ニューストロング List of Products and Services

When used under heavy materials, you can freely move or easily change the orientation of any heavy object.

• Other cutting tools

It will be a lathe, with a pattern and anti-slip processing. It has excellent wear resistance and toughness.

• Other cutting tools

It will be a lathe, flat surface, and anti-slip processing. It has excellent wear resistance and toughness.

• Other cutting tools

The height of the tool's core is the same as the height of the holder shank, making it easy to adjust for centering. The tool pin is secured with a screw, allowing for easy replacement of the tool. This is a holder for rolling-type knurling flat processing. It also serves as an anti-slip treatment.

• Other cutting tools

The head section can be removed, allowing for changes to be made freely from left to right. The automatic centering bearing base improves work efficiency significantly. The pins for the workpieces are secured with screws, making it easy to replace the workpieces. This is a holder for rolling knurling processing.

• Other cutting tools

This is a T-wrench with a grip handle. With the handle attached, tightening work can be done very easily. The R type can be used at an angle, making fastening work much easier.

• Other cutting tools

It is used for boring processing. It is a finishing tool.

• Other cutting tools

It is used for boring processing. It is a finishing tool.

• Other cutting tools

It is ideal for cut-off machining. It is a tool for a stick bite holder.

• Other cutting tools

It is ideal for cut-off machining. It is a tool for cut-off holders.

• Other cutting tools

You can use it by processing the blade with the completed attachment.

• Other cutting tools

With the included bit, the blade can be processed and used. The main body has bit insertion holes processed at angles of 90 degrees and 45 degrees on both ends, allowing for a wide range of tasks. It is used for boring processing. It comes with a bit.

• Other cutting tools

It is ideal for cutting off round objects. Thread cutting processing is possible. The tool holder uses a clamping method for tightening screws. It has a simple design and can also be used with NC lathes. It comes with a tool holder.

• Other cutting tools

This holder is made from a special steel that has been forged and shaped, with specific processing applied, and it has undergone complete heat treatment. It is manufactured in a Hail type, which softens the shock given to the cutting tool, resulting in a comfortable work experience without unpleasant vibrations during cutting operations. The cutting tool is sold separately.

• Other cutting tools

It is ideal for cutting off round objects. Thread cutting is possible. It comes with a bite.

• Other cutting tools

Ideal for cutting off round objects. We offer a variety of sizes from small tabletop lathes to standard general-purpose lathes. You can achieve complete setting of the cutting tool (insert) simultaneously when attaching to the machine. It can process the cutting surface. Inserts are sold separately.

• Other cutting tools

It can be machined from three sides. It is suitable for outer diameter machining, cutting surface machining, and more. It is suitable for a wide range of operations from automatic lathes to CNC lathes. The cutting tools are sold separately.

• Other cutting tools

Colette can be used. It is ideal for pre-processing before medium finishing and reaming as a correction for holes after drilling.

• Other cutting tools

When the splitting angle of the blade grooves is the same, the same force acts on each blade, causing them to vibrate in the same way and making it easier for them to resonate with each other, which leads to the occurrence of chatter. By using uneven division of the blade grooves, the forces acting on each blade change, which has the effect of suppressing resonance and reducing chatter, thereby improving machining accuracy and stabilizing roundness. By brazing carbide tips to SCM (a material with toughness), the runout of the spindle is alleviated. Improvement of holder gripping accuracy: Due to the end mill shank (hardened), collets can be used, resulting in better gripping accuracy compared to drill chucks. Additionally, it eliminates the need to specially manufacture collets. Improvement of blade diameter accuracy: By adopting a k5 tolerance for blade diameter dimensions, it easily falls within the H7 tolerance range. The neck length is designed to be longer, allowing for deep hole machining.

• Other cutting tools

Table: It is 360°. Since it has T-slots, it can accommodate various workpieces for clamping. When machining at an angle, it can be set up more quickly and reliably than adjusting with angle plates. It can be used in conjunction with a vise. When setting up for angle machining, such as for jigs and molds, it can be set up immediately. When machining at an angle, it can be set up more quickly and reliably than adjusting with angle plates. The base rotates 360 degrees.

• Other cutting tools

Inclination angle: 45°. Since it has T-slots, it can accommodate various workpiece clamping. It allows for faster and more reliable processing than adjusting with angle plates during angle machining. It can be used in conjunction with a vice. When setting up for angle machining, such as with jigs and molds, it can be set up immediately. It allows for faster and more reliable processing than adjusting with angle plates during angle machining.

• Other cutting tools

It is ideal for simple angle processing. It can be processed more quickly and reliably than adjusting with angle plates during angle processing. It can be used in conjunction with a vise. It can be processed more quickly and reliably than adjusting with angle plates during angle processing.

