FCL Components Limited List of Products and Services

The "FTR-K1L" is a latching relay with 16A inrush current of 80A, featuring 1 pole with 16A 1a (1 make) and 1c (1 transfer) contacts. It can control a peak inrush current of 80A. Additionally, despite its small size, it has a high insulation design with a dielectric strength of 5,000VAC and a surge voltage withstand of 10,000V. 【Features】 ■ 1 pole 16A 1a (1 make), 1c (1 transfer) contact latching relay ■ Control capability for peak inrush current of 80A (make side) ■ UL TV-5 rating obtained (make side) ■ Low-profile relay with a height of 15.7mm and a mounting area of 368mm² ■ High insulation design despite its compact size ・ Dielectric strength: 5,000VAC ・ Surge voltage withstand: 10,000V

• relay

The "FTR-K1-AM" is a power relay suitable for onboard chargers of electric vehicles, capable of 20A current at 277VAC, designed for an ambient temperature of 105°C. 【Features】 - High capacity current rating for automotive use (20A 277VAC) - Manufactured in a factory certified to IATF16949 - 1 pole 16A 1a (1 make), 1c (1 transfer) contacts - Designed for an ambient temperature of 105°C - Low power consumption type with a power consumption of 400mW - Low-profile relay with a height of 15.7mm and a mounting area of 368mm² - UL insulation class F certification obtained

• relay

This is an interface board for the FTP-62E series printer mechanism, compatible with 6-inch and 8-inch wide paper, driven by 24V. It supports high-speed printing at 50mm/second and low-speed printing at 10mm/minute. Additionally, it is compatible with USB and RS232C interfaces and is equipped with various detection functions.

• Commercial printers

The FTR-E1 series is a high-capacity power relay capable of switching high voltage DC loads up to 10A and 1,000VDC. It includes PCB-mounted models rated at 20A (FTR-E1 -MF, -GR), 30A (FTR-E1 -HA), and 60A (FTR-E1 -HC), as well as a tab terminal screw type model rated at 20A (FTR-E1J). 【Features】 1. There is no polarity on the contact side, allowing it to accommodate both charging and discharging circuits. 2. Hydrogen gas is not used: it can be used safely without the risk of explosion. 3. It features a high insulation design with 5,000VAC between coil and contacts, and 2,500VAC between open contacts. The contact structure is 1a (1 form X), and the dimensions are 28.3(W) x 43.6(D) x 38.8(H) mm (FTR-E1J is 36.1mm high excluding protrusions).

• relay

- Compliant with European ATEX directives IEC/EN60079-0, IEC60079-1 (flux-free type), IEC/EN60079-0, IEC60079-15 (plastic seal type) - High insulation design with dielectric strength of 5,000VAC, surge voltage resistance of 10,000V, and air/creepage distance of 10mm - Low-profile design with a height of 15.7mm and a mounting area of 268mm² - Obtained UL insulation class F - Also available in a version compatible with ambient temperatures of 105°C - Obtained explosion-proof standard UL 121201 (Class I, Division 2) (only for 105°C plastic seal type) - Obtained explosion-proof standard CSA22.2 213-17 (Class I, Division 2) (only for 105°C plastic seal type)

• relay

- Compliant with the European ATEX directive IEC60079-15 - Obtained explosion-proof standard UL 121201 (Class I, Division 2) - Width 7mm, mounting area 142mm², single-pole slim type. - Rated power consumption 200mW - High insulation with dielectric strength of 4,000VAC, surge withstand of 10,000V, and creepage/clearance distance of 6mm - Also available in a version with TV-5 rating (inrush 78A) that is resistant to inrush current.

• relay

- Compliant with European ATEX Directive IEC60079-15 - Obtained explosion-proof standards UL 121201, CSA C22.2 No. 213 (Class I, Division 2) - Width 5mm, height 12mm, mounting area 100mm², ultra-slim single pole type - Rated power consumption 110mW - High insulation with dielectric strength of 3,000VAC, surge withstand of 5,080V, clearance distance of 5.15mm, and creepage distance of 5.89mm - Compliant with reinforced insulation standards UL61010-1, UL61010-2-201, IEC/EN61010-1, IEC/EN61010-2-201 - Automatic mounting/washable plastic sealed type

• relay

This is a slim-type relay with a highly insulated design and a low mounting area, particularly suitable for PLCs among industrial equipment. It is available in the FTR-MY and NY types with a contact rating of 5A, and the FTR-LY type with a rating of 6A. We offer both printed circuit board mountable and socket mountable types. It features a plastic seal that allows for automatic mounting and thorough washing. It has obtained various safety standards.

