リンケージ List of Products and Services

• Double acting. • High efficiency and high reliability due to the absence of moving parts. • 2 or 3 jaws. • Optional magnetic proximity sensor. • FDA-H1 food grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Double-acting type (single-acting type available upon request for PE-25... and PE-45...). • High efficiency and high reliability due to the absence of drive components. • A wide range of options for stroke length. • Grip force is consistent in both directions according to the total stroke. • Lightweight; due to alloy construction. • FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Pneumatic Equipment

• Winner of the Hannover IF Design Award 1999. • Diameter 25mm. • Stroke 50mm and 100mm. • No backlash. • High rigidity. • 5000km maintenance-free. • Hydraulic shock absorber (not available in P25...E). • Six built-in air leads for compressed air distribution (not available in P25...E). • Optional magnetic proximity sensor. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Easy-to-use gripper that can be connected and used immediately. • No power consumption while the gripper is engaged. • No programming required. • Gripper retention guaranteed even during power outages. • Self-adaptive jaw components. • Long-lasting brushless motor (brushless DC). • Built-in motor driver. • Low voltage power supply of 24 Vdc. • Standard M8X1, 3-pole connection. • PLC control possible as a pneumatic valve. • Exclusive automatic centering system. • Carbon fiber gear reduction. • Maintenance-free for 10 million cycles. • Well protected against dusty environments. • Optimal balance of weight, size, and power. • Compatible with rotary actuator fittings. • Optional inductive sensor. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Easy-to-use gripper that can be connected and used immediately. • No power consumption while the gripper is engaged. • No programming required. • Gripper retention guaranteed even during power outages. • Self-adaptive jaw components. • Long-life brushless motor (brushless DC). • Built-in motor driver. • Low voltage power supply of 24 Vdc. • Standard M8X1, 3-pole connection. • PLC control possible as a pneumatic valve. • Exclusive automatic centering system. • Carbon fiber gear reduction. • Maintenance-free for up to 10 million cycles. • Well protected against dusty environments. • Optimal balance of weight, size, and power. • Compatible with rotary actuator fittings. • Optional inductive sensor. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Flat profile. • Robust guide. • High grip strength. • Lightweight and compact dimensions. • High dimensional accuracy. • Spring closed (-NC) or spring open (-NO) options. • FDA-H1 food grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Double acting. • The sturdy construction is beneficial for heavy-duty applications that require a long lifespan without maintenance or trouble. • A wide range of options for grip strength and stroke length. • Grip strength is consistent in both directions according to the total stroke. • Flat profile. • Prepared for the installation of inductive proximity sensors. • FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Winner of the Hannover IF Design Award 1999. • Diameter 25mm. • Stroke 50/100/160/200/300/400 mm. • No backlash. • High rigidity. • 5000km maintenance-free. • Hydraulic shock absorber (not available for M25...E). • Six built-in air leads for compressed air distribution (not available for M25...E). • Optional magnetic proximity sensor. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

- Spring compensator The spring compensator is available for vertical applications of LV and LVP linear actuators that require balancing the weight of the system or load. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

For more details, please refer to the catalog. Feel free to contact us as well.

• Pneumatic Equipment

• Recirculating ball bearing guide system. • Easy to install and low cost. • Several mounting options using T-nuts. • Optional kits for accessories. • Available in any length up to 6000mm. • More than two carriers can be accommodated per rail. *For more details, please refer to the catalog. Feel free to contact us.*

• Pneumatic Equipment

• High rigidity and displacement resistance. • Maximum 30kg on the carrier. • Slide with built-in circulating ball bearings. • Exclusive belt drive system. • Hydraulic shock absorber on the carrier. • Optional additional shock absorber. • Optional second carrier. • Optional intermediate stopper. • Optional internal energy chain. • Optional magnetic proximity sensor. • Compatible with Gimapick system. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Double action. • High grip strength. • Ideal for heavy-duty applications. • Optional magnetic proximity sensor. • FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