• Other cutting tools

This is a 2D vice with a jaw opening of 170 mm or 310 mm. The base can rotate 360 degrees and tilt vertically from 0 to 50 degrees.

• Other cutting tools

It can be used with a 5-axis machining machine. It can be used for small workpieces.

• Other cutting tools

This is a 3D vice that can rotate 360 degrees, tilt left and right from 0 to 45 degrees, and tilt vertically from 0 to 90 degrees. The tilt in the length direction is 90°. The table can rotate 360°. The left and right tilt is 45°. It is ideal for complex angle machining.

• Other cutting tools

It is used for precision angle processing. Length direction: 0 to 45 degrees. Base swing: 360 degrees. Length direction: 0 to 45 degrees. Base swing: 360 degrees. It will be a precision vice.

• Other cutting tools

When clamping the workpiece with a vice, it tends to achieve good precision. It comes in pairs. It has a polished finish on the key parts.

• Other cutting tools

The presence of an oil reservoir around the entire body makes it suitable for operations using cutting oil.

• Other cutting tools

Ultra Precision: Parallelism 5μ, Squareness 5μ Ultra Rigidity: SKS material hardened and sub-zero treated. Hardness: HRC 60° Ultra Clamping Force: Clamping force of 1.5t, three times that of a standard vise, achieved through a hydraulic mechanism. Ultra Functionality: Fixing of flat, vertical, and left/right side surfaces is possible with the included clamps.

• Other cutting tools

You can easily change the angle just by operating the lever.

• Other cutting tools

It is used in conjunction with the vertical rotary table (CC・CS-6) to perform keyway machining on round objects. It is used for processing long items with a dividing machine. It moves left and right by turning the handle.

• Other cutting tools

This is a dividing plate used for inclined and circular tables. Plate set contents: DP-1: 3 pieces DP-2: 2 pieces DP-3: 2 pieces

• Other cutting tools

It can be used both vertically and horizontally, making it ideal for indexing processing.

• Other cutting tools

It will be combined with the vertical rotary table (CC・CS-6) to perform keyway machining on round objects. The center movement distance is 115 to 138 mm. It is used for processing long materials with a dividing machine. It moves left and right by turning the handle.

• Other cutting tools

It comes with a 6 or 8-inch chuck. It rotates 360 degrees. It includes a masking plate for easy layout. You can process at any angle with the handle. It can be used both vertically and horizontally. It is a manual type and can be used as a general-purpose machine.

• Other cutting tools

It comes with a 6 or 8-inch chuck. It rotates 360 degrees. It includes a masking plate for easy layout. It can be used both vertically and horizontally. It is a manual type and can be used as a general-purpose machine.

• Other cutting tools

It is ideal for processing key grooves in round objects when combined with the inclined circular table (HUT-300). The center movement distance is 113 to 230 mm. This is a dividing plate for the HUT-300.

• Other cutting tools

This is a dividing plate used for inclined and circular tables. It comes in a set of three plates.

• Other cutting tools

Inclination angle: 90°. Table: 360°. It has T-slots, so it can accommodate various workpiece clamps. With T-slots, it can be used for various machining and can also accommodate inclination angles up to 90 degrees.

• Other cutting tools

Since it is a raw nail, nail shaping is necessary. Please use it when gripping irregularly shaped objects.

• Other cutting tools

It can securely clamp workpieces with high precision. Multiple rigid chucks can be arranged and set on the machine table. The workpiece clamping and loosening operations can be done very easily. Since the main body is very thin, the allowable range for machining is large, which improves work efficiency. Setting it on the table is very simple and quick, just by clamping. By using step keys set in the two key grooves on the bottom surface, uniform machining can be achieved with multiple chucks. Since it has four jaws, it can also clamp square workpieces.

• Other cutting tools

It is convenient even when the workpiece is large and cannot be machined. It can be used outdoors as it is manual and does not require a power source. Please use it for tapping on vertical surfaces, walls, and ceilings, securely fixed with magnets. Compatible taps: M3 to M12.

• Other cutting tools

The tip of the telescopic bar has a mirror, and the axis bends. It checks the backside of the workpiece. It checks the backside of the machine. It is ideal for checking the backside of the machine and gaps.

• Other cutting tools

The head is 7.5mm in diameter, making it small. It bends at the tip, making it ideal for hard-to-reach places. It's convenient for picking up screws and small items that have fallen into narrow spaces. It is easy to extend and retract, making it convenient to carry.

• Other cutting tools

It is convenient for picking up screws and small items that have fallen into narrow spaces. It is easy to extend and convenient to carry.

• Other cutting tools