• relay

We offer Bluetooth Low Energy modules that achieve compact size and low power consumption, Bluetooth Dual Mode modules equipped with features that can replace serial cable connections (SPP), and Bluetooth beacons. FCL component wireless modules provide the following support: Antenna matching Implementation and installation Custom design of pattern antennas Certification acquisition Development environment

• Other electronic parts

This is an overview specification catalog covering FCL component power relays, automotive electrical relays, relays for EV/PHV, signal relays, plug-in relays, and solid-state relays (SSR).

• relay

This is a relay for signal switching in onboard equipment compatible with the commonly used 300-400 VDC batteries in EVs. We offer various series including the compact low-profile FTR-B3, the compact slim FTR-B4, and the high-voltage wide-gap FTR-C1 with increased insulation distance. It is suitable for applications such as switching the in-vehicle audio circuit for emergency calls (e-call) in EVs, battery monitoring, abnormal detection for overvoltage/overcurrent, and leakage detection for low/high voltage. It can also be used for low-voltage signal switching applications in gasoline and hybrid vehicles.

• relay

The "JSL" is a compact power relay with a width of 10mm and a height of 12.5mm. It features high insulation with an insulation distance of 8mm (between coil and contacts), a dielectric strength of 5,000VAC (between coil and contacts), and a surge voltage withstand of 10,000V (between coil and contacts). Typical applications include smart meters and energy-saving devices. Please feel free to contact us for inquiries. 【Features】 ■ Compact relay with a width of 10mm and a height of 12.5mm ■ High insulation ・ Insulation distance: 8mm (between coil and contacts) ・ Dielectric strength: 5,000VAC (between coil and contacts) ・ Surge voltage withstand: 10,000V (between coil and contacts) * For more details, please download the PDF or feel free to contact us.

• relay

The "NY" is an ultra-slim type with a width of 5mm and a mounting area of only 100mm², weighing 3.5g, making it suitable for ultra-miniaturization and lightweight equipment. It features an easy-to-design SIL (Single in Line) terminal arrangement. With twin contacts made of gold-plated silver alloy, it achieves high reliability across a wide range from low levels up to 5A, excelling in contact reliability. Additionally, it boasts high insulation with a surge voltage rating of 5080V and an insulation voltage of AC3000V (between coil and contacts). 【Features】 ■ A mounting area of only 100mm² and a weight of 3.5g, ideal for ultra-miniaturization and lightweight equipment ■ Low power consumption with a rated power of 120mW and a sensitivity power of 54mW, making it an ultra-high sensitivity relay ■ High reliability across a wide range from low levels to 5A with twin contacts made of gold-plated silver alloy, excelling in contact reliability ■ Certified to UL (508, 1604) and CSA standards *For more details, please download the PDF or feel free to contact us.

• relay

The "RY" is a signal miniature relay that achieves low power consumption with a unique high-efficiency magnetic circuit, featuring a general excitation power of 75mW and a coil rated power consumption of 150mW. It is available in a series with a high voltage type (RY-WF type) that has an insulation voltage of over AC 1,000V between open contacts. The twin contacts made of gold-plated silver-palladium provide high contact reliability. Additionally, it has a plastic sealed structure that allows for complete washing. 【Features】 ■ Achieves low power consumption with a general excitation power of 75mW and a coil rated power consumption of 150mW ■ UL and CSA standards certified ■ Complies with FCC standards (Part 68) ■ Insulation voltage of over AC 1,000V between coil contacts and adjacent contacts, with the same surge voltage rating of 1,500V *For more details, please download the PDF or feel free to contact us.

