リンケージ List of Products and Services

Jimatec, which has been manufacturing end effectors and suction pads in-house from tool changers, has started importing products from other manufacturers to accommodate a wider range of applications. Of course, they continue to follow their traditional modular design, making it easier to optimize their lineup according to specific uses.

• Other industrial robots

The EQCxx electric tool changer is available for applications that require automatic exchange of grip elements. This system consists of an active part (EQCxx-A) and a passive mechanical tool plate (EQCxx-B). The active part is typically connected to the robot wrist and is connected to one or more interchangeable grip elements with flanges. • Fully automatic version. • Plug and play system. • Designed for use with collaborative robots. • Optional ISO 9409 flange for direct interface with robots. • M8x1 8-pin main power connector. • 24 Vdc low voltage supply. • Up to six connections for pneumatic users. • Optional electrical connection that can be positioned in the central through hole.

• Pneumatic Equipment

The industry's first proximity switch that can detect three positions, such as "fully open, grip, fully closed" for the chuck and "pull, intermediate, push" for the cylinder, with a single sensor body.

• Pneumatic Equipment

• Design for EOAT. • Double action. • Flat profile. • Opening stroke adjustment (1). • Polyurethane shock absorber (2). • Optional proximity sensor (3). *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

• XT-…: 3-jaw parallel opening and closing gripper. • Double acting. • Excellent cost/performance ratio. • Lightweight; made of alloy and plastic resin structure. • The gripper can be mounted on two sides. • Optional magnetic proximity sensor. • FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• XR-…: 2-finger 90-degree opening and closing gripper. • Double acting. • Excellent cost/performance ratio. • Lightweight; made of alloy and plastic resin structure. • The gripper can be mounted on two sides. • Optional magnetic proximity sensor. • FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Double-acting drive on both sides. • Bore diameter: 25mm. • Angular stroke adjustable up to a maximum of 12°. • Compatible with all accessories in the MFI series. • Optional magnetic proximity sensor. • FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

【Connection】 Several optional components are available from Gimapick to facilitate electrical and pneumatic connections. 【Sleeve Socket Joint】 Used with a 12mm diameter sleeve for wiring and air tubes. The sleeve locking bracket has high resistance to tension, twisting, and vibration during fixation. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Pneumatic Equipment

• Single-acting. • Optional magnetic proximity sensor. • FDA-H1 food grade grease.

• Pneumatic Equipment

For more details, please refer to the catalog. Feel free to contact us as well.

• Pneumatic Equipment

• The junction box facilitates the connection of sensors. • The junction box allows for the replacement of damaged sensors through partial removal. • Up to six sensors can be connected. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

【Swivel Interface C31】 • When it is necessary to rotate the axis of the gripper by 90° (vertical-horizontal), use the Interface C31 in conjunction with the Swivel Actuator R32. • Weight: 0.360 kg. 【Swivel Interface C32】 • When it is necessary to rotate the axes of two grippers by 90° (vertical-horizontal), use the Interface C32 in conjunction with the Swivel Actuator R32. • Weight: 0.440 kg. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Pneumatic Equipment

• Use interface A25 if the rotation and/or picking axis must be at a 90° angle to the movement axis. • Weight: 0.540 kg. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

It is a single device that incorporates a chronometer, testers for analog and digital sensors, a peak detector, a cycle counter, and a pulse counter. These functions are included in monitoring cycle time and actuator vibration. In practice, by connecting two proximity sensors to terminal blocks A and B, it is possible to not only count the system cycles but also inspect them and monitor characteristic times (instantaneous, average, maximum, etc.). Furthermore, the peak detection function allows for the actuator to be operated in an optimal motion state, enabling monitoring of instantaneous vibration levels. Once the cycles are optimized, durability testing can be conducted using the pulse counter function. Each value is displayed on a backlit LCD screen equipped with Zoom, Power Safe, and Auto Power-Off functions. Everything is supplied in a box that includes tools, two magnetic proximity sensors with adapters, an analog sensor for vibration, a power unit for durability testing, and two batteries for field adjustments.

• Pneumatic Equipment

• Nylon clamp for securing sensors on micro cylinders. • Available in various sizes. • Comes with steel bolts and fixing screws. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Nylon clamp for sensor tightening on micro cylinders. • Available in various dimensions. • Comes with steel bolts and fixing screws. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

In larger sizes, the magnet is built into the piston. An optional housing is available for the SN series sensors. One or two sensors can be mounted on the gripper. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Aluminum clamp for rod-style or tie rod cylinders. • Available in various dimensions. • Steel bolts and fastening screws, with locking plate. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Fiberglass reinforced nylon slot adapter kit. • For models C-, T-, and dovetail slots. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Detects shock/vibration and changes the output state of the circuit. • Prevents damage to general mechanical actuators (linear or rotary type). • Utilizes micro-electromechanical systems (MEMS) technology. • Monitors any system vibrations and adjusts and resolves malfunctions as necessary. • Special layout that can be mounted on any actuator. • M8 connector output. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Reed sensor without output-compatible indicator light. • No issues during vibration. • Cable with M8 or SNAP connector output. • 100% traceable. • Standard C-slot or T-slot inline mounting. • Slot adapter available as an option. • Cable extension options of 2.5m, 5m, or 10m. • Axial or vertical mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Lead or GMR sensor. • PNP or NPN logic output. • No issues during vibration. • Cable or SNAP connector output. • 100% traceable. • Optional cable extensions of 2.5m, 5m, and 10m. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Lead or GMR sensor. • PNP or NPN logic output for magnetoresistive sensors. • No issues during vibration. • Cable or SNAP connector output. • 100% traceable. • Optional cable extensions of 2.5m, 5m, and 10m. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Lead or GMR sensor. • PNP logic output for magnetoresistive sensors. • No issues during vibration. • Cable with M8 or M12 connector output. • 100% traceable. • Optional cable extensions of 2.5m, 5m, and 10m. • Axial mounting. • High protection rating (IP68). *For more details, please refer to the catalog. Feel free to contact us.*

