フォレスト List of Products and Services

The "FPM-1/FZM-1 series" is a single-phase power controller equipped with a soft start function as standard. This product is capable of phase control and zero-cross control, and can accommodate various heater control needs, including alarm functions and protection features. 【Features】 ■ Supports constant voltage, constant current, and constant power ■ Current capacity ranges from 20 to 300A ■ Comes standard with fast-blow fuses *For more details, please refer to the catalog or feel free to contact us.

• power supply

The "FAL-21-3" is a three-phase heater fault detector that can be used regardless of the waveform, including phase control, ON-OFF control, and zero-cross control. The detection point can be set arbitrarily using the dial scale, and when the detection point is reached, the indicator lamp lights up and outputs a signal. 【Features】 ■ Detection of a single heater disconnection in parallel heaters ■ RoHS compliant ■ Can be mounted on a DIN rail ■ One unit is sufficient for three-phase circuits *For more details, please refer to the catalog or feel free to contact us.

• Other electronic components and modules
• Other tools and equipment

The "FAL-21-1" is a single-phase heater failure detector designed for panel mounting, capable of monitoring multiple heaters with a setting accuracy of ±3% and phase control support. The detection points can be set arbitrarily using the dial scale, and when the detection point is reached, the display lamp lights up and an output signal is generated. 【Features】 ■ Detection of a single heater disconnection in parallel heaters ■ RoHS compliant ■ DIN rail mountable *For more details, please refer to the catalog or feel free to contact us.

• Other electronic components and modules
• Other tools and equipment

The "FAL-100-3" is a heater disconnection alarm that supports phase control and can monitor multiple heaters. With the incorporation of a microcontroller, it allows for automatic load setting and simplifies operation. There are two types available: the "FAL-100-3P" for phase control and the "FAL-100-3Z" for zero-cross SSR control, allowing you to choose according to your application. 【Features】 ■ RoHS compliant ■ Automatic load setting by microcontroller ■ Digital alarm setting ■ Panel-mounted type with plug-in method ■ Simplified setting and handling *For more details, please refer to the catalog or feel free to contact us.

• Other electronic components and modules
• Other tools and equipment

The "FAL-100-1" is a single-phase alarm device that supports phase control and can monitor multiple heaters. It allows for automatic load setting through microcontroller processing, simplifying operation. Additionally, it can be used in combination with external capacitors and transformers when exceeding heater capacity. 【Features】 ■ Supports phase control loads ■ RoHS compliant ■ Digital alarm setting ■ Panel-mounted type with plug-in method ■ Simplified setting and handling *For more details, please refer to the catalog or feel free to contact us.

• Other electronic components and modules
• Other tools and equipment

The "FAH-510 series" is a direct current integrator ammeter that supports a current setting range of 1A to 36,000A and is compatible with a wide range of direct current. It has an analog output function (optional) for monitoring the measured current or integrated current amount. 【Features】 ■ RoHS compliant ■ Analog output function available (optional) ■ Auto-reset function included ■ Current setting value ranges from 1A to 36,000A *For more details, please refer to the catalog or feel free to contact us.

• Other measurement and measuring equipment

The "FPG-3 Series" is a three-phase power regulator with a phase control method that comes standard with a soft start function to suppress large inrush currents when the power is turned on. Optional features such as fast-blow fuses, disconnection alarms, and automatic/manual switching slope settings can be added according to the application. Additionally, it is possible to easily check the status of the unit at a glance with power indicator lamps, reverse phase detection lamps, system abnormality lamps, and fuse disconnection lamps (optional). 【Features】 ■ RoHS compliant ■ Slim body allows for compact control panels ■ Abundant optional features ■ Soft start function included as standard ■ Status display that is easy to understand at a glance *For more details, please refer to the catalog or feel free to contact us.

• power supply

The "FPH-3 series" is a three-phase power controller that achieves high mounting density and low cost through miniaturization. It has been compacted to a width of 152-156 mm for models with a maximum load current of 20-50A, and 190 mm for models with 70A-200A. Additionally, it comes standard with features such as a RUN-STOP function that can also be used for emergency stops, a soft start function (variable from approximately 1 to 10 seconds), and a reverse phase detection function. 【Features】 ■ RoHS compliant ■ Economical type ■ Compact design ■ Rich standard features ■ Alarm status monitor (LED lamp) included *For more details, please refer to the catalog or feel free to contact us.

• power supply

The "FPZ Series" is a single-phase power regulator with independent power supply and load power supply, eliminating the need for phase matching and preventing miswiring. The power supply uses a free power method with automatic frequency selection. Additionally, load abnormalities and load rate conditions can be monitored on the unit's surface. Standard features include SCR alarm function, soft start function, and H/L control, allowing for easy settings on the unit's surface. 【Features】 ■ No miswiring due to independent power supply and load power supply ■ Free power method ■ Load abnormalities can be monitored on the unit's surface ■ SCR alarm function is standard ■ Supports switching between phase control and zero-cross control *For more details, please refer to the catalog or feel free to contact us.

• power supply

The "FPG-1 Series" is a single-phase power controller that achieves even lower prices than our conventional thyristors, allowing for cost reduction in control panels through phase control methods. It comes standard with a soft start function that suppresses large inrush currents when the power is turned on. Features such as fast-blow fuses, fuse breakage alarms, automatic/manual switching, and slope settings can be added according to the application. 【Features】 ■ RoHS compliant ■ Slim body ■ Low price ■ Soft start standard equipped ■ Abundant optional features *For more details, please refer to the catalog or feel free to contact us.

• power supply

The "FPM-1/FZM-1 series" is a single-phase power controller equipped with a soft start function as standard. This product supports various heater control options, including phase control and zero-cross control, as well as alarm and protection functions. For more details, please refer to the catalog or feel free to contact us.

• power supply
• Other power sources
• power supply

The "FPG-1 Series" achieves even lower prices than our conventional thyristors and is a single-phase power controller using phase control that can reduce the cost of control panels. It comes standard with a soft start function that suppresses large inrush currents when the power is turned on. Features such as fast-blow fuses, fuse break alarms, automatic/manual switching, and slope settings can be added according to the application. 【Features】 ■ RoHS compliant ■ Slim body ■ Low price ■ Standard soft start function ■ Abundant optional features For more details, please refer to the catalog or feel free to contact us.

• power supply
• Other power sources
• power supply

The "FPZ Series" is a single-phase power controller that operates independently of the power supply and load power supply, eliminating the need for phase matching and preventing miswiring. The power supply uses a free power method with automatic frequency selection, and load abnormalities and load rate conditions can be monitored on the unit's surface. It comes standard with SCR alarm functionality, soft start functionality, and H/L control, making it easy to set up directly on the unit's surface. 【Features】 ■ Independent power supply and load power supply to prevent miswiring ■ Free power method ■ Ability to monitor load abnormalities on the unit's surface ■ Standard SCR alarm functionality ■ Switchable phase control/zero-cross control For more details, please refer to the catalog or feel free to contact us.

• power supply
• Other power sources
• power supply

The "FPG-3 Series" is a three-phase thyristor power supply equipped with a soft start function that suppresses large inrush currents at power-on. Optional features such as fast-blow fuses, disconnection alarms, and automatic/manual switching slope settings can be added according to the application. Additionally, the power indicator lamp, reverse phase detection lamp, system abnormality lamp, and fuse disconnection lamp (optional) allow for easy monitoring of the unit's status at a glance. 【Features】 ■ RoHS compliant ■ Slim body enables compact control panels ■ Abundant optional features ■ Soft start function standard ■ Status display for easy visibility For more details, please refer to the catalog or feel free to contact us.

• power supply
• Other power sources
• power supply

The "FPH-3 series" is a three-phase power controller that achieves high mounting density and low cost through miniaturization. It has achieved compactness with a width of 152-156 mm for models with a maximum load current of 20-50A, and 190 mm for models with 70A-200A. Additionally, it features a RUN-STOP function that can also be used for emergency stop, as well as a soft start function (approximately adjustable from 1 to 10) and reverse phase detection function as standard equipment. 【Features】 ■ RoHS compliant ■ Economical type ■ Compact design ■ Rich standard features ■ Alarm state monitor (LED lamp) included For more details, please refer to the catalog or feel free to contact us.

• power supply
• Other power sources
• power supply

The DC integrated current meter "FAH-510 Series" is a current meter that supports a current setting range of 1A to 36,000A, accommodating a wide range of DC currents. It has an analog output function (optional) for monitoring the measured current or integrated current amount. 【Features】 ■ RoHS compliant ■ Analog output function available (optional) ■ Auto reset function included ■ Current setting value ranges from 1A to 36,000A For more details, please refer to the catalog or feel free to contact us.

• Other process controls
• Ammeter

The heater disconnection alarm device "FAL-100-3P/Z <for three-phase>" is a product that can monitor multiple heaters, compatible with phase control. With the incorporation of a microcontroller, automatic load setting is possible, achieving simplification of operation. 【Features】 ■ RoHS compliant ■ Automatic load setting by microcontroller ■ Digital alarm setting ■ Panel-mounted type with plug-in method ■ Simplified setting and handling For more details, please refer to the catalog or feel free to contact us.

• Other process controls

The heater disconnection alarm device "FAL-100-1 <for single-phase>" is a product that can monitor multiple heaters, compatible with phase control. It allows for automatic load setting through microcontroller processing, achieving simplification of operation. 【Features】 ■ Compatible with phase control loads ■ RoHS compliant ■ Digital alarm setting ■ Panel-mounted type with plug-in method ■ Simplified setting and handling For more details, please refer to the catalog or feel free to contact us.

• Other process controls

The "FAL-21-3 <for three-phase>" is a panel-mounted type that can be used regardless of waveform for phase control, ON-OFF control, zero-cross control, etc. The detection point can be set arbitrarily using the dial scale, and when the detection point is reached, the indicator lamp lights up and outputs a signal. 【Features】 ■ Detection of a single heater disconnection in parallel heaters ■ RoHS compliant ■ Can be mounted on a DIN rail ■ One unit is sufficient for three-phase circuits For more details, please refer to the catalog or feel free to contact us.

• Other process controls

The "FAL-21-1 <for single-phase>" is a panel-mounted type that allows monitoring of multiple heaters with a setting accuracy of ±3% and supports phase control. The detection points can be set arbitrarily using the dial scale, and when the detection point is reached, the display lamp lights up and outputs a signal. 【Features】 ■ Detection of a single heater disconnection in parallel heaters ■ RoHS compliant ■ DIN rail mountable For more details, please refer to the catalog or feel free to contact us.

• Other process controls

■Features - Usable regardless of waveform, including phase control, ON-OFF control, zero-cross control, etc. - Detection of a single heater disconnection in parallel heaters - Detection points can be set arbitrarily using dial scales - When the detection point is reached, the indicator lamp lights up and outputs a signal - One unit is sufficient for three-phase circuits

• Other process controls