ANSeeN List of Products and Services

We would like to introduce the "AC Coupled Amplifier" handled by ANSeeN Corporation. The model number is AMP02 (previous model number AMP-BNC-02), and its application is radiation measurement. The high-voltage signal path has a withstand voltage of 500Vdc, 0.1mVac, and a gain of 10,000 times, while the low-voltage signal path has a withstand voltage of 2Vdc, 1Vac, and a gain of 1 time. The rise time is 5ns at 0pF. 【Overview (partial)】 ■ Model number: AMP02 (previous model number AMP-BNC-02) ■ Application: Radiation measurement ■ Main specifications ・ High-voltage signal path: 500Vdc withstand voltage, 0.1mVac, gain of 10,000 times ・ Low-voltage signal path: 2Vdc withstand voltage, 1Vac, gain of 1 time ・ Rise time: 5ns at 0pF *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "Preamp for Semiconductor Detectors" handled by ANSeeN Co., Ltd. The model number is CSP-BNC-01, and it is intended for low leakage current and low capacitance detectors such as CdTe detectors. The specifications include noise of 3.0 keV FWHM@0pF and 5.0 keV FWHM@100pF with CdTe. Please feel free to contact us if you have any inquiries. 【Overview (Partial)】 ■Model Number: CSP-BNC-01 ■Application: For low leakage current and low capacitance detectors such as CdTe detectors ■Main Specifications: Noise 3.0 keV FWHM@0pF, 5.0 keV FWHM@100pF with CdTe *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "TTL Signal Isolator" handled by ANSeeN Co., Ltd. The model number is TTLISO-BNC-01, and it is used for isolating high-speed TTL signals. The compatible pulse width is 90ns or more, and it is powered from the signal output side. Please feel free to consult us when you need assistance. 【Overview】 ■ Model Number: TTLISO-BNC-01 ■ Purpose: Isolation of high-speed TTL signals ■ Main Specifications ・ Compatible pulse width: 90ns or more ・ Powered from the signal output side *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "SHV Connector Split Box (1:2)" handled by ANSeeN Co., Ltd. The model number is CBX02, and its purpose is to split SHV cables (1:2) as an alternative to T-shaped connectors. It features specifications of 3 SHV connectors (jacks). Please feel free to consult us when you need assistance. 【Overview (Partial)】 ■ Model Number: CBX02 ■ Purpose: Splitting SHV cables (1:2) (Alternative to T-shaped connectors) ■ Main Specifications: 3 SHV connectors (jacks) *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "RJ45 Connector Conversion Box" handled by ANSeeN Co., Ltd. The model number is CBX01, and it is used to connect the small preamplifier CSP04 to existing main amplifiers, etc. It converts BNC (signal), DSUB (preamplifier power ±12V), and two auxiliary voltages (banana) to RJ45. 【Overview (partial)】 ■ Model number: CBX01 ■ Purpose: Connect the small preamplifier CSP04 to existing main amplifiers, etc. ■ Main specifications: - Converts BNC (signal), DSUB (preamplifier power ±12V), and two auxiliary voltages (banana) to RJ45. *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "Power Supply for Preamp (+/-12V)" handled by ANSeeN Co., Ltd. The model number is PPS01, and it is used for powering preamps (DSUB 9-pin connector). The output is ±12V (DSUB9 pin, NIM bin arrangement) / 100mA each. Please feel free to consult us when you need assistance. 【Overview (partial)】 ■Model Number: PPS01 ■Usage: Power supply for preamps (DSUB 9-pin connector) ■Main Specifications: Output ±12V (DSUB9 pin, NIM bin arrangement) / 100mA each *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "Bias Power Supply for Semiconductor Detectors" handled by ANSeeN Co., Ltd. The application is for the bias power supply of semiconductor detectors. The model numbers are HV02-P (positive) and HV02-N (negative). The old model numbers are HVP-SHV-02 and HVN-SHV-02. The output voltage range is 240V to 1400V (polarity specified at the time of order). Please feel free to consult us when you need assistance. 【Overview (partial)】 ■ Model numbers: HV02-P (positive), HV02-N (negative) * Old model numbers HVP-SHV-02, HVN-SHV-02 ■ Application: Bias power supply for semiconductor detectors ■ Main specifications: Output voltage range 240V to 1400V (polarity specified at the time of order) * For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "Bias Power Supply for Photomultiplier Tubes" handled by ANSeeN Co., Ltd. The model numbers are HV01-P (positive) and HV01-N (negative). The old model numbers are HVP-SHV-01 and HVN-SHV-01. The application is for the bias power supply of photomultiplier tubes. The output voltage range is 200V to 1100V (polarity specified at the time of order). Please feel free to consult with us when placing an order. 【Overview (Partial)】 ■ Model Numbers: HV01-P (positive), HV01-N (negative) *Old model numbers HVP-SHV-01, HVN-SHV-01 ■ Application: Bias power supply for photomultiplier tubes ■ Main Specifications: Output voltage range 200V to 1100V (polarity specified at the time of order) *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "Preamp for Photomultiplier Tubes" handled by ANSeeN Corporation. We offer two models: "AMP01 (formerly AMP-BNC-01)" for output extension and "AMP03 (formerly AMP-BNC-03)" for output shaping. The gain for "AMP01" is 10V/V@50Ω, 0.5mV/uA@50Ω, while "AMP03" has a gain of 10mV/pC@HiZ. 【AMP01 Main Specifications (Partial)】 ■ Gain: 10V/V@50Ω, 0.5mV/uA@50Ω ■ Rise Time: Less than 5ns ■ -3dB Bandwidth: 100MHz *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "Compact Preamp" handled by ANSeeN Corporation. The model number is CSP04, and its applications include semiconductor detectors and remote measurements. The chassis size is 3cm x 3cm x 9cm (excluding protrusions). The main specification is remote measurement exceeding 10m using an RJ45 cable. Please feel free to consult us when you need assistance. 【Overview (Partial)】 ■ Model Number: CSP04 ■ Applications: Semiconductor detectors, remote measurements ■ Main Specifications - Remote measurement exceeding 10m using an RJ45 cable - Chassis size 3cm x 3cm x 9cm (excluding protrusions) *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the USB-powered device 'Pocket MCA' handled by ANSeeN Corporation. The model number is PMCA01 (previous model number PMCAX-CH01-01), designed as a compact MCA for educational purposes. It operates on USB bus power. Please feel free to consult us when you need assistance. 【Overview】 ■Model Number: PMCA01 ■Previous Model Number: PMCAX-CH01-01 ■Purpose: Compact MCA for educational use ■Main Specifications: Operates on USB bus power *For more details, please refer to the related links or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "Waveform Analysis Device (General-purpose 4ch MCA)" handled by ANSeeN Corporation. By measuring the peak value and edge time (rise time) or decay time, waveform discrimination is possible. Simultaneous measurement across all channels is possible, and by equipping an optional dedicated IP, coincidence measurement and correlation measurement can also be performed. 【Features】 ■ Equipped with waveform discrimination function ■ High-voltage power supply included ■ Simultaneous measurement of 4 channels ■ Highly user-friendly digital control *For more details, please download the PDF or feel free to contact us.

