甲南精工 List of Products and Services

The Teflon piping "Synergy System" is a system that enables chemical cleaning under conditions that were impossible with other materials. It allows for steam sterilization at a high pressure of 359 kPa, equivalent to a temperature of 149°C under saturated steam. It fully complies with FDA/USP/3-A/USDA standards. 【Features】 ■ Can withstand normal SIP and CIP cycles ■ Ideal for handling corrosive media without discoloration or perforation against most chemicals ■ Minimal extraction of metal ions ■ Lower running costs compared to stainless steel piping materials ■ Semi-transparent, allowing for visual inspection of fluids ■ Difficult for biofilms to adhere ■ Improved productivity due to reduced cleaning time ■ Easy on-site beadless welding construction ■ Excellent weather resistance Additionally, it is suitable for handling proteins, which are the most sensitive and fragile to metals. *For more details, please contact us or view the PDF data from the download. *The catalog is available in PDF format only. Thank you for your understanding.

• Other food factory equipment and parts
• Other mixing machines and tanks

The Teflon heat exchanger is a customized case that uses Teflon piping. All surrounding piping was handled by Konan Seiko Co., Ltd. at the request of the user. We respond to all user inquiries, from equipment manufacturing to the customization of Teflon piping. For more details, please contact us or download the catalog. *The catalog is available in PDF format only.

• Piping
• Piping Materials
• Piping and Piping Parts

This is an introduction to Teflon pipe fittings of different diameters. It is a piping material developed to prepare for high pressure conditions based on user requirements. Konan Seiko responds to all inquiries from users. For more details, please contact us or download the catalog. *The catalog is available in PDF format only.

• Piping
• Piping Materials
• Piping and Piping Parts

This is an example of 10A piping materials. It is a small-diameter 90° and 45° elbow, and a reducer made according to the user's request. Kōnan Seiko responds to all inquiries from users. For more details, please contact us or download the catalog. *The catalog is available in PDF format only.

