リンケージ Product Lineup

Polyurethane air tube suitable for use with bamboo joints for compressed air.

• Pneumatic Equipment

Nipple with threaded mount

• Pneumatic Equipment

Fitting

• Pneumatic Equipment

- Patented COAXⓇ cartridge technology. - High vacuum flow capacity compared to energy consumption. - Lightweight inline design with push-in fittings. - Quick and easy direct attachment to hoses. - Cartridge COAXⓇ for high vacuum flow at 6 bar. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

<Stopper with General Purpose Suspension> • For all actuators and brackets with 14mm, 20mm, and 30mm fittings. • With through hole for air tube. • Clamp mount 2. • Optional magnetic proximity sensor. • Optional inductive proximity sensor (not for VMK14). • FDA-H1 food-grade grease. <Sensors (Optional)> The compression position of the suspension can be detected by a magnetic proximity sensor or an inductive proximity sensor (not for VMK14). *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Pneumatic Equipment

Spring rod

• Pneumatic Equipment

- Not for compressed air (vacuum only) - The arm is attached between the vacuum cup and the support with two female threads. - It is used to tilt the vacuum cup at a specified angle relative to the support. - It can be continuously set at angles from 0° to +/-90°. - One screw is tightened to fix the angle. - Built-in vacuum channel *For more details, please refer to the catalog. Feel free to contact us as well.

• Pneumatic Equipment

- The arm is mounted between the vacuum cup and the support with two male screws. - It is used to tilt the vacuum cup at a specified angle relative to the support. - It can be set at an angle between 0° and +/-150°. - Tighten the screws to fix the angle. - The vacuum lead is located inside the two half bodies. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

A vacuum cup specifically developed for transporting carbon fiber (CFRP) for BMW. It contributes to improving the efficiency of the transport process through vacuum suction on the transport line for internal components used in the i3 and i8. < Features > (1) PTFE Cup - A PTFE cup capable of transporting up to +250℃. (2) Silicone Bellows - The soft lip acts as a suspension, accommodating lateral movement. (3) Stainless Steel Nipple (4) The ribs on the cup surface enable suction of soft materials. (5) The flexible lip allows for stable suction even when the material is at low temperatures. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Pneumatic Equipment

- DuraflexⓇ vacuum cup - Polyurethane that is less likely to leave marks with a dual durometer - Sturdy and flexible bellows - Very soft lip, ideal for embossed surfaces

• Pneumatic Equipment

- DuraflexⓇ vacuum cup - Manufactured in a single unit - Polyurethane with dual durometer that minimizes marks - Sturdy and flexible bellows - Very soft lip, ideal for embossed surfaces

• Pneumatic Equipment

Nipple-equipped vacuum cup (flat type, flat oval type, 1.5-stage, 2.5-stage)

• Pneumatic Equipment

• CombiFlex vacuum cup. • Manufactured with a single port. • Polyurethane with dual durometer that is less likely to leave marks. • For curved and uneven surfaces. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

• The suspension (or buffer, or level compensator) is used to hold the suction cup in the designated position when the robot approaches. • Gimatic offers a wide range of special designs for plastic applications. • These are typically attached to the EOAT (End of Arm Tooling) using MFI. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

- Compatible with VP suction cups - M5 male thread *For more details, please refer to the catalog. Feel free to contact us.

• Pneumatic Equipment

- Two styles: flat or with 1.5 bellows - Two types of materials: silicone (SIL) or chloroprene (CR) - Diameter from 5mm to 11mm - Two nipples (AVP) 【Flat Type】 - Ideal for flat or slightly curved surface objects - Can also lift concave objects 【Bellows Type】 - Lifting action for separating thin objects - Not recommended for handling objects where the lifting force is parallel to the surface - Best for level adjustment *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Pneumatic Equipment

Select the appropriate nipple according to the vacuum cup (P type or G type) and according to the thread of the cup support.

