中部美化企業 List of Products and Services

We would like to introduce a case study of the "Water Shutter" that our company handles. Before the introduction of the water stop board, there were budget-related challenges such as, "We are considering the introduction of a water stop board for flood prevention, but high-performance water stop boards are also expensive," and "If it’s an individual installation, the budget does not match." The "subsidy for the installation of water stop boards," which is widely implemented in areas prone to flooding, incorporates various systems in each municipality. Customers considering flood prevention may want to check with their local municipality. 【Case Overview】 ■ Product Details: H377 (2-panel) ■ Building: Private residence ■ Installation Location: Garage opening ■ Region: Aichi Prefecture ■ Subsidy Details: Half of the installation cost of the water stop board (up to 300,000 yen) *For more details, please feel free to contact us.

• Other safety and hygiene products

We would like to introduce a case study of our water barrier "Water Shutter." ~Q&A~ Q: I inquired about water barriers from other companies and requested a rough estimate, but there are additional construction costs besides the water barrier installation, and I am unsure of the actual expenses, which is troubling. A: Our company provides full support from on-site surveys to product design and installation, so we can consistently present complex details such as having separate contractors for the installation and separate estimates for wall fabrication. 【Product Installation Overview】 ■ Product Details: H377 (2-panel) ■ Building: Certain factory office ■ Installation Location: Entrance, inside installation ■ Region: Shizuoka Prefecture *For more details, please download the PDF or feel free to contact us.

• Other contract services

We would like to introduce a case study of the "Water Shutter" that our company handles. In a certain commercial facility, there were central medians and height differences, making standard installation difficult. The product was adopted due to our technical ability to propose specific countermeasures for the installation. 【Case Overview】 ■Product Details: Width 3000 mm, Water Stopping Height H1020 mm (6-panel) ■Building: Certain commercial facility ■Installation Location: Concrete gap opening ■Region: Itabashi Ward, Tokyo *For more details, please download the PDF or feel free to contact us.

• Water treatment equipment

We would like to introduce a case where our company’s "Water Shutter" was implemented at a certain factory in Kanagawa Prefecture. At this factory, the maximum flooding height according to the hazard map is 3 meters, and measures were necessary due to the increase in disasters. There are few manufacturers that can handle up to approximately 3 meters, so we were commissioned by our company, a specialized manufacturer with extensive experience. In recent years, the number of areas reaching a maximum flooding height of 3 meters has been increasing. Our product can be installed in various locations, and we provide support from the design stage. Please feel free to contact us if you have any requests. 【Case Overview】 ■ Issue: Measures are necessary due to the maximum flooding height of 3 meters and the increase in disasters. ■ Product Details: H2975 (18-panel) ■ Installation Location: Opening of a concrete retaining wall ■ Reasons for Adoption: - Few manufacturers can handle up to approximately 3 meters. - A specialized manufacturer with extensive experience. *For more details, please refer to the PDF document or feel free to contact us.

• Other water treatment equipment

The "Water Shutter Light" that we handle can be installed inexpensively without floor construction. The water stop panel is common with the "Water Shutter," allowing for high water stop performance even with a simple water stop board! Here are some examples of where this product has been implemented. 【Case Overview】 ■ Adopted Product - Water Shutter Light ■ Issue - Elevators stop due to flooding caused by regular heavy rain ■ Reason for Adoption - It could be installed at a low cost compared to elevator repair costs - Leakage is minimal, preventing the elevators from stopping 【Construction Details】 ■ Product Details: Width 1100 mm, Water Stop Height H342 (2-panel) ■ Building: Condominium ■ Installation Location: In front of the elevator ■ Region: Aichi Prefecture 【Features】 ■ It is primarily installed directly on walls or door frames, and since there is no floor construction, the installation cost is low. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

We would like to introduce a case study of the "Water Shutter" that our company handles. We have received the following opinions regarding the storage location of the product: "Conventional water stop boards from other companies have handles on the front panel, making it impossible to stack them for storage and taking up space. Therefore, we were considering a product that could be stored more compactly. It would be reassuring to have a cover for outdoor storage." "It can be stored using limited spaces or dead spaces, so there's no need to worry about storage locations!" You want to store the water stop board close to where it will be installed, right? The Water Shutter effectively addresses such concerns. *For more details, please feel free to contact us.