• Piping
• Piping Materials
• Piping and Piping Parts

The "KS-6000" is a marshmallow-like sealing gasket made from specially processed PTFE. It is flexible and strong, and it excels in heat resistance and chemical resistance, which are characteristics of PTFE. To make it easier to work with, it has adhesive tape on one side. [Features] ■ Flexible and strong ■ Excellent heat resistance and chemical resistance ■ Adhesive tape on one side *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-1500" is a hatch cover packing for marine chemical tanks, which is made by braiding PP spun yarn into a rectangular cross-section with butyl rubber as the core, and then coating the surface with PTFE fibers. It has excellent chemical resistance, flexibility, and elasticity. 【Features】 ■ Braided PP spun yarn into a rectangular cross-section with butyl rubber as the core ■ Coated the surface with PTFE fibers ■ Excellent chemical resistance ■ Excellent flexibility and elasticity *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-500W(L/LG)" is a packing formed into a ring shape using expanded graphite tape along with wire mesh in a mold. It improves extractability. Please use it in combination with the adapter packing. Additionally, we also offer the molded packing "KS-500WTG," which has been treated for low torque with PTFE and fine graphite. 【Performance Values】 ■ Temperature (℃): 600 *Heat resistance temperature in a non-oxidizing atmosphere (400℃ in an oxidizing atmosphere) ■ Valve Pressure (Mpa): 43.1 ■ Pump ・ Pressure (Mpa): - ・ Peripheral Speed (m/s): - ・ PV Allowable Value: - ■ Motion Equipment (Rotating) ・ Pressure (Mpa): - ・ Peripheral Speed (m/s): - ■ pH Range: 0-14 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-4030(L/LG)" is a non-asbestos packing for high temperature and high pressure, reinforced with Inconel wire and braided into a rectangular cross-section, with its surface coated in gold wire to enhance strength. Additionally, we also offer a non-asbestos packing "KS-4030TG" that has been treated with low torque using PTFE and fine graphite. 【Performance Values】 ■ Temperature (°C): 600 *Heat resistance temperature in a non-oxidizing atmosphere (400°C in an oxidizing atmosphere) ■ Valve Pressure (Mpa): 43.1 ■ Pump ・Pressure (Mpa): - ・Peripheral Speed (m/s): - ・PV Allowable Value: - ■ Motion Equipment (Rotating) ・Pressure (Mpa): - ・Peripheral Speed (m/s): - ■ pH Range: 0-14 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-4000T" is a high-performance packing made by braiding expanded graphite yarn reinforced with Inconel wire into a rectangular cross-section and applying a low-torque treatment with PTFE dispersion. It can be used alone. Additionally, we offer high-performance packing "KS-4000TLG," which has been treated for low torque with PTFE, lubricating oil, and fine graphite, as well as high-performance packings "KS-4010(L/LG)" and "KS-4010T," which are made by braiding expanded graphite yarn into a rectangular cross-section. 【Performance Values】 ■ Temperature (°C): 350 ■ Valve Pressure (Mpa): 25.9 ■ Pump ・ Pressure (Mpa): - ・ Peripheral Speed (m/s): - ・ PV Allowable Value: - ■ Motion Equipment (Rotation) ・ Pressure (Mpa): - ・ Peripheral Speed (m/s): - ■ pH Range: 0-14 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-500(L/LG)" is a packing made by molding expanded graphite tape into a ring shape using a mold. Please use it in combination with the adapter packing. Additionally, we also offer the high-performance non-asbestos packing "KS-4000(L/LG)," which is suitable for high-temperature and high-pressure valve applications, made by braiding expanded graphite yarn reinforced with Inconel wire into a rectangular cross-section. 【Performance Values】 ■ Temperature (℃): 600 *Heat resistance temperature in a non-oxidizing atmosphere (400℃ in an oxidizing atmosphere) ■ Valve Pressure (Mpa): 43.1 ■ Pump ・ Pressure (Mpa): - ・ Peripheral Speed (m/s): - ・ PV Allowable Value: - ■ Motion Equipment (Rotating) ・ Pressure (Mpa): - ・ Peripheral Speed (m/s): - ■ pH Range: 0-14 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-4000(L/LG)" is a high-performance non-asbestos packing made by braiding expanded graphite yarn reinforced with Inconel wire into a rectangular cross-section. It is suitable for high-temperature and high-pressure valve applications. Additionally, we also offer the packing "KS-500(L/LG)", which is formed into a ring shape using expanded graphite tape and a mold. 【Performance Values】 ■ Temperature (°C): 600 *Heat resistance temperature in a non-oxidizing atmosphere (400°C in an oxidizing atmosphere) ■ Valve Pressure (Mpa): 43.1 ■ Pump ・ Pressure (Mpa): - ・ Peripheral Speed (m/s): - ・ PV Allowable Value: - ■ Motion Equipment (Rotating) ・ Pressure (Mpa): - ・ Peripheral Speed (m/s): - ■ pH Range: 0-14 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-83/83W" is a braided packing made of aramid fiber impregnated with PTFE. "KS-83" is suitable for pump applications that dislike oil, while "KS-83W" is suitable for valve applications. Additionally, we offer the packing "KS-83S," which is made by flexibly braiding flame-retardant aramid fibers, impregnating them with PTFE, and finishing with lubricant, as well as "KS-83WS," which is made by braiding flame-retardant aramid fibers in a rectangular cross-section, impregnating them with PTFE, and finishing with lubricant. 【Performance Values】 <KS-83> ■ Temperature (°C): 260 ■ Valve Pressure (Mpa): - ■ Pump - Pressure (Mpa): 1 - Peripheral Speed (m/s): 10 - PV Allowable Value: 6.4 ■ Motion Equipment (Rotating) - Pressure (Mpa): - - Peripheral Speed (m/s): - ■ pH Range: 2-13 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-82" is a non-asbestos packing made by braiding special aramid blended yarn into a rectangular cross-section and impregnating it with PTFE. It can be used for fluids such as fresh water, seawater, and oil-based fluids. Additionally, we also offer the special aramid blended yarn braided packing "KS-82S" with lubricating oil. 