• relay

The "SJ" is a compact type solid-state relay that is ultra-small and lightweight, with a height of 12.8mm. It features a highly reliable design with built-in noise protection (for AC loads) and reverse connection protection elements (for DC loads) on the load side. The input-output isolation achieves high insulation of 2500Vrms through opto-isolation. Additionally, it excels in environmental resistance, vibration resistance, and shock resistance, and is suitable for automatic mounting and washing. Please feel free to contact us for inquiries. 【Features】 ■ High-density mounting with a height of 12.8mm ■ Suitable for space-saving ■ External dimensions and terminal arrangement are fully compatible with our JY type relays ■ Achieves high insulation of 2500Vrms through opto-isolation between input and output ■ Ideal for long life, high-speed and high-frequency switching, and high-precision control *For more details, please download the PDF or feel free to contact us.

• relay

The "SN" is an ultra-slim and high-density I/O module that measures 5 (width) × 20 (length) × 17 (height) mm and weighs 3.5g. It features suitable DC input (white), AC input (ivory), DC input (red), and AC input (black) for interfacing between the CPU and load, all within the same module, allowing for flexible combinations based on the type of load. With complete solid-state design, it achieves long life and maintenance-free operation, and it operates silently, making it ideal for high-frequency switching and control. 【Features】 - Suitable DC input (white), AC input (ivory), DC input (red), and AC input (black) for interfacing between the CPU and load, all within the same module, allowing for flexible combinations based on the type of load. - Fully compatible in size and terminal arrangement with our NY type relay. - Achieves high insulation with 2,500 Vrms through opto-isolation between input and output. - Complete solid-state design ensures long life and maintenance-free operation. - Operates silently, making it ideal for high-frequency switching and control. *For more details, please download the PDF or feel free to contact us.

• relay

The "SY" is a miniature relay with dimensions of 7.4 (width) × 12.5 (length) × 9.5 (height) mm and weighs only about 1.7 g, making it suitable for miniaturization, lightweight design, and high-density mounting of devices. Thanks to its unique high-efficiency magnetic circuit and spring configuration, it achieves a coil power consumption of 75 mW, ensuring low power consumption. The contacts use gold-plated silver-palladium, which offers excellent contact reliability, and it is available in single and double contact types, allowing for signal switching from low levels up to 1A. The dielectric strength between the coil and contacts is AC 1,000V, and the surge voltage withstand is 1,500V. Additionally, it can be used at ambient temperatures up to +90°C when the rated voltage is applied at signal levels. 【Features】 ■ Ultra-compact and lightweight ■ UL and CSA certified ■ Compliant with FCC standards (Part 68) ■ Ultra-high sensitivity, high reliability, low power consumption type ■ Wide operating ambient temperature range *For more details, please download the PDF or feel free to contact us.

• relay

The "JS-KS" is a power relay that is strong against inrush currents of 10A for a single pole. The insulation distance between the coil and the contacts is 8mm, with a dielectric strength of 5,000VAC and a surge voltage withstand of 10,000V, making it a compact yet highly insulated design. It is also suitable for applications such as I/O modules, timers, heater control, and air conditioning units. 【Features】 ■ Single pole 10A, 1a (1 make) contact ■ Can handle inrush currents of 65A and switch lamp loads of 1,000W with silver-tin oxide contacts ■ Ultra-compact low-profile relay with a height of 12.5mm and a mounting area of 290mm² ■ Power consumption of 220–290mW ■ UL and CSA certified *For more details, please download the PDF or feel free to contact us.

