinding capacity equivalent to or greater than AC products (approximately 114%) ■ Approximately 80% high dust collection rate ■ Rotation speed can be set to six levels using a variable speed dial ■ Rotation speed can be adjusted according to the material of the finishing surface and the application *For more details, please refer to the PDF document or feel free to contact us.

• Power tools

We would like to introduce our U-shaped scale "New Derby," which allows you to save data. By placing a sturdy pallet or similar item on top, you can create a fully functional digital platform scale that is also compliant with certification standards. When not in use, it can be stored leaning against a wall or similar surface, so it does not occupy a specific space. 【Features】 ■ Data can be saved ■ Certification compliance is possible ■ Can be stored without taking up space ■ Does not create dead space *For more details, please refer to the PDF document or feel free to contact us.

• Scale

We would like to introduce our portable type "MUFB Ultra Pump." We offer two models: a "battery-operated" version for easy maneuverability and a "power-operated" version with a 30L tank for long hours of operation. This product can generate an ultra-high concentration of ultra-fine bubbles, with several hundred million bubbles in just 1ml of water. 【Features of the Battery-Operated Model】 ■ Usable in locations without power outlets ■ Removable battery for easy replacement with a spare battery ■ Tank capacity: 15 liters ■ Available in two types: backpack style or portable cart *For more details, please refer to the PDF document or feel free to contact us.

• Pure water production equipment

The "KT-10" is a collapsible tripod for lifting. It has a permissible load of 1 ton when the load is evenly distributed across the three legs and the ground angle is 70 degrees or more. It is suitable for lifting heavy objects in places without crane facilities. It is useful for emergency rescue during disasters such as earthquakes or accidents, as well as for moving gravestones and uprooting trees. 【Features】 ■ Collapsible, easy to assemble, no tools required ■ Permissible load of 1 ton when the load is evenly distributed across the three legs and the ground angle is 70 degrees or more ■ Can be shipped in a portable storage bag ■ Total length: 2.5M * For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "SJF-300RS-2" is a robust body (casing) blower. The "bell mouth," which helps to regulate and stabilize the airflow, can be easily removed. It is equipped with a motor protection device (automatic reset thermal protector) that protects against motor overload and abnormal current. 【Features】 ■ Single-phase 200V specification, diameter 300mm ■ Safety mechanism ■ Sturdy body (casing) ■ Bell mouth *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The ML814 is a rechargeable tower light that can adjust its height with an extendable pipe. Simply press the tripod opening button while spreading the legs to extend to your desired height for quick setup. Removal is also easy. Illumination from a closer distance improves visibility at hand, enhancing work efficiency. 【Features】 ■ Targeted spot lighting ■ Wide area illumination for specific ranges ■ Quick setup ■ Height adjustment with extendable pipe *For more details, please refer to the PDF document or feel free to contact us.

• Other lighting equipment

The "GP 2V (SC)" is a hand grinder that can use shaft-mounted grinding wheels with shaft diameters of φ3 and φ6. The rotation speed of the grinding wheel can be continuously adjusted from 15,000 to 30,000 RPM. It has a built-in electronic circuit. The dial marking "1" represents the lowest speed, while marking "5" represents the highest speed. Please use it at a rotation speed suitable for your working conditions. 【Features】 ■ Compact and lightweight, easy to use ■ Stepless speed adjustment with a dial, ideal for additional processing and finishing grinding tasks ■ Compatible with shaft-mounted grinding wheels of φ3 and φ6 ■ Equipped with a spindle lock mechanism for easy replacement of shaft-mounted grinding wheels *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "CN16SA" is a nibler with a minimum cutting radius of 40mm. It can cut without being hindered by steps. It is suitable for cutting steel plates, stainless steel, and window cutting work. It comes standard with a hexagon anti-spanner (2.5mm and 4mm) for punch tightening, a punch (998030), and a die (998039). 【Cutting Capacity】 ■ Steel Plate: 1.6mm ■ Keystone Plate: 1.2mm ■ Minimum Cutting Radius: 40mm *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "Tamago Spot" is an LED floodlight that illuminates a wide area of over 180°. It is shock-resistant and highly durable. The LED elements are protected by "polycarbonate resin," which boasts 150 times the strength of reinforced glass. With an IP54 equivalent waterproof rating, it is resistant to rain, and the angle of illumination can be independently adjusted up and down, left and right for each light. 【Features】 ■ Wide illumination with flexible angles ■ Shock-resistant and highly durable ■ IP54 equivalent waterproof rating for rain resistance ■ Width of 550mm, easy to fit in narrow spaces ■ Stacking allows for even more space-saving *For more details, please refer to the PDF document or feel free to contact us.

• Other lighting equipment

The "GP36DA (XP)" is a cordless hand grinder that can be used in high places and at job sites without power. It features two selectable modes for speed adjustment. The "Variable Speed Mode" maintains the rotation speed, while the "Auto Mode" automatically adjusts the rotation speed, allowing for changes according to the application. Additionally, it is equipped with a brake function and a restart prevention function. 【Features】 ■ Soft start ■ Brake function ■ Kickback reduction ■ Restart prevention function ■ Speed adjustment available (two selectable modes) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Rental/lease

The "CD3607DA (WP)" is a cordless chip saw cutter equipped with a kickback lightweight system. It features a dust-proof mesh filter that reduces the intrusion of iron powder into the main body through the air vent. Additionally, it has a one-touch detachable dust cover that allows for easy discharge of chips by simply pressing the release lever. 【Features】 ■ Equipped with a kickback lightweight system ■ Uses a dust-proof mesh filter ■ Suitable for noise-sensitive work (silent mode) ■ Lightweight magnesium dust collection box ■ Reduces the intrusion of iron powder into the main body through the air vent *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Rental/lease

The "R36DA (SC)" separates large debris and air using a large cyclone, and then separates fine debris with a small cyclone (10 cylinders). The remaining fine particles are captured by a functional (HEPA) filter. As a result, the filter is less likely to clog, and strong suction power is maintained. 【Features】 ■ High-performance (HEPA) filter ■ Notification lamp ■ Panel switch ■ One-touch waste disposal *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning tools
• Hand cleaner
• Rental/lease

The "LUL-36LI-CH" is a rechargeable LED uplight that can switch between four brightness levels: 100%, 70%, 35%, and 10%. The LED is 36W with a rated luminous flux of 5500Lm. The battery is a 12.8v12Ah lithium-ion phosphate (LiFePO4). It is suitable for both indoor and outdoor use, allowing for bright and safe work during road construction, temporary construction, interior work, and more. 【Continuous Lighting Time】 ■100%: 4 hours ■70%: 5.5 hours ■35%: 12 hours ■10%: 39.5 hours *For more details, please refer to the PDF document or feel free to contact us.

• LED fluorescent lamp

"e-WASH" is a cleaner generated by electrolyzing tap water, and it can be used in pet shops, pet salons, veterinary clinics, and of course, in private homes. The composition consists of 99.83% pure water and 0.17% potassium hydroxide. With a pH of 12.5, it is filled with hydrogen ions that provide strong alkaline properties, resulting in excellent cleaning effects that rival synthetic surfactants, along with the ability to emulsify fats. We offer a spray bottle (500mL) and a foam pump bottle (500mL). 【Features】 ■ The composition is 99.83% pure water, making it safe for use on pets. ■ It has anti-rust effects when used for cleaning cages, helping to prevent deterioration. ■ It can also be used for grooming supplies. ■ Mixing it with shampoo enhances the shine of the coat. ■ It can be used for teeth cleaning, removing plaque and preventing cavities. ■ It can be used for disinfecting hands and fingers when holding pets. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products