• Other water treatment equipment

We would like to introduce a case study of our "Water Shutter" implemented in a condominium in Chiba Prefecture. Before the installation, there were many areas that required flood prevention measures, and there were few manufacturers capable of providing consistent solutions for all areas. Additionally, there was a need for advice on where flooding might occur. We received feedback stating, "Since we were able to handle everything from design to construction in-house, the meetings went smoothly, and we felt reassured because they proposed suitable products for each situation." 【Case Overview】 ■Challenges - There were many areas that required flood prevention measures, and few manufacturers could provide consistent solutions for all areas. - There was a need for advice on where flooding might occur. ■Reasons for Adoption - The ability to handle everything from design to construction in-house led to smooth meetings. - They proposed suitable products for each situation, which provided reassurance. *For more details, please feel free to contact us.

• aluminum

We would like to introduce a case where our "Water Shutter" was implemented at a certain factory in Gifu Prefecture. There were instances where warning poles were installed in front of the factory's shutter, but with conventional products, they had to be removed. During the implementation, we were able to avoid the poles and other obstacles using corner support posts, which eliminated the need for unnecessary construction arrangements. 【Case Overview】 ■ Challenges - Warning poles were sometimes installed in front of the factory's shutter, necessitating their removal with conventional products. ■ Reasons for Adoption - We were able to avoid the poles and other obstacles using corner support posts, so there was no need to arrange for unnecessary construction. *For more details, please feel free to contact us.

• aluminum

Our water barrier product, the "Water Shutter," is designed in-house, allowing for flexible responses. We can provide proposals leveraging our experience as a floodgate manufacturer. Here are some examples of where our product has been implemented. 【Case Overview】 ■ Adopted Product - Water Shutter ■ Challenge - Other companies refused to install it in sloped areas. ■ Reason for Adoption - The installation method of the water barrier is flexible. - Although there may be some height differences, they are minimal enough to ensure that the underside of vehicles does not scrape. *For more details, please feel free to contact us.

• Water treatment equipment

We would like to introduce a case study (feedback) of the "Water Shutter" that our company handles. There have been concerns that the currently used flood barriers are misaligned due to different installation positions by various individuals, and issues such as excessive leakage from the installed barriers, which were not properly secured. "After introducing the Water Shutter, we can insert the panels along the frame, so there is no misalignment or increased leakage due to different individuals. Anyone can install it with the same method, providing peace of mind." [Case Overview] ■Challenges - The currently used flood barriers can be easily installed with magnets or by turning a handle, but there are concerns about misalignment due to different installation positions by various individuals. - When it seemed that there was excessive leakage from the installed barriers, it turned out that the panels were misaligned and not securely fixed. ■Reasons for Adoption - Simple operation of inserting panels along the frame. - No misalignment or increased leakage due to different individuals. *For more details, please feel free to contact us.

• Other water treatment equipment

◎ It can be applied to wet surfaces and underwater. There is no need to dry it. ◎ It is made of a resin-based sheet that is excellent in weather resistance. ※ Accelerated weather resistance test using a weather meter: approximately equivalent to 30 years with no cracks. ◎ The dedicated adhesive has good flexibility and adheres well to structures. Additionally, no primer or other surface treatment is required, which reduces the time and effort needed for repairs. ◎ The fibrous material on the back of the sheet interlocks with the adhesive, making the sheet's adhesion strong. (There have been no cases of peeling on-site after the sheet was manufactured.) ◎ A dedicated weep hole (check valve) can be installed on the sheet. ※ In areas where there is water seepage from joints, applying the sheet may cause the seepage to lose its escape route, potentially leading to uplift of the structure, expansion of cracks, or peeling of the sheet. By installing a weep hole, an escape route for the seepage can be created, preventing water from escaping from the structure. The Tokai Agricultural Administration Bureau has registered this new method. (Please check the link below for confirmation.) It complies with quality standards as a material used for joint covering methods as per the Ministry of Agriculture, Forestry and Fisheries. For more details, please contact us or download the catalog.

• others

This is a simple water gate made using FFU (glass long fiber reinforced plastic) for the gate body. 【Features】 ● Lightweight Gate Body ● It is lighter compared to conventional steel materials. The lifting operation is light and easy to handle. ● Corrosion Resistance ● Since it is made of plastic, there is no concern about corrosion. *Design and manufacturing can be customized to match civil engineering structural drawings.

