東興産業 List of Products and Services

V Sponge (Release Agent Wiping Sponge) is used for wiping off release agents and for product repairs. Compared to blowing off the release agent with air, it allows for quicker wiping tasks. <Features> - It can easily wipe hard-to-reach narrow areas that are difficult to clean with rags or mops. - After absorbing, wringing it out restores its oil-absorbing capacity, allowing for repeated use. - Toko's V Sponge has optimal hardness for oil absorption and durability. - Custom orders (size, hardness) are also available.

• Other consumables
• Wes
• mop

As part of the product, "spacers," which are often used in concrete structures, are important components for maintaining the durability and strength of the product. Therefore, it is necessary to carefully select the shape, weight, and material that match the design size. "Do you have any of these concerns?" ■ The specifications don't match, and it's hard to remove the cover... ■ I want to prevent discoloration during the storage of concrete products... ■ There are no products with good workability... ■ Seeking load-bearing capacity increases costs... and more. We can offer over 3,000 total specifications for each spacer product! Please consult Toko Sangyo, which manufactures, develops, and sells plastic molded products, including spacers. *If you would like to see the products we handle, please download the PDF or feel free to contact us.

• others

At Toko Industry, we are seeking your requests such as, "We are having trouble with this in manufacturing sites, civil engineering, and construction sites..." or "We want this kind of plastic molded products and parts!" We are a manufacturer of plastic molded products, including spacers for concrete secondary products, corner guards, and level plates. With our technical expertise and know-how, we may be able to turn your ideas into reality! 【Our Features】 ■ We can offer over 3,000 different specifications for each spacer product! ■ We hold numerous patented products for spacers. ■ We have connections in the industry with both manufacturing capabilities and trading functions, etc. Please feel free to apply through our "Contact Form." *If you would like to see the products we handle, please download the PDF or feel free to apply.

• others

The "12-2BW" is a rainwater absorption material used inside the deha cup, made from highly absorbent non-woven fabric. It eliminates the freezing of rainwater that accumulates in the cup, preventing rust, mold, and algae growth on the deha pin. Additionally, it is low-cost and easy to install, and since it does not contain chlorine, dioxins are not produced even when incinerated. 【Features】 ■ Made from highly absorbent non-woven fabric ■ Eliminates the freezing of rainwater that accumulates in the cup ■ Prevents rust, mold, and algae growth on the deha pin ■ Low-cost and easy to install ■ Does not contain chlorine, so dioxins are not produced even when incinerated ■ Raw materials (by-product raw materials): polyethylene, terephthalate, polypropylene, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "non-woven fabric rope" is widely used for materials such as stone and flue pipes, and is a cushioning material improved for concrete secondary products based on "cellophane rope." There are no issues with wood extract when using wooden support beams. It is less slippery compared to conventional products, and adhesion to the product has been improved. Furthermore, it can be easily cut to the required length, is convenient to carry, and the cut ends do not separate due to thermal welding. 【Features】 ■ No issues with wood extract when using wooden support beams ■ Less slippery compared to conventional products, and improved adhesion to the product (Type 13-3C, 10-3B) ■ Easy to cut to the required length and convenient to carry ■ Cut ends do not separate due to thermal welding ■ Type C: Stiffer twist, suitable for cushioning during stacking ■ Type B: Elastic, making tightening during bundling easy *For more details, please refer to the PDF document or feel free to contact us.

• Cushioning material

The "One-Touch Spacer Cap Type" is a product handled by Toko Sangyo Co., Ltd., a comprehensive trading company specializing in the development and manufacturing of plastic spacers. By embedding a resin cap into the mortar spacer, it has become easier to fit rebar. Our company is committed to contributing to the product development and cost reduction of our customers through the creation of higher value-added products in the future. 【Features】 ■ Made it easier to fit rebar by embedding a resin cap into the mortar spacer ■ Made to order, with a delivery time of 2 weeks *For more details, please refer to the PDF materials or feel free to contact us.

• others

"Plastic square timber" is a resin-made lumber using recycled materials handled by Toko Sangyo. We offer a lineup including "corrugated plastic sheets" and "plastic square timber," which can be cut to required L dimensions (from 1000 to 2000 mm) as needed. Our company is committed to contributing to the product development and cost reduction of our customers through the creation of higher value-added products in the future. 【Product Lineup】 ■ Corrugated plastic sheets ■ Plastic square timber ■ Plastic square timber (dice) *For more details, please refer to the PDF materials or feel free to contact us.

