ラトックシステム List of Products and Services

The IoT liquid level remote monitoring system uses a level gauge installed in the tank to regularly measure the water level. The system automatically calculates the liquid volume via an app, allowing for remote confirmation, notification, and data management. A level gauge is retrofitted to existing tanks, and measurement data is transmitted wirelessly (Wi-SUN) from the communication unit to the gateway. The gateway aggregates data from each level gauge and connects to the cloud via public lines (LTE-M). It does not require Wi-Fi or communication equipment, with a maximum line-of-sight coverage of 500 meters, and up to 1 kilometer with a relay specification. It can be implemented at a low cost and quickly. When the liquid volume exceeds the pre-set upper or lower limits, a push notification is sent. This enables early detection and response.

• Storage Tank

This product outputs HDMI signals from video output devices, sending video signals to the TV and audio signals to the amplifier via optical digital or RCA. It supports high-resolution outputs such as "8K 60Hz" and "4K 120Hz." It reproduces high-definition images of 8K/4K content directly on TVs and displays. It features a switch for changing audio modes, allowing easy switching between "optical digital" and "analog RCA" without the need to change cables. It can be purchased individually from retail.

• Exhibition planning/construction

This is a set of cables that allows wireless output from the USB-C port of a laptop or tablet to a TV or display. No setup is required. Simply connect the transmitter to a USB-C port that supports DP Alternate Mode (video output) and the receiver to the HDMI port of the TV or display. It enables easy establishment of a wireless environment, allowing for efficient preparation for meetings and presentations. 【Features】 ■ Maximum transmission distance of approximately 30m, can be installed in a layout-free manner ■ Supports mirroring/extended mode ■ Can connect up to 5 transmitters including this product

• Web/Video Conference

This is a set of cables that allows wireless output of video from devices such as laptops equipped with HDMI ports to TVs or displays with HDMI input terminals. No setup is required; simply connect the transmitter to the laptop and the receiver to the TV or display. It enables easy establishment of a wireless environment, making it efficient for preparing meetings and presentations. 【Features】 ■ Maximum transmission distance of approximately 30m, allowing for flexible layout and installation ■ Supports mirroring/extended mode ■ Can connect up to 5 transmitters including this product

• Web/Video Conference

The RS-SG2000 series is a system set that controls DIO and AD via SubGiga wireless. A USB dongle is attached to a Windows PC, allowing control of DIO and AD conversion units installed at remote locations. ● DIO RS-SG2010T/10M + Equipped with 8 channels each for digital input and output ports. Includes 1 channel each for trigger input and strobe output. + Features a common power terminal for supplying power and grounding to the input/output terminals. ● AD Conversion RS-SG2040T/40M + Equipped with 8 channels for analog input ports and 1 channel for digital output ports. + The analog input voltage ranges are ±10V, ±5V, ±2.5V, ±1V, ±0.5V, 0-10V, 0-5V, 0-2.5V, 0-1V. Voltage ranges for each channel can be switched via software. + Resolution of 12 bits and a sampling rate of 500 kbps. + Supports current measurement of 4-20mA. ● Common Specifications + Signal input connectors are available in terminal block type (ending with T) and MIL connector type (ending with M). + Capable of measuring the ambient temperature and humidity at the installation site. For further details, please contact us separately.

• Embedded Board Computers

In recent times, with the increase in digital devices and battery-powered equipment, portable power supplies play a crucial role in emergency responses during disasters or outdoor situations. However, even with high-capacity power sources, the number of USB ports available is limited. This shortage of USB ports can lead to concerns about insufficient charging during critical moments, potentially hindering communication through devices like smartphones. The USB charging station is a charger equipped with 10 USB ports, allowing for the rapid charging of multiple devices such as smartphones, tablets, and mobile batteries all at once. It is suitable for situations where you want to efficiently charge multiple devices in a limited space. There are models available with a total of up to 300W and others with a maximum of 450W.