• others

The "V-type" surface drainage outlet is used to smoothly handle drainage from concrete elevated structures, bridges, sidewalks, and other surfaces during rainfall. It is easy to install and economical. Additionally, it has excellent load-bearing capacity and is corrosion-resistant. It helps prevent debris accumulation and ensures pedestrian safety (preventing tripping hazards for children and those in high heels). It can be manufactured to adapt to the thickness of the floor slab. 【Features】 ○ Length adjustable according to the thickness of the floor slab ○ High load-bearing capacity For more details, please contact us or download the catalog.

• others

"Useries" offers a variety of screens for waste removal tailored to different applications and site conditions. Starting with the "UA type," a dewatering screen that easily collects waste due to its clean slope, there are also the "UB type," which removes waste through the rotation of the main body, the "UC type," which is fixed to the wall of a drainage ditch with anchors, and the "UD type," which can be easily inserted into existing PVC or flue pipes. All types are simple screens that are easy to install. 【Features】 ○ High dust collection efficiency ○ Easy waste removal For more details, please contact us or download the catalog.

• others

The stainless steel shatterproof plate "TAS·TBS type" is a compact drop prevention product that replaces inner and outer auxiliary pipes used in sewage and rainwater drainage pipe construction. It is available with an inspection hole. It is an anchor-fixed type, making installation easy. 【Features】 ○ Easy inspection of inflow pipes ○ Simple installation ○ High durability For more details, please contact us or download the catalog.

• others

The "TA type" anti-splash board is a compact drop prevention product that replaces the inner and outer auxiliary pipes used in sewer construction. It is lightweight for easy anchoring and installation. Its design minimally obstructs the internal cross-section, making post-installation management easy. Made of synthetic resin (H-PVC), it is easy to cut on-site and exhibits excellent corrosion resistance. 【Features】 - Easy inspection of inflow pipes - Lightweight and easy to install - Easy dimension adjustment - High corrosion resistance For more details, please contact us or download the catalog.

• others

The PVC water stop wall "Type S1" is a measure to prevent slope collapse. When draining water from a rice paddy using PVC or poly pipes from a drainage box (corner drain), water may run around the pipe at the crossing point of the ditch, potentially causing the slope to collapse. To prevent this, a water stop wall is installed in the middle section of the PVC (or poly) pipe to prevent slope collapse. This method allows for the installation of the PVC water stop wall without cutting the pipe, whether it is a new or existing pipe. 【Features】 ○ Two types available for new and existing pipes ○ Can be installed without cutting the pipe ○ Excellent corrosion resistance made of synthetic resin For more details, please contact us or download the catalog.

• others

The Slab Drain "R type" can be used as a roof drain for rooftops and to prevent the inflow of floating debris and clogging at drainage outlets. Made of synthetic resin, it has excellent corrosion resistance, and its arch-shaped top provides a structure that is strong against external pressure. Additionally, its design makes it difficult for leaves and plastic to adhere. It can be easily installed by simply inserting it, and it can be attached to various types of pipes such as PVC, poly, and steel pipes. 【Features】 ○ High pressure resistance ○ Compatible with various pipe types ○ Easy installation ○ High corrosion resistance For more details, please contact us or download the catalog.

• others

The "QI type" insert filter (for PVC pipes) is an aftermarket filter material that can be installed on existing PVC drainage pipes. It excels in drainage effectiveness and prevents the outflow of soil and sand from concrete retaining wall drainage pipes during heavy rainfall. 【Features】 - Easy installation by simply applying adhesive to the main body and inserting it into the pipe's inner diameter. - Uses synthetic fiber non-woven fabric for the filter section to prevent suction. - Excellent pressure resistance. For more details, please contact us or download the catalog.

• others

The wave filter "Q7A type" smoothly drains groundwater and is an easy-to-install planar drainage material that stabilizes structures such as concrete retaining walls and waterways. The core material has a rugged shape resembling crushed stone, providing a large collection area and demonstrating high backside drainage performance. It has a large collection area and drains quickly. *It has drainage performance comparable to conventional crushed stone collection layers. 【Features】 ○ High backside drainage performance ○ Easy installation ○ High compressive strength ○ Compatible with slopes For more details, please contact us or download the catalog.

• others

The "Qseries" is a filter for drainage pipes used in concrete retaining walls, block walls, and stone masonry. It prevents clogging and effectively maintains drainage performance. 【Features】 ○ Made of synthetic resin and synthetic fibers ○ Can be retrofitted ○ Simply insert without adhesive ○ High pressure resistance ○ Excellent shape against soil pressure For more details, please contact us or download the catalog.