- Two sizes are available at positions 4, 6, or 8. - Clockwise or counterclockwise (end A) is available. - High torque. - Ideal for heavy loads. - Through holes for cables and air tubes. - Reduced weight and overall dimensions. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

• Double-acting with optional spring (normally closed or normally open). • Long stroke or short stroke (1). • Can be fixed from the front with through screws (2). • High-efficiency power transmission (1). • Optional magnetic or inductive proximity sensors (3). • FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Pneumatic Equipment

• Combination type with other elements of the Gimapick system. • Bore diameter 32mm. • Stroke 50mm and 100mm. • No backlash. • High rigidity. • Hydraulic shock absorber. • Optional magnetic proximity sensor. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

If there are constraints on the power and current values of the in-flight cables, the capacitor box can limit the inrush current to 0.7A or less, enabling the use of Gimatic's electric grippers and tool changers with IO signals. Proven track record with robots from [Universal Robots], [FANUC], [DENSO WAVE/DENSO], [Yaskawa Electric], and [Mitsubishi Electric][TM, TECMAN].

• Pneumatic Equipment

Compatible with high-precision proximity switches: The OFF-ON-OFF false detection of product detection can be handled by a single proximity sensor.

• Pneumatic Equipment

Magnet gripper composed of a slim body with a diameter of 20mm: With a lightweight body of 70g, it is ideal for transporting small metal parts such as chips and inserts.

• Pneumatic Equipment

• Laser-cut galvanized steel. • Pre-drilled mounting pattern for QC90-B, MFI-A41, ISO9409-1. • Ideal for MFI brackets and hex nuts. The cataloged galvanized steel plates for small molding machine chucks contribute to universal chucking when combined with various brackets. They save not only costs but also storage space.

• Pneumatic Equipment

Vacuum cup made of integrally molded polyurethane that leaves few marks: WF series. Ideal for suction on large curved surfaces and asymmetrical shapes.

• Pneumatic Equipment

• Single-acting type with spring opening. • Several mounting accessories. • Steel claws. • Plastic-steel-aluminum composite material. • FDA-H1 food grade grease. • Tandem piston for high grip strength. • Optional sensors and clamps. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

The spring compensator is available for vertical applications of LV and LVP linear actuators that need to balance the weight of the system or load.

• Other FA equipment

A comprehensive catalog of all products and CAD data has been consolidated onto a single CD. We are currently offering it for free! <Products Offered> 【HANDLING】Handling products centered around general-purpose air grippers 【PLASTICS】Plastic products for robots used in injection molding machines 【MECHATRONICS】Mechatronics products such as electric grippers and linear motors 【SENSORS】Sensor products for detecting the operation of grippers and actuators For more details, please feel free to contact us.

• Pneumatic Equipment
• Other FA equipment

The Gimatic electric gripper, when integrated with KIT-GMP-G, enables operation in environments characterized by high standards of cleanliness and hygiene. An adapter allows the electric gripper to be secured to the robot's interface (not included) and protected with a disinfectable silicone cover. The grip fingers (not included) can be secured with special hygienic stainless steel screws. The system meets the strictest GMP (Good Manufacturing Practice) cleanliness standards for Grade A and B.

• Other FA equipment

【Supply Voltage】 MEAN WELL power supply (Series S) with universal AC input and 24V output. These devices can be connected in series to achieve a higher operating voltage (for example, 72V is required for ML2570X4 and ML2570X6 motors). 【Switch】 A variable voltage power supply set to 24V for general use, equipped with buttons for direct open/close control of mechatronics series electric grippers and actuators. Two versions are available: PNP or NPN input.

• Other FA equipment

For LV slides and LVP linear guide applications, if the standard SE series converters (SE9ABZ1 and SE9ABZ1-HR) do not meet the accuracy requirements or necessary dynamics, an external linear position converter can be adopted. This type of converter includes an active reading head (SEXT20SIN020) combined with a sticky magnetic strip (SEXT20BAND015), which can be installed on the sides of the LV slides and LVP linear guides. The reading head can be fixed to the LV slide using bracket LV25-KIT-05 and to the LVP linear guide using bracket LV25-KIT-15.