• Charger

This is a high-output charger equipped with multiple USB ports, capable of charging devices such as smartphones, tablets, and laptops simultaneously. It allows you to charge multiple devices in a limited space by leaning them against the partition board. There are models with a total of 300W across 10 ports and models with a maximum of 450W. 【Features】 - Choose to connect either USB Type-C or USB Type-A (10 ports each) - High output of 30W for 10 devices (RS-USBCS10-300), 45W for 10 devices (RS-USBCS10-450) - Supports the fast charging option standard "PD-PPS" - Equipped with a partition board that can be leaned against - Includes a cooling fan and ventilation openings - Housing material: SPCC (steel plate)

• Charger

The Rattok serial adapter series, widely adopted in manufacturing settings for "serial communication," is designed to be more convenient and adaptable to various applications and environments, supporting a range of interfaces. The lineup is as follows: 【Lineup】 《USB Wired Models》 USB Type A, USB-C, USB bus-powered types. 《Bluetooth Communication Models》 - REX-BT62 (Standard type, male connector) - REX-BT62M (Master mode, female connector) - REX-BT62CR (Cable replacement) 《SubGiga Communication Models》 - RS-SG61, RS-SG61mk2 《Wi-Fi Communication Models》 - REX-WF60 《Wired Ethernet Models》 - REX-ET62 【Convenient Uses of Serial Adapters】 - Connecting various measuring instruments to a host terminal to consolidate measurement results - Connecting to devices that are difficult to reach with cables - Connecting to PCs without a serial port - Working outdoors (such as surveying) - Can be treated as an IP device, allowing for the construction of an environment independent of the OS.

• Other network tools

"HasaRepo" is a cloud-based IoT temperature management system that automatically records temperatures and water temperatures in refrigerated, frozen, and temperature-controlled warehouses, as well as room temperatures and humidity in workspaces, allowing for remote monitoring via smartphone or PC at any time. It notifies you of temperature changes and equipment anomalies on-site. <Features> ■ Displays temperature and humidity collectively on PC or smartphone ■ Sends data wirelessly at regular intervals (every 5 minutes) ■ Sends alert notifications to smartphones when the temperature exceeds the set range ■ Temperature sensors are battery-operated ■ Wireless connection in the 920MHz band with a maximum communication distance of 1000m (using a repeater, line of sight) ■ Gateway and cloud are connected via LTE-M, enabling centralized temperature management across multiple locations ■ Logs can be displayed in graphs and support CSV output ■ Notifies smartphones of signals from contacts

• Data Logger

"Hasa Repo" automatically records the temperature and humidity of refrigerated, frozen, and constant temperature warehouses and workspaces. It is a cloud-based IoT temperature management system that can be checked anytime via smartphone or PC. No wiring is required, and it can be implemented from a single location at a low cost. <Features> ■ Displays temperature and humidity collectively on PC or smartphone ■ Automatically saves data every 5 minutes and monitors temperature ■ Notifies via smartphone or email in case of temperature anomalies ■ Allows input of comments in the notification history ■ Temperature sensors are battery-operated and can be installed where needed ■ Can also notify signals from control panels (voltage-free contacts) ★★★ Free demo units available for corporations ★★★ Please apply by clearly stating "Request for product loan" in the inquiry section below. We will contact you shortly. Alternatively, please apply via the following URL: https://business.form-mailer.jp/lp/c80febb9228495

• Data Logger

■Easy measurement of power consumption by simply plugging it into an outlet ■Displays seven types of numerical data on smartphones or Windows PCs ■Real-time monitoring and analysis of logs at a later date are possible ■Stores power consumption data for over two months with hourly measurements ■Measurement data can be exported to a CSV file ■Check measurement data from a smartphone while on the go ■Remote power ON/OFF capability ■"Lightning Guard" feature protects connected appliances from lightning surges ■Can connect appliances up to 100V/15A, 1500W

• Power Monitoring Equipment

Smartphones and tablets are widely used not only by individuals but also as devices for corporations. The "USB Charging Station" is a USB charger that can charge up to 10 of these devices simultaneously. It allows you to charge devices in an upright position, making it useful as a storage tool for the devices. It supports fast charging within a total maximum output range of 19.2A; for example, with a 2.4A tablet, it can fast charge up to 8 devices at once. (If the limit is exceeded, it will adjust the output to the optimal level for charging.) ■ USB 10-port charger supporting fast charging ■ Total maximum output of 19.2A! Can charge 10 devices simultaneously ■ Supports fast charging/high-speed charging such as 12W ■ Smart IC function for charging at optimal output ■ Adjustable positions with 14 partition plates ■ Heat dissipation and protection circuit design for safety in case of emergencies

• Charger

■Easily measure power consumption by simply plugging into a 3-pin outlet ■Display 7 types of numerical data on your smartphone or Windows PC ■Automatically save logs to the device and display graphs in the app ■Obtain power consumption data for over 2 months with hourly measurements ■Real-time measurement is also possible (on the same network) ■Logs can be exported as CSV files ■Check measurement data from your smartphone while on the go ■Remote power ON/OFF capability ■"Lightning Guard" feature protects connected appliances from lightning surges ■Compatible with appliances up to 100V/15A, 1500W

• Power Monitoring Equipment

**Examples of Digitization for Devices Without External Output** While promoting digital transformation (DX) in factories and workplaces, there may be equipment and devices that lack output connectors, making it challenging to capture data. We will introduce a case study of commissioned development from a customer who manufactures screws, showcasing how digitization was achieved in such environments. *For more details, please download the catalog or check the linked page.* **Strengths of Ratoc System** ■ Development achievements as a PC peripheral manufacturer ■ Support with a wide range of technical capabilities from the latest to legacy systems ■ Ability to meet various production demands of customers through a fabless approach ■ Proposals including cloud integration are also possible

• Circuit board design and manufacturing

Wi-Fi Watt Checker RS-WFWATTCH2 Main Features ■ Easily measure power consumption by simply plugging it into a 3-pin outlet ■ Display seven types of numerical data on your smartphone or Windows PC ■ Automatically save logs to the device and display graphs in the app ■ Obtain power consumption data for over two months with hourly measurements ■ Real-time measurement is also possible (on the same network) ■ Logs can be exported as CSV files ■ Check measurement data from your smartphone while away from home ■ Remotely turn the power ON/OFF ■ "Lightning Guard" feature protects connected appliances from lightning surges ■ Can connect appliances up to 100V/15A, 1500W

• Power Monitoring Equipment

A KVM switch is a device that allows you to control multiple computers using a single set of keyboard, display, and mouse. This eliminates the need to purchase separate keyboards, displays, and mice for each computer, allowing for a more spacious desk area. There are various models of KVM switches with different specifications, including the types of ports they are equipped with and the features they support. The downloadable materials explain the following selection points and introduce recommended models. 【Selection Points for KVM Switches】 1. Video output connector 2. Number of PCs to connect 3. Output resolution 4. Presence of USB hub 5. Switching method

• Other PCs and OA equipment

The opportunities for smartphones to be utilized in business scenes are increasing more and more. With this product, you can project your smartphone's video onto a TV. Simply connect the smartphone's USB Type-C port directly to the TV's HDMI input. You can easily enjoy mirroring on a large screen anywhere. It supports PD, allowing you to charge your smartphone while outputting video, so there’s no stress from battery consumption. ■ Easy output to displays with HDMI input from USB Type-C ■ Simple connection by just plugging into the port ■ Selectable mirroring/extended mode ■ Enjoy vibrant visuals with up to 4K 60Hz and HDR support ■ Equipped with a PD 3.0 compatible port that supports up to 100W

• Image Transmission Equipment

A compactly designed laptop that is convenient for portability and telecommuting. In recent years, there has been an increase in models that do not have power jacks or HDMI ports, equipping only USB Type-C for external connections. This is where PD (Power Delivery) compatible USB Type-C products come in handy. The Dual HDMI Display Adapter RS-UCHD2-PD supports PD power delivery. It allows you to power your laptop through a single USB Type-C port while connecting two external monitors. ■ Easy output from USB Type-C to two 4K displays ■ Can be used while providing up to 100W of power ■ Selectable extension/duplication modes ■ Supports high-definition 4K 60Hz output ■ Compatible with ultra-wide monitors ■ Simple connection by just plugging into the port ■ Made with high-rigidity plastic and high-heat-dissipating aluminum

• Image Transmission Equipment

A compactly designed laptop that is convenient for portability and telecommuting. In recent years, there has been an increasing number of models that do not have a power jack and are equipped only with USB Type-C for external connections. What is convenient here is the USB Type-C product that supports PD charging. The multi-adapter RS-UCHD-PHL4 is a compact docking station that allows you to power your computer through a single USB Type-C port while connecting displays, USB devices, and wired LAN. ■ Equipped with 3 USB Type-A ports ■ Includes a high-speed gigabit LAN port ■ HDMI port included, supports up to 4K 60Hz, compatible with ultra-wide monitors ■ Combined with clamshell mode for a comfortable work environment ■ Equipped with a PD 3.0 compatible port that supports up to 100W ■ Compatible with Windows, Mac, Chromebook, iPad, and iPhone 15 ■ Easy setup with no driver installation required

• Expansion Boards

The RS-UCLAN-H3 is a wired LAN adapter with a USB Type-C connection that supports USB 3.2 Gen 1 and high-speed Gigabit (1000BASE-T). With a maximum transfer speed of approximately 967 Mbps (measured value), it ensures a stable communication environment for online tasks such as web meetings. ■ High-speed and stable communication USB wired LAN adapter ■ Equipped with high-speed LAN supporting Gigabit (1000BASE-T) ■ Three USB 3.2 Gen 1 (5Gbps) ports ■ Confirmed to work with various devices equipped with USB Type-C ■ Easy setup with no driver installation required

• Expansion Boards

The RS-UCHD-PHZ is a docking station type USB adapter that connects to a computer's USB Type-C port, allowing the simultaneous use of an HDMI display and various USB-connected devices. This product features a USB hub function, HDMI output function, and a USB Type-C power delivery (PD) port (60W). It enables the connection of USB devices necessary for telecommuting or remote work with just one cable. Even laptops with limited USB Type-C ports that combine power delivery and USB device connections can use external video output, USB device connections, and charging for the computer simultaneously. ■ Multi-adapter that expands the computer's USB-C port ■ Connects USB devices, displays, and PD with a single cable ■ Equipped with two USB ports compatible with USB 3.2 Gen1 ■ Supports high-resolution output up to 4K 60Hz with DP1.4 Alt mode ■ Compatible with ultra-wide monitors ■ Features a USB PD (Power Delivery) port that supports 60W ■ The casing is made of high-rigidity plastic and high-heat-dissipation aluminum

• Expansion Boards

The RS-UCLAN-PD is a wired LAN adapter with a USB Type-C connection that supports USB 3.2 Gen 1 and high-speed Gigabit. It ensures a stable communication environment for online work such as web meetings. With a PD 3.0 compatible port, it can be used while being powered with up to 100W. ■ High-speed and stable communication USB wired LAN adapter ■ Equipped with high-speed LAN supporting Gigabit (1000BASE-T) ■ Compatible with Windows, Mac, Chromebook, iPad, and Nintendo Switch(R) ■ Features a PD port with up to 100W, allowing use while powered ■ Easy setup with no driver installation required ■ Long cable for easy wiring

• Expansion Boards

The IoT temperature controller remote monitoring system is a system that allows you to check the temperature of the controller remotely. A communication unit is attached to existing temperature controllers, and data is transmitted wirelessly. The gateway aggregates the data from each temperature controller and connects to the cloud via a public line (LTE-M). This setup allows for temperature (SV value) checks and changes to the set temperature (PV value) anytime and anywhere. It does not require Wi-Fi or communication equipment, making it possible to implement at low cost and quickly. Furthermore, when the temperature deviates from a pre-specified range, a push notification is sent to your smartphone. This enables early detection and response.

• Communications

The IoT temperature controller remote monitoring system is a system that allows you to check the temperature of the controller remotely. A communication unit is attached to existing temperature controllers, and data is transmitted wirelessly. The gateway aggregates data from each temperature controller and connects to the cloud via public lines (LTE-M). This system allows you to check the temperature (SV value) and change the set temperature (PV value) anytime and anywhere. It does not require Wi-Fi or communication equipment, making it possible to implement quickly and at a low cost. Furthermore, when the temperature deviates from a pre-specified range, a push notification is sent to your smartphone. This enables early detection and response.

• Communications

When advancing the IoT integration of existing equipment, isn't the question of "what to do with existing devices that do not support wireless communication" a barrier? For those facing such issues, we recommend the "IoT Communication Kit." It supports everything from wireless communication for devices to AWS cloud configuration. The unit that wireless-enables signals from devices is compatible with voltage-free contacts, RS-485, and 4-20mA inputs. It transmits using 920MHz radio waves that cover a wide range to the gateway. The connection to the cloud is made via an LTE-M line, and it can be installed in areas where LTE lines, such as docomo, are available. The "IoT Communication Kit" solves challenges for those who can develop programs in-house but struggle with how to wireless-enable control panels and similar equipment.

• Communications

With the dual display compatible HDMI computer switcher "RS-250UH2," you can easily switch between your favorite devices on two computers for comfortable operation. Share your familiar keyboard and mouse across multiple computers to improve work efficiency. There's no need to prepare a display for each PC, allowing for a space-saving and spacious operating experience. 【Features】 ■ Comfortable operation by switching keyboard, display, and mouse between two computers ■ Simultaneous switching of 4K dual displays ■ Compatible with ultra-wide monitors ■ Easy switching with just the push of a button ■ Supports wireless keyboard and mouse ■ Equipped with a convenient USB 2.0 port ■ Operates via USB bus power from the computer ■ Compact design that doesn't get in the way when placed nearby

• Other PCs and OA equipment

■Long-selling product■ REX-SATA 3 Series (USB connection model) Insert the SATA HDD into the tray for removable storage. Use the main unit and tray together. Connect the main unit to the USB port of your computer. 【Features】 ■ Convenient tray-style removable case for large-capacity data management ■ Easy connection with a single USB cable ■ Compatible with both 3.5-inch HDDs and 2.5-inch HDD/SSDs ■ Tested and confirmed to work with 24TB HDDs ■ Tray insertion and removal protects the HDD connector from damage ■ Hot-swappable for tray exchange while the computer is powered on ■ Includes index labels for tray classification ■ Equipped with a fan for reliable operation even during long hours of use ■ This product is stackable

• Storage

■Long-selling Product■ REX-SATA 3 Series (Internal Model) Insert a SATA HDD into the tray for removable storage. Use the main unit and tray together. The dock can be neatly installed in the computer's 5-inch bay. 【Features】 ■ Convenient tray-type removable case for managing large volumes of data ■ Main unit can be mounted in a 5-inch bay ■ Compatible with both 3.5-inch and 2.5-inch drives, verified to work with 24TB HDDs ■ Tray insertion and removal protects the HDD connector from damage ■ Includes index labels for tray classification ■ Aluminum body and airflow structure help suppress HDD temperature rise ■ Equipped with a 6Gbps repeater for stable high-speed transfers ■ Hot-swappable tray exchange while the computer is powered on ■ LED indicator shows HDD access status

• Storage

■Recommended Removable Case for Multiple Generational Backups■ A backup spanning multiple generations is effective as a precaution against data corruption due to virus infections or operational errors. By rotating multiple hard disks and keeping backup data from several generations ago, you can have peace of mind in case of emergencies. Do you think you need to connect multiple hard disks to keep backups at various intervals? With a removable case, you can achieve high-speed transfers and large capacity with just one connection. Disk swapping is possible, making regular backup tasks comfortable. ■Long-selling Product■ REX-SATA 3 Series (USB Connection Model) Insert a SATA HDD into the tray for removable storage. Use the main unit and tray together. Connect the main unit to your computer's USB port.

• Storage

■Recommended Removable Case for Multi-Generation Backup■ A multi-generation backup is effective in preparing for data corruption due to virus infections or operational errors. By rotating multiple hard disks and keeping backup data from several generations ago, you can have peace of mind in case of emergencies. Do you think you need to connect multiple hard disks to keep backups at various intervals? With a removable case, you can achieve high-speed transfers and large capacity with just one connection. Disk swapping is possible, making regular backup tasks comfortable. ■Long-Selling Product■ REX-SATA 3 Series (Internal Model) Insert a SATA HDD into the tray for removable storage. Use the main unit and tray together. The dock can be neatly installed in your computer's 5-inch bay.

• Storage

This document is a product introduction for the IoT alarm transmission and reception system "WorkWatch Alarm." This product is a system set composed of four elements, including the wristwatch-type terminal "REX-BTWA60" worn by workers. It includes an overview of the product configuration, applications, usage examples, and more. The kanji representation of the wristwatch terminal is scheduled to be updated in December 2020. [Contents] ■ Product configuration overview/details ■ Upper limits of the WorkWatch Alarm system ■ Basic functions ■ Applications, usage examples ■ Display information ■ About sample applications *For more details, please refer to the PDF document or feel free to contact us.

• Other production management systems

This document introduces the features of the wristwatch-type communication system "WorkWatch Alarm for AirGRID." It includes main functions such as wireless system, message reception, safety monitoring, and alarm transmission, as well as system configuration devices and product lineup. *The wristwatch terminal display will now support kanji characters. (Scheduled for December 2020) [Contents (excerpt)] ■ Main functions ■ System configuration devices ■ Limitations and restrictions of the WorkWatch system ■ Example of system configuration ■ Product lineup *For more details, please refer to the PDF document or feel free to contact us.

• Other production management systems

The "REX-WF60" is a Wi-Fi adapter for serial devices. By simply attaching this product to existing serial (RS-232C) equipment, wireless communication, control, and access via Wi-Fi become possible. Access to serial devices can be achieved through existing network equipment. You can access serial devices located remotely. Additionally, we also offer a Bluetooth adapter for serial devices, the "REX-BT60." 【Features】 ■ Compliant with IEEE802.11b/g ■ Supports WEP-128, WPA-PSK (TKIP), WPA2PSK (AES) authentication ■ Compatible with Android 2.3 and later ■ Compatible with Windows *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "RS-SG61" is a serial interface that uses SubGiga (920MHz band) communication, which excels in long-distance data transmission. By simply attaching it to existing serial (RS-232C) devices, wireless communication and control can be performed. It is recognized as COMx from a Windows PC, allowing most existing applications that support COM ports to be used as is. 【Features】 ■ Uses 920MHz band (compliant with ARIB STD-T108) wireless communication ■ By connecting a USB dongle to the Windows PC side and a serial adapter and AC adapter to the RS-232C device side, serial communication is made wireless ■ Equipped with LEDs that indicate the serial communication status and SubGiga status ■ Sample application for Windows included ■ Supports hardware flow control using CTS/RTS ■ Free from 10 harmful substances *For more details, please refer to the PDF document or feel free to contact us.

• converter

"WorkWatch Alarm" is a system that facilitates message transmission and reception between a Windows application and a wristwatch terminal. It utilizes SubGiga band wireless technology, allowing for message transmission and reception from a remote location (approximately 1 km away). By using the standard communication library included, users can integrate their own applications or existing systems. Workers only need to wear a robust and lightweight wristwatch terminal, minimizing any disruption to their work. 【Features】 ■ Ability to send alarms from a Windows PC to the wristwatch terminal * The wristwatch terminal will support kanji characters (scheduled for December 2020). ■ Retrieve information from the wristwatch terminal and various sensors it is equipped with ■ Notify the Windows PC of falls or tumbles detected by the wristwatch terminal ■ Control relay output terminals mounted on the GateWay ■ Display custom text on the GateWay display from a Windows PC * For more details, please refer to the PDF materials or feel free to contact us.

• Other network tools

"WorkWatch Alarm for AirGRID" is a communication system that notifies users of changes in the signal lights manufactured by Patlite through vibrations on a wristwatch terminal. The system can be set up within a range of approximately 1 km from the connected PC. It allows users to be aware of changes in the signal lights even from locations where they cannot visually confirm them. *The wristwatch terminal will now support the display of kanji characters. (Support expected in December 2020) 【Features】 ■ A transmission and reception system that detects the status of signal lights and delivers information ■ The wristwatch terminal WorkWatch Alarm is used for notifications ■ Notifications can be sent to the entire terminal or to individual terminals ■ Messages can be sent and received to and from workers via Windows PC ■ In emergencies, such as during disasters, priority mass notifications can be sent ■ The wristwatch terminal notifies the Windows PC of detected falls or drops *For more details, please refer to the PDF document or feel free to contact us.

• Other production management systems

REX-USB61 is a protocol emulator for SPI/I2C realized with a USB device and a Windows application. It allows for the operation verification and evaluation of various SPI and I2C devices. A debugging environment for embedded SPI/I2C devices can be constructed in a Windows environment. In SPI mode, it supports master mode with a maximum frequency of 12MHz and is equipped with 4 DigitalOut ports for slave selection. In I2C mode, it supports both master and slave modes, with frequencies of 100KHz, 400KHz, and 1KHz (SCL). *Note: However, the I2C slave mode does not support 10-bit addressing. *Clock stretching is not supported. It supports power supply to connected devices (3.3V or 5V). Additionally, by applying voltage to the power terminals from an external source, it can support interface levels from 1.8V to 5V. *For more details, please refer to the PDF documentation or feel free to contact us.

• Development support tools (ICE, emulators, debuggers, etc.)

The REX-USB61mk2 is a high-speed, multifunctional SPI/I2C protocol emulator set that works with USB devices and Windows applications. It allows for the operation verification and evaluation of various devices that comply with SPI and I2C specifications. A debugging environment for embedded devices can be built on Windows. It achieves approximately six times faster communication than the previous model (REX-USB61) (compared to our own standards, when using SPI). SPI supports both master mode and slave mode. The bus width supports Single/Dual/Quad. The supported frequency ranges from 762 MHz to 50 MHz. Clock modes (Mode 0 to 3) can be selected. It has one Slave Select port (with the option for positive or negative logic). The I2C mode supports both master mode and slave mode. It supports communication modes including Standard, Fast, Fast-mode Plus, High-Speed, and Ultra-fast modes. The supported frequency ranges from 762 Hz to 5 MHz. It supports clock stretching and multi-master configurations. *For more details, please refer to the PDF document or feel free to contact us.

• Development support tools (ICE, emulators, debuggers, etc.)

The "RPi-CM3MB3/RPi-CM3MB2" is a carrier board compatible with the Raspberry Pi Compute Module 3/Lite. It features a HAT-compatible GPIO 40-pin connector and 4 additional GPIO terminals. It can be used as a boot disk for the CM3 Lite (SDHC, up to 32GB). Additionally, the "RPi-CM3MB2" is equipped with a system backup power supply, allowing for safe shutdown in the event of unexpected power loss. 【Common Specifications (partial)】 ■ HAT-compatible GPIO 40-pin connector ■ 4 additional GPIO terminals ■ microSD slot ■ USB 2.0 downstream port ■ RTC (Real Time Clock) *For more details, please refer to the PDF documentation or feel free to contact us.

• Embedded Board Computers

This product is a cloud keyboard that enables easy and low-cost IoT management and record-keeping. The setup and operation are simple. Information is directly uploaded to the cloud through numerical input. Additionally, there is no need to connect the keyboard to a computer or tablet; it can be implemented immediately as long as there is a Wi-Fi environment. 【Features】 ■ All you need is an internet connection, a Wi-Fi router, and a power source. ■ It uses a numerical input method, making it easy for anyone to use. ■ It is the size of a calculator, taking up little space, making it easy to install in small stores or offices. ■ The flat surface can be wiped clean, making it easy to handle. *For more details, please refer to the PDF document or feel free to contact us.

• keyboard

"WorkWatch Alarm for AirGRID" is a system that notifies users via vibration on a wristwatch terminal of changes in signal lights manufactured by Patlite, installed in factories and facilities. *The wristwatch terminal's display will now support kanji characters. (Scheduled for December 2020) A system can be built within a 1km range from a PC connected to Patlite's "AirGRID," allowing messages to be sent to the wristwatch terminal based on the CSV files updated by AirGRID. This enables users to confirm and understand changes in signal lights from locations where they cannot be visually observed. 【Features】 ■ A transmission and reception system that detects the status of signal lights and delivers information ■ Uses the wristwatch terminal WorkWatch Alarm for notifications ■ Notifications can be sent to the entire terminal or to individual terminals ■ Allows for sending and receiving messages to workers via Windows PC ■ In emergencies, such as disasters, prioritized mass notifications are possible ■ The wristwatch terminal can notify the Windows PC of detected falls or tumbles *For more details, please refer to the PDF document or feel free to contact us.