• Pneumatic Equipment

- Two styles: flat or with 1.5 bellows - Four types of materials: silicone, EPDM, natural rubber, HNBR - Diameter from 11mm to 53mm *For more details, please refer to the catalog. Feel free to contact us as well.

• Pneumatic Equipment

- Double-acting main cylinder with a piston diameter of 32 mm and a stroke of 35 mm - Single-acting intermediate stopper - 36 mm clamp for GN-10 actuator - Used for the extraction of car bumpers - Optional magnetic proximity sensor - Includes spacer for stroke adjustment

• Pneumatic Equipment

- Can incorporate a slide nipper (with multiple cutting actions for sprue cutting) - Available in two sizes: 16mm and 25mm diameter - Spring closed (-NC) or spring open (-NO) - With sensor slot (S version) or without - Optional magnetic sensor - Adjustable stroke (up to 10mm) *For more details, please refer to the catalog. Feel free to contact us as well.

• Pneumatic Equipment

- Three sizes are available - Small dimensions - Can be used with several standard blades - With or without built-in slide - Double-acting slide, spring-close or spring-open - Optional magnetic proximity sensor *For more details, please refer to the catalog. Feel free to contact us as well.

• Pneumatic Equipment

- Ideal for trimming, gate cutting, and deburring - Angle adjustment of plus or minus 45 degrees is possible - Optional heat system

• Pneumatic Equipment

- Piston diameter: 10mm, 16mm, 25mm - Stroke: 10mm, 20mm, 30mm - Several accessories for clamp mounting on external diameter MFI... (1) - Several accessories for mounting on the rod (2) - Optional sensors and clamps (3) *For more details, please refer to the catalog.

• Pneumatic Equipment

• Double-acting. • Piston diameter: 40mm. • Stroke: 30mm or 50mm. • Several mounting accessories (1). • Optional magnetic sensor (2). • FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us as well.

• Pneumatic Equipment

- Single-acting pneumatic piston drive - Linear movement of the finger, perpendicular to the piston. - Finger with through hole, supplying vacuum to the cup (1). - Removable HNBR rubber pad on the finger (2) for soft touch - Optional sensor and clamp (3) *For more details, please refer to the catalog. Feel free to contact us as well.

• Pneumatic Equipment

- Single action. - Soft contact with HNBR pads or custom fingers, or O-rings made of NBR, silicone, or Viton. - Multiple mounting components. - Magnetic sensors and associated mounting brackets are also available. - FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

- Single-action type with spring reset - Φ20mm body can be clamped - Several mounting accessories - Modularity *For more details, please refer to the catalog. Feel free to contact us as well.

• Pneumatic Equipment

• A new concept with an innovative balloon gripper. • Upward movement. • The elastic components can be made of silicone or NBR. • The grip diameter ranges from 4.5 to 8.7 mm. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

A balloon gripper that holds the workpiece with the expanded outer diameter of the balloon. A balloon gripper with excellent maintainability. -> Adopts a unique structure where a single-acting air cylinder crushes the balloon. Since rubber parts are not crimped, maintenance can be performed on-site.

• Pneumatic Equipment

• Long lifespan, highly reliable, and maintenance-free. • Various options for fixation. • Optional magnetic proximity sensor. • Spring close (-NC) or spring open (-NO) options. • FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us.*

• Pneumatic Equipment

The proximity switch compatible model is ideal for replacing limit switches (LS) used for grip confirmation. < BB Series: Air Gripper > - Adopts a lightweight body made of aluminum die-cast (Zamak). Successfully reduced costs while maintaining the same quality as conventional machined bodies. - The flat body shape is a compact design that does not interfere during mounting at the head. - By changing the plug position, it is possible to change the air supply position.