• others

The pit valve (with filter) "PA type" allows infiltrated water from pits (such as handholes for information boxes or joint trenches) buried underground to permeate into the ground, preventing the intrusion of groundwater and soil. The length of the main body can be adjusted to match the thickness of the pit wall. The socket part of the main body has ribs, which enhances its compatibility with concrete and its watertightness. 【Features】 - Prevents backflow into the pit even when the groundwater level is high - Prevents the intrusion of soil and other materials by using a filter - Can be capped with the included watertight cap (only for PA-75) - Can be retrofitted and is compatible with both new and existing installations For more details, please contact us or download the catalog.

• others

The "O-type" hole cover camouflages the drainage pipe holes in retaining walls, allowing the drainage function to be utilized without compromising the landscape. Even if sediment accumulates inside the pipe, it is less likely to grow grass, and since it is made of synthetic resin, it will not rust and can be used semi-permanently. Additionally, it can be installed even after construction. It can be easily attached with adhesive. 【Features】 ○ Prevents pranks by keeping stones, empty cans, and bottles out ○ Can be retrofitted and attached with adhesive ○ Excellent corrosion resistance due to synthetic resin ○ Opening area: more than 1/3 of the pipe's cross-sectional area For more details, please contact us or download the catalog.

• others

The "N type" is used for water intake from agricultural ponds, reservoirs, and retention basins. Its simple structure allows for easy opening and closing without malfunction. Made of bronze, it can be used semi-permanently. Anchor installation is also possible (except for N-250). 【Features】 ○ High corrosion resistance ○ Easy installation For more details, please contact us or download the catalog.

• others

The "K3 type" water valve is used for draining or retaining surface water and groundwater within cultivated areas during rainfall, due to the large-scale consolidation of agricultural land. The water valve was developed with consideration for use in shallow drainage ditches that are easily accessible. The outlet area of the main body can be adjusted continuously using a band-shaped outer cylinder. 【Features】 ○ Lightweight, corrosion-resistant, and watertight structure ○ Continuously adjustable ○ Easy connection to the collection pipe due to the socket structure For more details, please contact us or download the catalog.

• others

In the construction of underground drainage, various types of water shields have been developed based on the site conditions and purposes in different regions. The "K1 type" water shield pipe features a lightweight, corrosion-resistant, and watertight structure. It is used when the height difference between the drainage channel and the field surface is relatively small, and the drainage outlet is deep. 【Features】 ○ Smooth water flow ○ Safe for grass cutting ○ Free setting of underground water level For more details, please contact us or download the catalog.

• others

The Dowell Bar Cap "JD type" is used as a sleeve for rebar at the expansion and contraction joint of concrete structures in the transverse direction. It is processed to the specified dimensions. 【Features】 ○ Adjustable length ○ Made of PVC ○ Comes with TS cap For more details, please contact us or download the catalog.

• others

The tunnel weep hole "GT type" (without valve) is integrated with a drainage pipe filter with an inner diameter of 26mm and an outer diameter of 32mm, using PVC pipe VP-25 (L = lining length). This product is inserted through a wall hole that has been pre-bored to approximately 50mm, sealed for water tightness with an O-ring, and the surface is finished with a sealing agent. 【Features】 ○ Option to choose with or without valve ○ Adjustable length For more details, please contact us or download the catalog.

• others

The "GS type" weep hole for steel sheet piles is a dedicated backflow prevention valve designed to prevent disasters caused by the phenomenon of moisture accumulation in the backfill area. The steel sheet pile method used for waterway revetments and similar structures in soft ground areas has seen increased utilization in recent years. However, the weep holes or drain pipes used in this method are still not commonly employed, and the reduction of back pressure is not being addressed. By treating the water in the backfill area, back pressure can be alleviated, leading to greater stability of the ground. 【Features】 - Easily installable from the front of the steel sheet pile - Reduction of back pressure through water treatment in the backfill area For more details, please contact us or download the catalog.