【Performance Values】 ■ Temperature (°C): 200 ■ Valve Pressure (Mpa): 10.3 ■ Pump - Pressure (Mpa): - - Peripheral Speed (m/s): - - PV Allowable Value: - ■ Moving Equipment (Rotating) - Pressure (Mpa): 4.9 - Peripheral Speed (m/s): 1 ■ pH Range: 2-12 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-80" is a non-asbestos packing made from high-strength aramid fibers treated with PTFE and lubricating oil, woven in a lattice pattern. It is suitable for slurry fluids. It can be used for wastewater, muddy water, powders, slurry liquids, polymers, air, gases, solvent vapors, heated water, boiler feed water, low-pressure steam, crude oil, heavy oil, and pulp liquids. 【Performance Values】 ■ Temperature (°C): 260 ■ Valve Pressure (Mpa): 10.3 ■ Pump ・ Pressure (Mpa): 2 ・ Peripheral Speed (m/s): 16 ・ PV Allowable Value: 14.7 ■ Moving Equipment (Rotational) ・ Pressure (Mpa): 14.7 ・ Peripheral Speed (m/s): 5 ■ pH Range: 2-13 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-560" is a packing for adjustment valves, made with carbon fiber as the core material and braided with PTFE fibers. It can be used with fluids such as oil, solvents, acids, and alkalis. 【Performance Values】 ■ Temperature (°C): 260 ■ Valve Pressure (Mpa): 5.1 ■ Pump 　・ Pressure (Mpa): - 　・ Peripheral Speed (m/s): - 　・ PV Allowable Value: - ■ Motion Equipment (Rotational) 　・ Pressure (Mpa): - 　・ Peripheral Speed (m/s): - ■ pH Range: 0-14 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-860B" is a non-asbestos packing made by braiding high-strength aramid fibers at the corners and graphite-filled PTFE fibers in the body using a lattice weave. It can be used for valves, pumps, agitators, and screw feeders. It is compatible with fluids such as wastewater, muddy water, powders, slurry liquids, air, gas, solvent vapors, crude oil, and heavy oil. 【Performance Values】 ■ Temperature (°C): 260 ■ Valve Pressure (Mpa): 10.3 ■ Pump - Pressure (Mpa): 2 - Peripheral Speed (m/s): 20 - PV Allowable Value: 14.7 ■ Motion Equipment (Rotational) - Pressure (Mpa): 9.8 - Peripheral Speed (m/s): 5 ■ pH Range: 2-13 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-60(FS)" is a packing made by braiding PTFE fibers into a rectangular cross-section and impregnating them with PTFE dispersion. It has excellent chemical resistance and is suitable for valve applications. Additionally, we also offer "KS-60SO," which is made by braiding PTFE fibers treated with special lubricating oil in a lattice pattern, and "KS-60B," a braided packing made with graphite-filled PTFE fibers. 【Performance Values】 ■ Temperature (°C): 260 ■ Valve Pressure (Mpa): 10.3 ■ Pump - Pressure (Mpa): - - Peripheral Speed (m/s): - - PV Allowable Value: - ■ Motion Equipment (Rotational) - Pressure (Mpa): 4.9 - Peripheral Speed (m/s): 1 ■ pH Range: 0-14 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-65" is a standard packing suitable for general pump applications, made by braiding carbon fiber into a rectangular cross-section and treating it with graphite, PTFE, and lubricating oil. Additionally, we offer "KS-65I," which is finished to be firmer to enhance stability against pressure, and "KS-65K," which is braided more robustly through a lattice structure to further improve stability against pressure and peripheral speed. 【Performance Values】 ■ Temperature (°C): 200 ■ Valve Pressure (Mpa): 5.1 ■ Pump ・ Pressure (Mpa): 1 ・ Peripheral Speed (m/s): 20 ・ PV Allowable Value: 9.8 ■ Motion Equipment (Rotational) ・ Pressure (Mpa): 4.9 ・ Peripheral Speed (m/s): 5 ■ pH Range: 2-12 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-51" is a packing suitable for valve applications, made by braiding high-strength carbon fibers into a rectangular cross-section and treating it with PTFE dispersion. It can be used with various fluids such as clean water, seawater, wastewater, muddy water, heated water, boiler feed water, low-pressure steam, mineral oil, animal and vegetable oils, heat transfer oil, crude oil, and heavy oil. Additionally, we also offer "KS-51B," which is suitable for high-temperature conditions treated with graphite and special lubricants, as well as "KS-51L." 【Performance Values】 ■ Temperature (°C): 300 ■ Valve Pressure (Mpa): 25.9 ■ Pump ・ Pressure (Mpa): - ・ Peripheral Speed (m/s): - ・ PV Allowable Value: - ■ Moving Equipment (Reciprocating) ・ Pressure (Mpa): 24.5 ・ Peripheral Speed (m/s): 5 ■ pH Range: 0-14 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-40" is a general-purpose non-asbestos packing made by weaving special inorganic fibers into a rectangular cross-section, then impregnating it with PTFE dispersion and treating it with lubricating oil. It can be used in applications for valves, pumps, and rotating machinery. Additionally, we also offer "KS-40T," which can be used with fluids such as water, steam, seawater, industrial water, mineral oil, animal and vegetable oils, and solvents. 【Performance Values】 ■ Temperature (°C): 180 ■ Valve Pressure (Mpa): 5.1 ■ Pump - Pressure (Mpa): 1 - Peripheral Speed (m/s): 5 - PV Allowable Value: 3.4 ■ Motion Equipment (Rotating) - Pressure (Mpa): 4.9 - Peripheral Speed (m/s): 1 ■ pH Range: 2-11 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-70" is a general-purpose non-asbestos packing made by braiding Lamy fibers into a rectangular cross-section and treating it with grease. It can be used for applications such as valves, pumps, stern tube shafts, and rudder shafts. Additionally, we also offer "KS-75," which can be used with fluids such as fresh water, seawater, and industrial water. 【Performance Values】 ■ Temperature (°C): 80 ■ Valve Pressure (Mpa): 5.1 ■ Pump ・ Pressure (Mpa): 0.5 ・ Peripheral Speed (m/s): 10 ・ PV Allowable Value: 2.5 ■ Motion Equipment (Rotational) ・ Pressure (Mpa): 4.9 ・ Peripheral Speed (m/s): 1 ■ pH Range: 6-8 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

