タキロンポリマー List of Products and Services

Introducing the conductive nylon plate "PA 910CV (Black)." This product maintains stable conductivity after machining, with a volume resistivity of 10^3 to 10^5 Ω·m. It can be used for transport equipment, jigs, assembly workbenches, covers, and more. 【Specifications】 ■ Model Number: PA 910CV (Black) ■ Size: 600 × 1,200 ■ Thickness: 5mm to 30mm ■ Continuous Use Temperature: MAX 100℃ *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

Introducing the conductive PP plate 'PP P973CV (Black)'. This product has a volume resistivity of 10^0 to 10^2 Ω·m and demonstrates stable conductivity even after machining. By switching from materials with a specific gravity of 1.0 or higher, the parts are lightweight and workability is improved. Additionally, the shedding of conductive material due to friction is less compared to conventional conductive carbon blended products. 【Features】 ■ Good conductivity ■ Good wear resistance ■ Lightweight *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "cutting materials (color: blue)" handled by our company use raw materials that comply with FDA (U.S. Food and Drug Administration standards) and PIM (European Commission Regulation (EU) No. 10/2011). The blue color, which does not exist in natural foods, makes it easy to visually identify contamination when mixed with food. Material selection can be tailored to specific applications. 【Features】 ■ Polypropylene [Product Codes: PP 570, PP Marbo 570] - Heat resistance (continuous use temperature 100°C), dimensional stability during cutting, lightweight ■ Polyethylene [Product Codes: PE 520, PE Marbo 530] - Rigidity (bending modulus), machinability ■ Ultra-high molecular weight polyethylene [Product Code: UP 542] - Wear resistance, sliding properties, impact resistance *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

Our glass filler reinforced plate "Cutting Material (Color: Black)" is a product with minimal physical property differences in the extrusion direction and the straight direction. It reduces twisting and warping that are common in general glass-filled materials during cutting. Compared to unreinforced materials, it has improved bending elastic modulus, allowing for the selection of materials suited to specific applications. 【Features】 ■ Polypropylene [Type Number: PP 90G30] - Lightweight, chemical resistance - Thickness: 20mm, 50mm, 100mm - Glass filler content: 30% ■ Polycarbonate [Type Number: PCET 91G20] - Uses flame-retardant V-0 certified raw materials, double-sided milling finish - Thickness: 20-60mm - Glass filler content: 20% *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

Our company's electrostatic discharge countermeasure "Conductive Cutting Material (Color: Black)" is a conductive material with special carbon uniformly blended in. It maintains stable conductivity even after machining and complies with the RoHS2 directive. Material selection can be tailored to specific applications. 【Features】 ■ Nylon 6 [Product Number: PA 910CV] - Mechanical strength, heat resistance, sliding properties - Thickness: 5–30mm - Size: 600×1,200mm ■ Polypropylene [Product Number: PP P973CV] - Lightweight, chemical resistance, low contamination (decarbonization) - Thickness: 10–30mm - Size: 600×1,200mm *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The product is a glass filler material filled with 20% glass filler. It is finished to ensure that the maximum thickness difference within a single product is within 0.5mm through machining, reducing the man-hours required during cutting. Additionally, it has low anisotropy in both vertical and horizontal directions, which also reduces the occurrence of twisting and warping during cutting. 【Features】 ■ PC molded product containing 20% glass ■ Low anisotropy ■ Good machinability ■ Both sides are milled ■ Raw materials certified with UL combustion class V-0 *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This product is a glass-filled reinforced material in which 30% glass is uniformly dispersed in polypropylene. Compared to general PP, it has approximately twice the flexural modulus, an increase of about 10°C in heat deflection temperature, and a 30% reduction in linear expansion rate. Additionally, it reduces twisting and warping that are common in general glass-filled materials during machining. 【Features】 ■ PP molded product containing 30% glass ■ Low anisotropy ■ Improved physical properties ■ Good machinability ■ Continuous use temperature: MAX 100°C *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This product is a cutting material with excellent dimensional stability after machining. It is manufactured using raw materials that have obtained UL certified combustion class V-0. Additionally, it has excellent light-blocking properties, and even when machined down to a thickness of 0.5mm, the total light transmittance is 0%. 【Features】 ■ Good machinability ■ Excellent light-blocking properties ■ Raw materials certified with UL combustion class V-0 ■ Uses non-halogen flame retardants ■ Continuous use temperature: MAX 80℃ *For more details, please refer to the PDF document or feel free to contact us.