• Pneumatic Equipment

• Single action. • Opens with a spring. • Adjustable closing stroke. • Optional magnetic proximity sensor. • FDA-H1 food grade grease. *For more details, please refer to the catalog. Feel free to contact us.*

• Pneumatic Equipment

Before the injection of plastic, it is necessary to install the metal insert into the mold. The gripper AGG-B can be attached to the EOAT, while the steel bush AGG-C can be attached to the mold. When the robot approaches the mold, the gripper is pressurized, allowing it to engage with the bush. AGG-21-B and AGG30-B are double-acting with safety springs, keeping the gripper engaged even without compressed air (NC). AGG19-B is single-acting with a reset spring (NO). *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

The sensor junction box is an interface designed to allow the adjustment of sensor signals to make them suitable for the control electronics of a PLC (Programmable Logic Controller). - It is used for sensors wired to the EOAT (End of Arm Tooling). - PNP and NPN signals can be converted. - I/O can be used for current sourcing (PNP), sinking (NPN), or with a dry contact. - Several boxes can be connected in series to manage more sensors. - Input LED indicators for easy troubleshooting (not available for SB15). - A kit is provided for tension relief and securing to the profile.

• Pneumatic Equipment

A variety of mounting brackets developed in-house for the gripper.

• Pneumatic Equipment

A variety of mounting brackets developed in-house for the gripper. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Pneumatic Equipment

An aluminum frame developed in-house for the gripper, along with a variety of mounting brackets. It features a user-friendly design that allows for disassembly and assembly using only a hex wrench and screwdriver, with a focus on lightweight and compactness. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

We offer a wide range of spools, product chucks, and suction pads unique to air gripper manufacturers. Our concept is based on "modular design," allowing for reconfiguration and fine adjustments on-site using only commercially available hex wrenches. By utilizing a variety of mounting parts, we can also accommodate the design, assembly, and support of the chuck body to match the shape of the product. *For more details, please download the catalog or contact us.*

• Other industrial robots
• Pneumatic Equipment

A 90-degree swivel link is attached to a single-acting air cylinder, making it ideal for lightweight hands and structural simplification, starting with Cartesian robots. This actuator, which is quite rare in the market, is effective for mounting on movable parts rather than fixed locations, especially for vacuum suction of lightweight workpieces. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

A tool changer (quick changer) designed for pick-and-place robots and multi-joint robots with the following payload capacity, available in "manual" and "air cylinder specifications." Since air is not used in the locking mechanism, locking and unlocking can be done with a single touch.

• Pneumatic Equipment

A robot hand that effectively reduces weight by utilizing a carbon fiber tube with an outer diameter of Φ20mm. It is compatible with ISO flanges (PCDΦ31.5mm, M5×4 locations), allowing for direct attachment to standard ISO flange-compatible robots. It features a Φ20mm bracket, making it widely adaptable for various actuators, from vacuum suction to grippers.

• Articulated Robot

• A new concept using a reduced footprint for sensors located at the rear position and grip area. • Optional magnetic proximity sensor. • The sensor switches on when the item is gripped. • Single-action drive with spring opening. • High grip strength. • Several mounting accessories available. • Steel claws. • FDA-H1 food-grade grease. • Protection against the intrusion of small foreign objects. • Heavy-duty end stroke.

• Pneumatic Equipment

- A lightweight single-action gripper designed for hand use. - A variety of claw options available: → No claws, with claws: aluminum, steel, with urethane pads, with HNBR pads (for preventing workpiece grip marks). → Models compatible with magnetic proximity switches. Instead of a micro switch, a magnetic proximity switch can be directly mounted on the finger. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Pneumatic Equipment

• Spring-open, single-acting. • Several mounting accessories. • Optional suspension kit. • FDA-H1 food-grade grease. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.*

• Pneumatic Equipment

The VHP-compatible electric gripper, which is in high demand in the fields of regenerative medicine, pharmaceuticals, and drug discovery, is being exhibited alongside DENSO's robots at Huis Ten Bosch. This is a solution for automating clean environments where humans can be a source of contamination.

• Other machine elements