ダイトロン List of Products and Services

Unlike traditional image processing based on binarization, an AI model trained on over 800,000 particles accurately detects the boundaries of the particles. Since the AI model is already equipped, users do not need to create training data or conduct training. It is software that can be immediately deployed in the field in an offline environment.

• Image analysis software

It is a set of compact and cost-effective sensors and software for centralized management. - Enables continuous monitoring of particle generation and sudden monitoring for factory maintenance. - Simplifies cumbersome initial setup and directly reflects your factory's floor plan to the observation points. - Reduces unnecessary power consumption by maintaining the FFU at an appropriate rotation speed. - Data storage is available in an on-premises version with minimal cost burden after implementation.

• Particle Counter

The RAD-Comet series is a general-purpose device for the development and testing of 10BASE-T1S communication in automotive systems. It can not only simulate nodes on a 10BASE-T1S network but can also be programmed to capture and analyze 10BASE-T1S traffic simultaneously with other vehicle networks. All Ethernet, CAN, and LIN traffic is accurately timestamped for logging and analysis in Vehicle Spy software.

• Other Auto Parts

"DFaVi" is a system that measures and visualizes environmental information such as temperature, humidity, and particle distribution at multiple points in the manufacturing site, contributing to efficient management of the production environment while reducing the burden on the site. Despite its compact size and high quality, it is offered at an affordable price range and supports stable wireless communication via Wi-Fi HaLow. It also enables map display, time-series data management, and automatic control in conjunction with equipment. By collaborating with FFU control systems and eco-monitors, it enables energy-saving operations and remote monitoring, supporting energy conservation and carbon neutrality measures. *Please note that compatibility may vary depending on the FFU you are using. 【Features】 ■ Continuous monitoring of particle generation and detection of sudden occurrences for in-factory maintenance. ■ Simplification of cumbersome initial settings, reflecting your factory layout directly onto the observation points. ■ Reducing unnecessary power consumption by maintaining the FFU at an appropriate rotation speed. ★ We exhibited at the 27th Interphex Week Tokyo, specifically at the "Pharma DX EXPO Tokyo," and held a session by our engineers at the venue. For more details, please check the basic information section below. *For more information about this system, please refer to the PDF materials.

• Particle Counter

[CE, UL, RoHS3 compliant products] Ideal for various industrial applications such as semiconductor manufacturing equipment, image processing inspection equipment, medical inspection devices, and control PCs. Additionally, the global brand Eaton UPS complies with CE*, UL, and RoHS3. *Compliant with the European New Battery Regulation (EU) 2023/1542.

• UPS/Uninterruptible Power Supply

【Features】 - Can be used as current introduction terminals for vacuum containers and pressure vessels. - The shell is made of stainless steel, eliminating concerns about corrosion. - Glass-sealed, providing excellent airtightness (below 1×10^-10 Pa·m3/sec). - Excellent heat resistance and vibration resistance, suitable for use in harsh environments. - Waterproof and drip-proof structure (when fitted), making it suitable for outdoor use.

• Other Connectors

【Features】 - Can be used as a current introduction terminal for vacuum containers and the like. - The shell is made of stainless steel, and there are no soldering points at the sealing part, eliminating concerns about corrosion and providing excellent environmental resistance. - Due to the glass sealing, it has excellent airtightness (*1). 【Structure and Surface Treatment】 - The seal at the connector mounting part is done with a gasket (sheet type). - The shell has a nickel-plated finish.

• Other Connectors

【Features】 - Can be used as a current introduction terminal for vacuum containers, pressure vessels, etc. - The shell is made of stainless steel, so there is no concern about corrosion. - Since it is glass-sealed, it has excellent airtightness (below 1×10^-10 Pa·m³/sec). It also has excellent heat resistance and vibration resistance, making it suitable for use in harsh environments. 【Structure and Surface Treatment】 - The flange part of the shell has an O-ring groove processed. - The shell has a nickel-plated finish.

• Other Connectors

【Features】 - Can be used as current introduction terminals for vacuum containers, pressure vessels, etc. - The shell is made of stainless steel, eliminating concerns about corrosion. - Sealed with glass, it offers excellent airtightness (below 1×10^-10Pa·m3/sec). It also has superior heat resistance and vibration resistance, making it suitable for use in harsh environments. - Waterproof and drip-proof structure (when fitted), allowing for outdoor use. 【Structure and Surface Treatment】 - The flange part of the shell is machined with an O-ring groove. - The shell has a nickel-plated finish.

• Other Connectors

【Features】 - Can be used as a current introduction terminal for vacuum containers, pressure vessels, etc. - The shell is made of stainless steel, and there are no brazed areas at the sealing part, eliminating concerns about corrosion and providing excellent environmental resistance. - Sealed with glass, it offers superior airtightness (below 1×10^-10 Pa·m³/sec) and maintains high reliability. 【Structure and Surface Treatment】 - The flange part of the shell is machined with an O-ring groove. - The shell has a nickel-plated finish.

• Other Connectors

The "Kirari NINJA-DS" is an automatic imaging device for ship engines, consisting of a 360° panoramic camera and LED lighting. Typically, inspecting and photographing the inside of a cylinder requires considerable time and manpower for preparation and execution. However, by using this product, inspection work can be carried out without the need for workers to enter the cylinder. This product contributes to the efficiency of maintenance work. 【Features】 ■ Inserted through the scavenging port for use ■ Easy to operate, requiring no special knowledge ■ Compact and lightweight, capable of imaging cylinders with diameters from 350mm to 980mm ■ High-resolution images allow for detailed examination of captured footage ■ Battery-operated, allowing for repeated use with just charging (camera and LED lighting) *For more details, please refer to the related links or feel free to contact us.

• Other inspection equipment and devices

Daitron utilizes analog and digital technology resources to customize UPS (Uninterruptible Power Supply) systems that match our customers' needs. We have numerous implementation records in semiconductor manufacturing equipment, medical diagnostic devices, and various inspection and measurement devices, and we possess unique know-how. The output variations are approximately 3kW for AC and approximately 3kW for DC. Additionally, we support both lead-acid batteries and lithium-ion batteries. 【Features】 - Optimal proposals for chassis design and battery placement - Output variations: - AC: approximately 3kW - DC: approximately 3kW - A wide selection of batteries - Communication with external devices mainly via RS232C, I2C, CAN, etc. *For more details, please refer to the related links or feel free to contact us.

• Contract manufacturing

We would like to introduce our "Wafer Jet Scrubber," which performs high-speed cleaning using only pure water. We offer a lineup including the "WJS-150B," as well as the "WJS-200B" and "WJS-300B." Additionally, it can accommodate various processes such as single wafers, wafer rings (half-cut, full-cut, expand), and more. 【Features】 ■ High-speed cleaning using only pure water ■ Compatible with various processes ■ With the addition of a dedicated nozzle, surfactants (neutral/weak alkaline) can be applied during brush cleaning ■ An optional brush pressing pressure mechanism can be installed *For more details, please refer to the related links or feel free to contact us.

• Other cleaning machines

The "Wafer Mounter" is a product that supports the wafer thinning and thin substrate process flow. It bonds wafers used in thinning processes for LD, LED, MMIC, etc., to support substrates and stores them in cassettes. It also accommodates support for thin wafers after annealing using support substrates. Additionally, process proposals are possible through alliances with WAX manufacturers. 【Features】 ■ Bonds wafers used in thinning processes to support substrates and stores them in cassettes ■ Accommodates support for thin wafers after annealing using support substrates ■ Process proposals are possible through alliances with WAX manufacturers ■ Capable of handling large patterns with significant irregularities due to coating technology know-how *For more details, please refer to the related links or feel free to contact us.

• Other mounting machines

We would like to introduce our "Manual Wafer Mounter." This device attaches wafers coated with WAX to a support substrate within a vacuum cup. By performing the attachment of the wafer and support substrate inside the vacuum cup, it avoids the inclusion of air bubbles. After attachment, the "Air Stamp" process is performed to correct TTV. 【Features】 ■ Attaches wafers coated with WAX to a support substrate within a vacuum cup ■ Avoids the inclusion of air bubbles by performing the attachment inside the vacuum cup ■ Corrects TTV by performing the "Air Stamp" process after attachment ■ Supports the thinning process of various device wafers from prototyping to mass production *For more details, please refer to the related links or feel free to contact us.

• Other mounting machines

The "High-Function Automatic Appearance (6-Surface) Inspection Device" allows for easy and highly precise appearance inspections such as dimension measurement and defect inspection of semiconductor chips. Thanks to Z-axis image synthesis processing, even when using high-magnification lenses, deep images can be obtained quickly, and planar correction can be performed on inclined workpieces. Cameras, lenses, PCs, and other market devices can be freely used, and real-time observation with line cameras is also possible. Customization according to customer specifications is available. 【Features】 ■ High-speed long depth measurement (multi-focus imaging) ■ High-precision measurement ■ Freely configurable image processing flow ■ High-speed 6-surface inspection measurement ■ Damage-free handling mechanism *For more details, please refer to the related links or feel free to contact us.

• Visual Inspection Equipment

We would like to introduce our "High-Performance Appearance Inspection System." With HALCON-based image processing, you can create flows using drag-and-drop, allowing the use of the advanced HALCON library without any programming knowledge. Additionally, it can detect edge defects and scratches below 1μm (at 20X magnification) and perform edge inspections for chipping and overflow from any virtual line. 【Features】 ■ High-speed acquisition of deep images even when using high-magnification lenses ■ Plane correction can be performed on inclined workpieces ■ Detection of edge defects and scratches below 1μm is possible ■ Edge inspections for chipping and overflow from any virtual line can be conducted ■ Flow creation using drag-and-drop for HALCON-based image processing is possible *For more details, please refer to the related links or feel free to contact us.

• Visual Inspection Equipment

In this document, we introduce how the power supplies handled by Daitron achieve low noise. Generally, switching power supplies generate noise due to the ON/OFF switching. Daitron has made improvements to this switching method. We will reveal the secret of a "power supply that does not produce noise" rather than just a "power supply that suppresses noise." [Contents] ■ Hard Switching and Soft Switching ■ Fundamental Issues of Switching Power Supply Noise ■ Summary *For more details, please refer to the PDF document or feel free to contact us.

• power supply

We will be exhibiting at the "IoT & 5G Solutions Expo [Autumn]" held at Makuhari Messe. Remote monitoring, predictive maintenance, production management, 5G solutions, local 5G, IoT data utilization, communication modules, M2M devices, and more will be showcased together. We plan to display collaborative products such as 5G-compatible devices, IoT products, and software products. We sincerely look forward to your visit. 【Exhibition Information】 <On-site Exhibition> ■ Dates: October 26 (Wed) - 28 (Fri), 2022 ■ Hours: 10:00 AM - 6:00 PM (Ends at 5:00 PM on the final day) ■ Booth Number: 16-6 <Web Exhibition> ■ Dates: October 4 (Tue) - November 14 (Fri), 2022 *For more details, please refer to the PDF document or feel free to contact us.

• Production Management System

【Features】 - Can be used as current introduction terminals for vacuum containers, pressure vessels, etc. - The shell is made of stainless steel, so there is no concern about corrosion. - Since it is glass-sealed, it has excellent airtightness (below 1×10^-10Pa·m3/sec). - Floating type manufacturing is also possible. (Left photo: External conductor - flange integrated type, Right photo: Floating type) 【Structure and Surface Treatment】 - The shell has an O-ring groove processed. - The shell is finished with nickel plating.

• Other Connectors

【Features】 - Can be used as a light introduction terminal for vacuum containers, pressure vessels, etc. - The shell is made of stainless steel, and there are no brazed areas at the sealing part, eliminating concerns about corrosion and providing excellent environmental resistance. - Since it is glass-sealed, it has excellent airtightness (below 1×10^-9 Pa·m³/sec). 【Structure and Material】 - The shell is machined with an O-ring groove. - The ferrule is made of zirconia, and the ferrule end face is polished with PC.

• Other Connectors

【Features】 - Can be used as current introduction terminals for vacuum containers, pressure vessels, etc. - Compatible with MIL-DTL-24308 high-density D-sub plugs. - High-density type with a larger number of pins in the same shell size as standard D-subs. - Excellent airtightness due to glass sealing (less than 1×10^-9 Pa·m³/sec). 【Structure and Surface Treatment】 - The flange part of the shell is machined with an O-ring groove. - The shell has a nickel-plated finish.

• Other Connectors

【Features】 - The outer conductor is made of stainless steel, and there are no soldered areas at the sealing part, eliminating concerns about corrosion and providing excellent environmental resistance. - The glass sealing ensures superior airtightness (below 1×10^-10 Pa·m³/sec) and maintains high reliability. 【Structure and Surface Treatment】 - The shell is machined with an O-ring groove. - The shell has a nickel-plated finish.

• Coaxial Connectors

【Features】 - Can be used as a current introduction terminal for vacuum containers, pressure vessels, etc. - Compatible with MIL-DTL-83513 Micro-Dsub connector plugs. - Ultra-small high-density type with a contact pitch of 1.27mm. - Excellent airtightness due to glass sealing (less than 1×10^-9 Pa·m³/sec). 【Structure and Surface Treatment】 - The flange part of the shell is machined with an O-ring groove. - The shell has a nickel-plated finish.