• plastic

This product is a cutting material with minimal burrs and warping during cutting, and it has good machinability. It is manufactured using raw materials that have obtained UL certification for combustion class V-2. Additionally, it has excellent light-blocking properties, and even when machined down to a thickness of 0.5mm, the total light transmittance is 0%. 【Features】 ■ Good machinability ■ Good color tone (PCET 1600) ■ Excellent light-blocking properties (PCET 1900) ■ Raw materials certified for UL combustion class V-2 (PCET 1900) *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This product has a continuous use temperature of up to 260°C and is a top-level super engineering plastic among thermoplastic resins. It shows high resistance, except for some strong acids such as concentrated sulfuric acid and concentrated nitric acid, and is composed of materials that comply with various standards. Additionally, it has high mechanical strength and toughness, making it suitable for use as a metal substitute. 【Features】 ■ High heat resistance ■ High toughness ■ Excellent chemical resistance ■ Complies with FDA regulations and PIM ■ Continuous use temperature: MAX 260°C *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This product has a bending modulus approximately 1.5 times that of "PP P370" and is a versatile cutting material that contributes to product thinning and precision machining. We offer "PP 922 (Dark Gray)" in thicknesses of 25mm to 50mm, with sizes of 1,000×1,000mm and 1,000×2,000mm. The load deflection temperature is approximately 30°C higher compared to "PP P370," allowing for a design that combines heat resistance and cost-effectiveness. 【Features】 ■ Bending modulus is approximately 1.5 times that of "PP P370" ■ Contributes to product thinning and precision machining ■ Load deflection temperature is approximately 30°C higher compared to "PP P370" ■ Design that combines heat resistance and cost-effectiveness is possible *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This product is a general-purpose cutting material with a larger diameter available domestically. We offer "PP301" with a thickness of 150mm and "PP Marubo 301" with nominal diameters of 320mm and 445mm. It can be used for applications such as semiconductor manufacturing equipment, plating equipment, and chemical pumps. 【Features】 ■ Larger diameter available domestically ■ Continuous use temperature: MAX 100℃ *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This product is a general-purpose cutting material with minimal burrs and warping during cutting, and excellent machinability. It is composed of materials that conform to each specification and generally exhibits minimal initial coloration and color change over time (yellowing) commonly seen in cutting-grade PP materials. Additionally, it complies with Ministry of Health, Labour and Welfare Notification No. 201 and can be used in the food sector for utensils, containers, and packaging. 【Features】 ■ Excellent machinability ■ Good color tone (natural) ■ Complies with the Food Sanitation Act ■ Complies with FDA regulations and PIM (natural, blue) *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This product is a transparent cutting material that can be used at higher temperatures than polypropylene, with a melting point of 240°C. It shows high resistance to acids and alkalis, except for some organic solvents such as toluene and trichloroethylene, and has low dielectric properties comparable to PTFE. Additionally, it does not hydrolyze even in boiling water, making it suitable for steam sterilization applications. 【Features】 ■ Heat resistance ■ Steam resistance ■ Excellent chemical resistance ■ Excellent electrical properties ■ Compliance with food application standards *For more details, please refer to the PDF document or feel free to contact us.

• plastic

This product is a cutting material that has further reduced deformation during cutting compared to conventional products (F2) through a unique special treatment. It does not use fillers or similar materials and has excellent resistance to acids, alkalis, and organic solvents. It can be used in semiconductor manufacturing equipment, plating equipment, valves, and more. 【Features】 ■ Unique special treatment ■ Reduced deformation during cutting ■ No fillers or similar materials used ■ Excellent resistance to acids, alkalis, and organic solvents *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

"Super Cast Nylon" is a high-performance nylon resin that enhances polymerization degree and crystallinity by directly polymerizing and molding monomers using the casting method. Compared to extruded nylon 6, it exhibits superior mechanical strength, heat resistance, and chemical properties. It also has self-lubricating properties and excellent wear resistance. Due to its high hardness and low viscosity, it has good machinability. 【Features】 - High-performance nylon resin with enhanced polymerization degree and crystallinity - Superior mechanical strength, heat resistance, and chemical properties - Self-lubricating and excellent wear resistance - High hardness and low viscosity - Good machinability *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

