IEC List of Products and Services

The "Heat Cure System" is a system that integrates sealant application and halogen heat curing for adhesives and sealers, which traditionally required large-scale equipment for thermal curing. By using halogen heaters as the heat source, it reduces environmental impact through clean heating and improves productivity. 【Features】 ■ Reduction in power consumption costs ■ Improved maintainability ■ Compatibility with various shapes through robot teaching ■ Improvement of the working environment For more details, please refer to the catalog or feel free to contact us.

• Other painting machines

The "Silicone & Hot Melt Dispenser for Junction Box (PD44)" is a two-component mixing valve with an integrated metering section that allows for small volume dispensing. 【Features】 ■ Metering ratio: 1:1 to 25:1 (depending on rod size) ■ Dispensing capacity: 0.005cc/shot to 5.0cc/shot (depending on rod size) ■ Shot cycle count: Max 60 shots/min (air-driven type) For more details, please refer to the catalog or feel free to contact us.

• Other painting machines

The "2K Silicone Dispenser for Junction Box (PR70)" is a meter, mix & dispense system based on a control architecture. 【Features】 ■ Effective range of measurement pump: Each side 80 to 960 mm² ■ Effective range of air cylinder: Small 4560 mm², Large 10260 mm² ■ Stroke: Maximum 38.1 mm, Minimum 5.8 mm ■ Capacity per cycle: 2 to 70 cc ■ Pump cycles per liter: 500 to 14.3 For more details, please refer to the catalog or feel free to contact us.

• Other painting machines

The "Side/Edge Seal Hot Melt Dispenser (PGM)" is an adhesive application device for solar panels that utilizes a high-precision gear metering and dispensing system. 【Features】 ■ Flow Rate - Maximum (6cc/rev pump): 480cc/min - Maximum (20cc/rev pump): 1600cc/min ■ Maximum Liquid Supply Pressure: 1500psi (103.42bar, 10.34MPa) ■ Maximum Liquid Outlet Pressure: 2500psi (172.36bar, 17.24MPa) For more details, please refer to the catalog or feel free to contact us.

• Other painting machines

The "HFR Metering System" is a hydraulic-type fixed ratio metering system that always dispenses with accurate ratios, reducing material waste with stable flow and pressure. It dispenses accurately with a ratio accuracy of ±1% on ratio, minimizing scrap and reprocessing. Various applications such as bonding, potting, framing, injection, and foaming are available. 【Features】 ■ High-precision measuring device for high-viscosity two-component materials ■ Compatible with various advanced applications ■ Easy-to-understand and simple-to-operate display module ■ Clear interface - Reduces training time and minimizes operational errors For more details, please refer to the catalog or feel free to contact us.

• Other painting machines
• Other measurement, recording and measuring instruments

The "Twin Servo Booster Pump" is a device that achieves continuous and precise quantitative application by having two booster pumps alternate between discharge and filling. By accurately coordinating the servo motor at the top of the main unit with the valves on the discharge and filling sides, it enables consistent continuous discharge. During application pauses, automatic recirculation between the application gun and the pump starts, and temperature control of the main unit and pathways keeps the material viscosity constant. 【Features】 ■ Continuous discharge capable twin servo mechanism ■ Always possible to control temperature ■ It is also possible to pass temperature control water through the main unit For more details, please refer to the catalog or feel free to contact us.

• Other painting machines
• Other pumps

The "Rotary Joint" enables the independent rotation of the spray gun, improving the application efficiency of high-viscosity materials. It eliminates twisting and entanglement of hoses, enhancing the efficiency of the application work. Paint and air are connected through grooves carved inside the housing, allowing the spray gun to rotate independently. The robot is not restricted by hoses or other components. 【Features】 ■ Lightweight and compact size of 3.4 kg ■ Can be attached to existing spray guns ■ Uses special packing to transport high-viscosity materials without leakage ■ Temperature-controlled water circulation available (optional) ■ All connection parts are made of stainless steel for improved corrosion resistance For more details, please refer to the catalog or feel free to contact us.

• Other painting machines

"Solveair" is a solvent-air mixer that reduces the amount of solvent used during color change cleaning. The patented technology "Ratio Valve" from Kates in the United States corrects pressure changes caused by load variations in both the solvent and air lines, creating a mixed gas at an accurate ratio. This mixed gas maintains the cleaning effectiveness while reducing solvent usage by 50% during color change cleaning. 【Features】 ■ Achieves accurate mixing of solvent and air without affecting cleaning effectiveness ■ 50% reduction in VOCs For more details, please refer to the catalog or feel free to contact us.