The "KS-30" is a general-purpose non-asbestos packing made by knitting high-quality cotton yarn into a rectangular cross-section and treating it with white grease. It can be used for applications such as valves, pumps, stern tube shafts, and rudder shafts. 【Performance Values】 ■ Temperature (°C): 90 ■ Valve Pressure (Mpa): 5.1 ■ Pump - Pressure (Mpa): 0.5 - Peripheral Speed (m/s): 10 - PV Allowable Value: 3.4 ■ Motion Equipment (Rotational) - Pressure (Mpa): 4.9 - Peripheral Speed (m/s): 1 ■ pH Range: 4-10 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

"Ring molded products" are made by pressing grand packing with a specified mold. This allows for increased efficiency in assembly work and enables the product to fully demonstrate its original performance. Our company consistently manufactures everything from the braiding of grand packing to ring molding in our own factory. We can also produce grand packing with non-standard dimensions and finish to the desired total height of the ring. 【Features】 ■ No need for cutting cords, leading to reduced work time ■ Good transmission of clamping force and low occurrence of stress relaxation ■ Maintenance of good sealing properties (longer lifespan) ■ Numerous molds owned *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Other contract manufacturing

This catalog presents the products of Konan Seiko Co., Ltd., which handles gland packings, gaskets, bellows, and more. It includes a comparison table of gland packings from other companies, a list of performance values for gland packings, and reference materials on pressure, number of rings, and standard tightening surface pressure. Additionally, it showcases a rich lineup of general-purpose non-asbestos packings treated with white grease, such as "KS-30" and "KS-70." [Contents (excerpt)] ■ Product Information (Gland Packing) ■ Product Information (Hatch Cover) ■ Product Information (Gasket) ■ Product Information (Glass, Biodegradable Fibers, Textiles) ■ Specifications (Gland Packing, Bellows), etc. *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Piping and Piping Parts
• Food and pharmaceutical standard seals and packing products

This document explains the Teflon piping "Synergy System." The Synergy System consists of Teflon (PFA) lines (pipes and fittings) that can withstand SIP and CIP cycles. It provides detailed explanations of its adoption track record, quality, planning, product composition, features, and characteristics. [Contents] ■ Track Record: Semiconductor Industry / Chemical Processing Industry ■ What is the Synergy System? ■ Quality Standards / Quality Testing Methods ■ Product Composition / Features and Characteristics *Please note that the catalog is available in PDF format only. Thank you for your understanding.