• relay

The "JS" is a power relay that has obtained UL, CSA, VDE, and CQC standards. The insulation distance between the coil and contacts is 8mm, with a dielectric strength of 5,000VAC and a surge voltage resistance of 10,000V, making it a compact yet highly insulated design. Additionally, the contact materials available include silver-tin oxide alloy, silver-nickel, and gold-plated options. 【Features】 ■ 1-pole high capacity 8A, 1a (1 make), 1c (1 transfer) contacts ■ Compact low-profile relay with a height of 12.5mm and a mounting area of 290mm² ■ Power consumption of 220 to 290mW ■ Complies with UL, CSA, VDE, and CQC standards ■ Compact yet highly insulated design *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-V1" is an onboard relay for 12V battery vehicles, featuring a single pole 210A 1 From B relay. It is a slim, double-wound latching type that can withstand ambient temperatures of up to 125°C, allowing for continuous current flow of 210A (@85°C) / 120A (@125°C). It is also suitable for applications such as battery and capacitor disconnection and protection, as well as dual power switching. 【Features】 ■ 12V battery vehicle single pole 210A 1 From B relay ■ Slim double-wound latching type ■ Continuous current flow of 210A (@85°C) / 120A (@125°C) ■ Low contact resistance: below 0.6mΩ (initial value, at 1A) ■ Supports ambient temperatures up to 125°C *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-P7" is a compact, low-profile 1c (1 transfer) type silent relay for automotive electrical equipment. By adopting a unique silent mechanism, it achieves an average sound pressure of 45dB (at a distance of 5cm). Despite its small size, it can handle 25A of current (for 1 hour), making it suitable for applications such as wipers and seat heaters. 【Features】 ■ Compact, low-profile 1c (1 transfer) type ■ Low operating noise ■ High capacity ■ Through-hole type *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-P5" is a silent relay for automotive electrical equipment that enables quiet operation as well as compact and high-density mounting due to its unique structure. Thanks to its single cover structure, it excels in heat dissipation and can handle continuous current for over one hour at 25A. Additionally, the terminal arrangement, which completely separates the coil and contact systems, has been designed to facilitate easy pattern design. 【Features】 ■ Ultra-compact silent relay ■ Low operating noise ■ Compact and high-density mounting ■ High sensitivity with low power consumption ■ High capacity *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-P4" is a twin relay for automotive electronics designed with a completely separated coil and contact system, making pattern design easier. By adopting proven high-capacity contact materials as standard, it achieves DC14V-25A and 100,000 cycles while being compact, even under motor lock loads. Additionally, to allow for versatile use on the same circuit board, it features a compatible terminal arrangement with our silent twin relay, the FTR-P2. 【Features】 ■ High capacity ■ Energy-saving ■ Easy pattern design ■ Compatible with automatic mounting *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-P3 (for 24V battery vehicles)" is a compactly designed single-pole 6A automotive relay suitable for high-density mounting. The terminal arrangement, with complete separation between the coil and contact systems, facilitates pattern design and supports automatic mounting. Additionally, it is well-suited for applications such as passive start and passive entry systems in 24V battery vehicles. 【Features】 ■ 1-pole 6A transfer relay for 24V battery vehicles ■ Compact design suitable for high-density mounting ■ High-capacity contacts made from proven materials (100,000 cycles at 6A-28VDC) ■ Achieves low power consumption of 900mW ■ Overvoltage cutoff type with a contact gap of 0.6mm *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-P3 (for 12V battery vehicles)" is a single-pole 25A automotive relay compatible with automatic mounting. It is designed with a terminal arrangement that completely separates the coil and contact circuits, making pattern design easier. A version that supports overcurrent interruption with a contact gap of 0.6mm is also available in the lineup. 【Features】 ■ 12V battery vehicle single-pole 25A transfer relay ■ Overvoltage interruption version is also available in the series ■ High stand-off (1.3mm) reflow-compatible products are included ■ Plastic sealed type ■ Through-hole type *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-P2" is a silent twin relay for 12V battery vehicles, featuring 1 pole x 2, 25A for automotive electrical equipment. By adopting a unique silent mechanism, it achieves noise reduction and significantly reduces the propagation of operating noise in the PCB mounted state. Additionally, it employs an H-bridge terminal structure suitable for forward and reverse circuits such as power windows and door locks, making pattern design easier. 【Features】 ■ Ultra-compact silent twin relay ■ Low operating noise ■ Compact and high-density mounting ■ High sensitivity low power consumption type ■ High capacity *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-MY (150mW)" is a slim-type power relay with a single pole rated for 5A switching. It achieves high insulation with an electric strength of AC3000V, surge withstand of 5080V, a clearance distance of over 5.15mm, and a creepage distance of over 5.89mm. Additionally, it features a super slim low-profile design with a width of 5mm, height of 12mm, and a mounting area of 100mm², making it suitable for compact and high-functionality devices. 【Features】 ■ Rated power consumption of 150mW, operating power consumption of 74mW ■ Utilizes cadmium-free twin contacts made of gold-plated silver alloy, offering excellent contact reliability and environmental performance ■ Achieves high insulation with an electric strength of AC3000V and surge withstand of 5080V ■ High insulation with a clearance distance of over 5.15mm and creepage distance of over 5.89mm ■ Through-hole type *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-MY" is a slim-type power relay featuring a single pole with a 5A switching capacity, utilizing cadmium-free twin contacts made of gold-plated silver alloy, which excels in contact reliability and environmental performance. With a width of 5mm, a height of 12mm, and a mounting area of 100mm², it is an ultra-slim low-profile design suitable for compact and high-functionality equipment. Additionally, it achieves high insulation with an insulation voltage of AC3000V, surge withstand voltage of 5080V, a clearance distance of over 5.15mm, and a creepage distance of over 5.89mm. 【Features】 - Low coil power consumption of 110mW with high sensitivity - Utilizes cadmium-free twin contacts made of gold-plated silver alloy, excelling in contact reliability and environmental performance - Achieves high insulation with an insulation voltage of AC3000V and surge withstand voltage of 5080V - High insulation with a clearance distance of over 5.15mm and a creepage distance of over 5.89mm - Through-hole type *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-LY" is a slim-type power relay with 1 pole and 6A rating. It is available in both board-mounted and socket-compatible types. The insulation distance between the coil and contacts is 8mm for both creepage and air, with a dielectric strength of 4,000VAC and a surge voltage withstand of 6,000V, achieving a high insulation design despite its small size. Additionally, we offer models that comply with explosion-proof standards (ANSI/ISA12.12.01), and we have obtained UL, CSA, and VDE certifications. 【Features】 ■ 1 pole high capacity 6A 1a (1 make), 1c (1 transfer) contacts ■ Slim relay with a width of 5.0mm, weight of 5.0g, and mounting area of 140mm² ■ Power consumption of 170mW ■ Certified to UL, CSA, and VDE standards ■ High insulation design despite its compact size *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K3 (for solar power generation equipment)" is a compact slim-type power relay with 1-pole options of 25A and 32A. It features a contact gap of 1.5mm or more, in compliance with the European solar power standard VDE0126, and also offers options with a gap of 1.8mm or more. Additionally, it is well-suited for applications in solar power generation equipment (power conditioners) and UPS (uninterruptible power supplies). 【Features】 ■ Compact slim-type power relay ■ Contact ratings of 25A 250VAC and 32A 250VAC in a series ■ Options with contact gaps of 1.5mm or more and 1.8mm or more ■ High surge voltage resistance (between coil and contacts) of 8.5kV (for 25A type) and 6.0kV (for 32A type) ■ Through-hole type *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K3L (for smart meters)" is a power relay with a single pole, 32A, and a 1a (1 make) latching type. It allows for secure mounting with M4 screws, has an insulation voltage of 4,000VAC, and a surge voltage of 6,000V, all in a compact design. Additionally, it meets the specifications required for overseas smart meters. 【Features】 ■ Single pole, 32A, 1a (1 make) contact latching relay ■ Secure mounting with M4 screws ■ Complies with overseas smart meter specifications ■ Through-hole type ■ Flux-free type ■ Plastic material: flame-retardant UL94V-0 *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K3L (Wide Gap)" is a latching type power relay that contributes to energy saving in devices. It is a compact slim type power latching relay capable of switching 25A (WG type) and 32A (PV type). Additionally, it complies with the European photovoltaic standard VDE0126, with a contact gap of 1.5mm or more. 