Introducing the cutting material monomer cast nylon, which excels in mechanical strength. This product can be used for sliding parts that require higher sliding properties than general products. 950 (Black) contains molybdenum disulfide, while 050 (Gray) contains a special lubricant. Additionally, 050 (Gray) has a low friction coefficient and superior wear resistance. 【Features】 ■ Excellent mechanical strength as a cutting material ■ 950 (Black) contains molybdenum disulfide ■ 050 (Gray) contains a special lubricant *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

"POM plates and round bars" are engineering plastic general-purpose cutting materials with minimal burrs and warping during machining, offering good machinability. They are composed of materials that have a low coefficient of friction, possess self-lubricating properties, and comply with various standards. This product is designated as "TS grade," which refers to cutting materials with excellent dimensional stability after machining that have passed our company's unique internal standards. 【Features】 ■ Good machinability ■ Excellent wear resistance ■ Complies with the Food Sanitation Act ■ Complies with FDA regulations and PIM (Natural) *POM960 does not comply. *For more details, please refer to the PDF document or feel free to contact us.

• plastic

This product is a PET material for machining that has been molded and processed using our company's unique raw materials. It has a well-balanced superiority in linear expansion rate, water absorption, mechanical strength, wear resistance, heat resistance, and dielectric strength, making it a cost-effective material. Additionally, it does not emit halogenated toxic gases during combustion and has a low combustion calorific value compared to other plastics. 【Features】 ■ Excellent physical properties ■ Excellent environmental suitability ■ Compliant with food sanitation laws *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This product has excellent wear resistance among plastics and is a general-purpose cutting material suitable for wear applications even under harsh conditions. It has a friction coefficient that is very low, second only to PTFE, and possesses extremely high self-lubricating and non-adhesive properties. It maintains high impact resistance even in extremely low temperature ranges, such as -100°C. It can be used for food machinery parts, general machinery parts, bearings, and more. 【Features】 ■ Excellent wear resistance ■ Good sliding properties ■ Impact resistance ■ Compliant with food sanitation laws ■ Usable for tools and packaging in the food sector *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

The "Urumora Plate Low Friction Grade (EX Glide)" exhibits stable low friction properties over a long period due to its special filler material blend. It has a sound-dampening effect, suppressing creaking and sliding noises by reducing friction. It reduces wear particles that cause friction. 【Features】 ■ Low friction grade with special filler material blend ■ Sound-dampening effect ■ Suppression of wear particles ■ Type/Model: UP 143SL (Natural) ■ Size: 1,000 × 2,000 ■ Thickness: 10mm to 50mm *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This is an introduction to the "HDPE Plates and Rods" that we handle. These products are compliant with standards for food applications and are made from materials that conform to the Food Sanitation Act, FDA regulations, and PIM standards. We offer both plate and rod types. 【Lineup】 ■PE 720/721 (Natural) ■PE 520 (Blue) ■PE Rod 730 (Natural) ■PE Rod 530 (Blue) *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This product is a high-density polyethylene molded item containing 10% boron oxide (B2O3). It has stable dispersibility, and thanks to our unique formulation technology, B2O3 is almost uniformly distributed throughout the plate. It can be used as a neutron shielding material in radiation management facilities such as nuclear power plants and hospitals. 【Features】 ■ Contains 10% boron oxide (B2O3) ■ High-density polyethylene molded item ■ Stable dispersibility ■ B2O3 is almost uniformly distributed throughout the plate ■ Type/Model: PE B770 (Natural) *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This product is a cutting material with excellent chemical resistance, characterized by minimal burrs and warping during cutting, and good machinability. It has excellent chemical resistance, with some selectivity for certain chemicals, fully demonstrating the characteristics of fluororesin. It can be used in semiconductor manufacturing equipment, plating equipment, valves, and more. 【Features】 ■ Minimal burrs and warping during cutting ■ Excellent machinability and outstanding chemical resistance ■ Superior chemical resistance ■ Fully demonstrates the characteristics of fluororesin *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Engineering Plastics
• Other cutting tools

This catalog is a comprehensive catalog of cutting materials from Takiron Polymer. It includes various products such as "Monomer Cast Nylon," "Polyacetal," and "Polyethylene Terephthalate." Our company provides a variety of industrial resin products based on specialized extrusion molding technology and cutting processing technology. Please feel free to consult us when needed. [Contents (Excerpt)] ■ Takiron Polymer Cutting Material Properties List ■ Monomer Cast Nylon ■ Polyacetal (Copolymers) ■ Polyethylene Terephthalate ■ Ultra-High Molecular Weight Polyethylene ■ Polyethylene (HDPE) *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• plastic
• Engineering Plastics