• Joints and fittings
• Valves and fittings

This is an introduction to the customization examples of the Teflon (PFA) Heloop piping material "Synergy Series." In the genuine Synergy Series, PEEK resin and Teflon are used for the Heloop joint section. Konan Seiko Co., Ltd. can provide an original Synergy Series with enhanced strength by customizing the Heloop joint section to a stainless steel flange. *Konan Seiko can also propose types of joints according to the fluid and pressure. 【Features of the Synergy Series】 ■ Compatible with standard SIP and CIP cycles ■ Lower running costs compared to stainless steel piping materials ■ Difficult for biofilms to adhere ■ Improved productivity due to reduced cleaning time ■ Easy beadless welding construction on-site ■ High strength stainless steel is used for parts of the Heloop joint that do not come into contact with the fluid ■ Custom options are available for flanged types and more, in addition to Heloop joints *For details, please contact us or view the PDF data from the download. *The catalog is available in PDF format only. Thank you for your understanding.

• Other food factory equipment and parts
• Other mixing machines and tanks

This is an introduction to a customization case of the Teflon (PFA) Heliore piping material "Synergy Series." In the standard Synergy Series, PEEK resin and Teflon are used for the Heliore joint section. Konan Seiko Co., Ltd. can provide an original Synergy Series customized with stainless steel for the Heliore joint section, increasing its strength. *Konan Seiko can also suggest types of joints based on fluid and pressure. 【Features of the Synergy Series】 ■ Compatible with standard SIP and CIP cycles ■ Lower running costs compared to stainless steel piping materials ■ Difficult for biofilms to adhere ■ Improved productivity due to reduced cleaning time ■ Easy beadless welding construction on-site ■ High strength stainless steel in areas of the Heliore joint that do not contact the fluid ■ Custom options available, including flange types, in addition to Heliore joints *For details, please contact us or view the PDF data from the download. *The catalog is available in PDF format only. Thank you for your understanding.

• Other food factory equipment and parts
• Other mixing machines and tanks

The Teflon (PFA) sanitary piping material "Synergy Series" is capable of steam sterilization at a pressure of 359 kPa, equivalent to a temperature of 149°C for saturated steam. Unlike stainless steel (SUS316, SUS316L), it does not incur maintenance costs for passivation treatment, and the "rouging" phenomenon does not occur. Additionally, Teflon's excellent non-stick properties make it difficult for fluids to accumulate inside the piping, which is expected to improve maintenance efficiency. 【Features】 ■ Compatible with standard SIP and CIP cycles ■ Lower running costs compared to stainless steel piping materials ■ Biofilm adhesion is less likely ■ Increased productivity due to reduced cleaning time ■ Easy on-site beadless welding construction ■ The part of the sanitary fitting that does not come into contact with the fluid is made of high-strength stainless steel ■ Custom options are available, including flange types, in addition to sanitary fittings *For more details, please contact us or view the PDF data available for download. *The catalog is available in PDF format only. Thank you for your understanding.

• Other food factory equipment and parts
• Other mixing machines and tanks

The "Synergy Joint" is a type of fitting suitable for sanitary piping in food, bio, and pharmaceutical manufacturing lines. It complies with US FDA standards, USP Class VI, 3A standards, and USDA standards. It is compatible with SIP and CIP applications (saturated steam at 149°C, pressure at 359 kPa). It reduces downtime and costs associated with line cleaning and maintenance. 【Features】 - Allows visual inspection of the interior of the piping, which was not possible with SUS piping. - Product and manufacturing traceability through laser marking. - Products from ISO 9001 and ISO 14000 certified factories. For more details, please contact us or download the catalog. *The catalog is available in PDF format only. Thank you for your understanding.