• others

"Span Plate F (Flat)" is a product suitable for storing concrete products in a stockyard. There are no issues with resin that can occur when using wooden supports. Additionally, the installation area is reduced, and discoloration is minimized. Furthermore, since it is white, it does not retain color even when rubbed. [Features] - No issues with resin when using wooden supports - Reduced installation area and minimized discoloration - White color prevents color transfer when rubbed *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Green Lami Sheet" is a new material developed in collaboration with a sheet manufacturer, featuring a high heat-resistant vapor protective sheet. It is made of a special cross fabric (flat yarn) that is laminated, making it a thin sheet that is resistant to tearing. Additionally, its high waterproofing properties help retain heat, and it excels in insulation. It also has UV-cut specifications, making it strong against ultraviolet rays, and it is less prone to deterioration even when used outdoors. We also offer a "Green Lami W (double type)" for enhanced insulation and repair tape in case the sheet gets torn. 【Features】 ■ High heat resistance and waterproof performance ■ Ultra-lightweight and strong ■ UV-cut specifications for strong resistance to ultraviolet rays ■ Excellent weather resistance, making it less prone to deterioration even when used outdoors ■ The surface is a bright emerald green, brightening up the factory environment ■ Does not emit toxic gases when incinerated *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Oil Sprayer Nozzle 2" is a product compatible with both water-based and oil-based substances. It significantly reduces the amount of release agent used. You can choose the length of the pole and the type of nozzle. The poles are available in actual lengths of 300, 480, 750, and 1050 millimeters, and the nozzle sizes include extra large, large, small, and extra small. First, please measure the current spray volume per minute, and if it is 300cc or more, we highly recommend using the Toko Oil Sprayer Nozzle 2. 【Features】 ■ Significant reduction in the amount of release agent used ■ Compatible with both water-based and oil-based substances ■ Options for pole length and nozzle type *For more details, please refer to the PDF materials or feel free to contact us.

• nozzle
• spray

The "Large Product Spacer" is a product handled by Toko Sangyo Co., Ltd., a general trading company specializing in the development and manufacturing of plastic spacers and materials. The "SC Spacer" is available in sizes 40 to 70 (D10, D13, D16). We also offer long caps. We are committed to contributing to our customers' product development and cost reduction through the creation of higher value-added products in the future. 【Features (SC Spacer)】 ■ Spacer considering salt damage and housing construction certification ■ Sizes 40 to 70 (D10, D13, D16) *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Corner Guard" primarily reduces the effort and time required for repairs by preventing chipping of concrete products. Since there is no need for the lift operator to arrange the corner materials during storage, work efficiency is improved. By forming an L-shape, it can protect two sides simultaneously, both vertically and horizontally. The double-sided tape for fixing is only on one side, so there will be no tape marks on the exposed part of the product. 【Features】 ■ Prevents chipping and eliminates the need for repairs ■ Reusable by replacing the tape ■ Can protect two sides simultaneously *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Cushioning material

The 'Construction Wedge' is suitable for leveling gutters and blocks. It is made of impact-resistant resin. It has a design that prevents slipping and is resistant to breaking. 【Features】 ■ For leveling gutters, blocks, etc. ■ Made of impact-resistant resin ■ Designed to prevent slipping and resist breaking *For more details, please refer to the catalog. Feel free to contact us.

• others

The "Level Plate Type A" is a leveling adjustment plate that maintains its thickness and height even when stacked multiple layers without shifting. It is easy to set up due to its sloped edges. Made from impact-resistant resin, it is ideal for leveling adjustments during concrete product installation. 【Features】 ■ Ideal for leveling adjustments during concrete product installation ■ Maintains height without shifting even when stacked ■ Can be inserted into rebar or bolts ■ Easy to set up due to sloped edges *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• others

The "Level Plate Type B" is ideal for leveling adjustments during the installation of concrete products such as drainage ditches and L-shaped retaining walls. The "slip prevention" feature in the center of the plate fits perfectly, minimizing play and ensuring that the surfaces of the product and the plate align accurately. We offer a wide range of products, from heavy-duty to lightweight, with seven thickness variations available for each plate size. 【Features】 ■ Ideal for leveling adjustments during the installation of concrete products ■ No shifting when stacked, maintaining consistent plate thickness ■ A rich lineup of plate sizes ■ Seven thickness variations available for each size *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• others

The "Level Plate" is ideal for leveling during the installation of concrete products such as drainage ditches and L-shaped retaining walls. Since it does not shift when stacked, the thickness of the plates remains unchanged, allowing for precise height determination. We offer a wide range of products, from heavy-duty to lightweight, with seven thickness variations available for each plate size. 【Features】 ■ Ideal for leveling during the installation of concrete products ■ No change in plate thickness when stacked ■ A rich lineup of plate sizes ■ Seven thickness variations available for each size *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• others

The "MH Spacer" is a spacer designed for large concrete products, ideal for the bottom cover of large products such as L-shaped retaining walls and box culverts. It efficiently accommodates two types of rebar with diameters D10-D13, D16-D19, and D22-D25 with just one piece. It is designed to ensure that exposure occurs only at points. 【Features】 ■ Ideal for large products ■ Efficient ■ Abundant lineup *For more details, please contact us or download the catalog.

• others