• Other FA equipment

Latest generation servo actuators for the Near Motor ML25 and ML40, with maximum bus voltages of 72 V (DRV070) and 325 V (DRV300).

• Other FA equipment

• Embedded linear motor. • Embedded encoder sensor. • Recirculating ball bearing guide system. • 200/300/400/500/700/1000 mm stroke. • T-nut mounting. • M12 standard electrical connection. • Compatible with several drives available on the market. • Optional magnetic induction sensor. • Compatible with LV electric linear actuators.

• Other FA equipment

• Embedded linear actuator. • Embedded encoder sensor. • Recirculating ball bearing guide system. • Stroke lengths of 50mm, 100mm, 150mm, and 200mm. • T-nut mounting. • M12 standard electrical connection. • Compatible with several drivers available on the market. • Optional weight compensator. • Optional magnetic induction sensor. • Compatible with LVP electric linear guides. *For more details, please refer to the PDF data available for download in the catalog.*

• Other FA equipment

ML linear motors and LV and LVP linear actuators can be provided with detectors and sensors for controlling operation. Identify the incremental position detector with code SE9ABZ1 and specify the feedback signal necessary for proper motor control in case initial timing operation cannot be performed with code SE9HALL1.

• Other FA equipment
• Pneumatic Equipment

Adopting a cylindrical shape, it can be used for various applications such as air cylinder replacement. < Specifications > - Two types of stators are available with bore sizes of Φ25mm and Φ40mm. - For slider lengths: For Φ25mm: 8 types ranging from 218mm to 820mm For Φ40mm: 9 types ranging from 238mm to 1342mm - External controllers are compatible with commercially available controllers, including those from OMRON (driven by a three-phase DC power supply: 75Vdc to 325Vdc). - The sliding components consist of only two simple parts: the stator and the slider. - There are no wear parts like gears or belts, ensuring a long life. - No seals are present, so lubrication such as grease is unnecessary.

• Other FA equipment

• Positions 4, 6, 8, or 12 are available. • Clockwise (End C) or counterclockwise (End A) operation is available. • High torque. • Ideal for heavy loads. • The mechanical index resets in case of accidental blockage. • Easy-to-handle gripper that is ready to use upon connection. • No power consumption when the index table is in the designated position. • No programming required. • Position retention guaranteed even during power outages. • Long-life brushless motor (brushless DC). • Built-in motor drive. • Low voltage power supply of 24 Vdc. • M8X1, 3-pin standard connection. • PLC control possible as a pneumatic valve. • Ball bearings. • Carbon fiber gear reduction. • Maintenance-free for 10 million cycles. • Optional magnetic sensor. *Please feel free to contact us for more details.*

• Other FA equipment

< 2-Point Electric Rotary Actuator > • Two types of rotation angles: 90° or 180° • Three types of rotation torque: 45, 80, and 138 Ncm • Easy-to-use gripper that is ready to use upon connection. • No power consumption when the actuator is in the designated position. • Built-in circuit board, no programming required. • Position holding guaranteed even during power outages. • Long-life brushless motor (brushless DC). • Built-in motor driver. • Low voltage power supply of 24 Vdc. • Standard M8X1, 3-pole connection. • PLC control is possible, similar to air valves. • No maintenance required for 10 million cycles. • Optimal balance of weight, size, and power. • Optional inductive sensor. < Clean Room Compatible > • MRE16180 complies with ISO 14644-1 clean room certification class 6. *For details, please refer to the PDF data available for download.