• Piping
• Piping Materials
• Piping and Piping Parts

The "PVDF Tube Adapter" is a product that connects standard clamp fittings to silicone tubes. It reduces the hazardous areas created by barbed fittings, facilitates field replacement of silicone tubes unlike permanently compressed hose assemblies, and minimizes the risk of cross-contamination. The adapter is made from FDA-approved PVDF material. 【Features】 ■ Made from PVDF material ■ Reduces hazardous areas created by barbed fittings ■ Easy field replacement of silicone tubes ■ Minimizes the risk of cross-contamination *For more details, please contact us or view the PDF data from the download. *The catalog is available in PDF format only. Thank you for your understanding.

• Tubes and hoses
• Joints and fittings

The "Synergy Welding Kit" is a groundbreaking technology that enables welding of Teflon PFA on-site. It allows for the easy creation of seamless Teflon PFA without beads, both inside and outside. It achieves high-purity welding without cracks, breaks, or bacterial intrusion. The welding heater is designed to be compact and portable, making it easy to handle. 【Features】 ■ Easy-to-use controller with computer control for repeatable and precise welding ■ Capable of working in tight spaces ■ Automatic collection of welding data for easy verification of welds ■ Compact design for easy portability *For more details, please contact us or view the PDF data available for download. *The catalog is available in PDF format only. Thank you for your understanding.

• Other experimental equipment

The "Synergy Clamp Fitting" is a fitting made from FDA-certified Teflon PFA. The end connection is double-molded with PEEK material, a high-performance polymer designed and certified by the FDA. By using the mechanically strong PEEK material, durability is provided to the joint surface of the clamp, enhancing the fitting performance during SIP operations. It is also compatible with existing stainless steel sanitary clamp connections used in utility lines and process applications. 【Features】 ■ Made from Teflon PFA ■ Provides durability to the joint surface of the clamp ■ Enhances fitting performance during SIP operations ■ Compatible with stainless steel sanitary clamp connections ■ Can be routinely steam sterilized *For details, please contact us or view the PDF data from the download. *The catalog is available in PDF format only. Thank you for your understanding.

• Valves and fittings

The "Synergy Valve" is an ideal product for a wide range of applications, from utilities to the most demanding validation processes. The valve body is injection molded from PEA material, ensuring it will not discolor or develop holes. To guarantee the highest quality valves for our customers, we have formed a team with Alfa Laval Sanders, a leader in sterile valve technology. Various reliable products manufactured by Sanders for the biopharmaceutical industry are also incorporated into the Synergy Valve. 【Features】 ■ Capable of efficiently handling the most demanding processes ■ The body is injection molded from PFA material, ensuring no discoloration ■ Products incorporating various reliable offerings from Sanders for the biopharmaceutical industry *For more details, please contact us or view the PDF data available for download. *The catalog is available in PDF format only. Thank you for your understanding.

• Valves and fittings

The "Synergy System Product Catalog" is a product catalog from Konan Seiko Co., Ltd., which mainly handles synergy fittings and synergy system products. It features a wide range of products tailored to various applications, including the Synergy Valve "1/2” Manual Valve," the Synergy Clamp Fitting "Sweep Elbow," and the Synergy Beadless Welding Fitting "Tee." We offer a variety of non-metallic product lines that can withstand regular SIP and CIP cycles. [Contents] ■ Product Overview ■ How to Order Products ■ Company Policy, etc. *For details, please contact us or view the PDF data available for download. *The catalog is available in PDF format only. Thank you for your understanding.

• Joints and fittings
• Valves and fittings

← "Photos of biofilm cleaning before and after on PFA" The Synergy System product "Teflon PFA sanitary piping material" can be steam sterilized at a pressure of 359 kPa, equivalent to a temperature of 149°C under saturated steam. It is also capable of chemical cleaning under harsh conditions that are impossible with other materials. There are no maintenance costs for passivation treatment, and the leaching phenomenon does not occur. We respond quickly and cost-effectively to partial line changes. 【Features】 ■ Compatible with standard SIP and CIP cycles ■ Lower running costs compared to stainless steel piping materials ■ Biofilm is less likely to adhere ■ Increased productivity due to reduced cleaning time ■ Easy beadless welding construction on-site *For details, please contact us or view the PDF data from the download. *The catalog is available in PDF format only. Thank you for your understanding.

• Other food factory equipment and parts
• Other mixing machines and tanks