• Other production management systems

The "WorkWatch Alarm for AirGRID" is a system that notifies users via vibration on a wristwatch terminal of changes in the signal lights manufactured by Patlite installed in factories and facilities. *The wristwatch terminal display also supports kanji characters. (Scheduled for support in December 2020) 【System Configuration Devices】 WorkWatch Alarm ■ Wristwatch-type WorkWatch terminal ■ SubGiga-Bluetooth gateway ■ USB-SubGiga host adapter ■ Windows application PATLITE ■ Signal lights manufactured by Patlite ■ Patlite's 【AirGRID】 【System Limits and Restrictions】 SubGiga-USB Host Adapter 【RS-SG60×1 pcs】: One unit can be installed per system SubGiga-Bluetooth Gateway 【RS-GW60A-BS】: Up to 16 units can be added per system Wristwatch-type terminal 【RS-BTWA60】: Up to 100 units can be connected per system *For more details, please download the image or PDF.

• Other production management systems

"WorkWatch Alarm for AirGRID" is a system that notifies wristwatch terminals of changes in signal lights manufactured by Patlite, installed within factories and facilities, through vibrations. * The wristwatch terminal display also supports kanji characters. (Supported since December 2020) 【Function Details】 ■ Message Sending (Signal Light Association) - Messages can be sent in response to changes in signal lights. - You can pre-set the signal lights you want to monitor and the corresponding strings associated with those signal lights. ■ Message Sending (Group Sending) - It is possible to group wristwatch terminals that will receive messages based on the signal lights. - Grouping of wristwatch terminals for message sending can be done based on the state of the signal lights (on, blinking, off). - Grouping of wristwatch terminals for message sending can be done when both the signal light and its state meet the specified conditions. - When the specified signal light or signal color is on, blinking, or off, a vibration message can be sent to the wristwatch terminal. - You can specify the message display time (up to 254 seconds) and the wristwatch terminal vibration time (up to 60 seconds). - Messages with a request for a reply can be sent.

• Other production management systems

"WorkWatch Alarm for AirGRID" is a system that notifies users via vibration on a wristwatch terminal of changes in signal lights manufactured by Patlite, installed in factories and facilities. It allows for quick awareness of the status of the signal lights and enables the construction of a real-time-focused site management system. *The wristwatch terminal's display will now support Kanji characters. (Scheduled for December 2020) 【Function Details】 - Wristwatch Vibration Settings - ■ It is possible to link and configure the names displayed on the signal lights and the wristwatch terminal. ■ It is possible to link and configure the lighting and blinking patterns of the signal lights with the names displayed on the wristwatch terminal. ■ Group settings for the wristwatch terminals that will vibrate can be configured. 【Function Details】 - Worker Accident Monitoring - ■ It can detect falls and slips of the wristwatch wearer. If the wearer of the wristwatch terminal falls or slips, the wristwatch terminal will detect it and automatically send a notification to a Windows PC. It is possible to roughly identify the location of the trouble based on the Gateway and signal strength. 【Function Details】 - Communication - ■ Replies to received messages. ■ Notification to the administrator by long-pressing the button on the wristwatch. ■ Measurement of temperature and humidity around the wristwatch.

• Other production management systems

This product is a discontinued item. Please see the successor model RS-USB602F. A super long-selling model released in 2006. Compatible with Windows, Windows Server, MacOS, and Raspberry Pi. Equipped with three types of access LEDs (Power, Tx, Rx), making it easy to check communication status. It is recognized as a COM port device in Windows, allowing the dedicated applications provided by various RS-232C device manufacturers to be used as is. (Not all COM port applications are supported.) For Raspberry Pi compatibility, please click on the Raspberry Pi banner from the link page of e2e-Store below.

• Communications