• Other FA equipment

• Easy-to-use gripper that can be connected and used immediately. • No power consumption while the gripper is engaged. • No programming required. • Gripper retention guaranteed even during power outages. • Self-adaptive jaw components. • Long-life brushless motor (brushless DC). • Built-in motor driver. • Low voltage power supply of 24 Vdc. • Standard M8x1, 3-pole connection. • PLC control possible as a pneumatic valve. • Exclusive automatic centering system. • Carbon fiber gear reduction. • Maintenance-free for 10 million cycles. • Well protected against dusty environments. • Optimal balance of weight, size, and power. • Compatible with rotary actuator fittings. • Optional inductive sensor. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Other FA equipment

• Easy-to-use gripper that can be connected and used immediately. • No power consumption while gripping. • No programming required. • Gripper retention guaranteed even during power outages. • Self-adaptive jaw components. • Long-life brushless motor (brushless DC). • Built-in motor driver. • Low voltage power supply of 24 Vdc. • Standard M8X1, 3-pole connection. • PLC control possible as a pneumatic valve. • Exclusive automatic centering system. • Carbon fiber gear reduction. • Maintenance-free for 10 million cycles. • Jaws included within the gripper profile. • Optimal balance of weight, size, and power. • Compatible with rotary actuator fittings. • Optional magnetic sensor. • S version with magnetic piece grip sensor on the jaws. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Articulated Robot
• Other FA equipment

• Easy-to-use gripper that can be connected and used immediately. • No power consumption while the gripper is engaged. • No programming required. • Gripper retention guaranteed even during power outages. • Self-adaptive jaw components. • Long-life brushless motor (brushless DC). • Built-in motor driver. • Low voltage power supply of 24 Vdc. • Standard M8X1, 3-pole connection. • PLC control possible as a pneumatic valve. • Exclusive automatic centering system. • Carbon fiber gear reduction. • Maintenance-free for 10 million cycles. • Jaws included within the gripper profile. • Optimal balance of weight, size, and power. • Compatible with rotary actuator fittings. • Optional magnetic sensor. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Other FA equipment

• Easy-to-use gripper that can be used immediately after connection. • No power consumption while the gripper is engaged. • No programming required. • Gripper retention guaranteed even during power outages. • Self-adaptive jaw components. • Long-life brushless motor (brushless DC). • Built-in motor driver. • Low voltage power supply of 24 Vdc. • M8X1, 3-pole standard connection. • PLC control possible as a pneumatic valve. • Exclusive automatic centering system. • Carbon fiber gear reduction. • Maintenance-free for 10 million cycles. • T-slot jaws for heavy loads. • Optimal balance of weight, size, and power. • Compatible with rotary actuator fittings. • Optional magnetic sensor. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Other FA equipment

Air Nipper GN Replacement Blades

• Pneumatic Equipment

Air nipper blade

• Pneumatic Equipment

The heated blade and double piston structure allow the GN nipper to cut safely and accurately. - Two sizes are available. - Double-acting operation with tandem cylinders. - Optional magnetic proximity sensor (1). - Optional blade heating system (2). - Blades (LA and LB) are available as spare parts.

• Pneumatic Equipment

• Integrated molded connectors or wired connectors for sensor and transducer connections. • Various solutions are possible with straight or angled cable outputs. • Solutions with PVC cables and PUR cables. *For more details, please refer to the catalog. Feel free to contact us.*

• connector

• M18x1 mm optical sensor. • 100 mm background suppression without adjustment work. • PNP/NPN digital output via programmable LO or DO pulse logic. • Embedded LED indicator. • 4-pin M12 connector output. • Small and lightweight plastic body. • Includes lock nut and washer. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• M18×1 mm ultrasonic sensor. • PNP/NPN digital output via NO or NC programmable logic. • Detection range of 40-300mm with programmable points via external teach. • 4-pin M12 output connector. • Small and lightweight plastic body. • Comes with lock nut and washer. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• Inductive sensor with interference prevention function. • Stainless steel sensor body and PBT sensing surface. • Embedded LED indicator. • PNP or NPN logic output. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment