ナガイ List of Products and Services

Suprema SA-FSF2-DB is a fusion multimodal terminal equipped with unparalleled facial recognition performance. You can experience the exceptional authentication accuracy and anti-spoofing performance achieved through Suprema's proprietary Fusion technology.

• Entrance and exit control system

The "Slope Build" is a retractable portable slope that can be rolled up and stored upright. It can be compacted, allowing even longer types to be loaded into a car trunk. The rail plates can be easily attached and detached with bolts and nuts, allowing for adjustments to the dimensions on-site at 15 cm intervals. In addition to regular usage, it can also be used in "bridge" or "mountain" configurations, and it can be laid down on uneven surfaces such as gravel roads, snow, or grass, making it possible to use as a pathway for wheelchairs and walkers. 【Features】 ■ Compatible with various sites ■ Easy setup by simply unfolding ■ Optional use allows for an additional 15 cm of ramp length ■ Can be extended up to approximately 4 meters, suitable for permanent outdoor installation ■ Three usage methods available (standard / bridge / mountain) ■ Available in two types: single and double *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• others

The "DS-K1TA70MI-T" is a facial recognition reader with a body surface temperature measurement function that can measure body surface temperature before entering a facility by being installed at entrances and exits. When an abnormal temperature is detected, it provides an audio alert and can control the opening and closing of the door based on the abnormal temperature measurement. Additionally, if the user is not wearing a mask, it will issue a verbal warning. 【Features】 ■ Temperature measurement range: 30℃ to 45℃ ■ Measurement error: ±0.3℃ ■ Recognition distance: 0.5 to 1.5m ■ Displays temperature measurement results simultaneously on the authentication result screen ■ Provides an audio alert when an abnormal temperature is detected *For more details, please refer to the PDF document or feel free to contact us.

• Personal authentication
• Other measurement, recording and measuring instruments

"Ecomo" is an energy-saving unit that reduces electricity consumption by 5 to 15% at the transformer unit level. The "free electrons" emitted by tourmaline facilitate the flow of electricity. Installation is very simple; it only requires connecting to the secondary side of the transformer. Since no electricity flows through the main unit, there is almost no risk of failure. 【Features】 ■ Patented under the name "Power Improvement Device" ■ Expected to reduce electricity consumption by 5 to 15% ■ Investment recovery possible in about 3 to 5 years ■ Proposes energy savings at the "transformer unit" level for power, enabling energy efficiency for the entire facility (※200V, 400V power transformers) *For more details, please refer to the PDF document or feel free to contact us.

• Other energy equipment

The "SINTERIT LISA series" is a desktop-sized SLS (Selective Laser Sintering) 3D printer that shapes high-performance general-purpose engineering plastic "nylon." With an energy-efficient sintering system using LED lasers and simplified material supply, the device has been miniaturized. You can start powder sintering 3D printing in a space-saving and cost-effective manner. You can choose between two models: the "LISA-PRO," which supports nitrogen filling in the build chamber and can shape PA11 nylon, and the more affordable basic model "LISA." 【Features】 ■ Six types of materials to choose from based on application ■ Shapes high-performance general-purpose engineering plastic "nylon" ■ Support-free and hassle-free printing ■ Print without worrying about running costs ■ Two models available: "LISA-PRO" and "LISA" *For more details, please refer to the PDF document or feel free to contact us.

• 3D Printer
• Printer

The "Coherent Creator" is a metal 3D printer designed for small workpieces that achieves high-quality metal prints. It offers excellent cost performance with its well-equipped standard features. Boasting reliable machine specifications that realize high speed and high precision, it brings together the advanced technological capabilities of Coherent, a company renowned for its laser oscillation devices. 【Features】 ■ Print area suitable for small workpieces ■ Ideal operation categorized by material type ■ High cost performance with robust standard capabilities ■ Adoption of high-quality fθ lenses for distortion-free precision sintering ■ User-friendly interface that is easy to understand at a glance *For more details, please refer to the PDF document or feel free to contact us.

• 3D Printer
• Printer

We handle the new desktop 3D printer 'Form 3/3L' from Formlabs. It has developed a completely new printing method that further evolves the SLA process, allowing for printing with more stable accuracy. Various technologies have been adopted to achieve high-quality prints, including a laser system that can uniformly illuminate the entire print area and a resin tank that reduces the load on the model. 【Features】 ■ Unique next-generation printing method "LFS" ■ Further evolved laser unit "LPU" ■ Light-touch support to reduce the hassle of support removal ■ Increased and enhanced sensors to support stable printing ■ One-click settings with the print control software "PreForm" *For more details, please refer to the PDF document or feel free to contact us.

• 3D Printer
• Printer

The "Elide Fire Ball" is a fire suppression aid that emits an alarm through a pyrotechnic effect (explosion sound and shock) when a fire occurs, while simultaneously dispersing the contained extinguishing agent to put out the fire. It is compact and can be installed in various locations without requiring specific installation sites. It is lightweight and easy to carry, and simply throwing it can extinguish an initial fire almost instantly. Additionally, the extinguishing agent is primarily composed of ammonium phosphate, similar to powder fire extinguishers, and is effective against Class A, B, and C fires. 【Features】 ■ The product bursts approximately 3 seconds after coming into contact with fire, dispersing the extinguishing agent along with an alarm sound. ■ The usage method is simple: throw, roll, or install. ■ The extinguishing effect is effective against Class A, B, and C fires, similar to a fire extinguisher. ■ There is no human dependency in initial fire suppression. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "F-CART2×4" is a 2-in-1 cart that does not require changing carts for different scenes, allowing for two wheels in narrow spaces and four wheels for transporting large loads. The load capacity is 70 kg when using two wheels and 120 kg when using four wheels. The specifications include fixed wheels of 127 mm and swivel wheels of 86.5 mm. The handle and lever are linked to the wheels, making it easy to operate. 【Features】 ■ Transforms between two wheels and four wheels ■ Compact design with a thickness of 130 mm when stored ■ No need to change carts for different scenes ■ Easy operation due to the handle and lever being linked to the wheels *For more details, please refer to the PDF document or feel free to contact us.

• others
• Trolley

Our company handles the non-contact thermometer and disinfectant machine 'Pittoshu'. It quickly detects movement with an infrared sensor and sprays disinfectant. With a large capacity of 1.2L, it notifies you on the LCD screen when the remaining amount is below 20ml. Additionally, the temperature measurement sensor detects temperature quickly and non-contact, making it useful in various places such as offices, schools, hospitals, and restaurants. 【Features】 ■ Quickly detects temperature non-contact ■ Liquid amount can be adjusted in four levels ■ Quickly detects movement and sprays disinfectant ■ Large capacity of 1.2L ■ Notifies on the LCD screen when the remaining amount is below 20ml ■ Can be used as a power source with a USB Type-C port *For more details, please refer to the PDF document or feel free to contact us.

• others
• Other safety and hygiene products

Our company handles heating devices and fans from Chrester. We offer a lineup that includes the "Salamander Series," which is less likely to cause burns when touched, the "Pegasus Series," which is a 100V model that can be installed anywhere, and the "Air Purifying Slim Tower Fan," which has a built-in air purification filter that blows clean air. Additionally, the Chrester infrared heater "Pegasus/Fairy Series" has an IP65 protection rating (waterproof performance). 【Chrester's Commitment】 - Uses carbon heaters that excel in durability and heating performance - Waterproof performance that enables outdoor use - Internal reflective panels that maximize efficiency and minimize electricity waste - Aluminum double-structure design that exhibits excellent insulation properties - Uses PSE-certified wiring that is flame-retardant and heat-resistant *For more details, please refer to the PDF document or feel free to contact us.

• air conditioning
• Other air conditioning equipment
• others

"Ilias" is an automatic tracking composite authentication system that realizes high-speed dual-eye iris recognition (within 1 second after image acquisition) and facial recognition. It uses an LCD touch display that shows a selfie as the user interface, automatically measuring the user's position and guiding them to the appropriate distance through audio and color displays, providing ease of use. 【Features】 ■ AI deep learning enables image acquisition even when wearing masks or hats, and speeds up the process ■ Completely contactless: minimizes the effects of temperature, humidity, brightness, and aging ■ Easy-to-understand guidance through a color LCD that anyone can use immediately ■ The camera automatically rotates to track the eyes according to the user's height (auto tilt) ■ Combination authentication is possible with face, iris, contactless cards, PIN, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products
• Other security and surveillance systems
• Entrance and exit control system

Our company offers the "Water Stop Master Series," a lineup of water stop products that can be quickly and easily installed to prevent flooding damage caused by the recent frequent heavy rains. The BX water stop board "Rakusset" can be installed without any construction, as it is simply fixed with hardware, making it suitable for various openings. It can be set up in about 2 minutes even during sudden heavy rain, reducing the risk of flooding damage. Additionally, the "Aquaed" is a cost-effective water stop door that also complies with specific fire protection equipment. 【Features of BX Water Stop Board "Rakusset"】 ■ Fixed with hardware only ■ Can be introduced without construction for various openings ■ Allows opening and closing of the door after installation ■ Can be installed in about 2 minutes even during sudden heavy rain ■ Reduces flooding damage *For more details, please refer to the related link page or feel free to contact us.

• others
• Other safety and hygiene products

In recent years, due to changes in production, distribution, and work styles, the food manufacturing industry is increasingly required to ensure safety. The "i-PRO EXTREME Series" is a security system that monitors and oversees the entrances and exits of food manufacturing sites, the production process, and warehouses. It enhances corporate value through food defense that realizes "food safety," and also contributes to "employee reassurance" and "increased productivity." 【Features】 ■ Food Safety - Crime prevention measures against unauthorized intrusions - Avoidance of foreign object contamination risks ■ Employee Reassurance - Prevention of accidents during work - Work records in the event of an accident *For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems
• Other security
• others

The "FF Mirror" is a mysterious mirror that is flat yet offers a wide field of view. Simply by placing it at eye level, it helps prevent collisions in various passageways such as hospitals, offices, schools, factories, public facilities, and commercial establishments. For situations where you want to see one side of a passageway, such as in an L-shaped or wide T-shaped intersection, we offer a "one-sided" option. For narrow T-shaped intersections or stair landings where you want to see both sides of a passageway, we provide a "both-sided" option. 【Features】 ■ Easy to install at eye level ■ Blind spots naturally come into view just by looking straight ahead ■ Helps prevent collisions in various passageways ■ Available in "one-sided" and "both-sided" options *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products
• others

"FLASHWALL" is a waterproof fence specifically designed for adhesive glass surfaces such as automatic doors. It can be easily installed by simply adhering it to the glass surface without the need for prior construction. There is no need for construction procedures or applications in tenant buildings. Additionally, it features a lightweight and compact design that can be stored in a dedicated case, allowing it to be taken out and used only when necessary, and the adhesive parts can be replaced. 【Features】 ■ Self-supporting design that utilizes the power of water ■ Lightweight and compact design that can be stored in a dedicated case ■ Can be taken out and used only when necessary ■ Protects property from flood damage with minimal investment *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products
• others

"FLASH WALL" is a new type of simple water stop fence designed for Japan, based on the patented technology of Aqua Fence. It features a self-supporting design that utilizes the power of water, allowing for easy installation on doors and similar openings within the width of the main body. It can be installed in various locations such as concrete, glass, and wood, and it supports suction cup mounting (on surfaces that can be adhered to, such as glass and metal). 【Features】 - Easy assembly in 5 steps (approximately 5 minutes for one person) - Lightweight and durable - Can be stored in a dedicated bag (stackable) - Suitable for installation in various locations - Can be connected using L-shaped panels - Protects property from flood damage with minimal investment *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products
• others

Our company handles earthquake-resistant products from Rintec 21. We offer a range of products to protect businesses from offices to factories and research labs, including "Cast It," which simply fits onto the casters of multifunction printers, "Bottom Holder A," which secures furniture without using anchor bolts, and "Dolly Stopper." We respond to corporate BCP needs with strong earthquake resistance through "adhesion & friction." 【Product Lineup (Excerpt)】 ■ Cast It ■ Link Foot (Small) ■ Desktop Printer Stopper P ■ Link Holder (for Servers) ■ Thin Monitor Stopper *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products
• others

We propose a "surveillance camera system" for production and food factories. It is capable of optical 40x zoom shooting, allowing for clear confirmation of hand movements and work analysis. Additionally, it can capture 360° all-around views, utilizing fisheye and panorama modes to understand the flow, and can be combined with fixed cameras to reduce blind spots. 【Features】 ■ Capable of optical 40x zoom shooting ■ Allows for clear confirmation of hand movements and work analysis ■ Capable of 360° all-around shooting ■ Understands the flow with fisheye and panorama modes ■ Reduces blind spots when combined with fixed cameras *For more details, please refer to the related link page or feel free to contact us.

• Other security and surveillance systems
• Other security
• Other safety equipment

The "Heat Spot" is a commercial heating device manufactured by Suiden. The lamp lights up during operation to prevent forgetting to turn it off, and it has a built-in safety device that stops operation in case of accidental tipping. Additionally, the thermal switch stops operation in the event of abnormal overheating. We offer a lineup including the high-performance standard type "SEH-15A-2," a twin type that covers a wide area, and a high-power triple type. 【Features】 ■ One-touch switching (single type) ■ Operation lamp ■ Angle adjustment (twin and triple types) ■ Caster mobility (twin and triple types) ■ Safety device *For more details, please refer to the PDF materials or feel free to contact us.

• Other office supplies

The "Air Design Card" is a portable card-type air purifier and deodorizer. It generates ions and far-infrared rays through special processing using natural minerals, exhibiting various effects. Despite being a card, it can purify the surrounding area within 2 meters just by wearing it. Additionally, it has a long lifespan of about 3 years, making it economical. 【Features】 ■ Portable card-type air purifier and deodorizer ■ Generates ions and far-infrared rays through special processing using natural minerals ■ Purifies the surrounding area within 2 meters just by wearing it ■ Long lifespan of about 3 years, making it economical ■ Entirely made in Japan from raw materials to production *For more details, please refer to the PDF document or feel free to contact us.

• Air purifiers
• Other safety and hygiene products

"Number-I" is software for automatic recognition of vehicle license plates compatible with network cameras. It can recognize from up to six cameras using a single computer. Equipped with a high-performance recognition engine, it also supports plates with designs and alphanumeric classification numbers. It can be utilized in various scenarios such as improving customer service, streamlining operations, and enhancing security. 【Features】 ■ Continuously evolving high-performance recognition engine ■ Achieves system integration with minimal effort ■ Simultaneous license plate recognition from multiple cameras ■ Highly expandable system ■ Easy-to-use application *For more details, please refer to the PDF document or feel free to contact us.

• Image analysis software
• Software (middle, driver, security, etc.)
• Color camera

The step elimination device "Dream Stage Series" manufactured by Sugiyasu, which we handle, meets customer needs and delivers a safe and comfortable living experience. The lightweight design "NDK18H/NDK18L," which can be used anywhere, can be transported and assembled by one person. The frame is covered with a bellows on all four sides to prevent pinching accidents involving children or caregivers in advance. The "DK20JN/DK20HJN," with a minimum height of just 1cm, features a user-friendly design with easy operation. It allows for entry and exit at an angle, focusing on usability and functionality. 【Features of NDK18H/NDK18L】 ■ Suitable for rental ■ Lightweight design for use anywhere ■ Can be transported and assembled by one person ■ Straight and L-shaped entry compatible (NDK18H) ■ Four-sided bellows to prevent pinching accidents *For more details, please refer to the PDF materials or feel free to contact us.

• Other conveying machines
• Other safety equipment
• lift

The "Wheeler Bus 21" is a special bathtub series designed to reduce the burden for both caregivers and those receiving care. Starting with the "S type," which effectively utilizes space, it also includes the "D type" for a more spacious bathing experience and the "Twin," which features two bathtubs in one unit to increase operational efficiency. Moving to the bath unit is as simple as sliding the chair unit, ensuring safety while minimizing operational hassle. The elegant design and color of the main unit provide a sense of comfort. 【Features】 ■ One-touch docking for hassle-free operation ■ Two-stage reclining for added safety ■ Sophisticated shapes and colors for enhanced comfort ■ Easy rolling with lever operation ■ Simple drainage with a single lever ■ Easy and safe movement with a seat height that matches *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Shōsuke-kun Series" is a chair-type stair lift that offers easy operation and a comfortable ride. It comes in two models: the "Straight Stair Type," designed for straight stairs without landings, and the "Curved Stair Type," suitable for indoor and outdoor stairs with curves. You can customize it to suit various living scenes, supporting a safe and comfortable living space. 【Features】 ■ Comfortable usability ■ Excellent operability ■ Reliable safety ■ Easy operation ■ A reassuring ride *For more details, please refer to the PDF materials or feel free to contact us.

• Other conveying machines
• Other safety equipment

The emergency stair evacuation vehicle "Rescue Slider" manufactured by Sugiyasu, which we handle, now has a version with a standby brake. With the standby brake, you can safely and securely wait even when descending stairs or during crowded stairways. It allows for smooth rotation on the spot, making it easy to operate even in narrow landings. Additionally, the main body is lightweight and can be compactly stored when not in use. 【Features】 ■ Made in Japan ■ Easy operation ■ Safe and quick ■ Comfortable operation ■ Easy storage *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines
• Other safety equipment
• Trolley

We would like to introduce the "Parking Brake with Foot Guard" manufactured by Sugiyasu, which we handle. This product can be installed on the Bishamon brand hand pallet trucks from Sugiyasu that have been sold since July 2003. It prevents the truck from moving naturally with the parking brake, and the foot guard prevents feet from getting caught, thereby preventing accidents. Additionally, the installation time is approximately 5 minutes. 【Features】 ■ Safe and secure ■ Easy to operate ■ Parking brake - Prevents natural movement - Easy locking and unlocking of wheels with pedal operation ■ Foot guard - Prevents feet from getting caught, thereby preventing accidents *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines
• brake
• Brake parts

The "DTR10" is a compact electric towing vehicle designed to facilitate the transportation of box pallets and cage trolleys comfortably. The angle of the handle can be adjusted in three stages. It operates quietly and smoothly even on rough terrain, easily overcoming small stones and bolts that may be on the floor. 【Features】 ■ Compatible with various trolleys ■ Equipped with puncture-proof tires ■ Adjustable handle angle ■ Charging time: 8 hours ■ Travel speed: 3.2 km/h (under load) *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines
• palette
• palette

The "BXA Series" is a type of logistics equipment with electric lifting and traveling capabilities. By reducing the travel speed by half during sudden turns and when lifting the table, it minimizes the risk of cargo falling. Additionally, when turning, the steering angle of the outer wheel is larger than that of the inner wheel, employing an Ackermann steering mechanism. This feature allows for smooth turning without tire skidding. 【Features】 ■ Automatic deceleration device ■ Swivel mechanism ■ Ackermann mechanism ■ Use of puncture-proof tires *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines
• lift

The "Light Lifter" is a domestic model product that has improved safety and functionality compared to the popular "Light Lifter 90E." It features a resin table, aluminum mast, and an electric chain loop system, eliminating concerns about paint peeling or oil leaks, making it safe to use in food-related environments or places where oil is undesirable. With a single mast design, it provides ample visibility, and the rail section of the mast is constructed to prevent pinching of fingers and other objects. 【Features】 ■ Usable in clean environments ■ Lightweight and equipped with four swivel wheels for easy operation by women ■ Safe with good visibility ■ Easily lifts heavy loads *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines
• lift

The "spot air conditioner" we handle does not cool the entire room but instead sends cool air locally, resulting in less waste. It is suitable for open spaces, areas without central air conditioning, and places where cool air does not reach. Since it has the same cooling structure as a typical air conditioner, it can provide well-chilled air. Additionally, it can be easily moved and set up thanks to its casters. We also offer "factory fans," which are characterized by large blades and high air volume, as well as "exhaust and intake fans," which deliver air over long distances with high directivity. 【Features】 ■ Sends cool air locally, resulting in less waste ■ Provides well-chilled air ■ Easy to move and set up with casters ■ Filters are easy to remove and can be washed and reused ■ No installation required; just plug it in to use *For more details, please refer to the PDF document or feel free to contact us.

• air conditioning
• Other air conditioning equipment
• Cooling system

The "Cube-shaped Thermal Camera" can measure surface body temperature with an accuracy of ±0.5°C, making it suitable for primary screening at entrances of facilities with a large number of people coming and going. With its thermography function, it displays temperature in real-time on the screen. It can recognize faces while simultaneously detecting temperature using dual lenses. Additionally, the dual lenses allow for simultaneous display, making it easy to identify individuals. 【Features】 ■ Thermal resolution: 80×60 ■ Temperature detection accuracy: ±0.5°C ■ Measurable temperature range: 30°C to 45°C ■ Temperature measurement distance: 1.2m ± 0.3m ■ Alarm output on monitoring PC (warning sound and display) is also possible depending on settings. *For more details, please refer to the PDF document or feel free to contact us.

• Thermography
• Other measurement, recording and measuring instruments
• Color camera

"Chlorus Disinfectant Water" is a food additive disinfectant and deodorizer with chlorous acid (HCIO2) as its main active ingredient. It is one of the food additive disinfectants that covers the weaknesses of the widely used sodium hypochlorite disinfectant and has also obtained halal certification. It is effective for disinfecting cooking utensils, food ingredients, packaging materials, and hands. Additionally, it can be used for deodorizing drains and garbage, as well as for handling waste and vomit. 【Features】 ■ Effective against viruses, bacteria, fungi, and spores with lasting effects ■ Deodorizing effect is persistent with no odor rebound ■ Low metal corrosiveness and decolorization ■ Does not discolor melamine resin ■ Almost no chlorine odor during and after use *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

"Devirus AC" is a space sterilization device that quickly disinfects large areas. It sprays a suitable size mist with approximately 100 times the amount of a typical humidifier, allowing it to float in the air. The spraying time, standby time, and start time can be set in minutes. It is used in conjunction with chlorous acid water "Chloras Disinfection Water," which is recognized by the Ministry of Health, Labour and Welfare as a food additive. 【Features】 ■ Long-lasting suspension due to Brownian motion (proven for over 60 minutes) ■ Maximum mist output of 1200mL/h ■ Maximum spray coverage of 100m2 (with a ceiling height of 3.5m) ■ Day-of-the-week settings and other detailed configurations can be managed via a timer or smartphone ■ Despite being chlorine-based, it allows for repeated and continuous disinfection *For more details, please refer to the PDF document or feel free to contact us.

• Sterilizer
• Other safety equipment
• Other safety and hygiene products

This document introduces application examples of DataMall using illustrations, as well as examples of system configurations. "DataMall" is a web component for remote monitoring, data logging, and event reporting. This system can perform five tasks: storing, displaying, sending, remotely controlling, and reporting via email measurement data. Measurement data from the field can be checked anytime and anywhere on a smartphone. 【Contents (partial)】 ■ Regular reporting ■ Remote monitoring and control ■ Predictive and preventive maintenance ■ Management of remaining liquid levels ■ Labor-saving maintenance ■ System configuration examples, etc. *For more details, please request the document or view the PDF data from the download.

• Other security and surveillance systems

The "DataMaru DL8 Series" is a web component for remote monitoring, data logging, and event reporting. Type D has been introduced, adding two powerful features: "I/O Mapping" and "Web Screen Customization." By utilizing high-performance smartphones and the internet, an incredibly cost-effective on-site monitoring system can be realized. 【Features】 ■ Standard equipped with a web screen that is easy to view on smartphones ■ Lineup of 4 types (Display, Notify, Record, I/O Mapping) ■ Flexible types and numbers of input/output signals ■ Compatible with the latest communication infrastructure *For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems

In this document, we introduce selected new products from 2017 and Imao's recommended products. We feature the evolved knob "One-Touch Lock Knob," which combines adjustment and locking into one, as well as the "Actuator Unit" with a directional change operation, and a new type from the popular series "Flex Rotator," among others. 【Featured Products】 ■ Click Torque Knob ■ Actuator Unit ■ Ergo Arch Grip ■ One-Touch Natural Supporter ■ Compact Cam Lever ■ T-Slot Hold Down Clamp Set, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Inspection fixture
• Other machine elements
• others

At Nagai Co., Ltd., we handle reduction gears for food machinery manufactured by Tsubakimoto Chain Co. This catalog introduces various specifications, including food-grade motors with fins, food transport motors without fins, and lubricating oil-compatible machines, along with their features and options. We have included many products that meet the needs of food machinery, such as preventing oil leaks and avoiding contamination from peeling paint. [Contents] ■ Food specifications ■ Food transport specifications ■ Lubricating oil compatibility for food machinery ■ Introduction of various specifications ■ Applications *For more details, please refer to the PDF materials or feel free to contact us.

• Gearbox

The "Oil-Free Scroll Compressor" integrates an extremely compact motor with the compressor body, achieving a beltless and compact design. It can be installed in places that were previously unsuitable, such as tight spaces or right next to work sites. It contributes to various on-site needs such as productivity, energy savings, and risk mitigation. Additionally, we offer a wide range of models from 0.75kW to 30kW. 【Features】 ■ Improvement of productivity and facility environment ■ Energy savings and cost reduction ■ Risk mitigation in production sites *For more details, please download the PDF or feel free to contact us.

• Other mounting machines

The "SJ Series P1" is an inverter equipped with an intuitive "user-friendly LCD operation panel" as standard. It features a color LCD screen, making monitoring and parameter settings even easier to see and simplifying operation. Additionally, the panel mounting section has been made into a separate part (L-shaped bracket: site-compatible), allowing for flexible installation even if the main unit size differs during renewal. 【Features】 ■ Convenience pursued for ease of use ■ Drive performance that achieves quick response and smooth operation ■ Flexibility to meet diverse needs *For more details, please download the PDF or feel free to contact us.

• Inverter