【Features】 ■ A compact slim type power latching relay capable of switching 25A (WG type) and 32A (PV type) ■ Contact gap of 1.5mm or more (compliant with European photovoltaic standard VDE0126) ■ Surge voltage between contacts of 2.5kV (compliant with EN61810-1) ■ Latching type that contributes to energy saving in devices (dual coil) *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K3L" is a touching type power relay that contributes to the energy-saving of devices. The insulation distance between the coil and contacts is 6.4mm, the creepage distance is 9.5mm, with a dielectric strength of 5,000VAC and a surge voltage withstand of 8,500V, featuring a compact high insulation design. It is suitable for applications such as air conditioners, water heaters, refrigerators, and office automation equipment. 【Features】 ■ Compact slim type power latching relay with a contact rating of 25A 250VAC ■ Maximum continuous current of 30A ■ Latching type (dual coil) that contributes to energy saving of devices ■ Compact high insulation design ■ Through-hole type (with tab terminal option) *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K3" is a compact slim-type power relay designed for heavy load control with a rating of 20A/25A. It features a series of contact terminals with #250 tab terminals and printed circuit board terminals, designed for high insulation (between coil and contacts). It includes models compatible with glow wire (-GW). 【Features】 ■ Compact slim-type power relay ■ Series of contact ratings: 20A 250VAC, 25A 250VAC ■ Series of contact terminals with #250 tab terminals and printed circuit board terminals ■ Compact insulation design (between coil and contacts) ■ Low power consumption design with a coil rated power consumption of 780mW *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K2G" is a power relay with a peak inrush current switching capability of 120A. It features a contact gap of 3.0mm or more, an insulation distance between the coil and contacts of 8.0mm or more in air, 9.5mm or more along the surface, a dielectric strength of 5,000VAC, and a surge voltage withstand of 10,000V, all designed for high insulation. It is also suitable for applications such as power supply and interlock control. 【Features】 ■ 1 pole 20A 1a (1 make) contact ■ Contact gap of 3.0mm or more (cULus, VDE certified) ■ Peak inrush current switching capability of 120A ■ cULus TV-8 rating certified ■ High insulation design *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K2" is a power relay that has obtained a TV-5 rating, which is strong against inrush current. The insulation distance between the coil and contacts is 6mm, with a dielectric strength of 4,000VAC and a surge voltage resistance of 10,000V, achieving high insulation in a compact design due to its reinforced insulation structure. Additionally, it is a small slim type with a height of 25mm and a mounting area of 275mm², making it suitable for applications such as power switching, industrial equipment control, and home appliances. 【Features】 - 1 pole 16A 1a (1 make) contact - Obtained a TV-5 rating, strong against inrush current - Series includes a contact gap of 1.0mm for interlock applications - Power consumption of 530mW - Small slim type with a height of 25mm and a mounting area of 275mm² *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K1 (10A High Sensitivity)" is a power relay with a consumption power of 250mW, featuring 1 pole with 10A 1a (1 make) and 1c (1 transfer) contacts. It supports an operating ambient temperature of 85°C (3.5mm pitch) and 105°C (5.0mm pitch), and has obtained UL insulation class F. Additionally, the insulation distance between the coil and contacts is 10mm, with a dielectric strength of 5,000VAC and a surge voltage resistance of 10,000V, making it a compact yet highly insulated design. 【Features】 - 1 pole with 10A 1a (1 make) and 1c (1 transfer) contacts - Operating ambient temperature of 85°C (3.5mm pitch) and 105°C (5.0mm pitch) - Consumption power of 250mW - Low-profile relay with a height of 15.7mm and a mounting area of 368mm² - Obtained UL insulation class F *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K1(20A)" is a low power consumption power relay with a single pole 20A 1a (1 make) contact, consuming approximately 400mW. The insulation distance between the coil and the contact is 10mm, with a dielectric strength of 5,000VAC and a surge voltage withstand of 10,000V, featuring a high insulation design. 【Features】 ■ Single pole 20A 1a (1 make) contact ■ Low-profile relay with a height of 15.7mm ■ High insulation design ■ UL insulation class F certification ■ Low power consumption of approximately 400mW *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K1 (16A inrush 120A)" is a power relay with a single pole 16A 1a (1 make) and 1c (1 transfer) contact, capable of controlling a peak inrush current of 120A. Additionally, it features a compact yet high insulation design, with a dielectric strength of 5,000VAC and a surge voltage resistance of 10,000V. 【Features】 ■ Single pole 16A 1a (1 make), 1c (1 transfer) contact ■ Control capability for peak inrush current of 120A (make side) ■ UL TV-8 rating obtained (make side) ■ Coil insulation class F ■ Low-profile relay with a height of 15.7mm and a mounting area of 368mm² *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K1(16A105℃)" is a low-profile relay with 1 pole, 16A, 1a (1 make), and 1c (1 transfer) contacts, measuring 15.7mm in height and occupying a mounting area of 368mm². Despite its compact size, it features a high insulation design with a coil-to-contact insulation distance of 10mm, a dielectric strength of 5,000VAC, and a surge voltage withstand of 10,000V. It includes models compatible with glow wire (-GW) and meets the glow wire test (GWT) requirements specified for relays in IEC/EN 60335-1. It is well-suited for heater control and oven ranges. 【Features】 - 1 pole, 16A, 1a (1 make), and 1c (1 transfer) contacts - Capable of operation at high temperatures with an ambient temperature rating of 105℃ - Includes models compatible with glow wire (-GW) - Low power consumption type with a power consumption of 400mW - Low-profile relay with a height of 15.7mm and a mounting area of 368mm² *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K1 (16A inrush 80A)" is a power relay with 1 pole, 16A, 1a (1 make), and 1c (1 transfer) contacts. It can control inrush current with a peak of 80A. It is available as a glow wire compatible product (-GW). Additionally, despite its compact size, it features a high insulation design, with an insulation distance of 10mm between the coil and contacts, withstand voltage of 5,000VAC, and surge voltage of 10,000V, achieving UL insulation class F. 【Features】 ■ 1 pole, 16A, 1a (1 make), 1c (1 transfer) contacts ■ Control capability for peak inrush current of 80A (make side) ■ UL TV-5 rating obtained (make side) ■ Low power consumption of 400mW ■ Low-profile relay with a height of 15.7mm and a mounting area of 368mm² *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K1 (16A silver-nickel contacts)" is a power relay with 1 pole, 16A, featuring 1a (1 make) and 1c (1 transfer) contacts. It is designed for low-level load applications, with silver-nickel contacts, a height of 15.7mm, and a footprint of 368mm², making it a low-profile relay. Additionally, despite its small size, it has a high insulation design, with an insulation distance of 10mm between the coil and contacts, a dielectric strength of 5,000VAC, and a surge voltage withstand of 10,000V. 【Features】 ■ 1 pole, 16A, 1a (1 make), 1c (1 transfer) contacts ■ Low-level load compatible silver-nickel contacts ■ Power consumption of 400mW ■ UL insulation class F certification ■ High insulation design despite its compact size *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-K1(12A)" is a power relay with 1 pole, 12A, 1a (1 make), and 1c (1 transfer) contacts. Despite its small size, it features a high insulation design with an insulation distance of 10mm between the coil and contacts, a dielectric strength of 5,000VAC, and a surge voltage withstand of 10,000V. It has obtained UL insulation class F. 【Features】 ■ 1 pole, 12A, 1a (1 make), and 1c (1 transfer) contacts ■ Available in 3.5mm and 5.0mm pitch ■ Power consumption of 400mW ■ Low-profile relay with a height of 15.7mm and a mounting area of 368mm² ■ Obtained UL insulation class F *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-J2" is a power relay capable of switching high voltage DC loads of 10A, 450VDC (in series connection within the same load) and 10A, 200VDC (when contacts are used independently). Despite its compact size, it features a high insulation structure with a dielectric strength of 4,000VAC, surge withstand of 10,000V, and creepage/clearance distances of 6mm/6mm. It is suitable for high voltage DC power supply systems, uninterruptible power supplies (UPS), and electric vehicle pre-charge circuits. 【Features】 - Capable of switching 10A, 450VDC or 10A, 200VDC loads - Uses magnetic arc suppression - Inrush current of 150A (for one load circuit) - Initial contact drop voltage: less than 0.1V/contact (at 10A current, between contact terminals) - UL insulation class F certification *For more details, please download the PDF or feel free to contact us.

• relay

The "FTR-H2" is a power relay with a single pole, 10A, and 1a (1 make) contact. It is a power relay that standardly meets the TV-5 rating, which is strong against inrush current, with a power consumption of 530mW, and a high-sensitivity type (250mW) is also available in the series. Additionally, due to its reinforced insulation structure, it is compact yet highly insulated, with an insulation distance between the coil and contacts of 6mm, a dielectric strength of 4,000VAC, and a surge voltage resistance of 10,000V. 【Features】 ■ Single pole, 10A, 1a (1 make) contact ■ Standardly meets the TV-5 rating, strong against inrush current ■ Power consumption of 530mW, high-sensitivity type (250mW) also available in the series ■ Compact yet highly insulated due to reinforced insulation structure ■ Through-hole type *For more details, please download the PDF or feel free to contact us.

• relay