• Other analyses

We would like to introduce the small preamplifier "CSP04 Series" handled by ANSeeN Co., Ltd. This preamplifier is designed for semiconductor detectors such as CdTe detectors, and its compact size of 3cm x 3cm x 9cm (excluding protrusions) allows for installation in tight spaces. Additionally, it uses an RJ45 cable for connections, enabling measurements from remote locations over 10 meters away. The feedback capacitance, bias resistance, and buffer gain can be customized to match the detector. 【Specifications (partial)】 ■ Power supply: +/-12V (RJ45 connector) ■ Detector connection terminal: BNC connector ■ Detector bias input: built-in or RJ45 connector ■ Output terminal: RJ45 connector (50Ω termination) ■ Test pulse input terminal: none *For more details, please download the PDF or feel free to contact us.

• Amplifier

We would like to introduce the preamplifier 'CSP02' for semiconductor detectors handled by ANSeeN Corporation. This preamplifier is designed for detectors with low leakage current and low capacitance, such as CdTe detectors, and is composed of an AC-coupled charge-sensitive preamplifier. It features a high-speed specification compatible with 100MHz sampling for waveform analysis (rise time of less than 10ns) and can also be used for analyzing charge movement within semiconductor detectors. 【Main Performance】 ■ Noise: 350 electrons FWHM at 0pF ■ Gain: 1 V/pC ■ Rise Time: 6ns at 0pF *For more details, please download the PDF or feel free to contact us.

• Amplifier

The "High-Speed, High-Sensitivity X-ray Line Sensor" efficiently images X-rays using a 1mm thick cadmium telluride (CdTe) semiconductor detector. It has sufficient absorption efficiency for X-ray photons exceeding 100 keV, allowing for imaging of thick metal products that are typically difficult to inspect with conventional X-ray methods when combined with high-voltage X-ray sources. It can capture images at a speed of over 500 frames per second, making it suitable for high-speed inline inspections in shipping inspection processes. 【Features】 ■ 1mm thick cadmium telluride (CdTe) semiconductor detector ■ Sufficient absorption efficiency for X-ray photons exceeding 100 keV ■ Capable of imaging thick metal products ■ Directly converts X-ray photons into charge within the pixel ■ Capable of imaging at video rates *For more details, please refer to the related links or feel free to contact us.

• X-ray inspection equipment
• Sensors
• Other inspection equipment and devices

"Monita-kun" is an energy-discriminating radiation detector capable of spectral measurement. It can primarily be used for identifying radioactive isotopes. By connecting the "Monita" to a PC via a USB cable and setting the conditions with dedicated software, measurement begins in three steps: setting the conditions, pressing the measurement start button. Additionally, it can be used on a variety of devices, including desktop computers, laptops running Windows OS, and tablets. 【Features】 ■ All-in-one ■ USB bus-powered ■ Low cost ■ High energy resolution ■ Maintenance-free *For more details, please refer to the catalog or feel free to contact us.

• Radiation detector
• Other measurement, recording and measuring instruments