• Pneumatic Equipment

• Lead or GMR sensor. • PNP or NPN logic output for magnetoresistive sensors. • No issues during vibration. • Cable, SNAP or M12 connector output. • 100% traceable. • Optional cable extensions of 2.5m, 5m, or 10m. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Lead or magnetic resistance GMR sensor. • PNP or NPN logic output for magnetic resistance sensors. • No issues during vibration. • Cable or SNAP connector output. • 100% traceable. • Comes with a special adapter applicable to multiple dovetail slots. • Optional K-CB slot adapter. • Optional extensions of 2.5m, 5m, and 10m. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Lead or GMR sensor. • PNP or NPN logic output for magnetic resistance sensors. • No issues during vibration. • Cable or M8 connector output. • 100% traceable. • Standard T-slot inline mounting. • Optional K-SENS slot adapter. • Optional cable extensions of 2.5m, 5m, or 10m. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Lead or GMR sensor. • PNP or NPN logic output for magnetoresistive sensors. • No issues during vibration. • Cable or M8 connector output. • 100% traceable. • Standard T-slot inline mounting. • Optional K-SENS slot adapter. • Optional cable extensions of 2.5m, 5m, and 10m. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Lead or GMR sensor. • PNP or NPN logic output for magnetic resistance sensors. • No issues during vibration. • Cable or M8 connector output. • 100% traceable. • Standard T-slot inline mounting. • Optional K-SL slot adapter. • Optional cable extensions of 2.5m, 5m, and 10m. • Axial or vertical mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• GMR sensor. • 0-10Vdc analog output. • No issues during vibration. • Cable or M8 connector output. • Direct connection to standard C-slot or T-slot. • Optional K-SENS slot adapter. • Optional cable extensions of 2.5m, 5m, or 10m. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• GMR sensor. • 0-10Vdc analog output. • No issues during vibration. • Cable or M8 connector output. • Direct connection to standard C-slot or T-slot. • Optional K-SENS slot adapter. • Optional cable extensions of 2.5m, 5m, or 10m. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Programmable GMR magnetic resistance sensor. • Three independent digital outputs. • Output programmable for NO or NC logic. • Versions with PNP output or NPN output are also available. • Cable or M8 connector output. • 100% traceable. • Standard C-slot inline mounting. • Slot adapter available upon request. • Optional cable extensions of 2.5m, 5m, or 10m. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• GMR sensor. • PNP or NPN logic output. • No issues during vibration. • Cable or M8 connector output. • 100% traceable. • Standard C-slot or T-slot inline mounting. • Optional K-SENS slot adapter. • Optional cable extension of 2.5m, 5m, or 10m. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Lead or magnetic resistance GMR sensor. • PNP or NPN logic output for magnetic resistance sensors. • No issues during vibration. • Cable or M8 connector output. • 100% traceable. • Standard C-slot or T-slot inline mounting. • K-SENS slot adapter available as an option. • Cable extension options of 2.5m, 5m, and 10m available. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• GMR sensor. • PNP or NPN logic output for magnetoresistive sensors. • No issues during vibration. • Cable or M8 connector output. • 100% traceable. • Standard C-slot inline mounting. • Optional K-SENS slot adapter. • Optional cable extension of 2.5m, 5m, or 10m. • Axial mounting. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Air equipment for joint locking or unlocking. • The pivot point very close to the surface of the suction cup is a patented design. • Minimal lateral displacement during rotation. • Minimal displacement of the suction cup during lifting. • FDA-H1 food-grade grease. • Pressure range: -1 to 8 bar. • Available in two sizes. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Aluminum body and steel rod. • Rod lock (NO) or rod unlock (NC) mechanism using air. • Rod with high load capacity and anti-rotation feature. • FDA-H1 food grade grease. • Pressure range: -1 to 8 bar. • Optional sensors (SS or SI type). *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Aluminum body and iron rod. • Rod lock (NO) or rod unlock (NC) mechanism using air. • Non-locking rod. • FDA-H1 food grade grease. • Pressure range: -1 to 8 bar. • Optional sensors (SS or SI type). *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Aluminum body and steel rod. • Rod lock (NO) or rod unlock (NC) mechanism using air. • Rod with high load capacity and anti-rotation feature. • FDA-H1 food-grade grease. • Pressure range: -1 ÷ 8 bar. • Optional sensors (SS or SI type). *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

Cylindrical body with a brake and a stop for the suspension.

• Pneumatic Equipment

Stainless steel body, rod, bearings, and springs. Ideal for suctioning large workpieces weighing over 10 kilograms. The robust bearing structure that withstands side loads contributes to stable operation.

• Pneumatic Equipment

• Anodized aluminum body and rod. • Sealing without a seal. • For vacuum applications only. • When the cup takes the part, the vacuum in the internal piston exceeds the spring force, moving the rod upward. • The speed of the retraction operation can be adjusted by a standard throttle valve. • When the vacuum is released, the part is opened, and the internal spring resets the rod. • Pressure range: -1 to 0 bar. • FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Stainless steel body, rod, and spring. • No rotation stop; rod. • FDA-H1 food grade grease. • Pressure range: -1 to 8 bar. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Anodized aluminum main body and rod. • Without stop ring - rod. • Pressure range: -1 ÷ 8 bar. • FDA-H1 food grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Anodized aluminum main body and rod. • No rotation stop - rod. • Pressure range: -1 ÷ 8 bar. • FDA-H1 food grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment