センターピア List of Products and Services

- It is a box capable of storing various communication devices (such as telephone terminals, optical connection boxes, and equipment for small LANs). - It can be installed in various locations, such as near the ceiling, in corridors, or in empty spaces and gaps in offices and server rooms. - With cable entry holes provided on the back, top, and bottom, it can be installed regardless of the location. - By adding an optional self-supporting base, it can also be installed independently. - The single-door design allows for easy opening and closing, and it opens wide enough to facilitate internal wiring work. - It features many slits to consider equipment heat dissipation and achieve lightweight construction. - Equipped with a cylinder key for enhanced security. - Compliant with EIA standards, it can accommodate 19-inch devices other than hubs.

• Racks and Cases
• Server Rack

This product monitors current consumption and power, and outputs data to management software. It enables visualization of current and power for connected devices and systems, as well as PUE calculation. <Product Features> - Outputs current and power as demand data - Measurement data can be wirelessly transmitted via an access point - The 16-circuit type can measure up to 16 points with a single unit - Management software can manage up to 254 units collectively - Threshold and alert settings are possible - Daily and monthly reports of measurement data can be output - Optional features allow for three-phase power measurement and temperature/humidity measurement - Achieves space-saving installation that can be easily mounted on distribution boards and PDUs <Benefits> - Streamlines PUE calculation as a countermeasure for benchmarking in the data center industry - Reduces manual measurement and management labor on-site - Enables monitoring of current and power for individual users within the data center - Wireless communication allows for minimal installation work and reduced installation costs *Please note that this product is intended for monitoring current consumption and power, and does not come with certification for electricity meters. It cannot be used for electricity billing.

• Power Monitoring Equipment

This is one of the racks with the most customization achievements among our products. We have received support from many clients, including data center operators, telecommunications carriers, hardware vendors, and construction contractors. 【Features of the Standard Rack】 ◆ High Versatility and Ease of Use We focused on high versatility and ease of use from an engineer's perspective, anticipating compatibility with all types of equipment and systems. ◆ Wide Range of Sizes Since we can accommodate individual requests, we can manufacture racks tailored to customer specifications regarding height, width, depth, and opening ratio. ◆ Extensive Delivery Record We provide high reliability and peace of mind to our customers with over 3,000 delivery records, including major telecommunications and data center operators.

• Server Rack
• rack
• Racks and Cases

This model combines essential earthquake resistance, cooling performance, load-bearing capacity, and security features required for 19-inch racks, with a particular emphasis on enhanced earthquake resistance. It is especially suitable for supercomputers and high-performance databases that operate critical data, as well as communication equipment that demands high availability (continuous operation). **Features of the Earthquake-Resistant Server Rack** ◆ High Earthquake Resistance It has a proven track record in tests based on the industry's most stringent earthquake resistance standards, such as "NTT Docomo Standards R08 to R12" and "Kobe Wave Amplification Wave 1000gal from the Southern Hyogo Earthquake." This is the product among our 19-inch racks that prioritizes earthquake resistance the most. ◆ High Opening Rate In the case of hexagonal punched doors, the opening rate can reach up to 82%. Using doors with a high opening rate is effective for heat dissipation within the rack. ◆ Fusion of Functionality and Design The doors not only emphasize aesthetic beauty but also enhance strength through a folded surface structure, ensuring stability against seismic vibrations.

• Server Rack
• rack
• Racks and Cases

19-inch Rack (Open Frame Type) for Center Pier This is an "open rack" with only columns and no doors or side panels. ■ If security is ensured at the server room level, an open rack without doors or side panels is recommended from the perspectives of heat management, cooling, workability, and cost. ■ Due to its welded structure, no assembly is required, and it ensures seismic resistance and robustness. ■ Compliant with EIA standards (compatible with all server and network equipment rack mounts). ■ We offer a variety of options such as cable supports and power strip mounting brackets, allowing for customization according to your needs. ■ The photo shows a size of H2000 × W600 × D1100, but custom sizes are available. (We accept orders from one unit to mass production.)

• Server Rack
• rack
• Racks and Cases

This is a 19-inch split rack designed for housing and colocation service providers. We can accommodate various split rack configurations such as 2-way, 3-way, 4-way, 8-way, 9-way, and 16-way, tailored to your needs. Since the interior of the rack is partitioned, we can provide space for each user (rack mounting is also possible). Of course, not only the space but also the power cables and communication cables are individually protected, preventing wiring issues in advance. Additionally, we offer detailed customization options such as providing space for administrators, individual key and master key specifications, and the choice of under-rack or over-rack cable entry, which has garnered support from many clients, including data center operators, telecommunications carriers, hardware vendors, and construction contractors.

• Server Rack
• rack
• Racks and Cases

The FDF (Fiber Distributing Frame) is a rack that efficiently organizes optical cables, which can often become complicated. Our FDF meets both NEBS standards and NTT Docomo's seismic standards, making it a product with enhanced seismic performance. ◆ High Seismic Resistance By combining special cross-section frames in a composite manner, we have achieved unprecedented seismic performance. It meets NTT Docomo standards R08 to R12 (displacement under 50mm) and NEBS standard Zone 4 (GR-63-CORE, displacement under 75mm). ◆ Focus on Ease of Work The side panels are removable, allowing for easy interconnection between racks, making it simple to consolidate large amounts of optical cables. We pay attention to fine details such as shelf positioning and the size of numbers, ensuring ease of work for our customers down to the millimeter. ◆ Numerous Options We offer a variety of options to enhance work efficiency. By using optional fusion boxes (splice boxes), we can reduce the complexity of tasks during optical cable consolidation.

• Server Rack
• rack
• Racks and Cases

Original compact server rack (19-inch rack) that allows for free size design. It can be customized according to customer requests, not only in size but also in color, internal specifications, and additional options. 【Features of the Compact Rack】 ◆ Perfect for SOHO! Its compact shape fits perfectly in limited spaces such as SOHO. Despite its small size, it achieves the same security level as standard racks. ◆ High versatility and ease of use It can accommodate various custom sizes and colors, including cube shapes. Thanks to its center pier, it meets a wide range of customer needs. ◆ Rich size lineup This highly versatile rack can easily be customized for dustproofing, heat dissipation, and noise reduction. Depending on the space, there are options for storing 19-inch servers vertically instead of horizontally.

• Server Rack
• rack
• Racks and Cases

With the recent spread of ICT, mobile devices such as tablets, smartphones, and laptops are being utilized in various settings including offices, schools, hospitals, and restaurants. When managing these devices collectively rather than individually, it is necessary to implement measures to prevent theft and battery depletion. The solution to these issues is the "charging storage cabinet." The MOBILE RACK from Center Pier is a unit-based system that allows for customizable parts, unlike traditional charging storage cabinets. Even when the types of devices used, the number of units stored, and the charging methods vary by location, the unit-based design allows for the combination of parts according to those needs, enabling flexible responses to different specifications for each project.

• Server Rack

This is a telescopic support angle (rack rail) that can be mounted on a server rack (19-inch rack) regardless of the pitch of the mount angle. Even if the manufacturer of the 19-inch rack is unknown and you are unsure about the shelves or angles that can be attached, or if you purchase a used server that does not come with the original mounting rails or support angles, you can still use this angle for installation. Optional shelves are also available. Additionally, we offer telescopic support angles for weight support and shelves that can be extended, so please feel free to consult with us.

• Server Rack
• rack
• Racks and Cases

■Moving heavy equipment back and forth becomes easier, which is helpful during installation (rack mounting) and maintenance of the equipment. ■By placing the equipment on a shelf for management, it can be pulled out front and back without using server lifts, etc. ■Equipped with a latch (stopper), so the shelf won't protrude when not in use. ■With a handle, it can be easily slid back and forth. ■The load capacity of the product shown in the photo is 200 kg. ■Compliant with EIA standards, it can be mounted on any server rack (19-inch rack) with a height of 2U.

• Server Rack
• rack
• Racks and Cases

This is a storage box that can be rack-mounted in a server rack (19-inch rack). If it has a locking feature, it can also be used as a security measure. It can accommodate requests to store documents, equipment, or PCs inside the rack. It is also possible to provide an entry point, allowing you to store devices that need to be connected to power or network cables.

• Server Rack
• rack
• Racks and Cases

This is a stationary rack designed to house IP devices. It has a height specification of 19 inches, allowing for the vertical storage of 19-inch servers (the photo shows a 3U type). It is a compact stationary rack that offers high versatility, making it easy to customize the internal configuration to fit the equipment, as well as implement dust-proofing and heat dissipation measures. This product was developed in response to requests for a device that can accommodate HUBs, IP devices, and network equipment in office environments where space is limited. Initially, only the sides and back were perforated, but this led to heat buildup. By also perforating the front and expanding the perforated area on all four sides, heat efficiency was improved. The perforated sections are equipped with filters for dust prevention, achieving both heat dissipation and dust-proofing. It allows for the storage and security of devices that are placed directly on the floor or shelves in offices and business locations.

• Server Rack
• rack
• Racks and Cases

This is a product that extends the depth of existing server racks (19-inch racks) when the depth of the newly introduced mount server does not fit or cannot be accommodated. ■ It allows for an expansion of the space to mount equipment such as rack-mounted servers while keeping the existing rack in place. ■ For older server racks (19-inch racks) with low door opening rates, it is possible to convert the doors themselves to high opening rate doors in conjunction with the installation of extended door frames. ■ You can choose from various door types, including acrylic doors, perforated doors, and high opening rate hexagonal perforated doors (up to 82%). ■ Since it allows for the replacement of only the equipment while keeping the existing rack in place, it contributes to reducing costs and time for customers. ■ It is also compatible with server racks from other manufacturers (19-inch racks) (site survey required). ■ We also handle installation and replacement work. Please consult us. ■ There are also examples of manufacturing extension side panel frames that expand space not only in the depth direction but also in the width direction.

• Server Rack
• rack
• Racks and Cases

We were using open racks for server management, but if the need arises to ensure security at the rack level, we can add or install doors with locks. ■ It is possible to add doors while keeping the existing racks in place. ■ We also accommodate server racks from other manufacturers (19-inch racks). ■ The additional frame can be installed with a minimum space of about 5 cm (this depends on the specifications of the rack, so a site survey is required). ■ One concern when installing doors is the potential decrease in exhaust efficiency, but we offer doors with a high opening rate (up to 82%) to minimize obstruction of exhaust. ■ The locks can accommodate not only standard keys but also electronic locks. ■ Since it is possible to add doors while keeping the existing open racks, this contributes to reducing costs and time for our customers. ■ We also handle installation and replacement work. Please feel free to consult with us.

• Server Rack
• rack
• Racks and Cases

To prevent accidents such as "injuring fingertips with the stiff spring of cage nuts" and "cage nuts falling inside the rack during work" at server rack installation sites, we have developed a dedicated tool for attaching and detaching cage nuts. This compact and portable tool reduces strain on the fingertips and has received positive feedback since its launch. We are currently sharing videos on our website and Facebook, so please take a look.

• Server Rack
• rack
• Racks and Cases

This is a rack for server racks (19-inch racks).

• Server Rack
• rack
• Racks and Cases

This is an angle rack rail for server racks (19-inch racks). It can be extended and contracted continuously from 500 to 850 mm. It is an L-shaped angle that can accommodate various dimensions between the mounting rails of different server racks.

• Server Rack

We have a variety of shelves, storage shelves, and cable management trays available.

• Server Rack
• rack
• Racks and Cases

If you are having trouble with wiring and cabling for server racks (19-inch racks), our products can accommodate routing of wires in all directions: front, back, left, right, up, and down.

• Server Rack
• rack
• Racks and Cases

It is installed at the location where heat buildup occurs inside the server rack (19-inch rack) and forcibly expels the heat from devices that cannot be drawn out by the fan at the top of the rack. (The product in the photo is a fan unit.) It is widely used in server racks, 19-inch racks, system racks, network racks, and more.

• Server Rack
• rack
• Racks and Cases

To prevent major accidents, we will prevent power supply to various parts around the server rack (19-inch rack).

• Server Rack
• rack
• Racks and Cases

Please feel free to consult us about your desired installation location, size, and material. We will manufacture it according to your specified size.

• Server Rack
• rack
• Racks and Cases

Please feel free to consult us about your desired installation location, size, and material. We will manufacture it to your specified size.

• Server Rack
• rack
• Racks and Cases

- Extended door frame (depth extension for 19-inch rack) - Additional door installation (ensuring security for open racks)

• Server Rack
• rack
• Racks and Cases

This is a drawer-type slide box that can be rack-mounted in a server rack (19-inch rack). If it has a lockable feature, it can also be used as a security measure box.

• Server Rack
• rack
• Racks and Cases

Since we respond to our customers' concerns each time and create products accordingly, we have over 300 types of production achievements, including products not listed here. We accommodate various requests regarding size, input, and output.

• rack
• Racks and Cases

Since we respond to customer issues each time and create products accordingly, we have over 300 types of production results, including products not listed here. We can accommodate various requests regarding size, input, and output.

• rack
• Racks and Cases

This is a key-locked server rack (19-inch rack) compliant with EIA standards that allows you to store rack-mounted servers vertically, enabling them to be treated like tower servers. Placing them directly on the floor or desk takes up space and raises security concerns... In such cases, the "Tower Mount Box" is a product that allows for slim and secure storage of rack-mounted servers. 【Features】 - Neatly stores rack-mounted servers. - Designed in compliance with EIA standards. - Safely manages the server itself and internal data. *For more details, please request materials or view the PDF data from the download.

• Server Rack

- The depth dimension can be adjusted from 430mm to 730mm in 25mm increments. It can be changed to the desired depth in about 5 minutes with screw fixation. - Maximum load capacity: approximately 300kg It can accommodate heavy servers and other equipment. - Easy assembly! Assembly can be completed in about 10 minutes. We can also assemble and deliver it for you. - Abundant options With extendable support angles and extendable fixed shelves, selecting optional items is hassle-free. Installation of casters is also possible.

• Other PCs and OA equipment

■ Added pull-button locking feature to IEC C13⇔C14 power cable This is effective in preventing the C13 plug from being disconnected. It allows for disconnection prevention without the need for installation work such as cable clamps. ■ Compatible with various devices' power supply There are no restrictions from the manufacturer on the device side (C14 outlet side), so it is compatible with the power supply of various devices such as servers, computers, and PDUs.

• cable
• Other cable related products

Attention administrators struggling with freezes! A reliable ally that automatically reboots remotely has been born! ■ For locations that are difficult for people to access, such as remote areas or high places ■ Equipped with PORT monitoring function ■ System management possible anytime, anywhere with smartphones and tablets ■ Customizable according to your needs Amazing high specifications! ● Network operation monitoring ● Freeze monitoring via PING and ports ● Status notifications and freeze detection via email ● Remote power control through communication ● Weekly scheduling function

• Server monitoring and network management tools

This is a mounting bracket for installing an LCD monitor on a server rack (19-inch rack). By attaching a monitor arm compatible with the VESA standard, any monitor can be installed, and adjustments for height and angle are also possible.

• Other PCs and OA equipment

By blocking the dead space (gaps) in the server rack (19-inch rack) with a heat guard, it prevents the hot air (hot aisle) expelled from the back of the equipment from circulating to the front intake side (cold aisle), thus avoiding the hot aisle reverse phenomenon. This product is referred to as a "heat shutter" by other companies. ■ Product Features - The heat guard section uses a rubber plate, allowing for flexible cabling between the front and rear sides. - It can be retrofitted to existing LK series racks that are already installed, depending on the installation conditions. - It has a separate design for left/right and up/down, which enhances maintainability.

• Other PCs and OA equipment
• Server Rack
• rack

■Up to 20 smartphones or tablets can be stored simultaneously. Devices with external dimensions within 20mm × 123mm × 210mm can be accommodated. ■Stacking and linking are possible in both vertical and horizontal directions. The structure allows for stacking and linking to accommodate an increase in devices in the future. The maximum storage capacity can be easily adjusted according to the usage scenario. ■You can choose whether or not to have doors based on your usage scenario. Since the operational methods for security vary depending on the location of use, the presence of doors can be selected. In places where security is a concern, doors can be installed, while in scenarios where usability is prioritized, doors can be omitted to adapt to various purposes. ■Equipped with cable management clamps. To organize the messy cable wiring during operation, wiring clamps are standard equipment. The storage space and cable space are separated, allowing for a neat appearance. ■The security wire prevents theft. The back of the box has mounting holes for a security wire, making it possible to prevent theft of the box itself (security wire is not included).

• Other PCs and OA equipment

This is a server rack depth adjustment bracket (U-shaped metal fitting) for mounting EIA standard 19-inch equipment in a front position compared to conventional mount rails (mount angles). It prevents equipment and cables from interfering with the door. You can specify the U size, offset length, and more, and it can be custom-made from a single set. We have over 60 types of production achievements to date. ■ We have production achievements for U sizes ranging from 1U to 6U. Of course, we can also produce items with a larger U size. ■ The offset length can be specified in millimeters, from 30mm to longer lengths such as 200mm. ■ The hole shape can be selected from options such as square holes for cage nuts or M5 screws.

• Other PCs and OA equipment

This is a bracket that converts IS standard mounting rails to EIA standard. It is an adjustment bracket (U-shaped bracket) for mounting EIA standard equipment onto JIS standard mounting rails (mounting angles). You can specify the U number, offset length, and it can be custom-made starting from one set.

• Other PCs and OA equipment

This is a bracket that converts and adjusts the mounting pitch when the mounting width of the equipment differs. It is designed to adjust and convert the mounting pitch of equipment according to different standards such as JIS, EIA, and ETSI. It can be manufactured for each U size, so please consult us regarding the dimensions.

• Other PCs and OA equipment
• Server Rack
• rack

■ Equipped with a Qi standard compatible wireless charger with ease of use in mind ■ Slide-type design for easy insertion and removal of devices ■ Slide-type design for easy insertion and removal of devices ■ Charging status can be easily checked at a glance

• Server Rack
• rack
• Racks and Cases

Next-generation EIA 19-inch server rack that simultaneously pursues seismic performance and workability! It meets the standards for both NTT Docomo's artificial seismic waves and NEBS standard Zone 4 test waves, demonstrating the industry's highest level of seismic performance! ■ Industry's highest level of seismic performance! (NTT Docomo standard / NEBS standard) * Robustness capable of withstanding maximum acceleration of approximately 1600 gal * High capacity with a seismic load of up to 1200 kg * "4-post" type with fewer support pillars * Removable slide side panels even after installation * Design that pays attention to detail

• Server Rack
• rack
• Racks and Cases

*Effective use of installation space Are you having trouble finding space on the floor to install a 19-inch rack? You can utilize space effectively by mounting a 19-inch rack on the walls of your server room or office (it can also be installed on the floor). *Please be careful not to exceed a load of 30 kg when installing on the wall. *Improvement in security The doors are equipped with locks, and the side panels and top covers use tamper-proof screws. *Effective use of space between the mount rails and side panels Special brackets are provided to allow equipment to be mounted between the mount rails and side panels. *Support for overhead wiring An opening is provided in the top panel to accommodate overhead wiring. We also accept installation and construction requests. Please feel free to contact us.

• Server Rack
• rack
• Racks and Cases

*Effective use of installation space By equipping the server rack (19-inch rack) with a "sliding base," the entire rack can be slid forward. It slides 375mm forward from its fixed position. *Workability at the back of the rack When the rack is installed against a wall, is it difficult to work on the back side of the rack after it is set up? Since the rack can be slid forward, it creates a workspace at the back. About 350mm of space is created at the back, allowing workers to maneuver around and perform tasks. *Support for under-rack wiring An opening is provided at the bottom to accommodate under-rack wiring. Even when the base slides, the openings of the fixed base and the sliding base overlap, ensuring a clear path for wiring.

• Server Rack
• rack
• Racks and Cases

Disaster emergency power supply "FECORAGE Cart" featuring a safe lithium-ion battery with iron oxide ■Differences from previous portable disaster power supplies… Previous portable disaster power supplies were designed for use in emergencies, which meant they were mostly stored in warehouses during normal times. As a result, they often cannot be used immediately in emergencies because they are not charged. ■Simultaneous charging capability For tablets, it can charge up to 40 devices simultaneously. Each set can charge a maximum of 20 devices at the same time. By charging from the battery system built into the FECORAGE Cart, it can be used even in places without AC power or during power outages! In school education settings, break time equals charging time, leading to a sudden increase in power consumption during breaks. This can result in higher electricity contract costs. The FECORAGE Cart helps reduce electricity costs by charging its built-in battery during cheaper nighttime electricity rates. In the event of a disaster, AC power can be accessed from the service outlet on the FECORAGE Cart (up to 400W).

• rack
• Secondary Cells/Batteries
• Power Supplies

● This is a telescopic shelf that can be installed on a server rack (19-inch rack) regardless of the pitch of the mount angle. ● It is designed to hook onto the cage holes at the back and be secured with screws only at the front, allowing for installation with front-side work only. ● There is no need to go around to the back of the 19-inch rack when installing the shelf, which reduces the burden of work. ● The pitch of the mount angle can range from 530 to 800 mm, and it can support a load of up to 30 kg. In addition, we offer a wide range of products, including lightweight thin shelves and slide shelves for heavy equipment with a load capacity of 200 kg, so please feel free to consult us.

• Server Rack