• Other painting machines

The "Spring Auto Filter" is a spring-type filtration system that can be used continuously due to its fully automatic cleaning mechanism. The unevenness added to the stainless steel spring creates gaps that filter out waste materials as small as 20 microns, allowing only liquid to pass through. The waste materials collected on the surface are quickly discharged by a reverse flow of water, known as "backwashing." 【Features】 ■ High filtration efficiency for non-ferrous waste materials ■ Backwashing process to clean the collected waste materials ■ Sequential cleaning of filters arranged in a circular layout ■ Continuous use achieved by simultaneously performing filtration, cleaning, and discharge For more details, please refer to the catalog or feel free to contact us.

• Other filters
• Filtration Equipment

The "Magnet Auto Filter" is a magnetic separator that reduces total operating costs through an automatic cleaning and recovery system. It achieves automatic separation, cleaning, and discharge using magnetic force, and can be used continuously (patent obtained). The stainless steel core of the body comes in models ranging from 1 to 26, allowing selection based on flow rate. 【Features】 ■ Automatic cleaning mechanism for magnetic separation ■ Minimal material waste through the recovery system - Further processes the iron powder from the Magnet Auto Filter, reducing unnecessary waste ■ Capable of installing two or more in series to accommodate various flow rates ■ No additional pump required, allowing for flexible inline configuration design For more details, please refer to the catalog or feel free to contact us.

• Other filters

"StreamDoz" is an electric shot meter capable of high-speed robotic tracking control. It allows for precise dosing control using the "AUTOSTREAM" operated via a touch panel. We provide applications that are optimal for your system. 【Features】 ■ Reliable and flexible ■ Variety of coating shapes ■ Can be integrated into larger systems ■ Controls up to 5 temperature zones ■ Comprehensive pump management available For more details, please refer to the catalog or feel free to contact us.

• Painting Machine

The "INOBELL" is an electrostatic powder coating machine that enables painting on all types of surfaces. With its wide spray size, it achieves both high efficiency and high quality. The high-voltage rotary atomizer for powder coatings demonstrates overwhelming coating efficiency, especially on flat panels, and realizes a wide pattern unique to the bell. The wrap-around effect from the swirling pattern ensures beautiful painting quality, covering the work of two guns with this one machine. 【Features】 ■ High-efficiency coating pattern ■ Stable film formation ■ High coating efficiency For more details, please refer to the catalog or feel free to contact us.

• Painting Machine

The "PCF" is a high-speed mastic application system that achieves process acceleration through precise continuous flow measurement and supply systems. It consists of a "Control Center/Advanced Display Module (ADM)" for easy setup, monitoring, and system diagnostics, and a "Fluid Plate" that provides feedback to the system control for real-time adjustments of material temperature, viscosity, discharge ratio, and robot speed through sensors. 【Other System Components】 ■ Pump ■ Gateway Module ■ Graco CAN Cable ■ Nozzle/Gun For more details, please refer to the catalog or feel free to contact us.

• Other painting machines

The "3Way Gun TRIAS" is a spray gun specifically designed for high-viscosity materials, including automotive undercoating. It features a rotary shaft that rotates only at the tip, equipped with a nozzle head that can discharge in three directions. This enhances application efficiency and reduces takt time. Additionally, it has a built-in responsive drive solenoid, which contributes to increased speed. 【Features】 ■ Independent rotation at the tip ■ Lightweight design ■ Slit nozzle adopted ■ Three types of nozzles For more details, please refer to the catalog or feel free to contact us.

• Other painting machines
• Other processing machines

IEC Corporation is a technology trading company that focuses on building transfer supply systems for "fluids," including paints and high-viscosity materials. We have established our own lab for product testing and customization. We conduct equipment verification and various tests tailored to each customer's needs, leading to reliable responsiveness. In addition to improving line efficiency, we are actively engaged in selecting and developing customized and original products that also consider energy conservation. We respond to a wide range of requests with high technical capabilities. 【Business Content】 ■ Sales and proposals for industrial equipment and systems *For more details, please refer to our catalog or feel free to contact us.

• Other environmental equipment
• Weighing Control
• Flow Control