• others

The "GP1 type" weep hole for sheets is a check valve that is installed on waterproof sheets. It is composed of a stainless steel cover, a retaining ring, a rubber valve, and a screw-type body (made of synthetic resin), making it robust and free from failures due to its simple structure. Its compact and lightweight design allows for easy direct installation on the sheet. By using it in conjunction with drain pipes or air vent pipes, additional safety can be achieved. Furthermore, the weep hole for sheets ensures the safety of the embankment while significantly reducing construction labor and costs. 【Features】 - Simple structure with no failures - Can be installed on waterproof sheets up to 4mm thick - Slim design, with minimal visibility of irregularities after installation on pond waterproof sheets - Can be easily installed on waterproof sheets without the use of special tools - Made of synthetic resin and stainless steel, allowing for semi-permanent use For more details, please contact us or download the catalog.

• others

【Lightweight Design】 ◎ Utilizes lightweight and durable FRP to reduce the weight of the door! ◎ Eliminates door stops for further weight reduction! * Custom options with door stops are also available. 【Performance Improvement】 ◎ Adopts our unique double hinge for smooth opening and closing operation! ◎ Equipped with water-stopping rubber for effective sealing! 【Easy Installation】 ◎ Increased workability due to lightweight design! ◎ Installation is complete with 2 to 3 included drive anchors!

• others

The flap gate (band type) "F9 model" prevents external water from backflowing during floods or when full. It pursues a simple structure, achieving lightweight and significant economic efficiency improvements. The arm is supported at two points, allowing for smooth opening and closing, enhancing water tightness. It has few protrusions, minimizing debris adhesion. Installation involves wrapping and securing it with a band around existing pipes (some pipe types may not be compatible). 【Features】 ○ Direct installation on pipes possible (VU/VP/HP/SUS pipes/SGP pipes, etc.) ○ High corrosion resistance ○ Aluminum version has anti-corrosion coating For more details, please contact us or download the catalog.

• others

The "F8 type" flap gate (round and square) for harbors prevents external water from backflowing during storm surges. It features a double hinge design that ensures high water tightness and smooth opening and closing. The door and stops are made of SUS323L (equivalent to SUS316L), which is particularly resistant to seawater. The allowable wave height is equivalent to 6.0m (equivalent to a water depth of 30m). It comes with all-anchor theft prevention nuts (in two locations). 【Features】 ○ Double hinge design ○ Resistant to seawater ○ Easy installation For more details, please contact us or download the catalog.

• others

【Low Cost】 ◎ Achieves low cost with a simple structure! 【Rich Variations】 ◎ Available in three types: stainless steel, aluminum, and iron! ◎ You can choose between round and square shapes! ◎ Designs without door stops are also possible! ◎ Custom sizes can be designed to fit the site! (Up to width x height 1000mm) 【High Performance】 ◎ Double hinge design allows for smooth opening and closing! ◎ Uses water-stopping rubber to ensure high water tightness! 【Easy Installation】 ◎ Simple installation with the included drive anchors!

• others

【High Workability】 ◎ The door stop and door body can be disassembled, reducing the burden of welding work! ◎ The installation of the door body can be done with standard tools! * A post-installation specification with embedded anchor fixation can also be designed. 【High Water Stop and Opening/Closing Performance】 ◎ Adopting our unique double hinge mechanism for smooth opening and closing! ◎ Improved water stop performance with water stop rubber and smooth movement! 【Conventional Design Tailored to the Site】 ◎ Broadly compatible with various sizes and design water depths! * Please feel free to consult us regarding design conditions.

• others

The "drainage tube" is a drainage regulator used to remove water from the paddy fields to the drainage channel. The water level in the paddy field can be adjusted by operating the inner cylinder up and down. After drainage or during the winter period (off-season), water can be removed through the winter drainage holes of the outer cylinder, allowing for dry field conditions. Additionally, when combined with the optional orifice cap, it exhibits a paddy dam effect. 【Features】 ○ Adjustable water level ○ ER type: Two height options available depending on the position of the drainage pipe For more details, please contact us or download the catalog.

• others

The "outlet plug" is a simple plug used for water intake and drainage. It is designed for reverse water pressure. We offer a lineup of products including the "rotary valve (D1 type)" and "reverse gate (D3 type)" for use when converting irrigation channels into roads or when it is necessary to install a water flow control device at the outlet due to surrounding conditions, as well as the "insertion gate (D2 type)" for use when drawing water from the irrigation channel and placing it in the middle of the water conveyance pipe. 【Features】 ○ Capable of stopping water flow from the pipe ○ Easy to operate, lightweight, and watertight structure ○ Allows for proper management of water intake adjustment For more details, please contact us or download the catalog.