• Rectangular Connector

【Features】 - The shell is made of stainless steel, so there is no concern about corrosion. - It is glass-sealed, ensuring excellent airtightness (below 1.0×10^-10 Pa·m³/sec) and maintaining high reliability. 【Structure and Surface Treatment】 - The shell has an O-ring groove machined into it. - The shell has a nickel-plated finish.

• Coaxial Connectors

【Features】 - Since it is glass-sealed, it has excellent airtightness (1.0×10^-10 Pa·m³/sec or less) and maintains high reliability. - It can be used as a current introduction terminal for vacuum vessels, pressure vessels, and more. 【Structure and Surface Treatment】 - The shell is machined with an O-ring groove. - The shell has a nickel-plated finish.

• Coaxial Connectors

【Features】 - The shell is made of stainless steel, so there is no concern about corrosion. - It can connect to Category 5e type cables. - Data transmission is compatible with 1000BASE-T. - It is glass-sealed, providing excellent airtightness (less than 1.0×10^-10 Pa·m³/sec) and maintaining high reliability. 【Structure and Surface Treatment】 - The shell has an O-ring groove processed. - The shell has a nickel-plated finish. - The shield is not connected.

• Other Connectors

【Features】 - Can be used as a current introduction terminal for vacuum containers, pressure vessels, etc. - Compatible with MIL-DTL-24308 D-sub plugs. - Excellent airtightness (1.0×10^-9 Pa·m³/sec or less) due to glass sealing. 【Structure, Material, and Surface Treatment】 - The type of thermocouple is K type (Alumel, Chromel). - The flange part of the shell has an O-ring groove processed. - The shell has a nickel-plated finish.

• Rectangular Connector

【Features】 - Can be used as a relay connector under vacuum conditions. (Type S is compatible with the DDB series.) - The contact wiring method is crimping. - The shell is made of Teflon or ceramic, providing excellent outgassing characteristics. 【Structure and Surface Treatment】 - The shell has a monoblock structure. - The contacts are finished with gold plating on a copper alloy.

• Rectangular Connector

【Features】 - The insulator uses PEEK or ceramic, exhibiting excellent outgassing characteristics at high vacuum levels. - It is compatible with the hermetic connector HMSB series. - The contact connection method is crimping. 【Structure and Surface Treatment】 - The insulator has a monoblock structure. - The contacts are finished with gold plating on a copper alloy.

• Circular Connectors

This document provides a detailed introduction to the usefulness of low-noise power supplies in galvanometers, using diagrams. It includes sections such as "What is a galvanometer?" and "Applications used." A galvanometer scanner is a control device that directs laser light to a pinpoint by controlling the laser light reflection mirror (galvano mirror) at the tip of the galvanometer motor in two axes, and in some cases, a lens in a third axis. Please take a moment to read it. [Contents] ■ What is a galvanometer? ■ In other words, this is what it means ■ Applications used *For more details, please refer to the PDF document or feel free to contact us.

• power supply

This document introduces the usefulness of low-noise power supplies for photomultiplier tubes. It explains "What is a photomultiplier tube?", "Applications of photomultiplier tubes," and "The usefulness of low-noise power supplies in photomultiplier tubes," using diagrams. The advantages of using photomultiplier tubes include the ability to perform high-speed measurements even over large areas and the capability to achieve various operating ranges by changing the supply voltage. We encourage you to read it. [Contents] ■ What is a photomultiplier tube ■ Applications of photomultiplier tubes ■ The usefulness of low-noise power supplies in photomultiplier tubes *For more details, please refer to the PDF document or feel free to contact us.

• power supply

This document provides an easy-to-understand explanation of the "usefulness of low-noise power supplies in X-ray imaging," accompanied by photos and illustrations. It includes a wealth of information on topics such as "the mechanism of X-ray imaging," "the mechanism of the detection area (detector)," and "signal processing." In recent years, X-ray imaging of the human body has been minimized in terms of radiation exposure, reducing the amount of X-ray irradiation as much as possible. As a result, noise in the analog signals of the detector, which is the receiving part, has a significant impact on the images. Additionally, in industrial applications, attempting to image thicker materials at the same output similarly results in noise affecting accuracy. We believe that using low-noise power supplies can be a key to solving these issues. Please feel free to download and take a look. *For more details, please refer to the PDF document or feel free to contact us.*

• power supply

We would like to introduce our EC site "Daitron EC-SHOP." We offer a lineup that includes connectors (for industrial, broadcasting, wireless, measurement, and various connection components), communication equipment, various semiconductors, and imaging devices (cameras, lenses, peripherals, monitors, touch panels), among others. We also feature recommended products, so please take a look through the related links below. *For more details, please refer to the related links or feel free to contact us.*

• connector

We offer a wide range of "ultra-low noise switching power supplies," including products that support low ripple noise of at least 1mV and those that meet medical device standard 60601-1. We are pleased to announce a free webinar themed "The Potential of Switching Power Supplies Realizing Low Noise." In addition to introducing the features and benefits of low-noise power supplies by our employees, we have a special segment where Mr. Hiroyuki Sakai and Mr. Tomoyuki Sato, the president and director of the audio manufacturer OLIOSPEC, will discuss case studies on the introduction of Daitron power supplies in high-end audio. If you are involved in the design and research of devices that require the detection of analog signals with linearity and are struggling with micro-signal detection or fine control, we encourage you to participate. 【Event Overview】 "Power Supply Performance Required for Fine Control and Detection - The Potential of Switching Power Supplies Realizing Low Noise" Date and Time: October 4, 2023 (Wednesday) 13:30 - 14:30 Location: Online via MS-Teams Live Event Capacity: Up to 100 participants Participation Fee: Free *If you wish to participate, please register by 18:00 on September 28, 2023, using the URL below.

• Technical Seminar

We will hold a webinar titled "Introduction to the Button Battery Type Temperature and Humidity Data Logger iButton by Analog Devices." In this webinar, we plan to introduce the features of the iButton, product details, and how to use the Japanese software provided by our company. The iButton is a "temperature and humidity" data logger characterized by its small size, lightweight, and high durability, packaged in a stainless steel can with a diameter of approximately 16mm. We sincerely look forward to your application. 【Webinar Overview】 ■ Date and Time: May 15, 2024 (Wednesday) 13:30 - 14:30 ■ Method: Online (scheduled to be held as a MS-Teams live event) ■ Capacity: Up to 100 participants ■ Application Deadline: Until May 13, 2024 (Monday) 18:00 ■ Participation Fee: Free *For more details, please refer to the related links or feel free to contact us.

• Data Logger

The i-Button is a compact data logger that can record temperature and humidity. It is housed in a 16mm stainless steel case, offering excellent durability and waterproofing (IP56), making it suitable for a wide range of applications, including environmental data logging. We have released a video content titled "iButton Introduction Webinar held on May 15, 2024," which includes product descriptions and information about the software, so please make use of it. 【Reader/Adapter and Software for PC Connection】 ■ iButton connection adapter: DS1402D-DR8+ ■ Adapter from USB to 1-Wire/iButton: DS9490R ■ Use the OneWireViewer (Japanese version) software to read log data. *For more details, please refer to the PDF document or feel free to contact us.

• Data Logger

The "5PG2 Series" is an uninterruptible power supply that achieves approximately 50% longer battery life through Eaton's proprietary technology. During normal operation, it supplies power directly to the load equipment without going through the battery. Equipped with a transformer, it protects against surges and noise, as well as voltage drops and overvoltage. Additionally, power protection software IPP, which safely shuts down the system during power failures, can be downloaded for free. 【Features】 ■ Line-interactive type ■ Expected battery life of 5 years ■ Free provision of power protection software IPP ■ Just-sized 200V tower type ■ High efficiency of up to 97% Daitron is a certified authorized distributor in Japan for Eaton. *For more details, please download the PDF or feel free to contact us.

• UPS/Uninterruptible Power Supply

The "9SX Series" is an uninterruptible power supply (UPS) that uses a continuous inverter system to provide stable, high-quality power. The continuous inverter power supply method does not have a switching time during power outages (no momentary interruption), making it suitable for environments where momentary power outages are not acceptable. Additionally, with its unique charging technology, the battery life is extended by approximately 50%. Furthermore, by adding extended batteries, the operating time during power outages can be increased. 【Features】 ■ Continuous inverter power supply method ■ Expected battery life of 5 years ■ Extendable battery operating time ■ Free power management software IPP provided ■ Top-class global market share Daitron is a certified authorized distributor in Japan for Eaton. *For more details, please download the PDF or feel free to contact us.

