昌和興産 List of Products and Services

Installation and removal of Nifuratchi, push rivets, push-turn rivets, and push-pull rivets.

• fastener

This is a hole plug used for "sealing drain holes in automotive trunk rooms" and "sealing holes for seat belts inside the vehicle." The sizes range from 1.0 to 2.0 increments. It is a standard stock item, so it is available for immediate delivery.

• Vehicle body parts

This is a gasket that is always necessary when changing automobile engine oil. Available from various manufacturers! Always in stock! Immediate delivery is possible!

• Fuel system parts
• Engine parts
• Other Auto Parts

【 Features 】 - Low cost - Recommended for home appliances/OA equipment - Simple installation method

• Printer
• Notebook PC
• Other PCs and OA equipment

A damper utilizing the shear resistance of silicone oil. No angle restrictions for use. It is used in combination with a rack and pinion.

• Cabinets and Boxes
• Other inspection equipment and devices
• Other PCs and OA equipment

One-touch legs for machines and equipment, made of resin foot components that serve as cushioning parts. Due to its two-part structure consisting of the main body and pin section, it can be easily attached from one direction. In addition to its role as a leg, it also functions as a cushioning feature at impact-absorbing points. ■ Many standards available ■ Early response possible ■ Easy operation

• Interior parts
• Printer
• Other FA equipment

A resin latch for locking doors, furniture, appliances, and equipment. It allows for the opening and closing of doors without the need for knobs on the outside. Since the shape of knobs is unnecessary, it can be set up without disrupting the cabinet design. By combining it with a damper, it is also possible to enhance the sense of luxury. When the door is open, pushing on the outside will lock it, and pushing from the outside will unlock it from the locked state. ■ Many compatible standards available ■ Early response possible ■ Easy operation

• Interior parts
• Printer
• Other machine elements

A resin grommet for mounting panels using screw tightening. Screws can be attached from one side. The holding power after installation is very high, and there is no wobbling. The flange part can be utilized as a spacer. ■ A wide range of compatible standards available ■ Quick response possible ■ Easy operation

• Electrical equipment parts
• Interior parts
• nut

Resin clips for attaching trim boards to panels. These are hidden clip types, so the clip heads do not protrude from the surface of the trim board. They are ideal for items where you do not want clips to be visible on the surface. ■ A wide variety of compatible standards available ■ Quick response possible ■ Easy to work with

• Vehicle body parts
• Interior parts
• Other Auto Parts

A resin clip for bundling cables and attaching to panels. The clip is a one-piece strap. It secures to the panel with the clip part and bundles cables with the strap part. The bundling and removal of the strap part can be repeated. ■ Many standards available ■ Quick response possible ■ Easy operation

• Electrical equipment parts
• Wiring materials
• Other cable related products

Resin clips for bundling wires and cables. They can be easily bundled and securely fixed. They can also be reused multiple times. ■ A wide variety of compatible standards available ■ Quick response possible ■ Easy operation

• Electrical equipment parts
• Wiring materials
• fastener

Clip for securing wires. Wires can be secured with a single touch. ■ Many standards available ■ Quick response possible ■ Easy operation

• Wiring materials
• Other Auto Parts
• Other cable related products

Resin clips for bundling cables. They can be securely fixed with one touch, making it easy to bundle cables. ■ A wide variety of compatible standards available ■ Quick response possible ■ Easy operation

• Electrical equipment parts
• Other electronic parts
• Other cable related products

A resin holder for attaching rods (pipes). It can be easily fixed by inserting it into the hole with a single touch and simply clamping the rod. There are also types that allow you to clamp the rod first and then secure it. ■ A wide variety of compatible standards available ■ Quick response possible ■ Easy operation

• Engine parts
• Other cable related products
• fastener

Clip for attaching panels. It has a high removal force against the attachment force, allowing for easy installation in one motion. It is suitable for applications where removal is not required. ■ A wide range of compatible standards available ■ Early response possible ■ Easy operation

• Interior parts
• fastener
• bolt

Clip for attaching panels. It is compatible with small diameter holes and can be installed in one motion. It is suitable for light loads and applications where removal is not required. ■ A wide variety of standards available ■ Quick response possible ■ Easy operation

• Interior parts
• fastener
• Other energy equipment

Clip for attaching panels. It can be installed in one motion, which reduces labor time. It has a wide tolerance for board thickness and can be used for various applications. ■ Many standards available ■ Quick response possible ■ Easy operation

• Interior parts
• Other energy equipment
• bolt

Resin rivets for panel installation. Fastening is possible by simply pushing in the pin. There are also detachable types suitable for applications that do not require removal. Compatible with small diameter holes. ■ Many standards available ■ Quick response possible ■ Easy operation

• Vehicle body parts
• fastener
• furniture

Resin rivets for attaching panels. Installation is complete by simply pushing in the pin, and removal is done with a flathead screwdriver. It has high extraction strength and does not wobble when installed. Ideal for tight spaces. ■ Many standards available ■ Quick response possible ■ Easy operation

• Interior parts
• Other machine tools
• fastener

Resin rivets for panel installation. Turning the pin 90° releases the fastening. It has high extraction force and does not wobble when installed. The installation operation requires two actions. ■ A wide variety of compatible standards available ■ Early response possible ■ Easy operation

• Interior parts
• fastener
• Other safety equipment

Consists of two parts: a pin and a grommet. The pin does not detach from the grommet, preventing loss of the pin. Ideal for securing panels that need to be removed repeatedly. There are three types of pin head shapes depending on the application. 【Features】 ■ A wide range of compatible standards available ■ Quick response possible ■ Easy to work with ■ Reusable *For more details, please refer to the catalog or feel free to contact us.

• Filtration Equipment
• Distribution Board
• Engine parts

"Nifco Push-Pull Rivets" make it extremely easy to attach and detach panels. There is no wobbling, and when the pin is pulled up from the installed state, the fixation is released, allowing for removal. They have high extraction force and are suitable for high-load applications. 【Features】 ■ A wide variety of standards available ■ Quick response possible ■ Easy operation ■ Reusable *For more details, please refer to the catalog or feel free to contact us.

• Other Auto Parts
• Other machine tools
• Other consumables

"Nifco Push Rivet" is a resin rivet that is ideal for securing panels. It does not wobble when installed, and no tools are required during installation. By pushing the pin further from the fixed state, the fixation is released, allowing for removal. The installation process consists of two actions and has a high extraction force. 【Features】 ■ Extremely easy to attach and detach panels ■ No wobbling when installed, and no tools are needed during installation ■ Pushing the pin further from the fixed state releases the fixation *For more details, please request documentation or view the PDF data available for download.

• Other Auto Parts
• Other machine tools
• Other consumables