• others

The "CY type" grating with a rotating cover allows for easy and safe gate operation without the need to open and close heavy gratings by installing a spindle that does not discharge with an internal screw-type gate. Since it uses high-tensile steel, the thickness of the grating itself can be reduced, resulting in weight reduction and cost savings. 【Features】 - Easy gate operation - Locking function on the cover for vehicle passage - High-tensile steel - Uses "high-tensile steel" with excellent strength For more details, please contact us or download the catalog.

• others

The internal screw-type simple gate "CT type" is a simple sluice gate with an internal screw structure. The frame is made of stainless steel, and the door body is made of glass fiber reinforced plastic, making it lightweight and highly corrosion-resistant. The handle is detachable, preventing unnecessary operations. Due to the internal screw design, the spindle does not protrude when opened. It is designed to handle only positive water pressure. 【Features】 ○ Internal screw type ○ Lightweight operation ○ Allows for appropriate water intake adjustment management ○ Can be manufactured for three-way and four-way water tightness ○ Customizable For more details, please contact us or download the catalog.

• others

The Armco-type gate "CA type" is a round-shaped simple sluice gate. The door body and the stop are made of cast iron (FC) or stainless steel casting (SCS13). It is easy to install as it is secured with all anchors. We offer two types of frame materials: steel (SS400, painted in light blue) and stainless steel (SUS304). It only supports positive water pressure. *If you are considering reverse water pressure, please consult us. 【Features】 ○ Allows for proper management of water intake volume adjustment ○ Easy installation with all anchors ○ Custom design and manufacturing to match civil engineering structures ○ Compatible with internal screw type, rack type, and bevel type For more details, please contact us or download the catalog.

• others

The "CW type" check gate is a simple and easy-to-use lightweight sluice gate that excels in corrosion resistance. Made of synthetic resin, the operation of the door has low friction resistance, making it lightweight and easy to maintain. The door body is in a two-stage design, allowing for water level adjustment. By using a round handle stopper, the lifting amount of the door body can be freely adjusted. 【Features】 ○ Adjustable to the desired water level with two door bodies up and down ○ The handle can be lifted and fixed at any position with the round handle For more details, please contact us or download the catalog.

• others

The Wedge Gate "CR1-A type" is a stainless steel simple hand-operated water gate. It features a one-touch operation where you simply pull the handle straight up and tilt it sideways. The door can be fixed at any desired position, allowing for proper management of water intake adjustments. The main body is made of stainless steel, providing excellent durability. 【Features】 ○ Made of stainless steel for high durability ○ Easy installation with all anchors ○ Door can be fixed at any desired position ○ There is also a detachable handle version available (CR1-C type) ○ A version that can withstand reverse water pressure is also available (CR1G type) For more details, please contact us or download the catalog.

• others

The Simple Gate "CMK-CMB type" is lightweight, highly corrosion-resistant, and easy to maintain. The water-stopping part is made of synthetic resin, ensuring high and stable water tightness. Additionally, synthetic resin is used for both the door body and sliding surfaces, resulting in low friction resistance and allowing for easy opening and closing operations. 【Features】 ○ Lightweight and durable ○ Allows for proper adjustment and management of water intake ○ Two types of operation methods available: handle type and chain type ○ The position of the mounting anchor plate can be freely adjusted up and down For more details, please contact us or download the catalog.

• others

The "CH type" is a simple and easy-to-use lightweight sluice gate. The frame is made of stainless steel, and the door body is constructed from glass fiber reinforced plastic, making it lightweight and highly resistant to corrosion. By using a round handle type stopper, the lifting amount of the door body can be freely adjusted. The watertight structure is of the three-way watertight type. It is finished with colors and materials that consider the landscape. 【Features】 ○ Lightweight and corrosion-resistant structure ○ Water intake adjustment ○ Landscape-oriented design For more details, please contact us or download the catalog.

• others

The "GF type" is a screen-equipped weep hole used to reduce uplift pressure in rivers, retention basins, and waterways. It can also be used in the bottom section where mud tends to accumulate, making it ideal for waterways and retention basins. The three-layer separation filter structure minimizes the impact of sediment and debris. It can be selectively used depending on the site conditions. 【Features】 ○ Easy cleaning of waterways ○ Ideal for waterways and retention basins ○ Three-layer separation filter For more details, please contact us or download the catalog.

• others