• UPS/Uninterruptible Power Supply

Our "Ultra Low Noise Power Supply Series" achieves the compactness, lightweight, and high efficiency characteristic of switching power supplies while maintaining noise performance equivalent to linear power supplies. This significantly reduces the man-hours required for noise countermeasures across the entire customer system and alleviates the burden on design. It can be widely used from measurement and analysis equipment to semiconductor manufacturing equipment. 【Features】 ■ Ultra-low output ripple noise of 1mV (RFS series) ■ Super low output ripple noise of 10mV (LFS, PFS series) ■ Low noise terminal voltage (input feedback noise), low noise electric field strength (radiated noise) ■ Low leakage current ■ Significant reduction in output common mode noise (RFS series) *For more details, please refer to the PDF document or feel free to contact us.

• Switching Power Supply

We offer AC-DC switching power supplies that are compact, lightweight, highly efficient, and also pursue low noise characteristics. Starting with the 'RFS series,' which achieves an ultra-low output ripple noise of just 1mV, we have the 'LFS series' and 'PFS series,' which have obtained medical device standard 60601-1. We also suppress noise terminal voltage, noise electric field strength, output common mode noise, and more, contributing to a reduction in the labor required for noise countermeasures. Additionally, switching from linear power supplies allows for space-saving. 【Features】 ■ A lineup of products that support a minimum of 1mV low ripple noise ■ Compatible with input voltages of 85-264 (VAC) ■ Suitable for applications such as electron microscopes, medical lighting devices, and semiconductor manufacturing equipment, where low noise and low leakage current are required. *For more details, please refer to the product catalog available for download as a PDF.

• Switching Power Supply

The PFS300A is an ideal power supply for embedded applications in advanced medical devices, thanks to its features of ultra-low leakage current, low noise terminal voltage, and low noise electric field strength! It is particularly suitable for medical diagnostic equipment, bioanalyzers, and ultra-fine measurement and inspection devices. By adopting a composite resonant type, it provides a clean DC power supply for noise-sensitive applications while achieving groundbreaking features such as compact size, lightweight, and high efficiency. 【Features】 ■ Reinforced insulation * Medical standard between primary and secondary ■ Ultra-low ripple noise (10mV) ■ Low noise terminal voltage and low noise electric field strength ■ Low leakage current (0.2mA at 264Vac) ■ Safety standards: 62368-1, 60601-1 * For more details, please refer to the PDF document or feel free to contact us.

• Switching Power Supply

The "LFS50A/LFS150A" is an ultra-low noise switching power supply that employs a composite resonance type method. It provides a clean DC power supply for noise-sensitive applications while achieving groundbreaking features such as compact size, lightweight, and high efficiency. With low leakage current, low noise terminal voltage, and low noise electric field strength, it is particularly ideal for advanced ultra-fine measurement and inspection equipment, as well as various medical and bio-device embedded applications. 【Features】 ■ Reinforced insulation * Medical standard between primary and secondary ■ Ultra-low ripple noise ■ Low noise terminal voltage and low noise electric field strength ■ Low leakage current (0.15mA at 264Vac) ■ Safety standards: 62368-1, 60601-1 * For more details, please refer to the PDF materials or feel free to contact us.

• Switching Power Supply

The "RFS50A" is an ultra-low noise power supply that further reduces noise from our ultra-low noise power supplies, making it an extremely low noise power supply. It can provide a clean DC power supply for noise-sensitive applications. It is particularly ideal for embedded applications in advanced ultra-precision measurement and inspection equipment, as well as various medical and bio devices. 【Features】 ■ Extremely low ripple noise: 1mV ■ Significant reduction in common mode noise ■ Low noise terminal voltage and low noise electric field strength ■ Low leakage current (0.15mA at 264Vac) ■ Safety standard: 62368-1 ■ Primary-secondary insulation withstand voltage: 4kVac (1min) *For more details, please refer to the PDF document or feel free to contact us.

• Switching Power Supply

We will be exhibiting at the "Automotive Technology Exhibition 2022 YOKOHAMA" held at Pacifico Yokohama. This exhibition is one of the largest technology exhibitions in Japan for automotive engineers to showcase new technologies and products to the world. Additionally, the exhibition will also be held online. Customers who find it difficult to visit the venue are encouraged to attend the online exhibition. We sincerely look forward to your visit. 【Event Overview】 ■ Dates: May 25 (Wednesday) - 27 (Friday), 2022 10:00 AM - 6:00 PM (until 5:00 PM on the last day) ■ Venue: Pacifico Yokohama *For more details, please refer to the related links or feel free to contact us.

• Other Auto Parts